compilable release of virtex/gen83xx/gen5200 powerpc adaptations. Merged many different versions of new exception handling code to shared sources.

2007-07-10 16:00:28 +00:00
parent 2c0f748a4e
commit f610e83f53
57 changed files with 9401 additions and 324 deletions
--- a/7
+++ b/7
@@ -1,6 +1,11 @@
+2007-07-09	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
+
+	* aclocal/bsp-alias.m4, aclocal/check-bsps.m4, README.configure:
+	Add gen83xx and mpc8349eamds BSP 
+
 2007-07-02	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

-	* :README.configure: Add virtex BSP
+	* README.configure: Add virtex BSP

 2007-06-20	Joel Sherrill <joel.sherrill@oarcorp.com>

--- a/README.configure
+++ b/README.configure
@@ -203,7 +203,7 @@ powerpc		: psim score603e mcp750 mvme2100 mvme2307 mpc8260ads ss555
                  mvme5500 ep1a pm520_cr825 pm520_ze30 gen405 helas403
                  mbx821_001 mbx821_002 mbx821_002b mbx860_001b
                  mbx860_002 mbx860_005b mtx603e brs5l gen5200 ep5200
-		  virtex
+		  virtex gen83xx mpc8349eamds

                  NOTE: The "motorola_powerpc" BSP is a single BSP which
                  can be conditionally compiled to support most Motorola
--- a/aclocal/bsp-alias.m4
+++ b/aclocal/bsp-alias.m4
@@ -26,6 +26,7 @@ AC_DEFUN([_RTEMS_BSP_ALIAS],
    brs5l*)       $2=gen5200          ;; # MPC5200 based board
    pm520*)       $2=gen5200          ;; # MPC5200 based board
    ep5200*)      $2=gen5200          ;; # MPC5200 based board
+    mpc8349eamds) $2=gen83xx          ;; # MPC8349 based board
    simcpu32)     $2=sim68000         ;; # BSVC CPU32 variant
    simsh7032)    $2=shsim            ;; # SH7032 simulator
    simsh7045)    $2=shsim            ;; # SH7045 simulator
--- a/aclocal/check-bsps.m4
+++ b/aclocal/check-bsps.m4
@@ -26,6 +26,7 @@ AC_MSG_CHECKING([for available BSPs])
                             bsps="$bsps mbx860_005b"
                             ;;
          gen5200)           bsps="pm520_cr825 pm520_ze30 brs5l";;
+          gen83xx)           bsps="mpc8349eamds";;
 	  motorola_powerpc)  bsps="mvme2307 mcp750 mtx603e mvme2100";;
 	  pc386)             bsps="pc386 pc386dx pc486 pc586 pc686 pck6";;
          erc32)             bsps="erc32 sis";;
--- a/c/src/ChangeLog
+++ b/c/src/ChangeLog
@@ -1,3 +1,6 @@
+2007-07-09	Thomas Doerfler (Thomas.Doerfler@embedded-brains.de>:
+	* libchip/ide/ata.c: fixed warning
+
 2007-06-20	Ray Xu <rayx@gmail.com>

 	* optman/Makefile.am, optman/preinstall.am: Add stubs for file system,
--- a/c/src/lib/libbsp/powerpc/ChangeLog
+++ b/c/src/lib/libbsp/powerpc/ChangeLog
@@ -1,3 +1,8 @@
+2007-07-09	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
+
+	* acinclude.m4, gen83xx/:
+	added support for MPC83xx controllers and MPC8349EAMDS board
+	
 2007-07-02	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

 	* acinclude.m4, shared/irq/irq_asm.S, shared/irq/irq.c,
@@ -8,7 +13,7 @@

 2007-07-02	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

-	* vitex/:
+	* virtex/:
 	integrated "virtex" BSP to support PPC core implemented in a
 	Xilinx virtex FPGA

