Make the clock driver parameters configurable. Use the maximum counter
frequency to get the best time resolution. Decouple the CPU counter from the
timecounter. Make the tick catch up handling more robust. Add a validation
test for the tick catch up.
Replace the BSP_CONSOLE_MINOR BSP option for the Xilinx Zynq BSPs with the new
BSP option ZYNQ_UART_KERNEL_IO_BASE_ADDR. Move the kernel I/O support to a
shared file.
This adds a test to very that remounting a completely used, but empty
NOR JFFS2 filesystem is possible. Previously, this triggered an edge
condition in the JFFS2 scan code that prevented remount of a correctly
formed and uncorrupted filesystem.
The RAM origin had an unnecessary alignment requirement and the RAM
lenght had a reference that couldn't possibly be used. This removes
those obsolete option specifiers.
When the switch to waf occurred, the SMP support in i386 was left out
causing it to accumulate a minor amount of cruft. This enables SMP for
the i386 BSPs that support it and updates them for the API drift that
has occurred since the change.
This enables the VME support for the MVME2500. Note that the PCIe
support from libbsd is used. So you need the related libbsd patches for
this to work.
If the drivers in libbsd are not enabled, the linker should not pick up
anything from this patch.
Remove obsolete tms570ls3137_hdk_with_loader BSP variant. With the new
memory origin/size build options this variant is no longer required.
Update #4982.
Hi all, this is my first email patch submission and my first contribution to RTEMS, so please give any
feedback you have!
This patch enables interrupt driven data reception on USART ports on
STM32F4 series chips. This feature is gated behind the config flag
BSP_CONSOLE_USE_INTERRUPTS. If this flag is not set to True, the older
polling implementation will be used. I tested this feature on STM32F401CE
(blackpill) and STM32 Nucleo F411RE boards, with both capable of keeping
up with a 115200 baud continous data stream. With the older polling
implementation, both would drop bytes at 9600 baud. In addition, I
updated the implementation of usart_set_attributes to support changing
the baud rate of the USART port based on the input speed.
