AngryProton
3d8114bcfe
[FIX][fal]char设备类型补充缺失的入参,适配DFSv2框架 ( #11112 )
...
* [FIX][fal]补充缺失的入参,适配DFSv2框架
* [FIX][fal]正确声明入参的数据类型
* [chg]按审查建议修改变量类型和代码格式。
2026-01-06 17:12:55 +08:00
wdfk-prog
bd22f2fa6a
fix(dfs): align fd API declarations with DFS_USING_POSIX
2026-01-06 16:44:35 +08:00
AngryProton
7384a8e035
[FIX]Locking for dfs_dentry_dump must be consistent with that of all other dentry functions.
2026-01-06 12:03:41 +08:00
Runcheng Lu
17d026c6cc
[fix] drivers: spi: refactor SPI bit operations into independent configuration
...
- Add RT_USING_SPI_BITOPS as a separate configurable option
- Make RT_USING_SOFT_SPI depend on RT_USING_SPI_BITOPS
- Adjust build order in SConscript for proper com
Signed-off-by: Runcheng Lu <runcheng.lu@hpmicro.com >
2026-01-04 17:04:34 +08:00
Copilot
7c05661ae9
[virtio] Fix queue_sel ordering in virtio_queue_init and virtio_queue_destroy #11114
2026-01-04 16:55:19 +08:00
angryproton
df85c74265
[FIX][DFSv2][ELMFAT]解决dfs_elm_unlink在FF_VOLUMES为1时赋值drivers_fn引用未定义变量导致编译报错的问题
2025-12-27 10:46:50 +08:00
GUI
c6498b5f65
[sdio][dm] update for DM ( #11078 )
...
* [sdio][dm] import Kconfig for DM
Signed-off-by: GuEe-GUI <2991707448@qq.com >
* [sdio] fixup IRQ and mmcsd threads' stack size default
Signed-off-by: GuEe-GUI <2991707448@qq.com >
* [sdio][dm] Support DM mode
1. Support features read by DM.
2. Support regulator API in drivers.
3. Support send tuning option CMD.
4. Replace `switch_uhs_voltage` by `signal_voltage_switch`.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
* [dm][sdhci] Cleanup the SDHCI
Signed-off-by: GuEe-GUI <2991707448@qq.com >
* [sdio][dm] add new SDIO/SDHCI drivers
1. SDHCI support on PCI bus
2. Synopsys DesignWare MMC Family(MMIO/PCI)
Signed-off-by: GuEe-GUI <2991707448@qq.com >
---------
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-26 21:04:42 +08:00
angryproton
ec0c2bbbd8
[FIX][DFSv2][ELMFAT]修复多线程环境下lseek返回值概率性被篡改的问题
2025-12-26 21:03:26 +08:00
AngryProton
916b212855
[FIX]Update vnode size after writing to tmpfs
2025-12-26 15:10:48 +08:00
GuEe-GUI
9370f81ad7
[dm][include] fixup loss' header
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-22 13:24:41 +08:00
GUI
43733268c1
[dm][firmware][scmi] support ARM-SCMI interface #11069
2025-12-19 21:20:17 +08:00
laidene
d09135f76b
[components][libc][posix][libdl] Optimization: Redundant calculations in a for loop
2025-12-18 13:57:07 +08:00
GuEe-GUI
df990e91d3
[dm][power] add new drivers for power framework
...
1. GPIO poweroff/restart
2. Generic SYSCON regmap poweroff/reboot mode/reboot
3. Emulator battery(thermal)/charger
4. GPIO charger
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-17 10:29:05 +08:00
GuEe-GUI
b4d332706e
[dm][power] add power reset and supply framework
...
1. Board level reset or poweroff
2. Power supply class
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-17 10:29:05 +08:00
GuEe-GUI
9a6d515e27
[dm][serial] add new serial driver for DM
...
1. 8250 serila family (OFW, PCI, DWC, early)
2. Virtual serial (by graphic and input)
3. HVC early serial
4. ARM PL011 serial
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-16 12:41:02 +08:00
GuEe-GUI
6394797471
[dm][serial] Fixup serial tty check
...