--- a/c/src/lib/libbsp/powerpc/acinclude.m4
+++ b/c/src/lib/libbsp/powerpc/acinclude.m4
@@ -8,6 +8,8 @@ AC_DEFUN([RTEMS_CHECK_BSPDIR],
    AC_CONFIG_SUBDIRS([gen405]);;
  gen5200 )
    AC_CONFIG_SUBDIRS([gen5200]);;
+  gen83xx )
+    AC_CONFIG_SUBDIRS([gen83xx]);;
  helas403 )
    AC_CONFIG_SUBDIRS([helas403]);;
  mbx8xx )
--- a/c/src/lib/libbsp/powerpc/gen83xx/Makefile.am
+++ b/c/src/lib/libbsp/powerpc/gen83xx/Makefile.am
@@ -0,0 +1,108 @@
+##
+## $Id$
+##
+
+ACLOCAL_AMFLAGS = -I ../../../../aclocal
+
+include $(top_srcdir)/../../../../automake/compile.am
+include $(top_srcdir)/../../bsp.am
+
+dist_project_lib_DATA = bsp_specs
+
+include_HEADERS = include/bsp.h 
+include_HEADERS += include/tm27.h
+
+nodist_include_HEADERS = include/bspopts.h
+DISTCLEANFILES = include/bspopts.h
+
+noinst_PROGRAMS =
+
+include_bspdir = $(includedir)/bsp
+
+include_HEADERS += include/coverhd.h
+
+nodist_include_HEADERS += ../../shared/tod.h
+
+EXTRA_DIST = start/start.S
+start.$(OBJEXT): start/start.S
+	$(CPPASCOMPILE) -o $@ -c $<
+project_lib_DATA = start.$(OBJEXT)
+
+EXTRA_DIST += ../../powerpc/shared/start/rtems_crti.S
+rtems_crti.$(OBJEXT): ../../powerpc/shared/start/rtems_crti.S
+	$(CPPASCOMPILE) -o $@ -c $<
+project_lib_DATA += rtems_crti.$(OBJEXT)
+
+dist_project_lib_DATA += startup/linkcmds.mpc8349eamds
+
+noinst_PROGRAMS += mpc83xx_regs.rel
+mpc83xx_regs_rel_SOURCES = startup/mpc83xx_regs.c
+mpc83xx_regs_rel_CPPFLAGS = $(AM_CPPFLAGS)
+mpc83xx_regs_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += startup.rel
+startup_rel_SOURCES = ../../shared/bspclean.c ../../shared/bsplibc.c \
+    ../../shared/bsppost.c startup/bspstart.c ../../shared/bootcard.c \
+    ../../shared/sbrk.c \
+    ../../shared/gnatinstallhandler.c startup/cpuinit.c
+
+startup_rel_CPPFLAGS = $(AM_CPPFLAGS)
+startup_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += pclock.rel
+pclock_rel_SOURCES = ../../powerpc/shared/clock/p_clock.c
+pclock_rel_CPPFLAGS = $(AM_CPPFLAGS)
+pclock_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+include_bsp_HEADERS = ./irq/irq.h\
+ ../../powerpc/shared/vectors/vectors.h
+
+noinst_PROGRAMS += vectors.rel
+vectors_rel_SOURCES = ../../powerpc/shared/vectors/vectors.h \
+    ../../powerpc/shared/vectors/vectors_init.c \
+    ../../powerpc/shared/vectors/vectors.S
+vectors_rel_CPPFLAGS = $(AM_CPPFLAGS)
+vectors_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += irq.rel
+irq_rel_SOURCES = ./irq/irq.h \
+	./irq/irq_init.c      \
+	./irq/ipic.c          \
+	../shared/irq/irq_asm.S
+
+irq_rel_CPPFLAGS = $(AM_CPPFLAGS)
+irq_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += console.rel
+console_rel_SOURCES = console/console.c console/ns16550cfg.c
+console_rel_CPPFLAGS = $(AM_CPPFLAGS)
+console_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += network.rel
+network_rel_SOURCES   = network/network.c 
+network_rel_CPPFLAGS  = $(AM_CPPFLAGS)
+network_rel_CPPFLAGS += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__  -D__BSD_VISIBLE
+
+network_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_LIBRARIES = libbsp.a
+libbsp_a_SOURCES =
+libbsp_a_LIBADD = startup.rel pclock.rel console.rel \
+                  vectors.rel irq.rel mpc83xx_regs.rel
+libbsp_a_LIBADD += network.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/shared/cpuIdent.rel \
+    ../../../libcpu/@RTEMS_CPU@/shared/cache.rel \
+    ../../../libcpu/@RTEMS_CPU@/@exceptions@/rtems-cpu.rel \
+    ../../../libcpu/@RTEMS_CPU@/@exceptions@/raw_exception.rel \
+    ../../../libcpu/@RTEMS_CPU@/mpc6xx/mmu.rel   \
+    ../../../libcpu/@RTEMS_CPU@/mpc6xx/timer.rel \
+    ../../../libcpu/@RTEMS_CPU@/mpc6xx/clock.rel \
+    ../../../libcpu/@RTEMS_CPU@/mpc6xx/mmu.rel   \
+    ../../../libcpu/@RTEMS_CPU@/mpc6xx/timer.rel \
+    ../../../libcpu/@RTEMS_CPU@/mpc83xx/tsec.rel
+
+EXTRA_DIST += README.mpc8349eamds
+EXTRA_DIST += times.mpc8349eamds
+
+include $(srcdir)/preinstall.am
+include $(top_srcdir)/../../../../automake/local.am
--- a/c/src/lib/libbsp/powerpc/gen83xx/Makefile.in
+++ b/c/src/lib/libbsp/powerpc/gen83xx/Makefile.in
--- a/c/src/lib/libbsp/powerpc/gen83xx/aclocal.m4
+++ b/c/src/lib/libbsp/powerpc/gen83xx/aclocal.m4
@@ -0,0 +1,935 @@
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf.  If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
+# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.10], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+
+# Figure out how to run the assembler.                      -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_PROG_AS
+# ----------
+AC_DEFUN([AM_PROG_AS],
+[# By default we simply use the C compiler to build assembly code.
+AC_REQUIRE([AC_PROG_CC])
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+AC_ARG_VAR([CCAS],      [assembler compiler command (defaults to CC)])
+AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
+_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
+])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+    dirpart=`AS_DIRNAME("$mf")`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`AS_DIRNAME(["$file"])`
+    AS_MKDIR_P([$dirpart/$fdir])
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.60])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_CC],
+                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_CXX],
+                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+                  [_AM_DEPENDENCIES(OBJC)],
+                  [define([AC_PROG_OBJC],
+                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $1 | $1:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode  enable make rules and dependencies not useful
+			  (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST(MAINT)dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../../../aclocal/bsp-configure.m4])
+m4_include([../../../../aclocal/bspopts.m4])
+m4_include([../../../../aclocal/canonical-target-name.m4])
+m4_include([../../../../aclocal/canonicalize-tools.m4])
+m4_include([../../../../aclocal/check-custom-bsp.m4])
+m4_include([../../../../aclocal/check-multiprocessing.m4])
+m4_include([../../../../aclocal/check-networking.m4])
+m4_include([../../../../aclocal/check-tool.m4])
+m4_include([../../../../aclocal/enable-multiprocessing.m4])
+m4_include([../../../../aclocal/enable-networking.m4])
+m4_include([../../../../aclocal/env-rtemsbsp.m4])
+m4_include([../../../../aclocal/gcc-isystem.m4])
+m4_include([../../../../aclocal/gcc-pipe.m4])
+m4_include([../../../../aclocal/gcc-specs.m4])
+m4_include([../../../../aclocal/multilib.m4])
+m4_include([../../../../aclocal/ppc.m4])
+m4_include([../../../../aclocal/prog-cc.m4])
+m4_include([../../../../aclocal/prog-ccas.m4])
+m4_include([../../../../aclocal/project-root.m4])
+m4_include([../../../../aclocal/rtems-ampolish.m4])
+m4_include([../../../../aclocal/rtems-top.m4])
+m4_include([../../../../aclocal/version.m4])
--- a/c/src/lib/libbsp/powerpc/gen83xx/bsp_specs
+++ b/c/src/lib/libbsp/powerpc/gen83xx/bsp_specs
@@ -0,0 +1,15 @@
+%rename endfile old_endfile
+%rename startfile old_startfile
+%rename link old_link
+
+*startfile:
+%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems:  ecrti%O%s rtems_crti%O%s  crtbegin.o%s  \
+%{!qrtems_debug: start.o%s} \
+%{qrtems_debug: start_g.o%s}}}
+
+*endfile:
+%{!qrtems: %(old_endfile)} %{qrtems: crtend.o%s ecrtn.o%s}
+
+*link:
+%{!qrtems: %(old_link)} %{qrtems: -dc -dp -u __vectors -N -u start -e start}
+
--- a/c/src/lib/libbsp/powerpc/gen83xx/configure.ac
+++ b/c/src/lib/libbsp/powerpc/gen83xx/configure.ac
@@ -0,0 +1,36 @@
+## Process this file with autoconf to produce a configure script.
+## 
+## $Id$
+
+AC_PREREQ(2.60)
+AC_INIT([rtems-c-src-lib-libbsp-powerpc-gen5200],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
+AC_CONFIG_SRCDIR([bsp_specs])
+RTEMS_TOP(../../../../../..)
+
+RTEMS_CANONICAL_TARGET_CPU
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+RTEMS_BSP_CONFIGURE
+
+RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
+RTEMS_CANONICALIZE_TOOLS
+RTEMS_PROG_CCAS
+
+RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[*],[1])
+RTEMS_BSPOPTS_HELP([DATA_CACHE_ENABLE],
+[If defined, the data cache will be enabled after address translation
+ is turned on.])
+
+RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[1])
+RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
+[If defined, the instruction cache will be enabled after address translation
+ is turned on.])
+
+RTEMS_CHECK_NETWORKING
+AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
+
+# Explicitly list all Makefiles here 
+AC_CONFIG_FILES([Makefile])
+
+RTEMS_PPC_EXCEPTIONS
+
+AC_OUTPUT
--- a/c/src/lib/libbsp/powerpc/gen83xx/console/config.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/console/config.c
@@ -0,0 +1,131 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+| This file has been adapted from the ep1a BSP to MPC83xx by      |
+|    Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>         |
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+|                                                                 |
+| See the other copyright notice below for the original parts.    |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the console driver configuration tables      |
+\*===============================================================*/
+/* derived from: */
+/*
+ *  This file contains the TTY driver table for the EP1A
+ * 
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+
+#include <libchip/serial.h>
+#include "ns16550cfg.h"
+#include <bsp.h>
+#include <libcpu/io.h>
+#include <mpc83xx/mpc83xx.h>
+
+/*
+ *  Based on BSP configuration information decide whether to do polling IO
+ *  or interrupt driven IO.
+ */
+
+#define NS16550_FUNCTIONS &ns16550_fns_polled
+
+/*
+ * The following table configures the console drivers used in this BSP.
+ *
+ * The first entry which, when probed, is available, will be named /dev/console,
+ * all others being given the name indicated.
+ *
+ * Each field is interpreted thus:
+ *
+ * sDeviceName	This is the name of the device.
+ * pDeviceFns	This is a pointer to the set of driver routines to use.
+ * pDeviceFlow	This is a pointer to the set of flow control routines to
+ *		use. Serial device drivers will typically supply RTSCTS
+ *		and DTRCTS handshake routines for DCE to DCE communication,
+ *		however for DCE to DTE communication, no such routines
+ *		should be necessary as RTS will be driven automatically
+ *		when the transmitter is active.
+ * ulMargin	The high water mark in the input buffer is set to the buffer
+ *		size less ulMargin. Once this level is reached, the driver's
+ *		flow control routine used to stop the remote transmitter will
+ *		be called. This figure should be greater than or equal to
+ *		the number of stages of FIFO between the transmitter and
+ *		receiver.
+ * ulHysteresis	After the high water mark specified by ulMargin has been
+ *		reached, the driver's routine to re-start the remote
+ *		transmitter will be called once the level in the input
+ *		buffer has fallen by ulHysteresis bytes.
+ * pDeviceParams This contains either device specific data or a pointer to a
+ *		device specific structure containing additional information
+ *		not provided in this table.
+ * ulCtrlPort1	This is the primary control port number for the device. This
+ *		may be used to specify different instances of the same device
+ *		type.
+ * ulCtrlPort2	This is the secondary control port number, of use when a given
+ *		device has more than one available channel.
+ * ulDataPort	This is the port number for the data port of the device
+ * ulIntVector	This encodes the interrupt vector of the device.
+ *
+ */
+console_tbl	Console_Port_Tbl[] = {
+        /*
+         *  NS16550 Chips provide first ttyS0/1 Ports.
+         */
+	{
+		"/dev/ttyS0",			/* sDeviceName */
+		SERIAL_NS16550,			/* deviceType */
+		NS16550_FUNCTIONS,		/* pDeviceFns */
+		NULL,				/* deviceProbe */
+		&ns16550_flow_RTSCTS,		/* pDeviceFlow */
+		16,				/* ulMargin */
+		8,				/* ulHysteresis */
+		(void *)9600,	/* baud rate */	/* pDeviceParams */
+                (uint32_t)&(mpc83xx.duart[0]),  /* ulCtrlPort1e */
+		0,				/* ulCtrlPort2 */
+                (uint32_t)&(mpc83xx.duart[0]),  /* ulDataPort */
+		Read_ns16550_register,		/* getRegister */
+		Write_ns16550_register,		/* setRegister */
+		NULL,				/* getData */
+		NULL,				/* setData */
+		BSP_CSB_CLK_FRQ,		/* ulClock */
+                0				/* ulIntVector */
+	},
+        {
+                "/dev/ttyS1",                   /* sDeviceName */
+                SERIAL_NS16550,                 /* deviceType */
+                NS16550_FUNCTIONS,              /* pDeviceFns */
+                NULL,                           /* deviceProbe */
+                &ns16550_flow_RTSCTS,           /* pDeviceFlow */
+                16,                             /* ulMargin */
+                8,                              /* ulHysteresis */
+                (void *)9600,   /* baud rate */ /* pDeviceParams */
+                (uint32_t)&(mpc83xx.duart[1]),  /* ulCtrlPort1-Filled in at runtime */
+                0,                              /* ulCtrlPort2 */
+                (uint32_t)&(mpc83xx.duart[1]),  /* ulDataPort-Filled in at runtime*/
+                Read_ns16550_register,          /* getRegister */
+                Write_ns16550_register,         /* setRegister */
+                NULL,                           /* getData */
+                NULL,                           /* setData */
+                BSP_CSB_CLK_FRQ,                /* ulClock */
+                0                               /* ulIntVector */
+        }
+};
+
--- a/c/src/lib/libbsp/powerpc/gen83xx/console/console.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/console/console.c
@@ -0,0 +1,340 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+| This file has been adapted from the ep1a BSP to MPC83xx by      |
+|    Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>         |
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+|                                                                 |
+| See the other copyright notice below for the original parts.    |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the console driver                           |
+\*===============================================================*/
+/* derived from: */
+/*
+ *  This file contains the TTY driver for the ep1a
+ *
+ *  This driver uses the termios pseudo driver.
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+
+#include <bsp.h>
+#include <rtems/libio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <termios.h>
+
+#include "console.h"
+#include <rtems/bspIo.h>
+
+/*
+ * Load configuration table
+ */
+#include "config.c"
+
+#define NUM_CONSOLE_PORTS (sizeof(Console_Port_Tbl)/sizeof(console_tbl))
+
+console_data	Console_Port_Data[NUM_CONSOLE_PORTS];
+unsigned long	Console_Port_Count;
+rtems_device_minor_number  Console_Port_Minor;
+rtems_boolean Console_Is_Initialized = FALSE;		
+/* PAGE
+ *
+ *  console_open
+ *
+ *  open a port as a termios console.
+ *
+ */
+rtems_device_driver console_open(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+	rtems_status_code status;
+	rtems_libio_open_close_args_t *args = arg;
+	rtems_termios_callbacks Callbacks;
+	console_fns *c;
+
+	/*
+	 * Verify the port number is valid.
+	 */
+	if(minor>Console_Port_Count)
+	{
+		return RTEMS_INVALID_NUMBER;
+	}
+
+	/*
+	 *  open the port as a termios console driver.
+	 */
+	c = Console_Port_Tbl[minor].pDeviceFns;
+	Callbacks.firstOpen     = c->deviceFirstOpen;
+	Callbacks.lastClose     = c->deviceLastClose;
+	Callbacks.pollRead      = c->deviceRead;
+	Callbacks.write         = c->deviceWrite;
+	Callbacks.setAttributes = c->deviceSetAttributes;
+	Callbacks.stopRemoteTx  = 
+		Console_Port_Tbl[minor].pDeviceFlow->deviceStopRemoteTx;
+	Callbacks.startRemoteTx = 
+		Console_Port_Tbl[minor].pDeviceFlow->deviceStartRemoteTx;
+	Callbacks.outputUsesInterrupts = c->deviceOutputUsesInterrupts;
+	status = rtems_termios_open ( major, minor, arg, &Callbacks);
+	Console_Port_Data[minor].termios_data = args->iop->data1;
+
+	return status;
+}
+ 
+rtems_device_driver console_close(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+	rtems_libio_open_close_args_t *args = arg;
+
+	if((args->iop->flags&LIBIO_FLAGS_READ) &&
+	   Console_Port_Tbl[minor].pDeviceFlow &&
+	   Console_Port_Tbl[minor].pDeviceFlow->deviceStopRemoteTx)
+	{
+		Console_Port_Tbl[minor].pDeviceFlow->deviceStopRemoteTx(minor);
+	}
+
+	return rtems_termios_close (arg);
+}
+ 
+rtems_device_driver console_read(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+  return rtems_termios_read (arg);
+}
+ 
+rtems_device_driver console_write(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+  return rtems_termios_write (arg);
+}
+ 
+rtems_device_driver console_control(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+  return rtems_termios_ioctl (arg);
+}
+
+/* PAGE
+ *
+ *  console_initialize
+ *
+ *  Routine called to initialize the console device driver.
+ */
+rtems_device_driver console_initialize(
+  rtems_device_major_number  major,
+  rtems_device_minor_number  minor,
+  void                      *arg
+)
+{
+  rtems_status_code          status;
+
+  /*
+   * initialize the termio interface.
+   */
+  rtems_termios_initialize();
+
+  Console_Port_Count=NUM_CONSOLE_PORTS;
+
+  for(minor=0;
+    minor<Console_Port_Count;
+    minor++)
+  {
+    /*
+     * First perform the configuration dependant probe, then the
+     * device dependant probe
+     */
+    if((!Console_Port_Tbl[minor].deviceProbe ||
+         Console_Port_Tbl[minor].deviceProbe(minor)) &&
+         Console_Port_Tbl[minor].pDeviceFns->deviceProbe(minor))
+    {
+      /*
+       * Use this device for the console
+       */
+      break;
+    }
+  }
+  if(minor==Console_Port_Count)
+  {
+    /*
+     * Failed to find a working device
+     */
+    rtems_fatal_error_occurred(RTEMS_IO_ERROR);
+  }
+	
+  Console_Port_Minor=minor;
+
+  /*
+   *  Register Device Names
+   */
+
+  status = rtems_io_register_name("/dev/console",
+           major,
+           Console_Port_Minor );
+  if (status != RTEMS_SUCCESSFUL)
+  {
+    rtems_fatal_error_occurred(status);
+  }
+  if ( Console_Port_Tbl[Console_Port_Minor].pDeviceFns->deviceInitialize ) {
+    Console_Port_Tbl[Console_Port_Minor]
+      .pDeviceFns->deviceInitialize(Console_Port_Minor);
+    Console_Is_Initialized = TRUE;
+  }
+
+  for(minor++;minor<Console_Port_Count;minor++)
+  {
+    /*
+     * First perform the configuration dependant probe, then the
+     * device dependant probe
+     */
+    if((!Console_Port_Tbl[minor].deviceProbe ||
+         Console_Port_Tbl[minor].deviceProbe(minor)) &&
+         Console_Port_Tbl[minor].pDeviceFns->deviceProbe(minor))
+    {
+      status = rtems_io_register_name(
+        Console_Port_Tbl[minor].sDeviceName,
+        major,
+        minor );
+      if (status != RTEMS_SUCCESSFUL)
+      {
+        rtems_fatal_error_occurred(status);
+      }
+
+      /*
+       * Initialize the hardware device.
+       */
+      if ( Console_Port_Tbl[minor].pDeviceFns->deviceInitialize )
+        Console_Port_Tbl[minor].pDeviceFns->deviceInitialize( minor);
+    }
+  }
+
+  return RTEMS_SUCCESSFUL;
+}
+
+/* PAGE
+ *
+ *  DEBUG_puts
+ *
+ *  This should be safe in the event of an error.  It attempts to ensure
+ *  that no TX empty interrupts occur while it is doing polled IO.  Then
+ *  it restores the state of that external interrupt.
+ *
+ *  Input parameters:
+ *    string  - pointer to debug output string
+ *
+ *  Output parameters:  NONE
+ *
+ *  Return values:      NONE
+ */
+
+void DEBUG_puts(
+	char *string
+)
+{
+	char *s;
+	uint32_t	Irql;
+
+	rtems_interrupt_disable(Irql);
+
+	for ( s = string ; *s ; s++ ) 
+	{
+		Console_Port_Tbl[Console_Port_Minor].pDeviceFns->
+			deviceWritePolled(Console_Port_Minor, *s);
+	}
+
+	rtems_interrupt_enable(Irql);
+}
+
+/* PAGE
+ *
+ *  DEBUG_puth
+ *
+ *  This should be safe in the event of an error.  It attempts to ensure
+ *  that no TX empty interrupts occur while it is doing polled IO.  Then
+ *  it restores the state of that external interrupt.
+ *
+ *  Input parameters:
+ *    ulHexNum - value to display
+ *
+ *  Output parameters:  NONE
+ *
+ *  Return values:      NONE
+ */
+void
+DEBUG_puth(
+    uint32_t ulHexNum
+    )
+{
+	unsigned long i,d;
+	uint32_t Irql;
+
+	rtems_interrupt_disable(Irql);
+	
+	Console_Port_Tbl[Console_Port_Minor].pDeviceFns->
+		deviceWritePolled(Console_Port_Minor, '0');
+	Console_Port_Tbl[Console_Port_Minor].pDeviceFns->
+		deviceWritePolled(Console_Port_Minor, 'x');
+
+	for(i=32;i;)
+	{
+		i-=4;
+		d=(ulHexNum>>i)&0xf;
+		Console_Port_Tbl[Console_Port_Minor].pDeviceFns->
+			deviceWritePolled(Console_Port_Minor,
+					  (d<=9) ? d+'0' : d+'a'-0xa);
+	}
+
+	rtems_interrupt_enable(Irql);
+}
+
+
+/* const char arg to be compatible with BSP_output_char decl. */
+void
+debug_putc_onlcr(const char c)
+{
+  uint32_t Irql;
+  if (Console_Is_Initialized) {
+    rtems_interrupt_disable(Irql);
+    
+    Console_Port_Tbl[Console_Port_Minor].pDeviceFns->
+      deviceWritePolled(Console_Port_Minor,c);
+    
+    rtems_interrupt_enable(Irql);
+  }
+}
+
+BSP_output_char_function_type   BSP_output_char = debug_putc_onlcr;
+/* const char arg to be compatible with BSP_output_char decl. */
+
--- a/c/src/lib/libbsp/powerpc/gen83xx/console/console.h
+++ b/c/src/lib/libbsp/powerpc/gen83xx/console/console.h
@@ -0,0 +1,38 @@
+/*
+ *  This file contains the TTY driver table definition for the PPCn_60x
+ *
+ *  This driver uses the termios pseudo driver.
+ *
+ *  COPYRIGHT (c) 1998 by Radstone Technology
+ *
+ *
+ * THIS FILE IS PROVIDED TO YOU, THE USER, "AS IS", WITHOUT WARRANTY OF ANY
+ * KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
+ * AS TO THE QUALITY AND PERFORMANCE OF ALL CODE IN THIS FILE IS WITH YOU.
+ *
+ * You are hereby granted permission to use, copy, modify, and distribute
+ * this file, provided that this notice, plus the above copyright notice
+ * and disclaimer, appears in all copies. Radstone Technology will provide
+ * no support for this code.
+ *
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+*/
+
+#include <rtems/ringbuf.h>
+#include <libchip/serial.h>
+#include <libchip/ns16550.h>
+
+extern console_tbl	Console_Port_Tbl[];
+extern console_data	Console_Port_Data[];
+extern unsigned long	Console_Port_Count;
+
+boolean Console_Port_Tbl_Init_ppc8245(int minor);
--- a/c/src/lib/libbsp/powerpc/gen83xx/console/ns16550cfg.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/console/ns16550cfg.c
@@ -0,0 +1,67 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+| This file has been adapted from the ep1a BSP to MPC83xx by      |
+|    Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>         |
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+|                                                                 |
+| See the other copyright notice below for the original parts.    |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the DUART access routines                    |
+\*===============================================================*/
+/* derived from: */
+/*
+ *  This include file contains all console driver definations for the nc16550
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+
+#include <rtems.h>
+#include <bsp.h>
+#include "console.h"
+                                                            
+typedef struct uart_reg
+{
+  volatile unsigned char reg;
+} uartReg;
+
+uint8_t Read_ns16550_register(
+  uint32_t  ulCtrlPort,
+  uint8_t   ucRegNum
+)
+{
+  struct uart_reg *p = (struct uart_reg *)ulCtrlPort;
+  uint8_t  ucData;
+  ucData = p[ucRegNum].reg;  
+  asm volatile("sync");
+  return ucData;
+}
+
+void  Write_ns16550_register(
+  uint32_t  ulCtrlPort,
+  uint8_t   ucRegNum,
+  uint8_t   ucData
+)
+{
+  struct uart_reg *p = (struct uart_reg *)ulCtrlPort;
+  p[ucRegNum].reg = ucData; 
+  asm volatile("sync");
+}
--- a/c/src/lib/libbsp/powerpc/gen83xx/console/ns16550cfg.h
+++ b/c/src/lib/libbsp/powerpc/gen83xx/console/ns16550cfg.h
@@ -0,0 +1,57 @@
+/*  nc16550cfg.h
+ *
+ *  This include file contains all console driver definations for the nc16550
+ *
+ *  COPYRIGHT (c) 1998 by Radstone Technology
+ *
+ *
+ * THIS FILE IS PROVIDED TO YOU, THE USER, "AS IS", WITHOUT WARRANTY OF ANY
+ * KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
+ * AS TO THE QUALITY AND PERFORMANCE OF ALL CODE IN THIS FILE IS WITH YOU.
+ *
+ * You are hereby granted permission to use, copy, modify, and distribute
+ * this file, provided that this notice, plus the above copyright notice
+ * and disclaimer, appears in all copies. Radstone Technology will provide
+ * no support for this code.
+ *
+ * COPYRIGHT (c) 1989-1999.
+ * On-Line Applications Research Corporation (OAR).
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license/LICENSE.
+ *
+ * $Id$
+ */
+
+#ifndef __NS16550_CONFIG_H
+#define __NS16550_CONFIG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ *  Board specific register access routines
+ */
+
+uint8_t Read_ns16550_register(
+  uint32_t  ulCtrlPort,
+  uint8_t   ucRegNum
+);
+
+void  Write_ns16550_register(
+  uint32_t  ulCtrlPort,
+  uint8_t   ucRegNum,
+  uint8_t   ucData
+);
+
+extern console_fns ns16550_fns_8245;
+extern console_fns ns16550_fns_polled_8245;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/c/src/lib/libbsp/powerpc/gen83xx/include/bsp.h
+++ b/c/src/lib/libbsp/powerpc/gen83xx/include/bsp.h
@@ -0,0 +1,220 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains board specific definitions                   |
+\*===============================================================*/
+
+#ifndef __GEN83xx_BSP_h
+#define __GEN83xx_BSP_h
+
+/*
+ * distinguish board characteristics
+ */
+/*
+ * for Freescale MPC8349 EAMDS
+ */
+#if defined(MPC8349EAMDS)
+/*
+ * two DUART channels supported
+ */
+#define GEN83xx_DUART_AVAIL_MASK 0x03
+
+/* we need the low level initialization in start.S*/
+#define NEED_LOW_LEVEL_INIT
+/*
+ * clocking infos
+ */
+#define BSP_CLKIN_FRQ 66000000L
+#define BSP_SYSPLL_MF 4 /* FIXME: derive from clock register */
+
+/*
+ * address range definitions
+ */
+/* ROM definitions (2 MB) */
+#define	ROM_START	0xFFE00000
+#define ROM_SIZE        0x00200000
+#define	ROM_END		(ROM_START+ROM_SIZE-1)
+#define	BOOT_START      ROM_START
