get_stab_string_offset currently creates the stabstr section if not
already present, in the process keeping a reference to the malloc'd
section name string. Really, the name belongs in bfd_alloc'd memory
or some obstack so that it doesn't show as a memory leak on exit.
s_stab_generic at least does allocate the name for the stab section on
an obstack, but doesn't tidy that as well as it could. Return paths
after issuing a warning don't release the memory, nor the memory for
the "string" copy.
This patch fixes these problems. s_stab_generic is rearranged so that
creation of the sections occurs earlier, before any potential uses of
the note obstack during expression parsing. That makes it possible to
always free the section name strings unless used to create new
sections. I've also avoided get_absolute_expression_and_terminator
as I see that function might skip over end-of-line, and lack of a
--input_line_pointer might have caused the following source line to be
ignored. (Other uses of this function in gas are OK.)
* config/obj-coff.c (obj_coff_init_stab_section): Add stabstr
param. Pass to get_stab_string_offset rather than name of
section.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
(elf_init_stab_section): Adjust.
* config/obj-coff.h (INIT_STAB_SECTION): Update.
(obj_coff_init_stab_section): Update prototype.
* config/obj-som.h: Similarly.
* config/obj-elf.h: Similarly.
* config/obj-multi.h (INIT_STAB_SECTION): Update.
* obj.h (struct format_ops <init_stab_section>): Update.
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (cached_sec): Delete.
(stabs_begin): Adjust to suit.
(get_stab_string_offset): Add stabstr param, delete stabstr_name
and free_stabstr_secname params. Don't make stabstr section
here.
(eat_comma): New function.
(s_stab_generic): Replace stab_secname_obstack_end param with
bool freenames. Move creation of stab and stabstr sections
earlier, so the names can be freed earlier before possible use
of notes obstack during expression parsing. Tidy error paths
ensuring "string" is freed. Use get_absolute_expression in
place of get_absolute_expression_and_terminator.
(s_stab): Adjust.
(s_xstab): Use notes_concat to make stabstr section name.
While --sectname-subst is nice, it isn't enough to e.g. mimic
-f{function,data}-sections in assembly code, when such use is to be
optional (e.g. dependent upon some configuration setting).
Assign meaning to '+' and '-' as section attribute letters, allowing
to inherit the prior section's attributes (and possibly type) along
with adding or removing some. Note that documenting the interaction
with '?' as undefined is a precautionary measure.
While touching the function invocation, stop using |= on the result of
obj_elf_parse_section_letters(): "attr" is firmly zero ahead of the
call.
It's not documented anyway, and having it makes no sense anymore with
obj_elf_section_word() now being TC_SPARC-only. In any event the x86
backing function was dead code.
Freeing ecoff_debug_info "pointers to the unswapped symbolic info"
isn't a simple matter, due to differing allocation strategies. In
_bfd_ecoff_slurp_symbolic_info the pointers are to objalloc memory.
In the ecoff linker they are to separately malloc'd memory. In gas we
have most (obj-elf) or all (obj-ecoff) into a single malloc'd buffer.
This patch fixes the leaks for binutils and ld, leaving the gas leaks
for another day. The mips elf backend already had this covered, and
the ecoff backend had a pointer, raw_syments used as a flag, so most
of the patch is moving these around a little so they are accessible
for both ecoff and elf.
include/
* coff/ecoff.h (struct ecoff_debug_info): Add alloc_syments.
bfd/
* libecoff.h (struct ecoff_tdata): Delete raw_syments.
* elfxx-mips.c (free_ecoff_debug): Delete. Replace uses with
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_mips_elf_final_link): Init debug.alloc_syments.
* ecofflink.c (_bfd_ecoff_free_ecoff_debug_info): New function.
* ecoff.c (_bfd_ecoff_bfd_free_cached_info): Call
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_ecoff_slurp_symbolic_info): Replace uses of raw_syments
with alloc_syments.