Just return if is not a tty device, don't assert
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-16 12:41:02 +08:00
GuEe-GUI
cb808f3a0e
[dm][serial] replace rt_hw_atomic_add to rt_atomic_add, clean code
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-16 12:41:02 +08:00
GuEe-GUI
32bdc73a11
[dm][serial] make DM Kconfig import
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-16 12:41:02 +08:00
GuEe-GUI
e83a6e9baa
[dm][scsi] Add parallel_io option for SCSI host
...
Some SCSI supported parallel_io = RT_TRUE, like UFS.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-16 11:39:41 +08:00
GuEe-GUI
4913211409
[dm][core] add common machine power interface
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-16 11:35:35 +08:00
GuEe-GUI
27eb7c4f72
[dm][graphic] add new drivers and logo
...
1. Generic GPIO based backlight driver
2. Generic PWM based backlight driver
3. Simple framebuffer support
4. Standard 224-color RT-Thread logo
5. Standard 224-color RT-Thread white logo
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-15 16:54:23 +08:00
GuEe-GUI
5abecc1fd0
[dm][graphic] support dm mode
...
1. Add backlight framework for graphic.
2. Add framebuffer and plane, power, EDID for graphic framework
3. Add boot logo render for graphic
4. Update lcd.h
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-15 16:54:23 +08:00
GuEe-GUI
b61f8b410b
[finsh][cmd] add 'console' command to config console
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-15 12:51:30 +08:00
bernard
4f154d8207
[rust] Tidy core defaults and migrate docs to README
2025-12-15 12:50:49 +08:00
GuEe-GUI
cbf3f8c3b4
[dm][core] Update the OFW CLk init flow
...
The clock should init before common platform devices.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-13 16:35:32 +08:00
GUI
1b4111a99e
[dm][pinctrl] Set pinctrl default auto in platform bus. ( #11052 )
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-13 16:33:05 +08:00
GUI
d8709ba9fb
[dm][hwcache] support hwcache ( #11049 )
...
Some ARCH not has std cache ops, such as RISC-V
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-13 16:32:25 +08:00
GuEe-GUI
af0e513bef
[dm][pmdomain] make DM Kconfig import
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-13 16:30:04 +08:00
lct1001
170069b292
components:libc:cplusplus:os/utest:Some comments have been initially added.
...
Some comments have been initially added as a bignner task.
components/libc/cplusplus/os/cxx_Semaphore.cpp
components/libc/cplusplus/os/cxx_Thread.cpp
components/libc/cplusplus/utest/tc_atomic.cpp
components/libc/cplusplus/utest/tc_smartptr.cpp
components/libc/cplusplus/utest/tc_thread.cpp
Signed-off-by:Liu Chengtao<2739960959@qq.com >
2025-12-12 14:00:36 +08:00
GuEe-GUI
6270b2f97c
[dm][core] Set default CLK config for platform device probe
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-12 13:33:28 +08:00
GuEe-GUI
335a1242b0
[dm][clk] refactoring the CLK framework
...
The old CLK is can't link all hardware clock cell in system that the
API of layout such as 'set_parent' can't work as expected.
Some hareware clock cell need some flags to prevent some dangerous behaviors, eg:
When a clock cell is link to the PMU, the SoC will power-down if the cell is
disable.
The new CLK can do it, and make the CLK drivers implemented easier from
TRM/DataSheet.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-12 13:33:28 +08:00
Fan Yang
d6b173be4b
fix:[components][drivers][sdio] fix the sequence of switching to emmc high-speed ddr mode #11037
2025-12-11 19:25:29 +08:00
GuEe-GUI
dd20176cba
[dm][hwspinlock] support hwspinlock
...
Hardware spinlock modules provide hardware assistance for
synchronization and mutual exclusion between heterogeneous processors
and those not operating under a single, shared operating system.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-11 11:08:33 +08:00
Chuan
d76356b94e
[utest][smp_call]:Add standardized documentation for SMP Call Smoke Test ( #11014 )
2025-12-11 11:06:57 +08:00
GUI
f39a86266a
[drivers][ofw] Update OFW #11004
...