+#define	BOOT_END        ROM_END
+
+/* SDRAM definitions (256 MB) */
+#define	RAM_START       0x00000000
+#define RAM_SIZE        0x10000000
+#define	RAM_END		(RAM_START+RAM_SIZE-1)
+
+/* working internal memory map base address */
+#define	IMMRBAR         0xE0000000
+
+/*
+ * working values for various registers, used in start/start.S
+ */
+/*
+ * Local Access Windows
+ * FIXME: decode bit settings 
+ */
+#define LBLAWBAR0_VAL  0xFE000000
+#define LBLAWAR0_VAL   0x80000016
+#define LBLAWBAR1_VAL  0xF8000000
+#define LBLAWAR1_VAL   0x8000000E
+#define LBLAWBAR2_VAL  0xF0000000
+#define LBLAWAR2_VAL   0x80000019
+#define DDRLAWBAR0_VAL 0x00000000
+#define DDRLAWAR0_VAL  0x8000001B
+/*
+ * Local Bus (Memory) Controller
+ * FIXME: decode bit settings 
+ */
+#define BR0_VAL 0xFE001001
+#define OR0_VAL 0xFF806FF7
+#define BR1_VAL 0xF8000801
+#define OR1_VAL 0xFFFFE8F0
+#define BR2_VAL 0xF0001861
+#define OR2_VAL 0xFC006901
+/*
+ * SDRAM registers
+ * FIXME: decode bit settings 
+ */
+#define MRPTR_VAL 0x20000000
+#define LSRT_VAL  0x32000000
+#define LSDMR_VAL 0x4062D733
+#define LCRR_VAL  0x80000004
+
+/*
+ * DDR-SDRAM registers
+ * FIXME: decode bit settings 
+ */
+#define CS2_BNDS_VAL                 0x00000007
+#define CS3_BNDS_VAL                 0x0008000F
+#define CS2_CONFIG_VAL               0x80000101
+#define CS3_CONFIG_VAL               0x80000101
+#define TIMING_CFG_1_VAL             0x36333321
+#define TIMING_CFG_2_VAL             0x00000800
+#define DDR_SDRAM_CFG_VAL            0xC2000000
+#define DDR_SDRAM_MODE_VAL           0x00000022
+#define DDR_SDRAM_INTTVL_VAL         0x045B0100
+#define DDR_SDRAM_CLK_CNTL_VAL       0x00000000
+
+#else
+#error "board type not defined"
+#endif
+
+#ifndef ASM
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bspopts.h"
+
+#include <rtems.h>
+#include <rtems/console.h>
+#include <rtems/clockdrv.h>
+#include <bsp/irq.h>
+#include <bsp/vectors.h>
+
+/*
+ * Network driver configuration
+ */
+struct rtems_bsdnet_ifconfig;
+extern int rtems_mpc83xx_tsec_driver_attach_detach (struct rtems_bsdnet_ifconfig *config, int attaching);
+#define RTEMS_BSP_NETWORK_DRIVER_NAME	"tsec1"
+#define RTEMS_BSP_NETWORK_DRIVER_ATTACH	rtems_mpc83xx_tsec_driver_attach_detach
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;
+/*
+ * We need to decide how much memory will be non-cacheable. This
+ * will mainly be memory that will be used in DMA (network and serial
+ * buffers).
+ */
+/*
+ *  Stuff for Time Test 27
+ */
+#define MUST_WAIT_FOR_INTERRUPT 0
+
+/*
+ *  Device Driver Table Entries
+ */
+
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+#define BSP_UART1_MINOR 0
+#define BSP_UART2_MINOR 1
+
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+
+/*
+ * indicate, that BSP has no IDE driver
+ */
+#undef RTEMS_BSP_HAS_IDE_DRIVER
+
+/*
+ * How many libio files we want
+ */
+#define BSP_LIBIO_MAX_FDS       20
+
+/* misc macros */
+#define BSP_ARRAY_CNT(arr) (sizeof(arr)/sizeof(arr[0]))
+
+/* functions */
+
+void bsp_cleanup(void);
+
+/* console modes (only termios) */
+#ifdef  PRINTK_MINOR
+#undef  PRINTK_MINOR
+#endif
+#define PRINTK_MINOR BSP_UART1_MINOR
+
+#define SINGLE_CHAR_MODE
+#define UARTS_USE_TERMIOS_INT   1
+
+/*
+ *  Convert decrement value to tenths of microsecnds (used by
+ *  shared timer driver).
+ *
+ *    + CPU has a csb_clock bus,
+ *    + There are 4 bus cycles per click
+ *    + We return value in 1/10 microsecond units.
+ *   Modified following equation to integer equation to remove
+ *   floating point math.
+ *   (int) ((float)(_value) / ((XLB_CLOCK/1000000 * 0.1) / 4.0))
+ */
+#define BSP_CSB_CLK_FRQ (BSP_CLKIN_FRQ * BSP_SYSPLL_MF)
+#define BSP_Convert_decrementer( _value ) \
+  (int) (((_value) * 4000) / (BSP_CSB_CLK_FRQ/10000))
+
+/*
+ * Network driver configuration
+ */
+struct rtems_bsdnet_ifconfig;
+extern int BSP_tsec_attach(struct rtems_bsdnet_ifconfig *config,int attaching);
+#define RTEMS_BSP_NETWORK_DRIVER_NAME	"tsec1"
+#define RTEMS_BSP_NETWORK_DRIVER_ATTACH	BSP_tsec_attach
+
+#define RTEMS_BSP_NETWORK_DRIVER_NAME2	"tsec2"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ASM */
+
+#endif /* GEN83xx */
--- a/c/src/lib/libbsp/powerpc/gen83xx/include/bspopts.h.in
+++ b/c/src/lib/libbsp/powerpc/gen83xx/include/bspopts.h.in
@@ -0,0 +1,24 @@
+/* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */
+
+/* If defined, the data cache will be enabled after address translation is
+   turned on. */
+#undef DATA_CACHE_ENABLE
+
+/* If defined, the instruction cache will be enabled after address translation
+   is turned on. */
+#undef INSTRUCTION_CACHE_ENABLE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
--- a/c/src/lib/libbsp/powerpc/gen83xx/include/coverhd.h
+++ b/c/src/lib/libbsp/powerpc/gen83xx/include/coverhd.h
@@ -0,0 +1,113 @@
+/*  coverhd.h
+ *
+ *  This include file has defines to represent the overhead associated
+ *  with calling a particular directive from C.  These are used in the
+ *  Timing Test Suite to ignore the overhead required to pass arguments
+ *  to directives.  On some CPUs and/or target boards, this overhead
+ *  is significant and makes it difficult to distinguish internal
+ *  RTEMS execution time from that used to call the directive.
+ *  This file should be updated after running the C overhead timing
+ *  test.  Once this update has been performed, the RTEMS Time Test
+ *  Suite should be rebuilt to account for these overhead times in the
+ *  timing results.
+ *
+ *  NOTE:  If these are all zero, then the times reported include
+ *         all calling overhead including passing of arguments.
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  coverhd.h,v 1.2 2003/09/04 18:52:27 joel Exp
+ */
+
+#ifndef __COVERHD_h
+#define __COVERHD_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CALLING_OVERHEAD_INITIALIZE_EXECUTIVE      0
+#define CALLING_OVERHEAD_SHUTDOWN_EXECUTIVE        0
+#define CALLING_OVERHEAD_TASK_CREATE               0
+#define CALLING_OVERHEAD_TASK_IDENT                0
+#define CALLING_OVERHEAD_TASK_START                0
+#define CALLING_OVERHEAD_TASK_RESTART              0
+#define CALLING_OVERHEAD_TASK_DELETE               0
+#define CALLING_OVERHEAD_TASK_SUSPEND              0
+#define CALLING_OVERHEAD_TASK_RESUME               0
+#define CALLING_OVERHEAD_TASK_SET_PRIORITY         0
+#define CALLING_OVERHEAD_TASK_MODE                 0
+#define CALLING_OVERHEAD_TASK_GET_NOTE             0
+#define CALLING_OVERHEAD_TASK_SET_NOTE             0
+#define CALLING_OVERHEAD_TASK_WAKE_WHEN            2
+#define CALLING_OVERHEAD_TASK_WAKE_AFTER           0
+#define CALLING_OVERHEAD_INTERRUPT_CATCH           0
+#define CALLING_OVERHEAD_CLOCK_GET                 2
+#define CALLING_OVERHEAD_CLOCK_SET                 2
+#define CALLING_OVERHEAD_CLOCK_TICK                0
+
+#define CALLING_OVERHEAD_TIMER_CREATE              0
+#define CALLING_OVERHEAD_TIMER_IDENT               0
+#define CALLING_OVERHEAD_TIMER_DELETE              0
+#define CALLING_OVERHEAD_TIMER_FIRE_AFTER          0
+#define CALLING_OVERHEAD_TIMER_FIRE_WHEN           2
+#define CALLING_OVERHEAD_TIMER_RESET               0
+#define CALLING_OVERHEAD_TIMER_CANCEL              0
+#define CALLING_OVERHEAD_SEMAPHORE_CREATE          0
+#define CALLING_OVERHEAD_SEMAPHORE_IDENT           0
+#define CALLING_OVERHEAD_SEMAPHORE_DELETE          0
+#define CALLING_OVERHEAD_SEMAPHORE_OBTAIN          0
+#define CALLING_OVERHEAD_SEMAPHORE_RELEASE         0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_CREATE      0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_IDENT       0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_DELETE      0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_SEND        0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_URGENT      0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_BROADCAST   0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_RECEIVE     0
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_FLUSH       0
+
+#define CALLING_OVERHEAD_EVENT_SEND                0
+#define CALLING_OVERHEAD_EVENT_RECEIVE             0
+#define CALLING_OVERHEAD_SIGNAL_CATCH              0
+#define CALLING_OVERHEAD_SIGNAL_SEND               0
+#define CALLING_OVERHEAD_PARTITION_CREATE          0
+#define CALLING_OVERHEAD_PARTITION_IDENT           0
+#define CALLING_OVERHEAD_PARTITION_DELETE          0
+#define CALLING_OVERHEAD_PARTITION_GET_BUFFER      0
+#define CALLING_OVERHEAD_PARTITION_RETURN_BUFFER   0
+#define CALLING_OVERHEAD_REGION_CREATE             0
+#define CALLING_OVERHEAD_REGION_IDENT              0
+#define CALLING_OVERHEAD_REGION_DELETE             0
+#define CALLING_OVERHEAD_REGION_GET_SEGMENT        0
+#define CALLING_OVERHEAD_REGION_RETURN_SEGMENT     0
+#define CALLING_OVERHEAD_PORT_CREATE               0
+#define CALLING_OVERHEAD_PORT_IDENT                0
+#define CALLING_OVERHEAD_PORT_DELETE               0
+#define CALLING_OVERHEAD_PORT_EXTERNAL_TO_INTERNAL 0
+#define CALLING_OVERHEAD_PORT_INTERNAL_TO_EXTERNAL 0
+
+#define CALLING_OVERHEAD_IO_INITIALIZE             0
+#define CALLING_OVERHEAD_IO_OPEN                   0
+#define CALLING_OVERHEAD_IO_CLOSE                  0
+#define CALLING_OVERHEAD_IO_READ                   0
+#define CALLING_OVERHEAD_IO_WRITE                  0
+#define CALLING_OVERHEAD_IO_CONTROL                0
+#define CALLING_OVERHEAD_FATAL_ERROR_OCCURRED      0
+#define CALLING_OVERHEAD_RATE_MONOTONIC_CREATE     0
+#define CALLING_OVERHEAD_RATE_MONOTONIC_IDENT      0
+#define CALLING_OVERHEAD_RATE_MONOTONIC_DELETE     0
+#define CALLING_OVERHEAD_RATE_MONOTONIC_CANCEL     0
+#define CALLING_OVERHEAD_RATE_MONOTONIC_PERIOD     0
+#define CALLING_OVERHEAD_MULTIPROCESSING_ANNOUNCE  0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/c/src/lib/libbsp/powerpc/gen83xx/include/tm27.h
+++ b/c/src/lib/libbsp/powerpc/gen83xx/include/tm27.h
@@ -0,0 +1,63 @@
+/*
+ *  tm27.h
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  tm27.h,v 1.2 2004/04/23 04:47:38 ralf Exp
+ */
+
+#ifndef _RTEMS_TMTEST27
+#error "This is an RTEMS internal file you must not include directly."
+#endif
+
+#ifndef __tm27_h
+#define __tm27_h
+
+#include <bsp/irq.h>
+
+/*
+ *  Stuff for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 1
+
+void nullFunc() {}
+
+static rtems_irq_connect_data clockIrqData = {BSP_DECREMENTER,
+                                              0,
+                                              (rtems_irq_enable)nullFunc,
+                                              (rtems_irq_disable)nullFunc,
+                                              (rtems_irq_is_enabled) nullFunc};
+void Install_tm27_vector(void (*_handler)())
+{
+  clockIrqData.hdl = _handler;
+  if (!BSP_install_rtems_irq_handler (&clockIrqData)) {
+        printk("Error installing clock interrupt handler!\n");
+        rtems_fatal_error_occurred(1);
+  }
+}
+
+#define Cause_tm27_intr()  \
+  do { \
+    uint32_t   _clicks = 8; \
+    asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \
+  } while (0)
+
+#define Clear_tm27_intr() \
+  do { \
+    uint32_t   _clicks = 0xffffffff; \
+    asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \
+  } while (0)
+
+#define Lower_tm27_intr() \
+  do { \
+    uint32_t   _msr = 0; \
+    _ISR_Set_level( 0 ); \
+    asm volatile( "mfmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \
+    _msr |=  0x8002; \
+    asm volatile( "mtmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \
+  } while (0)
+
+#endif
--- a/c/src/lib/libbsp/powerpc/gen83xx/irq/ipic.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/irq/ipic.c
@@ -0,0 +1,394 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file integrates the IPIC irq controller                    |
+\*===============================================================*/
+
+#include <mpc83xx/mpc83xx.h>
+#include <rtems.h>
+#include <rtems/bspIo.h>
+#include <bsp.h>
+#include <bsp/irq.h>
+#include <rtems/powerpc/powerpc.h>
+
+typedef struct {
+  volatile uint32_t *pend_reg;
+  volatile uint32_t *mask_reg;
+  const    uint32_t  bit_num;
+} BSP_isrc_rsc_t;
+
+const BSP_isrc_rsc_t BSP_ipic_isrc_rsc[] = {
+  /* vector 0 */
+  {&mpc83xx.ipic.sersr,&mpc83xx.ipic.sermr,31},
+  {NULL,NULL,0},
+  {NULL,NULL,0},
+  {NULL,NULL,0},
+  {NULL,NULL,0},
+  {NULL,NULL,0},
+  {NULL,NULL,0},
+  {NULL,NULL,0},
+  /* vector  8 */
+  {NULL,NULL,0}, /* reserved vector  8 */
+  /* vector  9: UART1 SIxxR_H, Bit 24 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0],24},
+  /* vector 10: UART2 SIxxR_H, Bit 25 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0],25},
+  /* vector 11: SEC   SIxxR_H, Bit 26 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0],26},
+  {NULL,NULL,0}, /* reserved vector 12 */
+  {NULL,NULL,0}, /* reserved vector 13 */
+  /* vector 14: I2C1 SIxxR_H, Bit 29 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0],29},
+  /* vector 15: I2C2 SIxxR_H, Bit 30 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0],30},
+  /* vector 16: SPI  SIxxR_H, Bit 31 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0],31},
+  /* vector 17: IRQ1 SExxR  , Bit  1 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 1},
+  /* vector 18: IRQ2 SExxR  , Bit  2 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 2},
+  /* vector 19: IRQ3 SExxR  , Bit  3 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 3},
+  /* vector 20: IRQ4 SExxR  , Bit  4 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 4},
+  /* vector 21: IRQ5 SExxR  , Bit  5 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 5},
+  /* vector 22: IRQ6 SExxR  , Bit  6 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 6},
+  /* vector 23: IRQ7 SExxR  , Bit  7 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 7},
+  {NULL,NULL,0}, /* reserved vector 24 */
+  {NULL,NULL,0}, /* reserved vector 25 */
+  {NULL,NULL,0}, /* reserved vector 26 */
+  {NULL,NULL,0}, /* reserved vector 27 */
+  {NULL,NULL,0}, /* reserved vector 28 */
+  {NULL,NULL,0}, /* reserved vector 29 */
+  {NULL,NULL,0}, /* reserved vector 30 */
+  {NULL,NULL,0}, /* reserved vector 31 */
+  /* vector 32: TSEC1 Tx  SIxxR_H  , Bit  0 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 0},
+  /* vector 33: TSEC1 Rx  SIxxR_H  , Bit  1 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 1},
+  /* vector 34: TSEC1 Err SIxxR_H  , Bit  2 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 2},
+  /* vector 35: TSEC2 Tx  SIxxR_H  , Bit  3 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 3},
+  /* vector 36: TSEC2 Rx  SIxxR_H  , Bit  4 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 4},
+  /* vector 37: TSEC2 Err SIxxR_H  , Bit  5 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 5},
+  /* vector 38: USB DR    SIxxR_H  , Bit  6 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 6},
+  /* vector 39: USB MPH   SIxxR_H  , Bit  7 */
+  {&mpc83xx.ipic.sipnr[0],&mpc83xx.ipic.simsr[0], 7},
+  {NULL,NULL,0}, /* reserved vector 40 */
+  {NULL,NULL,0}, /* reserved vector 41 */
+  {NULL,NULL,0}, /* reserved vector 42 */
+  {NULL,NULL,0}, /* reserved vector 43 */
+  {NULL,NULL,0}, /* reserved vector 44 */
+  {NULL,NULL,0}, /* reserved vector 45 */
+  {NULL,NULL,0}, /* reserved vector 46 */
+  {NULL,NULL,0}, /* reserved vector 47 */
+  /* vector 48: IRQ0 SExxR  , Bit  0 */
+  {&mpc83xx.ipic.sepnr   ,&mpc83xx.ipic.semsr   , 0},
+  {NULL,NULL,0}, /* reserved vector 49 */
+  {NULL,NULL,0}, /* reserved vector 50 */
+  {NULL,NULL,0}, /* reserved vector 51 */
+  {NULL,NULL,0}, /* reserved vector 52 */
+  {NULL,NULL,0}, /* reserved vector 53 */
+  {NULL,NULL,0}, /* reserved vector 54 */
+  {NULL,NULL,0}, /* reserved vector 55 */
+  {NULL,NULL,0}, /* reserved vector 56 */
+  {NULL,NULL,0}, /* reserved vector 57 */
+  {NULL,NULL,0}, /* reserved vector 58 */
+  {NULL,NULL,0}, /* reserved vector 59 */
+  {NULL,NULL,0}, /* reserved vector 60 */
+  {NULL,NULL,0}, /* reserved vector 61 */
+  {NULL,NULL,0}, /* reserved vector 62 */
+  {NULL,NULL,0}, /* reserved vector 63 */
+  /* vector 64: RTC SEC   SIxxR_L  , Bit  0 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 0},
+  /* vector 65: PIT       SIxxR_L  , Bit  1 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 1},
+  /* vector 66: PCI1      SIxxR_L  , Bit  2 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 2},
+  /* vector 67: PCI2      SIxxR_L  , Bit  3 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 3},
+  /* vector 68: RTC ALR   SIxxR_L  , Bit  4 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 4},
+  /* vector 69: MU        SIxxR_L  , Bit  5 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 5},
+  /* vector 70: SBA       SIxxR_L  , Bit  6 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 6},
+  /* vector 71: DMA       SIxxR_L  , Bit  7 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 7},
+  /* vector 72: GTM4      SIxxR_L  , Bit  8 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 8},
+  /* vector 73: GTM8      SIxxR_L  , Bit  9 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1], 9},
+  /* vector 74: GPIO1     SIxxR_L  , Bit 10 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],10},
+  /* vector 75: GPIO2     SIxxR_L  , Bit 11 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],11},
+  /* vector 76: DDR       SIxxR_L  , Bit 12 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],12},
+  /* vector 77: LBC       SIxxR_L  , Bit 13 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],13},
+  /* vector 78: GTM2      SIxxR_L  , Bit 14 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],14},
+  /* vector 79: GTM6      SIxxR_L  , Bit 15 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],15},
+  /* vector 80: PMC       SIxxR_L  , Bit 16 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],16},
+  {NULL,NULL,0}, /* reserved vector 81 */
+  {NULL,NULL,0}, /* reserved vector 82 */
+  {NULL,NULL,0}, /* reserved vector 63 */
+  /* vector 84: GTM3      SIxxR_L  , Bit 20 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],20},
+  /* vector 85: GTM7      SIxxR_L  , Bit 21 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],21},
+  {NULL,NULL,0}, /* reserved vector 81 */
+  {NULL,NULL,0}, /* reserved vector 82 */
+  {NULL,NULL,0}, /* reserved vector 63 */
+  {NULL,NULL,0}, /* reserved vector 63 */
+  /* vector 90: GTM1      SIxxR_L  , Bit 26 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],26},
+  /* vector 91: GTM5      SIxxR_L  , Bit 27 */
+  {&mpc83xx.ipic.sipnr[1],&mpc83xx.ipic.simsr[1],27}
+};
+
+/*
+ * data structure to handle all mask registers in the IPIC
+ */
+typedef struct {
+  uint32_t simsr_mask[2];
+  uint32_t semsr_mask;
+  uint32_t sermr_mask;
+} BSP_ipic_mask_t;
+
+/*
+ * this array will be filled with mask values needed 
+ * to temporarily disable all IRQ soures with lower or same
+ * priority of the current source (whose vector is the array index)
+ */
+BSP_ipic_mask_t BSP_ipic_prio2mask[BSP_ARRAY_CNT(BSP_ipic_isrc_rsc)];
+
+
+/*
+ * functions to enable/disable a source at the ipic
+ */
+void BSP_irq_enable_at_ipic (rtems_irq_number irqnum)
+{
+  uint32_t vecnum = irqnum - BSP_IPIC_IRQ_LOWEST_OFFSET;
+  const BSP_isrc_rsc_t *rsc_ptr;
+  
+  if ((vecnum >= 0) 
+      && (vecnum < BSP_ARRAY_CNT(BSP_ipic_isrc_rsc))) {
+    rsc_ptr = &BSP_ipic_isrc_rsc[vecnum];
+    if (rsc_ptr->mask_reg != NULL) {
+      *(rsc_ptr->mask_reg) |= 1 << (31-rsc_ptr->bit_num);
+    }
+  }
+}
+
+void BSP_irq_disable_at_ipic (rtems_irq_number irqnum)
+{
+  uint32_t vecnum = irqnum - BSP_IPIC_IRQ_LOWEST_OFFSET;
+  const BSP_isrc_rsc_t *rsc_ptr;
+  
+  if ((vecnum >= 0) 
+      && (vecnum < BSP_ARRAY_CNT(BSP_ipic_isrc_rsc))) {
+    rsc_ptr = &BSP_ipic_isrc_rsc[vecnum];
+    if (rsc_ptr->mask_reg != NULL) {
+      *(rsc_ptr->mask_reg) &= ~(1 << (31-rsc_ptr->bit_num));
+    }
+  }
+}
+
+
+/*
+ *  IRQ Handler: this is called from the primary exception dispatcher
+ */
+rtems_status_code BSP_irq_handle_at_ipic(uint32_t excNum)
+{
+  rtems_status_code rc = RTEMS_SUCCESSFUL;
+  rtems_irq_connect_data *tbl_entry;
+  int32_t vecnum;
+  uint32_t msr_value;
+  uint32_t msr_save;
+  uint32_t msr_enable = 0;
+  BSP_ipic_mask_t mask_save;
+  const BSP_ipic_mask_t *mask_ptr;
+  /*
+   * get vector
+   */
+  switch(excNum) {
+  case ASM_EXT_VECTOR:
+    vecnum = MPC83xx_VCR_TO_VEC(mpc83xx.ipic.sivcr);
+    msr_enable = PPC_MSR_EE;
+    break;
+  case ASM_SYSMGMT_VECTOR:
+    vecnum = MPC83xx_VCR_TO_VEC(mpc83xx.ipic.smvcr);
+    msr_enable = PPC_MSR_EE;
+    break;
+#if defined(ASM_CRIT_VECTOR)
+  case ASM_CRIT_VECTOR:
+    vecnum = MPC83xx_VCR_TO_VEC(mpc83xx.ipic.scvcr);
+    break;
+#endif
+  default:
+    vecnum = -1;
+  }
+  /*
+   * check vector number
+   */
+  if ((vecnum >= 0) 
+      && (vecnum < BSP_ARRAY_CNT(BSP_ipic_isrc_rsc))) {
+    /*
+     * save current mask registers
+     */
+    mask_save.simsr_mask[0] = mpc83xx.ipic.simsr[0];
+    mask_save.simsr_mask[1] = mpc83xx.ipic.simsr[1];
+    mask_save.semsr_mask    = mpc83xx.ipic.semsr   ;
+    mask_save.sermr_mask    = mpc83xx.ipic.sermr   ;
+    /*
+     * mask all lower prio interrupts
+     */
+    mask_ptr = &BSP_ipic_prio2mask[vecnum];
+    mpc83xx.ipic.simsr[0] &= mask_ptr->simsr_mask[0];
+    mpc83xx.ipic.simsr[1] &= mask_ptr->simsr_mask[1];
+    mpc83xx.ipic.semsr    &= mask_ptr->semsr_mask   ;
+    mpc83xx.ipic.sermr    &= mask_ptr->sermr_mask   ;
+    /*
+     * reenable msr_ee
+     */
+    _CPU_MSR_GET(msr_value);
+    msr_save   = msr_value;
+    msr_value |= msr_enable;
+    _CPU_MSR_SET(msr_value);
+    /*
+     * call handler
+     */
+    tbl_entry = &BSP_rtems_irq_tbl[vecnum+BSP_IPIC_IRQ_LOWEST_OFFSET];
+    if (tbl_entry->hdl != NULL) {
+      (tbl_entry->hdl) (tbl_entry->handle);
+    } else {
+      printk("IPIC: Spurious interrupt; excNum=0x%x, vector=0x%02x\n\r",
+	     excNum,vecnum);
+    }
+    /*
+     * disable msr_enable
+     */
+    _CPU_MSR_SET(msr_save);
+    /*
+     * restore initial masks
+     */
+    mpc83xx.ipic.simsr[0] = mask_save.simsr_mask[0];
+    mpc83xx.ipic.simsr[1] = mask_save.simsr_mask[1];
+    mpc83xx.ipic.semsr    = mask_save.semsr_mask   ;
+    mpc83xx.ipic.sermr    = mask_save.sermr_mask   ;
+  }
+  return rc;
+}
+
+
+/*
+ * fill the array BSP_ipic_prio2mask to allow masking of lower prio sources
+ * to implement nested interrupts
+ */
+rtems_status_code BSP_ipic_calc_prio2mask(void)
+{
+  rtems_status_code rc = RTEMS_SUCCESSFUL;
+  /*
+   * FIXME: fill the array
+   */
+  return rc;
+}
+
+/*
+ * activate the interrupt controller
+ */
+rtems_status_code BSP_ipic_intc_init(void)
+{
+  uint32_t msr_value;
+  rtems_status_code rc = RTEMS_SUCCESSFUL;
+
+  /* 
+   * mask off all interrupts 
+   */
+  mpc83xx.ipic.simsr[0] = 0;
+  mpc83xx.ipic.simsr[1] = 0;
+  mpc83xx.ipic.semsr    = 0;
+  mpc83xx.ipic.sermr    = 0;
+  /*
+   * set desired configuration as defined in bspopts.h
+   * normally, the default values should be fine
+   */
+#if defined(BSP_SICFR_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.sicfr = BSP_SICFR_VAL;
+#endif
+
+  /*
+   * set desired priorities as defined in bspopts.h
+   * normally, the default values should be fine
+   */
+#if defined(BSP_SIPRR0_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.siprr[0] = BSP_SIPRR0_VAL;
+#endif
+
+#if defined(BSP_SIPRR1_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.siprr[1] = BSP_SIPRR1_VAL;
+#endif
+
+#if defined(BSP_SIPRR2_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.siprr[2] = BSP_SIPRR2_VAL;
+#endif
+
+#if defined(BSP_SIPRR3_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.siprr[3] = BSP_SIPRR3_VAL;
+#endif
+
+#if defined(BSP_SMPRR0_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.smprr[0] = BSP_SMPRR0_VAL;
+#endif
+
+#if defined(BSP_SMPRR1_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.smprr[1] = BSP_SMPRR1_VAL;
+#endif
+
+#if defined(BSP_SECNR_VAL) /* defined in bspopts.h ? */
+  mpc83xx.ipic.secnr    = BSP_SECNR_VAL;
+#endif
+
+  /*
+   * calculate priority masks
+   */
+  rc = BSP_ipic_calc_prio2mask();
+  if (rc == RTEMS_SUCCESSFUL) {
+    /*
+     * enable (non-critical) exceptions
+     */
+    
+    _CPU_MSR_GET(msr_value);
+    msr_value |= PPC_MSR_EE;
+    _CPU_MSR_SET(msr_value);
+    
+    /* install exit handler to close ipic when program atexit called */
+    /* atexit(ipic_intc_exit); */
+  }
+  return rc;
+}
+
--- a/c/src/lib/libbsp/powerpc/gen83xx/irq/irq.h
+++ b/c/src/lib/libbsp/powerpc/gen83xx/irq/irq.h
@@ -0,0 +1,149 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file declares constants of the interrupt controller        |
+\*===============================================================*/
+#ifndef GEN83xx_IRQ_IRQ_H
+#define GEN83xx_IRQ_IRQ_H
+
+#include <rtems.h>
+#include <rtems/irq.h>
+
+/*
+ * the following definitions specify the indices used 
+ * to interface the interrupt handler API
+ */
+
+/*
+ * Base index for the module specific irq handlers
+ */
+#define BSP_ASM_IRQ_VECTOR_BASE 0x0
+#define BSP_IPIC_VECTOR_BASE	BSP_ASM_IRQ_VECTOR_BASE
+
+/*
+ * Peripheral IRQ handlers related definitions
+ */
+#define BSP_IPIC_PER_IRQ_NUMBER	        128
+#define BSP_IPIC_IRQ_LOWEST_OFFSET   BSP_IPIC_VECTOR_BASE  /* 0 */
+#define BSP_IPIC_IRQ_MAX_OFFSET      (BSP_IPIC_IRQ_LOWEST_OFFSET\
+                                         +BSP_IPIC_PER_IRQ_NUMBER-1)
+
+#define BSP_IS_IPIC_IRQ(irqnum)				\
+          (((irqnum) >= BSP_IPIC_IRQ_LOWEST_OFFSET) &&	\
+	   ((irqnum) <= BSP_IPIC_IRQ_MAX_OFFSET))
+/*
+ * Processor IRQ handlers related definitions
+ */
+#define BSP_PROCESSOR_IRQ_NUMBER        1
+#define BSP_PROCESSOR_IRQ_LOWEST_OFFSET	(BSP_IPIC_IRQ_MAX_OFFSET+1)
+#define BSP_PROCESSOR_IRQ_MAX_OFFSET	(BSP_PROCESSOR_IRQ_LOWEST_OFFSET\
+                                         +BSP_PROCESSOR_IRQ_NUMBER-1)
+
+#define BSP_IS_PROCESSOR_IRQ(irqnum)				\
+          (((irqnum) >= BSP_PROCESSOR_IRQ_LOWEST_OFFSET) &&	\
+	   ((irqnum) <= BSP_PROCESSOR_IRQ_MAX_OFFSET))
+/*
+ * Summary
+ */
+#define BSP_IRQ_NUMBER                  (BSP_PROCESSOR_IRQ_MAX_OFFSET+1)
+#define BSP_LOWEST_OFFSET		BSP_IPIC_IRQ_LOWEST_OFFSET
+#define BSP_MAX_OFFSET                  BSP_PROCESSOR_IRQ_MAX_OFFSET
+
+#define BSP_IS_VALID_IRQ(irqnum) 	\
+          (BSP_IS_PROCESSOR_IRQ(irqnum)	\
+           || BSP_IS_IPIC_IRQ(irqnum))
+
+#ifndef ASM
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * index table for the module specific handlers, a few entries are only placeholders