(ecoff_final_link_debug_accumulate): Likewise. Use
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_ecoff_bfd_copy_private_bfd_data): Set alloc_syments for
copied output.
* elf64-alpha.c (elf64_alpha_read_ecoff_info): Use
_bfd_ecoff_free_ecoff_debug_info.
* libbfd-in.h (_bfd_ecoff_free_ecoff_debug_info): Declare.
* libbfd.h: Regenerate.
gas/
* config/obj-ecoff.c (ecoff_frob_file): Set alloc_syments.
* config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
Well, it doesn't work on x86 or ppc, which both have # starting
comments anywhere on a line. I think it is therefore only useful on
sparc.
PR 11601
* config/obj-elf.c (obj_elf_section_word): Only compile for sparc.
(obj_elf_section): Only support solaris .section directive on
sparc.
* doc/as.texi (Section): Mention that solaris .section
directive is only supported for sparc.
Provide a way for config/obj-* to clean up at end of assembly, and do
so for ELF.
* obj.h (struct format_ops): Add "end".
* config/obj-aout.c (aout_format_ops): Init new field.
* config/obj-coff.c (coff_format_ops): Likewise.
* config/obj-ecoff.c (ecoff_format_ops): Likewise.
* config/obj-elf.c (elf_format_ops): Likewise.
(elf_begin): Move later in file. Clear some more variables.
(comment_section): Make file scope.
(free_section_idx): Rewrite.
(elf_adjust_symtab): Expand str_htab_create call and use
free_section_idx as delete function.
(elf_frob_file_after_relocs): Don't clean up groups.indexes here.
(elf_end): New function.
* config/obj-elf.h (obj_end): Define.
* config/obj-multi.h (obj_end): Define.
* output-file.c (output_file_close): Call obj_end.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
Using notes_calloc means all of the string hash table memory should
now be freed before gas exits, even though htab_delete isn't called.
This also means that the hash table free_f and del_f must be NULL,
because freeing notes obstack memory results in all more recently
allocated notes memory being freed too. So hash table resizing won't
free any memory, and will be a little faster. Also, htab_delete won't
do anything (and be quick about it).
Since htab_traverse can also resize hash tables (to make another
traversal faster if the table is largely empty), stop that happening
when only one traversal is done.
* as.h: Reorder hash.h after symbols.h for notes_calloc decl.
* hash.h (str_htab_create): Use notes_calloc. Do not free.
* symbols.c (resolve_local_symbol_values): Don't resize
during hash table traversal.
* config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
* config/tc-ia64.c (ia64_adjust_symtab, ia64_frob_file): Likewise.
* config/tc-nds32.c (nds32_elf_analysis_relax_hint): Likewise.
When handling section names in quotes obj_elf_section_name calls
demand_copy_C_string, which puts the name on the gas notes obstack.
Such strings aren't usually freed, since obstack_free frees all more
recently allocated objects as well as its arg. When handling
non-quoted names, obj_elf_section_name mallocs the name. Due to the
mix of allocation strategies it isn't possible for callers to free
names, if that was desirable. Partially fix this by always creating
names on the obstack, which is more efficient anyway. (You still
can't obstack_free on error paths due to the xtensa
tc_canonicalize_section_name.) Also remove a couple of cases where
the name is dup'd for no good reason as far as I know.
PR 29256
* config/obj-elf.c (obj_elf_section_name): Create name on notes
obstack.
(obj_elf_attach_to_group): Don't strdup group name.
(obj_elf_section): Likewise.
(obj_elf_vendor_attribute): Use xmemdup0 rather than xstrndup.
Make it a little more obvious that remap_debug_filename returns an
allocated string (that should be freed) by returning a char * rather
than const char *. Free a few missed cases in dwarf2dbg.c, and free
other memory allocated in dwarf2dbg.c. Also remove static
initialisation of variables and initialise in dwarf2_init instead,
in order to ensure gas state is saner for oss-fuzz.
* remap.c (remap_debug_filename): Remove const from return.
