* Makefile.am, preinstall.am: New files, split of printk.
* console/console.c, console/debugputs.c: Split printk support out.
* include/spacewire.h: Removed.
* Makefile.am, preinstall.am: Use the following new drivers from
sparc/shared: PCI, b1553BRM, SpaceWire(GRSPW), CAN (GRCAN), Raw UART.
* shared/bspstart.c: LEON2 and LEON3 Data cache snooping detection on
startup, for drivers. (LEON2,3 are configurable processors, they can
be with or without DCache snooping. Caches without snooping needs the
drivers to flush cache or use the sparc instruction lda to force
cache miss...)
* include/bsp.h, startup/bspstart.c: LEON2 and LEON3 Data cache
snooping detection on startup, for drivers. (LEON2,3 are configurable
processors, they can be with or without DCache snooping. Caches
without snooping needs the drivers to flush cache or use the sparc
instruction lda to force cache miss...)
* include/bsp.h: LEON2 and LEON3 Data cache snooping detection on
startup, for drivers. (LEON2,3 are configurable processors, they can
be with or without DCache snooping. Caches without snooping needs the
drivers to flush cache or use the sparc instruction lda to force
cache miss...)
* Makefile.am: LEON3 AMBA PnP bus scanning moved to shared/amba/amba.c
and shared/include/ambapp.h. The AMBA scanning was improved to take
account for PnP info address translation. This is useful when
scanning remote AMBA busses for example when a board connected with
PCI has an AMBA bus that needs to be scanned, before the addresses
was hard coded. Also, LEON2 now have AMBA PnP bus scanning support.
By using the new AMBA scanning routines it is possible to isolate the
AMBA scanning code to ambapp.c, however existing drivers should be
updated to use them in order to save space.
* Makefile.am, preinstall.am, amba/amba.c, include/amba.h,
include/leon.h: LEON3 AMBA PnP bus scanning moved to
shared/amba/amba.c and shared/include/ambapp.h. The AMBA scanning was
improved to take account for PnP info address translation. This is
useful when scanning remote AMBA busses for example when a board
connected with PCI has an AMBA bus that needs to be scanned, before
the addresses was hard coded. Also, LEON2 now have AMBA PnP bus
scanning support. By using the new AMBA scanning routines it is
possible to isolate the AMBA scanning code to ambapp.c, however
existing drivers should be updated to use them in order to save
space.
* Makefile.am, preinstall.am: LEON3 AMBA PnP bus scanning moved to
shared/amba/amba.c and shared/include/ambapp.h. The AMBA scanning was
improved to take account for PnP info address translation. This is
useful when scanning remote AMBA busses for example when a board
connected with PCI has an AMBA bus that needs to be scanned, before
the addresses was hard coded. Also, LEON2 now have AMBA PnP bus
scanning support. By using the new AMBA scanning routines it is
possible to isolate the AMBA scanning code to ambapp.c, however
existing drivers should be updated to use them in order to save
space.
* console/debugputs.c, include/bsp.h, leon_smc91111/leon_smc91111.c,
startup/bspstart.c, startup/spurious.c: Remove debug print methods
that are redundant with prntk and replace their use with printk.
* console/debugputs.c, include/bsp.h, leon_smc91111/leon_smc91111.c,
startup/spurious.c: Remove debug print methods that are redundant
with prntk and replace their use with printk.
* clock/ckinit.c: Add support to the Clock driver template for
rtems_clock_set_nanoseconds_extension and the potential for TOD and
timestamps accurate to the nanosecond. On this BSP however, it is
only accurate to the microsecond.
PR 1233/bsps
* Makefile.am, console/console.c, console/debugputs.c: Move printk
support code into debug IO file so you do not get the entire console
driver when you do not want it.