+ */
+  typedef enum {
+    BSP_IPIC_IRQ_FIRST	   = BSP_IPIC_IRQ_LOWEST_OFFSET,
+    BSP_IPIC_IRQ_ERROR	   = BSP_IPIC_IRQ_LOWEST_OFFSET +  0,
+    /* reserved irqs  1- 8 */
+    BSP_IPIC_IRQ_UART1	   = BSP_IPIC_IRQ_LOWEST_OFFSET +  9,
+    BSP_IPIC_IRQ_UART2 	   = BSP_IPIC_IRQ_LOWEST_OFFSET + 10,
+    BSP_IPIC_IRQ_SEC  	   = BSP_IPIC_IRQ_LOWEST_OFFSET + 11,
+    /* reserved irqs 12-13 */
+    BSP_IPIC_IRQ_I2C1      = BSP_IPIC_IRQ_LOWEST_OFFSET + 14,
+    BSP_IPIC_IRQ_I2C2      = BSP_IPIC_IRQ_LOWEST_OFFSET + 15,
+    BSP_IPIC_IRQ_SPI       = BSP_IPIC_IRQ_LOWEST_OFFSET + 16,
+    BSP_IPIC_IRQ_IRQ1      = BSP_IPIC_IRQ_LOWEST_OFFSET + 17,
+    BSP_IPIC_IRQ_IRQ2      = BSP_IPIC_IRQ_LOWEST_OFFSET + 18,
+    BSP_IPIC_IRQ_IRQ3      = BSP_IPIC_IRQ_LOWEST_OFFSET + 19,
+    BSP_IPIC_IRQ_IRQ4      = BSP_IPIC_IRQ_LOWEST_OFFSET + 20,
+    BSP_IPIC_IRQ_IRQ5      = BSP_IPIC_IRQ_LOWEST_OFFSET + 21,
+    BSP_IPIC_IRQ_IRQ6      = BSP_IPIC_IRQ_LOWEST_OFFSET + 22,
+    BSP_IPIC_IRQ_IRQ7      = BSP_IPIC_IRQ_LOWEST_OFFSET + 23,
+    /* reserved irqs 24-31 */
+    BSP_IPIC_IRQ_TSEC1_TX  = BSP_IPIC_IRQ_LOWEST_OFFSET + 32,
+    BSP_IPIC_IRQ_TSEC1_RX  = BSP_IPIC_IRQ_LOWEST_OFFSET + 33,
+    BSP_IPIC_IRQ_TSEC1_ERR = BSP_IPIC_IRQ_LOWEST_OFFSET + 34,
+    BSP_IPIC_IRQ_TSEC2_TX  = BSP_IPIC_IRQ_LOWEST_OFFSET + 35,
+    BSP_IPIC_IRQ_TSEC2_RX  = BSP_IPIC_IRQ_LOWEST_OFFSET + 36,
+    BSP_IPIC_IRQ_TSEC2_ERR = BSP_IPIC_IRQ_LOWEST_OFFSET + 37,
+    BSP_IPIC_IRQ_USB_DR    = BSP_IPIC_IRQ_LOWEST_OFFSET + 38,
+    BSP_IPIC_IRQ_USB_MPH   = BSP_IPIC_IRQ_LOWEST_OFFSET + 39,
+    /* reserved irqs 40-47 */
+    BSP_IPIC_IRQ_IRQ0      = BSP_IPIC_IRQ_LOWEST_OFFSET + 48,
+    /* reserved irqs 49-63 */
+    BSP_IPIC_IRQ_RTC_SEC   = BSP_IPIC_IRQ_LOWEST_OFFSET + 64,
+    BSP_IPIC_IRQ_PIT       = BSP_IPIC_IRQ_LOWEST_OFFSET + 65,
+    BSP_IPIC_IRQ_PCI1      = BSP_IPIC_IRQ_LOWEST_OFFSET + 66,
+    BSP_IPIC_IRQ_PCI2      = BSP_IPIC_IRQ_LOWEST_OFFSET + 67,
+    BSP_IPIC_IRQ_RTC_ALR   = BSP_IPIC_IRQ_LOWEST_OFFSET + 68,
+    BSP_IPIC_IRQ_MU        = BSP_IPIC_IRQ_LOWEST_OFFSET + 69,
+    BSP_IPIC_IRQ_SBA       = BSP_IPIC_IRQ_LOWEST_OFFSET + 70,
+    BSP_IPIC_IRQ_DMA       = BSP_IPIC_IRQ_LOWEST_OFFSET + 71,
+    BSP_IPIC_IRQ_GTM4      = BSP_IPIC_IRQ_LOWEST_OFFSET + 72,
+    BSP_IPIC_IRQ_GTM8      = BSP_IPIC_IRQ_LOWEST_OFFSET + 73,
+    BSP_IPIC_IRQ_GPIO1     = BSP_IPIC_IRQ_LOWEST_OFFSET + 74,
+    BSP_IPIC_IRQ_GPIO2     = BSP_IPIC_IRQ_LOWEST_OFFSET + 75,
+    BSP_IPIC_IRQ_DDR       = BSP_IPIC_IRQ_LOWEST_OFFSET + 76,
+    BSP_IPIC_IRQ_LBC       = BSP_IPIC_IRQ_LOWEST_OFFSET + 77,
+    BSP_IPIC_IRQ_GTM2      = BSP_IPIC_IRQ_LOWEST_OFFSET + 78,
+    BSP_IPIC_IRQ_GTM6      = BSP_IPIC_IRQ_LOWEST_OFFSET + 79,
+    BSP_IPIC_IRQ_PMC       = BSP_IPIC_IRQ_LOWEST_OFFSET + 80,
+    /* reserved irqs 81-83 */
+    BSP_IPIC_IRQ_GTM3      = BSP_IPIC_IRQ_LOWEST_OFFSET + 84,
+    BSP_IPIC_IRQ_GTM7      = BSP_IPIC_IRQ_LOWEST_OFFSET + 85,
+    /* reserved irqs 86-89 */
+    BSP_IPIC_IRQ_GTM1      = BSP_IPIC_IRQ_LOWEST_OFFSET + 90,
+    BSP_IPIC_IRQ_GTM5      = BSP_IPIC_IRQ_LOWEST_OFFSET + 91,
+    /* reserved irqs 92-127 */
+
+    BSP_IPIC_IRQ_LAST     = BSP_IPIC_IRQ_MAX_OFFSET,
+    BSP_DECREMENTER       = BSP_PROCESSOR_IRQ_LOWEST_OFFSET + 0
+  } rtems_irq_symbolic_name;
+
+  extern rtems_irq_connect_data *BSP_rtems_irq_tbl;
+  void BSP_rtems_irq_mng_init(unsigned cpuId);
+
+  /* ipic.c */
+  rtems_status_code BSP_irq_handle_at_ipic(uint32_t excNum);
+  void BSP_irq_enable_at_ipic (rtems_irq_number irqnum);
+  void BSP_irq_disable_at_ipic (rtems_irq_number irqnum);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* ASM */
+
+#endif /* GEN83XX_IRQ_IRQ_H */
--- a/c/src/lib/libbsp/powerpc/gen83xx/irq/irq_init.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/irq/irq_init.c
@@ -0,0 +1,413 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the irq controller init code                 |
+-----------------------------------------------------------------+
+| derived from the virtex BSP                                     |
+\*===============================================================*/
+#include <libcpu/spr.h>
+#include <bsp/irq.h>
+#include <bsp.h>
+#include <libcpu/raw_exception.h>
+#include <rtems/bspIo.h>
+#include <rtems/powerpc/powerpc.h>
+#include <bsp/vectors.h>
+
+static rtems_irq_connect_data rtemsIrqTbl[BSP_IRQ_NUMBER];
+rtems_irq_connect_data *BSP_rtems_irq_tbl;
+rtems_irq_global_settings* BSP_rtems_irq_config;
+
+/***********************************************************
+ * dummy functions for on/off/isOn calls
+ * these functions just do nothing fulfill the semantic
+ * requirements to enable/disable a certain interrupt or exception
+ */
+void BSP_irq_nop_func(const rtems_irq_connect_data *unused)
+{
+  /*
+   * nothing to do
+   */
+}
+
+void BSP_irq_nop_hdl(void *hdl)
+{
+  /*
+   * nothing to do
+   */
+}
+
+int BSP_irq_true_func(const rtems_irq_connect_data *unused)
+{
+  /*
+   * nothing to do
+   */
+  return TRUE;
+}
+
+/***********************************************************
+ * interrupt handler and its enable/disable functions
+ ***********************************************************/
+
+/***********************************************************
+ * functions to enable/disable/query external/critical interrupts
+ */
+void BSP_irqexc_on_fnc(rtems_irq_connect_data *conn_data)
+{
+  uint32_t msr_value;
+  /*
+   * get current MSR value
+   */
+  _CPU_MSR_GET(msr_value);
+
+
+   msr_value |= PPC_MSR_EE;
+   _CPU_MSR_SET(msr_value);
+}
+
+void BSP_irqexc_off_fnc(rtems_irq_connect_data *unused)
+{
+  /*
+   * nothing to do
+   */
+}
+
+/***********************************************************
+ * High level IRQ handler called from shared_raw_irq_code_entry
+ */
+void C_dispatch_irq_handler (CPU_Interrupt_frame *frame, unsigned int excNum)
+{
+  uint32_t msr_value,new_msr;
+
+  /*
+   * Handle interrupt
+   */
+  switch(excNum) {
+  case ASM_DEC_VECTOR:
+    _CPU_MSR_GET(msr_value);
+    new_msr = msr_value | MSR_EE;
+    _CPU_MSR_SET(new_msr);
+    
+    BSP_rtems_irq_tbl[BSP_DECREMENTER].hdl
+      (BSP_rtems_irq_tbl[BSP_DECREMENTER].handle);
+    
+    _CPU_MSR_SET(msr_value);
+    
+    break;
+#if 0 /* Critical interrupts not yet supported */
+  case ASM_CRIT_VECTOR:
+#endif
+  case ASM_SYSMGMT_VECTOR:
+  case ASM_EXT_VECTOR:
+    BSP_irq_handle_at_ipic(excNum);
+    break;
+  }
+}
+  
+void _ThreadProcessSignalsFromIrq (BSP_Exception_frame* ctx)
+{
+  /*
+   * Process pending signals that have not already been
+   * processed by _Thread_Displatch. This happens quite
+   * unfrequently : the ISR must have posted an action
+   * to the current running thread.
+   */
+  if ( _Thread_Do_post_task_switch_extension ||
+       _Thread_Executing->do_post_task_switch_extension ) {
+    _Thread_Executing->do_post_task_switch_extension = FALSE;
+    _API_extensions_Run_postswitch();
+  }
+}
+
+/***********************************************************
+ * functions to set/get/remove interrupt handlers
+ ***********************************************************/
+int BSP_install_rtems_irq_handler  (const rtems_irq_connect_data* irq)
+{
+  unsigned int level;
+  /*
+   * check for valid irq name
+   * if invalid, print error and return 0
+   */
+  if (!BSP_IS_VALID_IRQ(irq->name)) {
+    printk("Invalid interrupt vector %d\n",irq->name);
+    return 0;
+  }
+
+  /*
+   * disable interrupts
+   */
+  _CPU_ISR_Disable(level);
+  /*
+   * check, that default handler is installed now
+   */
+  if (rtemsIrqTbl[irq->name].hdl != BSP_rtems_irq_config->defaultEntry.hdl) {
+    _CPU_ISR_Enable(level);
+    printk("IRQ vector %d already connected\n",irq->name);
+    return 0;
+  }
+  /*
+   * store new handler data
+   */
+  rtemsIrqTbl[irq->name] = *irq;
+
+  /*
+   * enable irq at interrupt controller
+   */
+  if (BSP_IS_IPIC_IRQ(irq->name)) {
+    BSP_irq_enable_at_ipic(irq->name);
+  }
+  /*
+   * call "on" function to enable interrupt at device
+   */
+  irq->on(irq);
+  /*
+   * reenable interrupts
+   */
+  _CPU_ISR_Enable(level);
+
+  return 1;
+}
+
+int BSP_get_current_rtems_irq_handler	(rtems_irq_connect_data* irq)
+{
+  unsigned int level;
+  
+  /*
+   * check for valid IRQ name
+   */
+  if (!BSP_IS_VALID_IRQ(irq->name)) {
+    return 0;
+  }
+  _CPU_ISR_Disable(level);
+  /*
+   * return current IRQ entry
+   */
+  *irq = rtemsIrqTbl[irq->name];
+  _CPU_ISR_Enable(level);
+  return 1;
+}
+
+int BSP_remove_rtems_irq_handler  (const rtems_irq_connect_data* irq)
+{
+  unsigned int level;
+  
+  /*
+   * check for valid IRQ name
+   */
+  if (!BSP_IS_VALID_IRQ(irq->name)) {
+    return 0;
+  }
+  _CPU_ISR_Disable(level);
+  /*
+   * check, that specified handler is really connected now
+   */
+  if (rtemsIrqTbl[irq->name].hdl != irq->hdl) {
+    _CPU_ISR_Enable(level);
+    return 0;
+  }
+  /*
+   * disable interrupt at interrupt controller
+   */
+  if (BSP_IS_IPIC_IRQ(irq->name)) {
+    BSP_irq_disable_at_ipic(irq->name);
+  }
+  /*
+   * disable interrupt at source
+   */
+  irq->off(irq);
+  /*
+   * restore default interrupt handler
+   */
+  rtemsIrqTbl[irq->name] = BSP_rtems_irq_config->defaultEntry;
+
+  /*
+   * reenable interrupts
+   */
+  _CPU_ISR_Enable(level);
+
+  return 1;
+}
+
+/***********************************************************
+ * functions to set/get the basic interrupt management setup
+ ***********************************************************/
+/*
+ * (Re) get info on current RTEMS interrupt management.
+ */
+int BSP_rtems_irq_mngt_get(rtems_irq_global_settings** ret_ptr)
+{
+  *ret_ptr = BSP_rtems_irq_config;
+  return 0;
+}
+
+
+/*
+ * set management stuff
+ */
+int BSP_rtems_irq_mngt_set(rtems_irq_global_settings* config)
+{
+  int i;
+  unsigned int level;
+
+  _CPU_ISR_Disable(level);
+  /*
+   * store given configuration
+   */
+  BSP_rtems_irq_config = config;
+  BSP_rtems_irq_tbl    = BSP_rtems_irq_config->irqHdlTbl;
+  /*
+   * enable any non-empty IRQ entries at OPBINTC
+   */
+  for (i =  BSP_IPIC_IRQ_LOWEST_OFFSET;
+       i <= BSP_IPIC_IRQ_MAX_OFFSET;
+       i++) {
+    if (BSP_rtems_irq_tbl[i].hdl != config->defaultEntry.hdl) {
+      BSP_irq_enable_at_ipic(i);
+      BSP_rtems_irq_tbl[i].on((&BSP_rtems_irq_tbl[i]));
+    }
+    else {
+      BSP_rtems_irq_tbl[i].off(&(BSP_rtems_irq_tbl[i]));
+      BSP_irq_disable_at_ipic(i);
+    }
+  }
+  /*
+   * store any irq-like processor exceptions
+   */
+  for (i = BSP_PROCESSOR_IRQ_LOWEST_OFFSET; 
+       i < BSP_PROCESSOR_IRQ_MAX_OFFSET;
+       i++) {
+    if (BSP_rtems_irq_tbl[i].hdl != config->defaultEntry.hdl) {
+      if (BSP_rtems_irq_tbl[i].on != NULL) {
+	BSP_rtems_irq_tbl[i].on
+	  (&(BSP_rtems_irq_tbl[i]));
+      }
+    }
+    else {
+      if (BSP_rtems_irq_tbl[i].off != NULL) {
+	BSP_rtems_irq_tbl[i].off
+	  (&(BSP_rtems_irq_tbl[i]));
+      }
+    }
+  }
+  _CPU_ISR_Enable(level);
+  return 1;
+}
+/**********************************************
+ * list of exception vectors to tap for interrupt handlers
+ */
+static rtems_raw_except_connect_data BSP_vec_desc[] = {
+#if defined(ASM_DEC_VECTOR) 
+  {ASM_DEC_VECTOR,
+   {ASM_DEC_VECTOR,
+    decrementer_exception_vector_prolog_code,
+    (size_t)decrementer_exception_vector_prolog_code_size
+   },
+   exception_nop_enable,
+   exception_nop_enable,
+   exception_always_enabled
+  },
+#endif
+#if defined(ASM_SYSMGMT_VECTOR) 
+  {ASM_SYSMGMT_VECTOR,
+   {ASM_SYSMGMT_VECTOR,
+    sysmgmt_exception_vector_prolog_code,
+    (size_t)sysmgmt_exception_vector_prolog_code_size
+   },
+   exception_nop_enable,
+   exception_nop_enable,
+   exception_always_enabled
+  },
+#endif
+  {ASM_EXT_VECTOR,
+   {ASM_EXT_VECTOR,
+    external_exception_vector_prolog_code,
+    (size_t)&external_exception_vector_prolog_code_size
+   },
+   exception_nop_enable,
+   exception_nop_enable,
+   exception_always_enabled
+  }
+#if 0 /* Critical interrupts not yet supported */
+  ,{ASM_CRIT_VECTOR,
+   {ASM_CRIT_VECTOR,
+    critical_exception_vector_prolog_code,
+    critical_exception_vector_prolog_code_size
+   }
+   BSP_irq_nop_func,
+   BSP_irq_nop_func,
+   BSP_irq_true_func
+  }
+#endif
+};
+
+/*
+ * dummy for an empty IRQ handler entry
+ */ 
+static rtems_irq_connect_data emptyIrq = {
+  0, 		         /* Irq Name                 */
+  BSP_irq_nop_hdl,       /* handler function         */
+  NULL,                  /* handle passed to handler */
+  BSP_irq_nop_func,      /* on function              */
+  BSP_irq_nop_func,      /* off function             */
+  BSP_irq_true_func      /* isOn function            */
+};
+
+static rtems_irq_global_settings initialConfig = {
+  BSP_IRQ_NUMBER,    /* irqNb */
+  {  0, 		         /* Irq Name                 */
+     BSP_irq_nop_hdl,       /* handler function         */
+     NULL,                  /* handle passed to handler */
+     BSP_irq_nop_func,      /* on function              */
+     BSP_irq_nop_func,      /* off function             */
+     BSP_irq_true_func      /* isOn function            */
+  }, /* emptyIrq */
+  rtemsIrqTbl, /* irqHdlTbl  */
+  0,           /* irqBase    */
+  NULL         /* irqPrioTbl */
+};
+
+void BSP_rtems_irq_mng_init(unsigned cpuId)
+{
+  int i;
+  /*
+   * connect all exception vectors needed
+   */
+  for (i = 0;
+       i < (sizeof(BSP_vec_desc) / 
+	    sizeof(BSP_vec_desc[0]));
+       i++) {
+    if (!ppc_set_exception (&BSP_vec_desc[i])) {
+      BSP_panic("Unable to initialize RTEMS raw exception\n");
+    }
+  }
+  /*
+   * setup interrupt handlers table
+   */
+  for (i = 0;
+       i < BSP_IRQ_NUMBER;
+       i++) {
+    rtemsIrqTbl[i]      = emptyIrq;
+    rtemsIrqTbl[i].name = i;
+  }
+
+  /*
+   * initialize interrupt management
+   */
+  if (!BSP_rtems_irq_mngt_set(&initialConfig)) {
+    BSP_panic("Unable to initialize RTEMS interrupt Management!!! System locked\n");
+  }  
+}
+
--- a/c/src/lib/libbsp/powerpc/gen83xx/network/network.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/network/network.c
@@ -0,0 +1,103 @@
+/*===============================================================*\
+| Project: RTEMS support for MPC83xx                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the board specific portion                   |
+| of the network interface driver                                 |
+\*===============================================================*/
+
+#include <rtems.h>
+#include <rtems/rtems_bsdnet.h>
+#include <bsp.h>
+#include <mpc83xx/tsec.h>
+#include <mpc83xx/mpc83xx.h>
+#include <stdio.h>
+
+#define TSEC_BITRATE 1000
+#define TSEC_IFMODE_RGMII 0
+#define TSEC_IFMODE_GMII  1
+#define TSEC_IFMODE TSEC_IFMODE_RGMII
+
+/*=========================================================================*\
+| Function:                                                                 |
+\*-------------------------------------------------------------------------*/
+int BSP_tsec_attach
+(
+/*-------------------------------------------------------------------------*\
+| Purpose:                                                                  |
+|   attach or detach the driver                                             |
+---------------------------------------------------------------------------+
+| Input Parameters:                                                         |
+\*-------------------------------------------------------------------------*/
+ struct rtems_bsdnet_ifconfig *config, /* interface configuration          */
+ int attaching                         /* 0 = detach, else attach          */
+)
+/*-------------------------------------------------------------------------*\
+| Return Value:                                                             |
+|    1, if success                                                       |
+\*=========================================================================*/
+{
+  char hw_addr[6] = {0x00,0x04,0x9F,0x00,0x2f,0xcb};
+  int    unitNumber;
+  char   *unitName;
+
+  /*
+   * Parse driver name
+   */
+  if((unitNumber = rtems_bsdnet_parse_driver_name(config, &unitName)) < 0) {
+    return 0;
+  }
+  if (attaching) {
+    if (unitNumber == 1) {
+      /*
+       * init system I/O configuration registers 
+       * to ensure proper pin functions
+       */
+      mpc83xx.syscon.sicrh = mpc83xx.syscon.sicrh & ~0x1f800000;
+      /*
+       * init port registers (GPIO2DIR) for TSEC1
+       */
+      mpc83xx.gpio[1].gpdir = ((mpc83xx.gpio[1].gpdir & ~0x00000FFF)
+			       |                         0x0000001f);
+    }
+  }
+  if (unitNumber == 2) {
+    /*
+     * init port registers (GPIO2DIR) for TSEC2
+     */
+    mpc83xx.gpio[0].gpdir = ((mpc83xx.gpio[0].gpdir & ~0x000FFFFF)
+			     |                         0x00087881);
+  }
+  /*
+   * add MAC address into config->hardware_adderss
+   * FIXME: get the real address we need
+   */
+  if (config->hardware_address == NULL) {
+    config->hardware_address = hw_addr;
+  }
+  /*
+   * set interrupt number for given interface
+   */
+  config->irno = ((unitNumber == 1)
+		  ? BSP_IPIC_IRQ_TSEC1_TX
+		  : BSP_IPIC_IRQ_TSEC2_TX);
+  /*
+   * call attach function of board independent driver
+   */
+  if (0 == rtems_mpc83xx_tsec_driver_attach_detach(config,attaching)) {
+    return 0;
+  }
+  return 1;
+}
--- a/c/src/lib/libbsp/powerpc/gen83xx/preinstall.am
+++ b/c/src/lib/libbsp/powerpc/gen83xx/preinstall.am
@@ -0,0 +1,79 @@
+## Automatically generated by ampolish3 - Do not edit
+
+if AMPOLISH3
+$(srcdir)/preinstall.am: Makefile.am
+	$(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am
+endif
+
+PREINSTALL_DIRS =
+DISTCLEANFILES += $(PREINSTALL_DIRS)
+
+all-local: $(TMPINSTALL_FILES)
+
+TMPINSTALL_FILES =
+CLEANFILES = $(TMPINSTALL_FILES)
+
+all-am: $(PREINSTALL_FILES)
+
+PREINSTALL_FILES =
+CLEANFILES += $(PREINSTALL_FILES)
+
+$(PROJECT_LIB)/$(dirstamp):
+	@$(MKDIR_P) $(PROJECT_LIB)
+	@: > $(PROJECT_LIB)/$(dirstamp)
+PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
+
+$(PROJECT_INCLUDE)/$(dirstamp):
+	@$(MKDIR_P) $(PROJECT_INCLUDE)
+	@: > $(PROJECT_INCLUDE)/$(dirstamp)
+PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
+
+$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
+PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
+
+$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
+
+$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
+
+$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
+
+$(PROJECT_INCLUDE)/bsp/$(dirstamp):
+	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
+	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
+PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
+
+$(PROJECT_INCLUDE)/coverhd.h: include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
+
+$(PROJECT_INCLUDE)/tod.h: ../../shared/tod.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tod.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/tod.h
+
+$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
+TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
+
+$(PROJECT_LIB)/rtems_crti.$(OBJEXT): rtems_crti.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
+TMPINSTALL_FILES += $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
+
+$(PROJECT_LIB)/linkcmds.mpc8349eamds: startup/linkcmds.mpc8349eamds $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds.mpc8349eamds
+PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds.mpc8349eamds
+
+$(PROJECT_INCLUDE)/bsp/irq.h: ./irq/irq.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq.h
+
+$(PROJECT_INCLUDE)/bsp/vectors.h: ../../powerpc/shared/vectors/vectors.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/vectors.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/vectors.h
+
--- a/c/src/lib/libbsp/powerpc/gen83xx/start/start.S
+++ b/c/src/lib/libbsp/powerpc/gen83xx/start/start.S
@@ -0,0 +1,371 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the startup assembly code                    |
+\*===============================================================*/
+/* $Id$ */   
+
+#include <rtems/asm.h> 
+#include <rtems/powerpc/cache.h>
+#include <rtems/powerpc/registers.h>
+#include <mpc83xx/mpc83xx.h>
+#include <bsp.h>
+
+/* Macro definitions to load a register with a 32-bit address.
+   Both functions identically.  Sometimes one mnemonic is more
+   appropriate than the other.
+   reg 		-> register to load
+   value 	-> value to be loaded
+   LA  reg,value    ("Load Address")
+   LWI reg,value    ("Load Word Immediate") */
+
+.macro LA reg, value
+	lis \reg , \value@h
+	ori \reg , \reg, \value@l
+.endm
+
+.macro LWI reg, value
+	lis \reg , (\value)@h
+	ori \reg , \reg, (\value)@l
+.endm 
+
+.macro SET_IMM_REGW base, reg2, offset, value
+	LA \reg2, \value
+	stw \reg2,\offset(\base)
+.endm 
+
+/* Macro definitions to test, set or clear a single 
+   bit or bit pattern in a given 32bit GPR. 
+   reg1		-> register content to be tested
+   reg2		-> 2nd register only needed for computation
+   mask		-> any bit pattern */
+
+.macro	TSTBITS	reg1, reg2, reg3, mask	/* Match is indicated by EQ=0 (CR) */ 
+	LWI 	\reg3, \mask		/* Unmatch is indicated by EQ=1 (CR) */
+	and	\reg1, \reg1, \reg3
+	and	\reg2, \reg2, \reg3
+	cmplw	\reg1, \reg2
+	sync
+.endm	
+	
+.macro 	SETBITS reg1, reg2, mask
+	LWI 	\reg2, \mask
+	or	\reg1, \reg1, \reg2 
+	sync
+.endm
+
+.macro 	CLRBITS reg1, reg2, mask
+	LWI 	\reg2, \mask
+	andc	\reg1, \reg1, \reg2
+	sync
+.endm
+
+.extern	_bss_start
+.extern	_bss_size
+.extern	_data_start
+.extern	_data_size
+.extern	_text_start
+.extern	_text_size
+/*.extern _s_got*/
+.extern boot_card
+.extern MBAR   
+
+.section ".vectors"  
+PUBLIC_VAR (reset_vec)
+reset_vec:	
+	bl start
+.section ".entry"  
+PUBLIC_VAR (start)
+start:
+	/*
+	 * FIXME: basic CPU setup:	
+	 *        init MSR
+	 */
+	mfmsr	r30
+	SETBITS r30, r29, MSR_ME|MSR_RI
+	CLRBITS r30, r29, MSR_IP|MSR_EE
+	mtmsr	r30 				/* Set RI/ME, Clr EE in MSR */
+	/*
+	 * check, wether we are starting from ROM 
+	 * detect this using the absolute code address:
+	 * when the upper 4 bits are 0xF, then we are in ROM
+	 */
+	bl 1f
+1:	mflr r28
+	LWI  r29,0xF0000000
+	TSTBITS r28,r29,r30,0xF0000000
+	bne start_rom_skip
+	/*
+	 * ROM startup: remap IMMR to 0xE0000000
+	 * use special sequence from MPC8349EA RM Rev 1, 5.2.4.1.1 "Updating IMMRBAR"
+	 */
+	LWI  r30,IMMRBAR_DEFAULT
+	LWI  r31,IMMRBAR
+	lwz  r29,0(r30)
+	stw  r31,0(r30)
+	lwz  r29,0(r28) /* read from ROM... */
+	isync
+	lwz  r29,0(r31) /* read from IMMRBAR... */
+	isync
+	/*
+	 * NOTE:	 now r31 points to onchip registers
+	
+	/*
+	 * ROM startup: init local access windows
+	 */
+#ifdef LBLAWBAR0_VAL
+	SET_IMM_REGW r31,r30,LBLAWBAR0_OFF,LBLAWBAR0_VAL
+#endif
+#ifdef LBLAWAR0_VAL
+	SET_IMM_REGW r31,r30,LBLAWAR0_OFF,LBLAWAR0_VAL
+#endif
+#ifdef LBLAWBAR1_VAL
+	SET_IMM_REGW r31,r30,LBLAWBAR1_OFF,LBLAWBAR1_VAL
+#endif
+#ifdef LBLAWAR1_VAL
+	SET_IMM_REGW r31,r30,LBLAWAR1_OFF,LBLAWAR1_VAL
+#endif
+#ifdef LBLAWBAR2_VAL
+	SET_IMM_REGW r31,r30,LBLAWBAR2_OFF,LBLAWBAR2_VAL
+#endif
+#ifdef LBLAWAR2_VAL
+	SET_IMM_REGW r31,r30,LBLAWAR2_OFF,LBLAWAR2_VAL
+#endif
+#ifdef LBLAWBAR3_VAL
+	SET_IMM_REGW r31,r30,LBLAWBAR3_OFF,LBLAWBAR3_VAL
+#endif
+#ifdef LBLAWAR3_VAL
+	SET_IMM_REGW r31,r30,LBLAWAR3_OFF,LBLAWAR3_VAL
+#endif
+	/*
+	 * ROM startup: init bus system
+	 */
+#ifdef BR0_VAL
+	SET_IMM_REGW r31,r30,BR0_OFF,BR0_VAL
+#endif
+#ifdef OR0_VAL
+	SET_IMM_REGW r31,r30,OR0_OFF,OR0_VAL
+#endif
+#ifdef BR1_VAL
+	SET_IMM_REGW r31,r30,BR1_OFF,BR1_VAL
+#endif
+#ifdef OR1_VAL
+	SET_IMM_REGW r31,r30,OR1_OFF,OR1_VAL
+#endif
+#ifdef BR2_VAL
+	SET_IMM_REGW r31,r30,BR2_OFF,BR2_VAL
+#endif
+#ifdef OR2_VAL
+	SET_IMM_REGW r31,r30,OR2_OFF,OR2_VAL
+#endif
+#ifdef BR3_VAL
+	SET_IMM_REGW r31,r30,BR3_OFF,BR3_VAL
+#endif
+#ifdef OR3_VAL
+	SET_IMM_REGW r31,r30,OR3_OFF,OR3_VAL
+#endif
+	/*
+	 * ROM startup: init SDRAM access window
+	 */
+#ifdef DDRLAWBAR0_VAL
+	SET_IMM_REGW r31,r30,DDRLAWBAR0_OFF,DDRLAWBAR0_VAL
+#endif
+#ifdef DDRLAWAR0_VAL
+	SET_IMM_REGW r31,r30,DDRLAWAR0_OFF,DDRLAWAR0_VAL
+#endif
+#ifdef DDRLAWBAR1_VAL
+	SET_IMM_REGW r31,r30,DDRLAWBAR1_OFF,DDRLAWBAR1_VAL
+#endif
+#ifdef DDRLAWAR1_VAL
+	SET_IMM_REGW r31,r30,DDRLAWAR1_OFF,DDRLAWAR1_VAL
+#endif
+	/*
+	 * ROM startup: init SDRAM
+	 */
+#ifdef CS0_BNDS_VAL
+	SET_IMM_REGW r31,r30,CS0_BNDS_OFF,CS0_BNDS_VAL
+#endif
+#ifdef CS1_BNDS_VAL
+	SET_IMM_REGW r31,r30,CS1_BNDS_OFF,CS1_BNDS_VAL
+#endif
+#ifdef CS2_BNDS_VAL
+	SET_IMM_REGW r31,r30,CS2_BNDS_OFF,CS2_BNDS_VAL
+#endif
+#ifdef CS3_BNDS_VAL
+	SET_IMM_REGW r31,r30,CS3_BNDS_OFF,CS3_BNDS_VAL
+#endif
+#ifdef CS0_CONFIG_VAL
+	SET_IMM_REGW r31,r30,CS0_CONFIG_OFF,CS0_CONFIG_VAL
+#endif
+#ifdef CS1_CONFIG_VAL
+	SET_IMM_REGW r31,r30,CS1_CONFIG_OFF,CS1_CONFIG_VAL
+#endif
+#ifdef CS2_CONFIG_VAL
+	SET_IMM_REGW r31,r30,CS2_CONFIG_OFF,CS2_CONFIG_VAL
+#endif
+#ifdef CS3_CONFIG_VAL
+	SET_IMM_REGW r31,r30,CS3_CONFIG_OFF,CS3_CONFIG_VAL
+#endif
+#ifdef TIMING_CFG_3_VAL
+	SET_IMM_REGW r31,r30,TIMING_CFG_3_OFF,TIMING_CFG_3_VAL
+#endif
+#ifdef TIMING_CFG_0_VAL
+	SET_IMM_REGW r31,r30,TIMING_CFG_0_OFF,TIMING_CFG_0_VAL
+#endif
+#ifdef TIMING_CFG_1_VAL
+	SET_IMM_REGW r31,r30,TIMING_CFG_1_OFF,TIMING_CFG_1_VAL
+#endif
+#ifdef TIMING_CFG_2_VAL
+	SET_IMM_REGW r31,r30,TIMING_CFG_2_OFF,TIMING_CFG_2_VAL
+#endif
+#ifdef DDR_SDRAM_CFG_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_CFG_OFF,DDR_SDRAM_CFG_VAL
+#endif
+#ifdef DDR_SDRAM_CFG_2_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_CFG_2_OFF,DDR_SDRAM_CFG_2_VAL
+#endif
+#ifdef DDR_SDRAM_MODE_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_MODE_OFF,DDR_SDRAM_MODE_VAL
+#endif
+#ifdef DDR_SDRAM_MODE_2_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_MODE_2_OFF,DDR_SDRAM_MODE_2_VAL
+#endif
+#ifdef DDR_SDRAM_MD_CNTL_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_MD_CNTL_OFF,DDR_SDRAM_MD_CNTL_VAL
+#endif
+#ifdef DDR_SDRAM_MD_ITVL_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_MD_ITVL_OFF,DDR_SDRAM_MD_ITVL_VAL
+#endif
+#ifdef DDR_SDRAM_CLK_CNTL_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_CLK_CNTL_OFF,DDR_SDRAM_CLK_CNTL_VAL
+#endif
+#ifdef DDR_SDRAM_INIT_ADDR_VAL
+	SET_IMM_REGW r31,r30,DDR_SDRAM_INIT_ADDR_OFF,DDR_SDRAM_INIT_ADDR_VAL
+#endif
+	/*
+	 * FIXME: ROM startup: perform mode set commands etc for SDRAM
+	 */
+	/*
+	 * ROM startup: copy code to SDRAM
+	 */
+	LA	r30, _text_start  /* get start address of text section in RAM */
+	add	r30, r20, r30    /* get start address of text section in ROM (add reloc offset) */
+	LA	r29, _text_start /* get start address of text section in RAM */