* as.h (remap_debug_filename): Update prototype.
* config/obj-elf.c (obj_elf_ident): Simplify free of
remap_debug_filename output.
* stabs.c (stabs_generate_asm_file): Likewise.
* dwarf2dbg.c (dirs, dirs_in_use, dirs_allocated, current): Don't
initialise statically..
(dwarf2_init): ..do so here, along with most other static vars.
(assign_file_to_slot): Don't set files_allocated until we
succeed in allocating memory.
(purge_generated_debug): Add bool param, free more stuff if true.
(dwarf2_directive_filename): Adjust purge_generated_debug call.
(process_entries): Don't free line_entry here..
(dwarf2_cleanup): ..do so here instead, new function.
(dwarf2_finish): Call dwarf2_cleanup. When chaining together
subseg line entries, unhook entries from old subseg list.
(dwarf2_directive_loc): Free remap_debug_filename string.
(out_dir_and_file_list): Likewise.
(out_debug_str): Likewise.
These were used originally to represent "# <line> <file>" constructs
inserted by (typically) compilers when pre-processing. Quite some time
ago they were replaced by .linefile though. Since the original
directives were never documented, we ought to be able to remove support
for them. As a result in a number of case function parameter aren't used
anymore and can hence be dropped.
For
```
.size foo1, 1
foo1:
.set bar1, foo1
.size bar1, 2
.size bar2, 2
.set bar2, foo1
.set bar3, foo2
.size bar3, 2
.size bar4, 2
.set bar4, foo2
.size foo2, 1
foo2:
```
bar1's size is 2 while bar2, bar3, bar4's is 1. The behavior of bar1 makes sense
(generally directives on the new symbol should win) and is relied upon by glibc
stdio-common/errlist.c:
```
.hidden _sys_errlist_internal
.globl _sys_errlist_internal
.type _sys_errlist_internal, @object
.size _sys_errlist_internal, 1072
_sys_errlist_internal:
.globl __GLIBC_2_1_sys_errlist
.set __GLIBC_2_1_sys_errlist, _sys_errlist_internal
.type __GLIBC_2_1_sys_errlist, %object
.size __GLIBC_2_1_sys_errlist, 125 * (64 / 8)
// glibc expects that .size __GLIBC_2_1_sys_errlist, 125 * (64 / 8) wins.
```
The behavior of bar2/bar3/bar4 seems brittle. To avoid the reordering of the two
code blocks which will result in the bar3 situation, glibc compiles errlist.c
with gcc -fno-toplevel-reorder (previously -fno-unit-at-a-time).
To fix the inconsistency and improve robustness, make bar2/bar3/bar4 match bar1,
removing the directive order sensitivity.
There is a pity that `.size dest, 0` is indistinguishable from the case where
dest is unset, but the compromise seems fine.
PR gas/29012
* config/obj-elf.c (elf_copy_symbol_attributes): don't copy if src's size
has been set.
* testsuite/gas/elf/elf.exp: New test.
* testsuite/gas/elf/size.d: New file.
* testsuite/gas/elf/size.s: Likewise.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
When a symbol removed by .symver is used in relocation and there is one
and only one versioned symbol, don't remove the symbol. Instead, mark
it to be removed and replace the removed symbol used in relocation with
the versioned symbol before generating relocation.
PR gas/28157
* symbols.c (symbol_flags): Add removed.
(symbol_entry_find): Updated.
(symbol_mark_removed): New function.
(symbol_removed_p): Likewise.
* symbols.h (symbol_mark_removed): New prototype.
(symbol_removed_p): Likewise.
* write.c (write_relocs): Call obj_fixup_removed_symbol on
removed fixp->fx_addsy and fixp->fx_subsy if defined.
(set_symtab): Don't add a symbol if symbol_removed_p returns true.
* config/obj-elf.c (elf_frob_symbol): Don't remove the symbol
if it is used on relocation. Instead, mark it as to be removed
and issue an error if the symbol has more than one versioned name.