Fixup fdt address reg and cells parse.
Support only option name way for earlycon.
Find the console device when using "stdout-path".
2025-12-11 11:05:47 +08:00
Chuan
5f9984fa5e
[utest][smp_call]:fix initialize current_mask in _wait_for_update
2025-12-10 17:05:10 +08:00
GuEe-GUI
22a77f2694
[dm][nvmem] support nvmem
...
Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-10 17:04:23 +08:00
GUI
e465ec567d
[dm][rtc] update rtc and new drivers ( #11033 )
...
* [dd][rtc] set the RTC alarm thread stack size default.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
* [dm][rtc] make Kconfig import for DM
Signed-off-by: GuEe-GUI <2991707448@qq.com >
* [dm][rtc] support DM API for RTC
1. rtc_dev_set_name for RTC device init the name auto.
2. rtc_wkalarm_to_timestamp and rtc_timestamp_to_wkalarm for
rt_rtc_wkalarm/time_t convert.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
* [dm][rtc] add new drivers
1. Dallas/Maxim DS1302
2. Dallas/Maxim DS1307/37/38/39/40, ST M41T11
3. Goldfish Real Time Clock
4. Haoyu Microelectronics HYM8563
5. NXP PCF8523
6. Philips PCF8563/Epson RTC8564
7. ARM PL031
8. Epson RX8010SJ
Signed-off-by: GuEe-GUI <2991707448@qq.com >
---------
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-10 17:03:20 +08:00
GUI
3ff3fc3948
[dm][input] support input #11031
2025-12-10 16:58:10 +08:00
GuEe-GUI
357c9b7b5a
[dm][pin][pinctrl] add new driver
...
1. ARM PL061 GPIO
2. Single Pinctrl
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-10 16:53:09 +08:00
GuEe-GUI
b5ea9220be
[dm][pin] fixup the DM Kconfig import in DM mode only
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-10 16:53:09 +08:00
GuEe-GUI
6c0753cb8f
[dm][pinctrl] new interface for 'pin_gpio_request'
...
Some GPIO should apply GPIO mode by pinctrl, add `pin_ctrl_gpio_request`
for GPIO driver to apply it auto.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-10 16:53:09 +08:00
GuEe-GUI
44c1cf8d1e
[DM][HWTIMER] Enable arm arch timer more API for cpuidle in the future
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-09 21:07:14 +08:00
GuEe-GUI
0aca985525
[DM][HWTIMER] Make Kconfig import for DM
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-09 21:07:14 +08:00
GuEe-GUI
056ae364cb
[dm][core] add new API for DM
...
1. rt_dm_dev_is_big_endian
2. rt_dm_dev_get_prop_fuzzy_name
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-09 21:04:16 +08:00
GuEe-GUI
c857e03544
[dm][core] fixup the rt_dm_dev_prop_read_u8_array_index OFW check
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-09 21:04:16 +08:00
GuEe-GUI
7357abdc37
[dm][core] cleanup format
...
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-09 21:04:16 +08:00
GuEe-GUI
c74148a8b3
[dm][core] add common stack size for DM
...
DM driver is public, they don't know the size of the thread stack default.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-09 21:04:16 +08:00
GUI
944b974c1a
[DM][PIC] Fix #10998 ( #11024 )
...
* [DM/PIC] Fixup SMP CPU mask list when CPU < 4
* [DM][PIC] Fix #10998
The size of cpumask is `RT_CPUS_NR`, memset force to space will
overflow in stack.
Signed-off-by: GuEe-GUI <2991707448@qq.com >
2025-12-09 14:33:31 +08:00
GUI
b949618f20
[DM][LED] Update LED#11007
...
* [DM][LED] Fixup LED check status string match
* [DM][LED] Update LED blink cycle to heartbeat
* [DM][LED] Fixup gpio-led memory alloc to zero
* [DM][LED] Update LED common drivers
2025-12-09 13:58:43 +08:00