+	LA	r28, _text_size  /* get size of RAM image */
+	bl	copy_image      /* copy text section from ROM to RAM location */
+	
+	/*
+	 * FIXME: ROM startup: copy data to SDRAM
+	 */
+	LA	r30, _data_start /* get start address of data section in RAM */
+	add	r30, r20, r30    /* get start address of data section in ROM (add reloc offset) */
+	LA	r29, _data_start /* get start address of data section in RAM */
+	LA	r28, _data_size  /* get size of RAM image */
+	bl	copy_image       /* copy initialized data section from ROM to RAM location */
+start_rom_skip:	
+	/*
+	 * ROM startup: clear bss in SDRAM
+	 */
+	LWI	r30, _bss_start  /* get start address of bss section */
+        LWI	r29, _bss_size   /* get size of bss section */
+        bl      clr_mem          /* Clear the bss section */
+	/*
+	 * ROM startup: jump to code copy in  SDRAM
+	 */
+	LA	r29, start_code_in_ram /* get compile time address of label */
+	mtlr	r29
+	blr                     /* now further execution RAM */
+start_code_in_ram:	
+	/*
+	 * call boot_card
+	 */
+/* set stack pointer (common for RAM/ROM startup) */
+	LA	r1, _text_start  
+        addi    r1, r1, -0x10 /* Set up stack pointer = beginning of text section - 0x10 */     
+/* clear arguments and do further init. in C (common for RAM/ROM startup) */
+        xor     r3, r3, r3
+        xor     r4, r4, r4       /* Clear argc and argv */        
+        bl      SYM (boot_card)  /* Call the first C routine */
+	
+twiddle:
+	/* We don't expect to return from boot_card but if we do */
+	/* wait here for watchdog to kick us into hard reset     */
+	b	twiddle          
+						
+copy_image:
+	mr	r27, r28
+	srwi	r28, r28, 2
+	mtctr	r28
+
+	slwi	r28, r28, 2
+	sub     r27, r27, r28			/* maybe some residual bytes */
+copy_image_word:
+	lswi	r28, r30, 0x04
+	
+	stswi   r28, r29, 0x04			/* do word copy ROM -> RAM */
+	
+
+	addi    r30, r30, 0x04			/* increment source pointer */
+	addi    r29, r29, 0x04			/* increment destination pointer */
+	
+	bdnz	copy_image_word			/* decrement ctr and branch if not 0 */
+
+	cmpwi	r27, 0x00			/* copy image finished ? */
+	beq	copy_image_end;
+	mtctr   r27				/* reload counter for residual bytes */
+copy_image_byte:
+	lswi	r28, r30, 0x01
+	
+	stswi   r28, r29, 0x01			/* do byte copy ROM -> RAM */
+	
+	
+	addi    r30, r30, 0x01			/* increment source pointer */
+	addi    r29, r29, 0x01			/* increment destination pointer */
+	
+	bdnz	copy_image_byte			/* decrement ctr and branch if not 0 */
+	
+copy_image_end:
+	blr
+
+clr_mem:
+	mr 	r28, r29		
+	srwi	r29, r29, 2
+        mtctr   r29				/* set ctr reg */
+        
+        
+        slwi	r29, r29, 2
+        sub     r28, r28, r29			/* maybe some residual bytes */
+        xor     r29, r29, r29		
+	
+	
+clr_mem_word:
+        stswi   r29, r30, 0x04			/* store r29 (word) to r30 memory location */
+        addi    r30, r30, 0x04			/* increment r30 */
+        
+        bdnz    clr_mem_word			/* dec counter and loop */
+	
+	
+	cmpwi	r28, 0x00			/* clear mem. finished ? */
+	beq	clr_mem_end;
+        mtctr   r28				/* reload counter for residual bytes */
+clr_mem_byte:
+	stswi   r29, r30, 0x01			/* store r29 (byte) to r30 memory location  */
+	addi    r30, r30, 0x01			/* update r30 */
+        
+        bdnz    clr_mem_byte			/* dec counter and loop */
+        
+clr_mem_end:
+        blr					/* return */
--- a/c/src/lib/libbsp/powerpc/gen83xx/startup/bspstart.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/startup/bspstart.c
@@ -0,0 +1,267 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the BSP startup code                         |
+\*===============================================================*/
+
+#include <bsp.h>
+
+#include <rtems/libio.h>
+#include <rtems/libcsupport.h>
+#include <rtems/powerpc/powerpc.h>
+#include <rtems/score/thread.h>
+
+#include <rtems/bspIo.h>
+#include <libcpu/cpuIdent.h>
+#include <libcpu/spr.h>
+#include <bsp/irq.h>
+
+#include <string.h>
+
+SPR_RW(SPRG0)
+SPR_RW(SPRG1)
+
+/*
+ *  The original table from the application (in ROM) and our copy of it with
+ *  some changes. Configuration is defined in <confdefs.h>. Make sure that
+ *  our configuration tables are uninitialized so that they get allocated in
+ *  the .bss section (RAM).
+ */
+extern rtems_configuration_table Configuration;
+extern unsigned long intrStackPtr;
+rtems_configuration_table  BSP_Configuration;
+static char *BSP_heap_start, *BSP_heap_end;
+rtems_cpu_table Cpu_table;
+char *rtems_progname;
+
+/*
+ * constants for c_clock driver:
+ * system bus frequency (for timebase etc)
+ * and 
+ * Time base divisior: scaling value:
+ * BSP_time_base_divisor = TB ticks per millisecond/BSP_bus_frequency
+ */
+unsigned int BSP_bus_frequency = BSP_CSB_CLK_FRQ;
+unsigned int BSP_time_base_divisor = 4000;  /* 4 bus clicks per TB click */
+
+/*
+ *  Use the shared implementations of the following routines.
+ *  Look in rtems/c/src/lib/libbsp/shared/bsppost.c and
+ *  rtems/c/src/lib/libbsp/shared/bsplibc.c.
+ */
+void bsp_postdriver_hook(void);
+void bsp_libc_init( void *, uint32_t, int );
+extern void initialize_exceptions(void);
+extern void cpu_init(void);
+
+void BSP_panic(char *s)
+  {
+  printk("%s PANIC %s\n",_RTEMS_version, s);
+  /*
+   * FIXME: hang/restart system
+   */
+  __asm__ __volatile ("sc");
+  }
+
+void _BSP_Fatal_error(unsigned int v)
+  {
+  printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
+  /*
+   * FIXME: hang/restart system
+   */
+  __asm__ __volatile ("sc");
+  }
+
+/*
+ *  Function:   bsp_pretasking_hook
+ *  Created:    95/03/10
+ *
+ *  Description:
+ *      BSP pretasking hook.  Called just before drivers are initialized.
+ *      Used to setup libc and install any BSP extensions.
+ *
+ *  NOTES:
+ *      Must not use libc (to do io) from here, since drivers are
+ *      not yet initialized.
+ *
+ */
+
+void
+bsp_pretasking_hook(void)
+{
+
+  /*
+   * initialize libc including the heap
+   */
+  bsp_libc_init( BSP_heap_start, 
+		 BSP_heap_end - BSP_heap_start,
+		 0);
+
+
+#ifdef STACK_CHECKER_ON
+  /*
+   *  Initialize the stack bounds checker
+   *  We can either turn it on here or from the app.
+   */
+
+  Stack_check_Initialize();
+#endif
+
+#ifdef RTEMS_DEBUG
+  rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
+#endif
+}
+
+
+
+void bsp_predriver_hook(void)
+{
+}
+
+void bsp_calc_mem_layout()
+{
+  /*
+   * these labels (!) are defined in the linker command file
+   * or when the linker is invoked
+   * NOTE: the information(size) is the address of the object,
+   * not the object otself
+   */
+  extern unsigned char TopRamReserved;
+  extern unsigned char _WorkspaceBase;
+
+  /*
+   * compute the memory layout:
+   * - first unused address is Workspace start
+   * - Heap starts at end of workspace
+   * - Heap ends at end of memory - reserved memory area
+   */
+  BSP_Configuration.work_space_start = &_WorkspaceBase;
+
+  BSP_heap_start = ((char *)BSP_Configuration.work_space_start +
+                    BSP_Configuration.work_space_size);
+
+#if defined(HAS_UBOOT)
+  BSP_heap_end = (uboot_bdinfo_ptr->bi_memstart 
+		  + uboot_bdinfo_ptr->bi_memsize
+		  - (uint32_t)&TopRamReserved);
+#else
+  BSP_heap_end = (void *)(RAM_END - (uint32_t)&TopRamReserved);
+#endif
+
+}
+
+
+void bsp_start(void)
+{
+  ppc_cpu_id_t myCpu;
+  ppc_cpu_revision_t myCpuRevision;
+  register unsigned char* intrStack;
+
+  /*
+   * Get CPU identification dynamically. Note that the get_ppc_cpu_type() function
+   * store the result in global variables so that it can be used latter...
+   */
+  myCpu 	    = get_ppc_cpu_type();
+  myCpuRevision = get_ppc_cpu_revision();
+  /*
+   * determine heap and workspace placement
+   */
+  bsp_calc_mem_layout();
+
+  cpu_init();
+
+  /*
+   * Initialize some SPRG registers related to irq handling
+   */
+
+  intrStack = (((unsigned char*)&intrStackPtr) - PPC_MINIMUM_STACK_FRAME_SIZE);
+
+  _write_SPRG1((unsigned int)intrStack);
+
+  /* Signal them that this BSP has fixed PR288 - eventually, this should go away */
+  _write_SPRG0(PPC_BSP_HAS_FIXED_PR288);
+
+  /*
+   *  initialize the CPU table for this BSP
+   */
+
+  Cpu_table.pretasking_hook        = bsp_pretasking_hook;    /* init libc, etc. */
+  Cpu_table.predriver_hook         = bsp_predriver_hook;     /* init PCI / RTC ...   */
+  Cpu_table.postdriver_hook        = bsp_postdriver_hook;
+  Cpu_table.clicks_per_usec        = (BSP_CSB_CLK_FRQ/1000000);
+  Cpu_table.exceptions_in_RAM      = TRUE;
+
+  if( Cpu_table.interrupt_stack_size < 4*1024 )
+    Cpu_table.interrupt_stack_size = 4 * 1024;
+
+ /*
+  * Install our own set of exception vectors
+  */
+
+  initialize_exceptions();
+
+  /*
+   * Enable instruction and data caches. Do not force writethrough mode.
+   */
+#if INSTRUCTION_CACHE_ENABLE
+  rtems_cache_enable_instruction();
+#endif
+#if DATA_CACHE_ENABLE
+  rtems_cache_enable_data();
+#endif
+
+  /*
+   *  Allocate the memory for the RTEMS Work Space.  This can come from
+   *  a variety of places: hard coded address, malloc'ed from outside
+   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
+   *  typically done by stock BSPs) by subtracting the required amount
+   *  of work space from the last physical address on the CPU board.
+   */
+
+  /*
+   * Initalize RTEMS IRQ system
+   */
+  BSP_rtems_irq_mng_init(0);
+
+#ifdef SHOW_MORE_INIT_SETTINGS
+  printk("Exit from bspstart\n");
+#endif
+
+  }
+
+/*
+ *
+ *  _Thread_Idle_body
+ *
+ *  Replaces the one in c/src/exec/score/src/threadidlebody.c
+ *  The MSR[POW] bit is set to put the CPU into the low power mode
+ *  defined in HID0.  HID0 is set during starup in start.S.
+ *
+ */
+Thread _Thread_Idle_body(uint32_t ignored )
+  {
+
+  for(;;)
+    {
+
+    asm volatile("mfmsr 3; oris 3,3,4; sync; mtmsr 3; isync; ori 3,3,0; ori 3,3,0");
+
+    }
+
+  return 0;
+
+  }
+
--- a/c/src/lib/libbsp/powerpc/gen83xx/startup/cpuinit.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/startup/cpuinit.c
@@ -0,0 +1,216 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+| Partially based on the code references which are named below.   |
+| Adaptions, modifications, enhancements and any recent parts of  |
+| the code are:                                                   |
+|                    Copyright (c) 2005                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file contains the code to initialize the cpu               |
+\*===============================================================*/
+/***********************************************************************/
+/*                                                                     */
+/*   Module:       cpuinit.c                                           */
+/*   Date:         07/17/2003                                          */
+/*   Purpose:      RTEMS MPC5x00 C level startup code                  */
+/*                                                                     */
+/*---------------------------------------------------------------------*/
+/*                                                                     */
+/*   Description:  This file contains additional functions for         */
+/*                 initializing the MPC5x00 CPU                        */
+/*                                                                     */
+/*---------------------------------------------------------------------*/
+/*                                                                     */
+/*   Code                                                              */
+/*   References:   MPC8260ads additional CPU initialization            */
+/*   Module:       cpuinit.c                                           */
+/*   Project:      RTEMS 4.6.0pre1 / MCF8260ads BSP                    */
+/*   Version       1.1                                                 */
+/*   Date:         10/22/2002                                          */
+/*                                                                     */
+/*   Author(s) / Copyright(s):                                         */
+/*                                                                     */
+/*   Written by Jay Monkman (jmonkman@frasca.com)                      */
+/*                                                                     */
+/*---------------------------------------------------------------------*/
+/*                                                                     */
+/*   Partially based on the code references which are named above.     */
+/*   Adaptions, modifications, enhancements and any recent parts of    */
+/*   the code are under the right of                                   */
+/*                                                                     */
+/*         IPR Engineering, Dachauer Straße 38, D-80335 München        */
+/*                        Copyright(C) 2003                            */
+/*                                                                     */
+/*---------------------------------------------------------------------*/
+/*                                                                     */
+/*   IPR Engineering makes no representation or warranties with        */
+/*   respect to the performance of this computer program, and          */
+/*   specifically disclaims any responsibility for any damages,        */
+/*   special or consequential, connected with the use of this program. */
+/*                                                                     */
+/*---------------------------------------------------------------------*/
+/*                                                                     */
+/*   Version history:  1.0                                             */
+/*                                                                     */
+/***********************************************************************/
+
+#include <bsp.h>
+#include <rtems/powerpc/registers.h>
+#include <mpc83xx/mpc83xx.h>
+
+#include <libcpu/mmu.h>
+#include <libcpu/spr.h>
+#include <string.h>
+
+#define USE_IMMU
+
+/* Macros for HID0 access */
+#define SET_HID0(r)   __asm__ volatile ("mtspr 0x3F0,%0\n" ::"r"(r))
+#define GET_HID0(r)   __asm__ volatile ("mfspr %0,0x3F0\n" :"=r"(r))
+
+#define DBAT_MTSPR(val,name) __MTSPR(val,name);
+#define SET_DBAT(n,uv,lv) {DBAT_MTSPR(lv,DBAT##n##L);DBAT_MTSPR(uv,DBAT##n##U);}
+#if defined(USE_IMMU )
+#define IBAT_MTSPR(val,name) __MTSPR(val,name);
+#define SET_IBAT(n,uv,lv) {IBAT_MTSPR(lv,IBAT##n##L);IBAT_MTSPR(uv,IBAT##n##U);}
+#endif
+
+void calc_dbat_regvals(BAT *bat_ptr,
+		       uint32_t base_addr,
+		       uint32_t size,
+		       boolean flg_w,
+		       boolean flg_i,
+		       boolean flg_m,
+		       boolean flg_g,
+		       boolean flg_bpp)
+{
+  uint32_t block_mask;
+  uint32_t end_addr;
+
+  /*
+   * determine block mask, that overlaps the whole block
+   */
+  end_addr = base_addr+size-1;
+  block_mask = ~0;
+  while ((end_addr & block_mask) != (base_addr & block_mask)) {
+    block_mask <<= 1;
+  }
+  
+  bat_ptr->batu.bepi  = base_addr  >> (32-15); 
+  bat_ptr->batu.bl    = ~(block_mask >> (28-11));
+  bat_ptr->batu.vs    = 1;
+  bat_ptr->batu.vp    = 1;
+  
+  bat_ptr->batl.brpn  = base_addr  >> (32-15); 
+  bat_ptr->batl.w  = flg_w; 
+  bat_ptr->batl.i  = flg_i; 
+  bat_ptr->batl.m  = flg_m; 
+  bat_ptr->batl.g  = flg_g; 
+  bat_ptr->batl.pp = flg_bpp; 
+}
+
+void clear_mmu_regs(void)
+{
+  uint32_t i;
+  /*
+   * clear segment registers
+   */
+  for (i = 0;i < 16;i++) {
+    asm volatile(" mtsrin	%0, %1\n"::"r" (i * 0x1000),"r"(i<<(31-3)));
+  }
+  /*
+   * clear TLBs
+   */
+  for (i = 0;i < 32;i++) {
+    asm volatile(" tlbie	%0\n"::"r" (i << (31-19)));
+  }
+}
+
+void cpu_init(void)
+{
+  register unsigned long reg;
+  BAT dbat,ibat;
+
+  /*
+   * clear MMU/Segment registers
+   */
+  clear_mmu_regs();
+  /*
+   * clear caches
+   */
+  GET_HID0(reg);
+  reg |=  (HID0_ICFI | HID0_DCI);
+  SET_HID0(reg);
+  reg &= ~(HID0_ICFI | HID0_DCI);
+  SET_HID0(reg);
+  
+  /*
+   * set up IBAT registers in MMU
+   */
+  memset(&ibat,0,sizeof(ibat));
+  SET_IBAT(2,ibat.batu,ibat.batl);
+  SET_IBAT(3,ibat.batu,ibat.batl);
+  SET_IBAT(4,ibat.batu,ibat.batl);
+  SET_IBAT(5,ibat.batu,ibat.batl);
+  SET_IBAT(6,ibat.batu,ibat.batl);
+  SET_IBAT(7,ibat.batu,ibat.batl);
+
+  calc_dbat_regvals(&ibat,RAM_START,RAM_SIZE,0,0,0,0,BPP_RX);
+  SET_IBAT(0,ibat.batu,ibat.batl);
+  calc_dbat_regvals(&ibat,ROM_START,ROM_SIZE,0,0,0,0,BPP_RX);
+  SET_IBAT(1,ibat.batu,ibat.batl);
+
+  /*
+   * set up DBAT registers in MMU
+   */
+  memset(&dbat,0,sizeof(dbat));
+  SET_DBAT(3,dbat.batu,dbat.batl);
+  SET_DBAT(4,dbat.batu,dbat.batl);
+  SET_DBAT(5,dbat.batu,dbat.batl);
+  SET_DBAT(6,dbat.batu,dbat.batl);
+  SET_DBAT(7,dbat.batu,dbat.batl);
+
+  calc_dbat_regvals(&dbat,RAM_START,RAM_SIZE,1,0,1,0,BPP_RW);
+  SET_DBAT(0,dbat.batu,dbat.batl);
+
+  calc_dbat_regvals(&dbat,ROM_START,ROM_SIZE,1,0,1,0,BPP_RX);
+  SET_DBAT(1,dbat.batu,dbat.batl);
+
+  calc_dbat_regvals(&dbat,IMMRBAR,1024*1024,1,1,1,1,BPP_RW);
+  SET_DBAT(2,dbat.batu,dbat.batl);
+
+  /*
+   * enable data/instruction MMU in MSR
+   */
+  _write_MSR(_read_MSR() | MSR_DR/* | MSR_IR*/);
+
+  /*
+   * enable FPU in MSR
+   */
+  _write_MSR(_read_MSR() | MSR_FP);
+
+  /*
+   * in HID0: 
+   * - enable dynamic power management
+   * - enable machine check interrupts
+   */
+  GET_HID0(reg);
+  reg |=  (HID0_EMCP | HID0_DPM) ;
+  SET_HID0(reg);
+
+  /*
+   * enable timebase clock 
+   */
+  mpc83xx.syscon.spcr |= M83xx_SYSCON_SPCR_TBEN;
+}
--- a/c/src/lib/libbsp/powerpc/gen83xx/startup/linkcmds.mpc8349eamds
+++ b/c/src/lib/libbsp/powerpc/gen83xx/startup/linkcmds.mpc8349eamds
@@ -0,0 +1,324 @@
+/*
+ *  This file contains directives for the GNU linker which are specific
+ *  to a gen8349eamds board
+ *
+ *  linkcmds,v 1.3 2003/01/20 19:53:27 joel Exp
+ */
+
+OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc",
+              "elf32-powerpc")
+OUTPUT_ARCH(powerpc)
+ 
+ENTRY(start)
+
+/*
+ * Declare some sizes.
+ * XXX: The assignment of ". += XyzSize;" fails in older gld's if the
+ *      number used there is not constant.  If this happens to you, edit
+ *      the lines marked XXX below to use a constant value.
+ */
+HeapSize = DEFINED(HeapSize) ? HeapSize    : 0x6800000;  /* 104M  Heap */
+StackSize = DEFINED(StackSize) ? StackSize :   0x80000;  /* 512 kB   */
+WorkSpaceSize = DEFINED(WorkSpaceSize) ? WorkSpaceSize : 0x80000; /* 512k */
+RamDiskSize = DEFINED(RamDiskSize) ? RamDiskSize : 0x80000; /* 512 ram disk */
+
+/* 
+ * optionally reserve additional space 
+ */
+TopRamReserved = DEFINED(TopRamReserved) ? TopRamReserved : 0;
+ 
+MEMORY
+	{
+	ram          : org = 0x0,        l = 256M
+	mpc83xx_regs : org = 0xE0000000, l = 256k
+	}
+
+
+SECTIONS
+{
+
+    mpc83xx_regs (NOLOAD) :
+    { 
+    IMMRBAR = .;
+    *mpc83xx_regs*(*)
+    } > mpc83xx_regs
+
+   .vectors 0x100 :
+    {
+    *(.vectors)
+    }   
+    > ram
+
+    /* 
+     * The stack will live in this area - between the vectors and
+     * the text section.
+     */
+	
+    .text 0x10000:
+    {
+    _textbase = .;
+
+
+    text.start = .;
+
+    /* Entry point is the .entry section */
+    *(.entry)
+    *(.entry2)
+
+    /* Actual Code */
+    *(.text*)
+
+    *(.rodata*)
+    *(.rodata1)
+
+
+    /*
+     * Special FreeBSD sysctl sections.
+     */
+    . = ALIGN (16);
+    __start_set_sysctl_set = .;
+    *(set_sysctl_*);
+    __stop_set_sysctl_set = ABSOLUTE(.);
+    *(set_domain_*);
+    *(set_pseudo_*);
+
+    /* C++ constructors/destructors */
+    *(.gnu.linkonce.t*)
+
+    /*  Initialization and finalization code.
+     *
+     *  Various files can provide initialization and finalization functions.
+     *  The bodies of these functions are in .init and .fini sections. We
+     *  accumulate the bodies here, and prepend function prologues from
+     *  ecrti.o and function epilogues from ecrtn.o. ecrti.o must be linked
+     *  first; ecrtn.o must be linked last. Because these are wildcards, it
+     *  doesn't matter if the user does not actually link against ecrti.o and
+     *  ecrtn.o; the linker won't look for a file to match a wildcard.  The
+     *  wildcard also means that it doesn't matter which directory ecrti.o
+     *  and ecrtn.o are in. 
+     */
+    PROVIDE (_init = .);
+    *ecrti.o(.init)
+    *(.init)
+    *ecrtn.o(.init)
+    
+    PROVIDE (_fini = .);
+    *ecrti.o(.fini)
+    *(.fini)
+    *ecrtn.o(.init)
+
+    /* 
+     *  C++ constructors and destructors for static objects.
+     *  PowerPC EABI does not use crtstuff yet, so we build "old-style"
+     *  constructor and destructor lists that begin with the list lenght
+     *  end terminate with a NULL entry.
+     */
+     
+    PROVIDE (__CTOR_LIST__ = .);	     
+    *crtbegin.o(.ctors)
+    *(.ctors)
+    *crtend.o(.ctors)
+    LONG(0)
+    PROVIDE (__CTOR_END__ = .);
+	
+    PROVIDE (__DTOR_LIST__ = .);
+    *crtbegin.o(.dtors)
+    *(.dtors)
+    *crtend.o(.dtors)
+    LONG(0)
+    PROVIDE (__DTOR_END__ = .);
+	
+    /* Exception frame info */
+    *(.eh_frame)
+
+    /* Miscellaneous read-only data */
+    _rodata_start = . ;
+    *(.gnu.linkonce.r*)
+    *(.lit)
+    *(.shdata)
+    *(.rodata)
+    *(.rodata1)
+    *(.descriptors)
+    *(rom_ver)
+    _erodata = .;
+
+    PROVIDE (__EXCEPT_START__ = .);
+    *(.gcc_except_table)
+    PROVIDE (__EXCEPT_END__ = .);
+    __GOT_START__ = .;
+    s.got = .;
+    *(.got.plt) 
+    *(.got)
+    *(.got1)
+    PROVIDE (__GOT2_START__ = .);
+    PROVIDE (_GOT2_START_ = .);
+    *(.got2)
+    PROVIDE (__GOT2_END__ = .);
+    PROVIDE (_GOT2_END_ = .);
+    
+    PROVIDE (__FIXUP_START__ = .);
+    PROVIDE (_FIXUP_START_ = .);
+    *(.fixup)
+    PROVIDE (_FIXUP_END_ = .);
+    PROVIDE (__FIXUP_END__ = .);
+    
+
+    /* Various possible names for the end of the .text section */
+    etext = ALIGN(0x10);
+    _etext = .;
+    _endtext = .;
+    text.end = .;
+    PROVIDE (etext = .);
+    PROVIDE (__etext = .);
+ 
+    } > ram
+
+  .jcr : { KEEP (*(.jcr)) } > ram
+
+    .rel.dyn : {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
+      *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
+      *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
+      *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+    } >ram
+    .rela.dyn : {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.got1)
+      *(.rela.got2)
+      *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
+      *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
+      *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
+      *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+    } >ram
+
+    PROVIDE (__SDATA2_START__ = .);
+  .sdata2   	  : { *(.sdata2) *(.gnu.linkonce.s2.*)	} >ram
+  .sbss2   	  : { *(.sbss2) *(.gnu.linkonce.sb2.*)	} >ram
+    PROVIDE (__SBSS2_END__ = .);
+	
+    .sbss2   	  : { *(.sbss2) 	} >ram
+    PROVIDE (__SBSS2_END__ = .);
+	
+    /* R/W Data */
+    .data ( . ) :
+    {
+      . = ALIGN (4);
+
+      data.start = .;
+
+      *(.data)
+      *(.data1)
+      *(.data.* .gnu.linkonce.d.*)
+      PROVIDE (__SDATA_START__ = .);
+      *(.sdata*)
+      *(.gnu.linkonce.s.*)
+      data.end = .;
+    } > ram
+
+    __SBSS_START__ = .;
+    .bss :
+    {
+      bss.start = .;
+      *(.bss .bss* .gnu.linkonce.b*)
+      *(.sbss*) *(COMMON)
+      . = ALIGN(4);
+      bss.end = .;
+    } > ram
+    __SBSS_END__ = .;
+
+    PROVIDE(_bss_start   = ADDR(.bss));
+    PROVIDE(_bss_size    = SIZEOF(.bss));
+    PROVIDE(_data_start  = ADDR(.data));
+    PROVIDE(_data_size   = SIZEOF(.data));
+    PROVIDE(_text_start  = ADDR(.text));
+    PROVIDE(_text_size   = SIZEOF(.text));
+    PROVIDE(_end = data.end);
+
+    .gzipmalloc : {
+	. = ALIGN (16);
+        _startmalloc = .;
+     } >ram
+          	
+
+    /*
+     * Interrupt stack setup
+     */
+    IntrStack_start = ALIGN(0x10);
+    . += 0x4000;
+    intrStack = .;
+    PROVIDE(intrStackPtr = intrStack);
+
+
+
+
+    _WorkspaceBase = .;
+    __WorkspaceBase = .;
+    . += WorkSpaceSize;
+
+    _RamDiskBase = .;
+    __RamDiskBase = .;
+    . += RamDiskSize;
+    _RamDiskEnd  = .;
+    __RamDiskEnd = .;
+    PROVIDE( _RamDiskSize = _RamDiskEnd - _RamDiskBase );
+
+    _HeapStart = .;
+    __HeapStart = .;
+    . += HeapSize;
+    _HeapEnd = .;
+    __HeapEnd = .;
+
+    clear_end = .;
+
+    /* Sections for compressed .text and .data         */
+    /* after the .datarom section is an int specifying */
+    /* the length of the following compressed image    */
+    /* Executes once then could get overwritten        */
+    .textrom 0x100000 :
+    {
+    	*(.textrom)
+    	_endloader = .;
+    } > ram
+
+    .datarom :
+    {
+    	_dr_start = .;
+    	*(.datarom)
+    	_dr_end = .;
+    } > ram
+    dr_len = _dr_end - _dr_start;
+
+
+    .line 0 : { *(.line) }
+    .debug 0 : { *(.debug) }
+    .debug_sfnames 0 : { *(.debug_sfnames) }
+    .debug_srcinfo 0 : { *(.debug_srcinfo) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+    .debug_aregion 0 : { *(.debug_aregion) }
+    .debug_macinfo 0 : { *(.debug_macinfo) }
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+}
--- a/c/src/lib/libbsp/powerpc/gen83xx/startup/mpc83xx_regs.c
+++ b/c/src/lib/libbsp/powerpc/gen83xx/startup/mpc83xx_regs.c
@@ -0,0 +1,28 @@
+/*===============================================================*\
+| Project: RTEMS generic MPC83xx BSP                              |
+-----------------------------------------------------------------+
+| Partially based on the code references which are named below.   |
+| Adaptions, modifications, enhancements and any recent parts of  |
+| the code are:                                                   |
+|                    Copyright (c) 2005                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file places the mpc83xx registers into a special section   |
+\*===============================================================*/
+#include <mpc83xx/mpc83xx.h>
+
+/*
+ * this uninitialized variable will be overlayed to the hardware
+ * registers in the linker command file
+ */
+m83xxRegisters_t mpc83xx;
--- a/c/src/lib/libbsp/powerpc/shared/irq/irq_asm.S
+++ b/c/src/lib/libbsp/powerpc/shared/irq/irq_asm.S
@@ -47,6 +47,24 @@ SYM (decrementer_exception_vector_prolog_code):
 	decrementer_exception_vector_prolog_code_size = . - decrementer_exception_vector_prolog_code
 #endif