(elf_fixup_removed_symbol): New function.
* config/obj-elf.h (elf_fixup_removed_symbol): New prototype.
(obj_fixup_removed_symbol): New.
* testsuite/gas/symver/symver11.d: Updated expected error
message.
* testsuite/gas/symver/symver16.d: New file.
* testsuite/gas/symver/symver16.s: Likewise.
Since SHF_GNU_RETAIN is allowed on all sections, strip SHF_GNU_RETAIN
when checking incorrect section attributes.
PR gas/27412
* config/obj-elf.c (obj_elf_change_section): Strip SHF_GNU_RETAIN
when checking incorrect section attributes.
* testsuite/gas/elf/elf.exp: Run section28 and section29.
* testsuite/gas/elf/section28.d: New file.
* testsuite/gas/elf/section28.s: Likewise.
* testsuite/gas/elf/section29.d: Likewise.
* testsuite/gas/elf/section29.s: Likewise.
For non-relocatable link with SHF_LINK_ORDER inputs, allow mixed indirect
and data inputs with ordered and unordered inputs:
1. Add pattern to bfd_section for the matching section name pattern in
linker script and update BFD_FAKE_SECTION.
2. Sort the consecutive bfd_indirect_link_order sections with the same
pattern to allow linker script to overdide input section order.
3. Place unordered sections before ordered sections.
4. Change the offsets of the indirect input sections only.
bfd/
PR ld/26256
* elflink.c (compare_link_order): Place unordered sections before
ordered sections.
(elf_fixup_link_order): Add a link info argument. Allow mixed
ordered and unordered input sections for non-relocatable link.
Sort the consecutive bfd_indirect_link_order sections with the
same pattern. Change the offsets of the bfd_indirect_link_order
sections only.
(bfd_elf_final_link): Pass info to elf_fixup_link_order.
* section.c (bfd_section): Add pattern.
(BFD_FAKE_SECTION): Initialize pattern to NULL.
* bfd-in2.h: Regenerated.
gas/
PR ld/26256
* config/obj-elf.c (obj_elf_change_section): Also filter out
SHF_LINK_ORDER.
ld/
PR ld/26256
* ldlang.c (gc_section_callback): Set pattern.
* testsuite/ld-elf/pr26256-1.s: New file.
* testsuite/ld-elf/pr26256-1.t: Likewise.
* testsuite/ld-elf/pr26256-1a.d: Likewise.
* testsuite/ld-elf/pr26256-1b.d: Likewise.
* testsuite/ld-elf/pr26256-2.s: Likewise.
* testsuite/ld-elf/pr26256-2.t: Likewise.
* testsuite/ld-elf/pr26256-2a.d: Likewise.
* testsuite/ld-elf/pr26256-2b-alt.d: Likewise.
* testsuite/ld-elf/pr26256-2b.d: Likewise.
* testsuite/ld-elf/pr26256-3.s: Likewise.
* testsuite/ld-elf/pr26256-3a.d: Likewise.
* testsuite/ld-elf/pr26256-3a.t: Likewise.
* testsuite/ld-elf/pr26256-3b.d: Likewise.
* testsuite/ld-elf/pr26256-3b.t: Likewise.
elfNN_bed was made writable as an expedient means of communicating
ld -z max-page-size and ld -z common-page-size values to BFD linker
code, and even for objcopy to communicate segment alignment between
copy_private_bfd_data, rewrite_elf_program_header and
assign_file_positions_for_load_sections. Some time later elfNN_bed
elf_osabi was written by gas. It turns out none of these
modifications to elfNN_bed was necessary, so make it const again.
include/
* bfdlink.h (struct bfd_link_info): Add maxpagesize and
commonpagesize.
bfd/
* elfxx-target.h (elfNN_bed): Constify.
* bfd.c (bfd_elf_set_pagesize): Delete.
(bfd_emul_set_maxpagesize, bfd_emul_set_commonpagesize): Delete.
* elf.c (get_program_header_size): Get commonpagesize from
link info.
(_bfd_elf_map_sections_to_segments): Get maxpagesize from link info.
(assign_file_positions_for_load_sections): Likewise.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Add maxpagesize param. Set map_p_align.
(copy_private_bfd_data): Don't call bfd_elf_set_maxpagesize.
Instead pass maxpagesize to rewrite_elf_program_header.
* elf32-nds32.c (relax_range_measurement): Add link_info param.
Get maxpagesize from link_info. Adjust caller.
* bfd-in2.h: Regenerate.
gas/
* config/obj-elf.c (obj_elf_section): Don't set elf_osabi here.
(obj_elf_type): Likewise.
ld/
* ld.h (ld_config_type): Delete maxpagesize and commonpagesize.
* emultempl/elf.em: Use link_info rather than config
for maxpagesize and commonpagesize.
* emultempl/ppc32elf.em: Likewise.
* ldexp.c (fold_binary, fold_name): Likewise.
* ldemul.c (after_parse_default): Likewise.
(set_output_arch_default): Don't call bfd_emul_set_maxpagesize
or bfd_emul_set_commonpagesize.
For
.globl foo2
.section .data.foo,"aR"
.align 4
.type foo2, @object
.size foo2, 4
foo2:
.long 2
.globl foo1
.section .data.foo
.align 4
.type foo1, @object
.size foo1, 4
foo1:
.long 1
generate a new section if the SHF_GNU_RETAIN bit doesn't match.
* config/obj-elf.c (SEC_ASSEMBLER_SHF_MASK): New.
(get_section_by_match): Also check if SEC_ASSEMBLER_SHF_MASK of
sh_flags matches. Rename info to sh_info.
(obj_elf_change_section): Don't check previous SHF_GNU_RETAIN.
Rename info to sh_info.
(obj_elf_section): Rename info to sh_info. Set sh_flags for
SHF_GNU_RETAIN.
* config/obj-elf.h (elf_section_match): Rename info to sh_info.
Add sh_flags.
* testsuite/gas/elf/elf.exp: Run section27.
* testsuite/gas/elf/section24b.d: Updated.
* testsuite/gas/elf/section27.d: New file.
* testsuite/gas/elf/section27.s: Likewise.
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI.
It is defined as follows:
=========================================================
Section Attribute Flags
+-------------------------------------+
| Name | Value |
+-------------------------------------+
| SHF_GNU_RETAIN | 0x200000 (1 << 21) |
+-------------------------------------+
SHF_GNU_RETAIN
The link editor should not garbage collect the section.
=========================================================
The .section directive accepts the "R" flag, which indicates
SHF_GNU_RETAIN should be applied to the section.
There is not a direct mapping of SHF_GNU_RETAIN to the BFD
section flag SEC_KEEP. Keeping these flags distinct allows
SHF_GNU_RETAIN sections to be explicitly removed by placing them in
/DISCARD/.
bfd/ChangeLog:
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain.
(struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain
for SHF_GNU_RETAIN.
(_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is
not supported by the OSABI.
Adjust error messages.
* elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from
input BFD to output BFD.
(bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set.
binutils/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN.
Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs.
* testsuite/binutils-all/readelf.exp: Run new tests.
Don't run run_dump_test when there isn't an assembler available.
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust
comment.
* testsuite/binutils-all/readelf-maskos-1a.d: New test.
* testsuite/binutils-all/readelf-maskos-1b.d: New test.
* testsuite/binutils-all/readelf-maskos.s: New test.
* testsuite/binutils-all/retain1.s: New test.
* testsuite/binutils-all/retain1a.d: New test.
* testsuite/binutils-all/retain1b.d: New test.
gas/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit
between section declarations.
(obj_elf_parse_section_letters): Handle 'R' flag.
Handle numeric flag values within the SHF_MASKOS range.
(obj_elf_section): Validate SHF_GNU_RETAIN usage.