+#if defined(ASM_SYSMGMT_VECTOR)
+	PUBLIC_VAR(sysmgmt_exception_vector_prolog_code)
+
+SYM (sysmgmt_exception_vector_prolog_code):
+	/*
+	 * let room for exception frame
+	 */
+	stwu    r1, - (EXCEPTION_FRAME_END)(r1)
+	stw	r4, GPR4_OFFSET(r1)
+	li	r4, ASM_SYSMGMT_VECTOR
+	ba	shared_raw_irq_code_entry
+
+	PUBLIC_VAR (sysmgmt_exception_vector_prolog_code_size)
+
+	sysmgmt_exception_vector_prolog_code_size = . - sysmgmt_exception_vector_prolog_code
+#endif
+
+
 #if defined(ASM_PIT_VECTOR)
 	PUBLIC_VAR(pit_exception_vector_prolog_code)

--- a/c/src/lib/libbsp/powerpc/shared/vectors/vectors.h
+++ b/c/src/lib/libbsp/powerpc/shared/vectors/vectors.h
@@ -87,12 +87,22 @@ extern	unsigned int  tgpr_clr_exception_vector_code_prolog_size[];
 */
 extern  void external_exception_vector_prolog_code();
 extern  unsigned int  external_exception_vector_prolog_code_size[];
+#if defined(ASM_DEC_VECTOR)
 extern  void decrementer_exception_vector_prolog_code();
 extern  unsigned int  decrementer_exception_vector_prolog_code_size[];
+#endif
+#if defined(ASM_SYSMGMT_VECTOR)
+extern  void sysmgmt_exception_vector_prolog_code();
+extern  unsigned int  sysmgmt_exception_vector_prolog_code_size[];
+#endif
+#if defined(ASM_PIT_VECTOR)
 extern  void pit_exception_vector_prolog_code();
 extern  unsigned int  pit_exception_vector_prolog_code_size[];
+#endif
+#if defined(ASM_FIT_VECTOR)
 extern  void fit_exception_vector_prolog_code();
 extern  unsigned int  fit_exception_vector_prolog_code_size[];
+#endif

 /* codemove is like memmove, but it also gets the cache line size
 * as 4th parameter to synchronize them. If this last parameter is
--- a/c/src/lib/libbsp/powerpc/shared/vectors/vectors_init.c
+++ b/c/src/lib/libbsp/powerpc/shared/vectors/vectors_init.c
@@ -173,6 +173,11 @@ void initialize_exceptions()

  switch ( get_ppc_cpu_type() ) {
    case PPC_603e:
+    case PPC_603ev:
+    case PPC_603le:
+    case PPC_e300c1:
+    case PPC_e300c2:
+    case PPC_e300c3:
    case PPC_8240:
      has_shadowed_gprs = 1;  
    default: break;
--- a/c/src/lib/libbsp/powerpc/virtex/.cvsignore
+++ b/c/src/lib/libbsp/powerpc/virtex/.cvsignore
@@ -1,14 +1,8 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
 Makefile
 Makefile.in
-missing
-mkinstalldirs
+aclocal.m4
+autom4te.cache
+config.cache
+config.log
+config.status
+configure
--- a/c/src/lib/libbsp/powerpc/virtex/ChangeLog
+++ b/c/src/lib/libbsp/powerpc/virtex/ChangeLog
@@ -1,3 +1,7 @@
+2007-07-10	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
+	* startup/linkcmds.dl: 
+	removed
+
 2007-07-05	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