* doc/as.texi: Document 'R' flag to .section directive.
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section22.d: New test.
* testsuite/gas/elf/section22.s: New test.
* testsuite/gas/elf/section23.s: New test.
* testsuite/gas/elf/section23a.d: New test.
* testsuite/gas/elf/section23b.d: New test.
* testsuite/gas/elf/section23b.err: New test.
* testsuite/gas/elf/section24.l: New test.
* testsuite/gas/elf/section24.s: New test.
* testsuite/gas/elf/section24a.d: New test.
* testsuite/gas/elf/section24b.d: New test.
include/ChangeLog:
* elf/common.h (SHF_GNU_RETAIN): Define.
ld/ChangeLog:
* NEWS: Announce support for SHF_GNU_RETAIN.
* ld.texi (garbage collection): Document SHF_GNU_RETAIN.
(Output Section Discarding): Likewise.
* testsuite/ld-elf/elf.exp: Run new tests.
* testsuite/ld-elf/retain1.s: New test.
* testsuite/ld-elf/retain1a.d: New test.
* testsuite/ld-elf/retain1b.d: New test.
* testsuite/ld-elf/retain2.d: New test.
* testsuite/ld-elf/retain2.ld: New test.
* testsuite/ld-elf/retain2.map: New test.
* testsuite/ld-elf/retain3.d: New test.
* testsuite/ld-elf/retain3.s: New test.
* testsuite/ld-elf/retain4.d: New test.
* testsuite/ld-elf/retain4.s: New test.
* testsuite/ld-elf/retain5.d: New test.
* testsuite/ld-elf/retain5.map: New test.
* testsuite/ld-elf/retain5lib.s: New test.
* testsuite/ld-elf/retain5main.s: New test.
* testsuite/ld-elf/retain6a.d: New test.
* testsuite/ld-elf/retain6b.d: New test.
* testsuite/ld-elf/retain6lib.s: New test.
* testsuite/ld-elf/retain6main.s: New test.
Symbol value is in bytes while fragS::fr_address is in octets. Fixes GAS
symver12 and symver13 tests on ELF targets with with OCTETS_PER_BYTE>1.
* config/obj-elf (elf_frob_symbol): Fix symbol value calculation
for versioned symbol aliases.
Signed-off-by: Christian Eggers <ceggers@gmx.de>
PR 26253
gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for
the "o" section flag. Interpret it as a section index. Allow an
index of zero.
* doc/as.texi: Document the new behaviour.
* NEWS: Mention the new feature. Tidy entries.
* testsuite/gas/elf/sh-link-zero.s: New test.
* testsuite/gas/elf/sh-link-zero.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/section21.l: Updated expected assembler
output.
bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an
sh_link value of zero when the SLF_LINK_ORDER flag is set.
(assign_section_numbers): Likewise.
* config/obj-elf (elf_pseudo_table): Add attach_to_group.
(obj_elf_attach_to_group): New function.
* doc/as.texi: Document the new directive.
* NEWS: Mention the new feature.
* testsuite/gas/elf/attach-1.s: New test.
* testsuite/gas/elf/attach-1.d: New test driver.
* testsuite/gas/elf/attach-2.s: New test.
* testsuite/gas/elf/attach-2.d: New test driver.
* testsuite/gas/elf/attach-err.s: New test.
* testsuite/gas/elf/attach-err.d: New test driver.
* testsuite/gas/elf/attach-err.err: New test error output.
* testsuite/gas/elf/elf.exp: Run the new tests.
This patch fixes an internal error in GAS when defining a section using
a symbol that has already been named but not defined. For a minimal
reproducer, try the following input:
a=b
.sect a
The problem is that obj_elf_change_section() happily reuses the symbol
"a" created by equals() without clearing the sy_value field: prior to
this patch, it just set bsym. This caused a problem when attempting to
resolve the section symbol, since resolve_symbol_value() ended up
resolving the symbol as if it were the original symbol created by
equals(), which ends up leaving the section symbol in the undefined
section instead of in section a, hence the call to abort() in
S_SET_SEGMENT().
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section): When repurposing an
existing symbol, ensure that we set sy_value as per other (fresh)
section symbols.
* testsuite/gas/elf/elf.exp: Add new test.
* testsuite/gas/elf/section-symbol-redef.d: New test.
* testsuite/gas/elf/section-symbol-redef.s: Input for test.
* config/obj-elf.c (elf_frob_symbol): Unconditionally remove
symbol for ".symver .. remove".
* doc/as.texi (.symver): Update.
* testsuite/gas/symver/symver11.s: Make foo weak.
* testsuite/gas/symver/symver11.d: Expect an error.
* testsuite/gas/symver/symver7.d: Allow other random symbols.
Extend .symver directive to update visibility of the original symbol and
assign one original symbol to different versioned symbols:
.symver foo, foo@VERS_1, local # Change foo to a local symbol.
.symver foo, foo@VERS_2, hidden # Change foo to a hidden symbol.
.symver foo, foo@@VERS_3, remove # Remove foo from symbol table.
.symver foo, bar@V1 # Assign foo to bar@V1 and baz@V2.
.symver foo, baz@V2
PR gas/23840
PR gas/25295
* NEWS: Mention .symver extension.
* config/obj-elf.c (obj_elf_find_and_add_versioned_name): New
function.
(obj_elf_symver): Call obj_elf_find_and_add_versioned_name to
add a version name. Add local, hidden and remove visibility
support.
(elf_frob_symbol): Handle the list of version names. Update the
original symbol to local, hidden or remove it from the symbol
table.
(elf_frob_file_before_adjust): Handle the list of version names.
* config/obj-elf.h (elf_visibility): New.
(elf_versioned_name_list): Likewise.
(elf_obj_sy): Change local to bitfield. Add rename, bad_version
and visibility. Change versioned_name pointer to struct
elf_versioned_name_list.
* doc/as.texi: Update .symver directive.
* testsuite/gas/symver/symver.exp: Run all *.d tests. Add more
error checking tests.
* testsuite/gas/symver/symver6.d: New file.
* testsuite/gas/symver/symver7.d: Likewise.
* testsuite/gas/symver/symver7.s: Likewise.
* testsuite/gas/symver/symver8.d: Likewise.
* testsuite/gas/symver/symver8.s: Likewise.
* testsuite/gas/symver/symver9.s: Likewise.
* testsuite/gas/symver/symver9a.d: Likewise.
* testsuite/gas/symver/symver9b.d: Likewise.
* testsuite/gas/symver/symver10.s: Likewise.
* testsuite/gas/symver/symver10a.d: Likewise.
* testsuite/gas/symver/symver10b.d: Likewise.
* testsuite/gas/symver/symver11.d: Likewise.
* testsuite/gas/symver/symver11.s: Likewise.
* testsuite/gas/symver/symver12.d: Likewise.
* testsuite/gas/symver/symver12.s: Likewise.
* testsuite/gas/symver/symver13.d: Likewise.
* testsuite/gas/symver/symver13.s: Likewise.
* testsuite/gas/symver/symver14.d: Likewise.
* testsuite/gas/symver/symver14.l: Likewise.
* testsuite/gas/symver/symver15.d: Likewise.
* testsuite/gas/symver/symver15.l: Likewise.
* testsuite/gas/symver/symver6.l: Removed.
* testsuite/gas/symver/symver6.s: Updated.
PR 25803
gas * config/obj-elf.c (obj_elf_type): Reject ifunc symbols on MIPS
targets.
* testsuite/gas/elf/elf.exp: Add MIPS targets to the list to skip
for the type-2 test.
* testsuite/gas/elf/type-noifunc.e: Update to allow for MIPS
targets running this test.
bfd * elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Replace an
abort with a more helpful error message.
* config/obj-elf.c (obj_elf_change_section): Error for section
type, attr or entsize changes in assembly.
* testsuite/gas/elf/elf.exp: Pass -Z to gas for section5 test.
* testsuite/gas/elf/section5.l: Update.
As shown in
https://sourceware.org/bugzilla/show_bug.cgi?id=25490
--gc-sections will silently remove __patchable_function_entries section
and generate corrupt result. This patch adds the section flag 'o' to
.section directive:
.section __patchable_function_entries,"awo",@progbits,foo
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat
.section __patchable_function_entries,"awo",@progbits,bar,unique,4
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1
which specifies the symbol name which the section references. Assmebler
will set its elf_linked_to_section to a local section where the symbol
is defined.
Linker is updated to call mark_hook if gc_mark of any of its linked-to
sections is set after all sections, except for backend specific ones,
have been garbage collected.
bfd/
PR gas/25381
* bfd-in2.h: Regenerated.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook
on section if gc_mark of any of its linked-to sections is set
and don't set gc_mark again.
* section.c (asection): Add linked_to_symbol_name to map_head
union.
gas/
PR gas/25381
* config/obj-elf.c (get_section): Also check
linked_to_symbol_name.
(obj_elf_change_section): Also set map_head.linked_to_symbol_name.
(obj_elf_parse_section_letters): Handle the 'o' flag.
(build_group_lists): Renamed to ...
(build_additional_section_info): This. Set elf_linked_to_section
from map_head.linked_to_symbol_name.
(elf_adjust_symtab): Updated.
* config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
* doc/as.texi: Document the 'o' flag.
* testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
* testsuite/gas/elf/section18.d: New file.
* testsuite/gas/elf/section18.s: Likewise.
* testsuite/gas/elf/section19.d: Likewise.
* testsuite/gas/elf/section19.s: Likewise.
* testsuite/gas/elf/section20.d: Likewise.
* testsuite/gas/elf/section20.s: Likewise.
* testsuite/gas/elf/section21.d: Likewise.
* testsuite/gas/elf/section21.l: Likewise.
* testsuite/gas/elf/section21.s: Likewise.
ld/
PR ld/24526
PR ld/25021
PR ld/25490
* testsuite/ld-elf/elf.exp: Run PR ld/25490 tests.
* testsuite/ld-elf/pr24526.d: New file.
* testsuite/ld-elf/pr24526.s: Likewise.
* testsuite/ld-elf/pr25021.d: Likewise.
* testsuite/ld-elf/pr25021.s: Likewise.
* testsuite/ld-elf/pr25490-2-16.rd: Likewise.
* testsuite/ld-elf/pr25490-2-32.rd: Likewise.
* testsuite/ld-elf/pr25490-2-64.rd: Likewise.
* testsuite/ld-elf/pr25490-2.s: Likewise.
* testsuite/ld-elf/pr25490-3-16.rd: Likewise.
* testsuite/ld-elf/pr25490-3-32.rd: Likewise.
* testsuite/ld-elf/pr25490-3-64.rd: Likewise.
* testsuite/ld-elf/pr25490-3.s: Likewise.
* testsuite/ld-elf/pr25490-4-16.rd: Likewise.
* testsuite/ld-elf/pr25490-4-32.rd: Likewise.
* testsuite/ld-elf/pr25490-4-64.rd: Likewise.
* testsuite/ld-elf/pr25490-4.s: Likewise.
* testsuite/ld-elf/pr25490-5-16.rd: Likewise.
* testsuite/ld-elf/pr25490-5-32.rd: Likewise.
* testsuite/ld-elf/pr25490-5-64.rd: Likewise.
* testsuite/ld-elf/pr25490-5.s: Likewise.
* testsuite/ld-elf/pr25490-6-16.rd: Likewise.
* testsuite/ld-elf/pr25490-6-32.rd: Likewise.
* testsuite/ld-elf/pr25490-6-64.rd: Likewise.
* testsuite/ld-elf/pr25490-6.s: Likewise.