 	* include/bsp.h:
--- a/c/src/lib/libbsp/powerpc/virtex/Makefile.am
+++ b/c/src/lib/libbsp/powerpc/virtex/Makefile.am
@@ -9,8 +9,10 @@ include $(top_srcdir)/../../bsp.am

 dist_project_lib_DATA = bsp_specs

-include_HEADERS = include/bsp.h
+include_HEADERS = include/bsp.h 
 include_HEADERS += include/tm27.h
+include_HEADERS += include/xparameters_dflt.h
+include_HEADERS += network/xiltemac.h

 nodist_include_HEADERS = include/bspopts.h
 DISTCLEANFILES = include/bspopts.h
@@ -21,7 +23,13 @@ include_bspdir = $(includedir)/bsp

 include_HEADERS += include/coverhd.h

-dist_project_lib_DATA += startup/linkcmds startup/linkcmds.dl
+EXTRA_DIST = ../../powerpc/shared/start/rtems_crti.S
+rtems_crti.$(OBJEXT): ../../powerpc/shared/start/rtems_crti.S
+	$(CPPASCOMPILE) -o $@ -c $<
+project_lib_DATA = rtems_crti.$(OBJEXT)
+
+dist_project_lib_DATA += startup/linkcmds
+

 noinst_PROGRAMS += startup.rel
 startup_rel_SOURCES = startup/bspclean.c ../../shared/bsplibc.c \
@@ -68,16 +76,6 @@ noinst_PROGRAMS += network.rel
 network_rel_SOURCES = network/xiltemac.c
 network_rel_CPPFLAGS = $(AM_CPPFLAGS)
 network_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-
-
-##RSG Start
-## include_HEADERS += include/xiltemac.h
-#noinst_PROGRAMS += xiltemac.rel
-#xiltemac_rel_SOURCES = network/xiltemac.c
-#xiltemac_rel_CPPFLAGS = -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ $(AM_CPPFLAGS) -O0 -g
-#xiltemac_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-##RSG End
-
 endif

 noinst_LIBRARIES = libbsp.a
@@ -93,7 +91,7 @@ libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/@exceptions@/rtems-cpu.rel \
    ../../../libcpu/@RTEMS_CPU@/ppc403/timer.rel \
    ../../../libcpu/@RTEMS_CPU@/ppc403/tty_drv.rel

-EXTRA_DIST = times
+EXTRA_DIST += times

 include $(srcdir)/preinstall.am
 include $(top_srcdir)/../../../../automake/local.am
--- a/c/src/lib/libbsp/powerpc/virtex/bsp_specs
+++ b/c/src/lib/libbsp/powerpc/virtex/bsp_specs
@@ -3,12 +3,10 @@
 %rename link old_link

 *startfile:
-%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems: \
-%{!qrtems_debug: } \
-%{qrtems_debug: }ecrti%O%s}}
+%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems:  ecrti%O%s rtems_crti%O%s  crtbegin.o%s}}

 *endfile:
-%{!qrtems: %(old_endfile)} %{qrtems: ecrtn%O%s}
+%{!qrtems: %(old_endfile)} %{qrtems: crtend.o%s ecrtn.o%s}

 *link:
 %{!qrtems: %(old_link)} %{qrtems: -dc -dp -u __vectors -u download_entry -N }
--- a/c/src/lib/libbsp/powerpc/virtex/preinstall.am
+++ b/c/src/lib/libbsp/powerpc/virtex/preinstall.am
@@ -8,18 +8,23 @@ endif
 PREINSTALL_DIRS =
 DISTCLEANFILES += $(PREINSTALL_DIRS)

+all-local: $(TMPINSTALL_FILES)
+
+TMPINSTALL_FILES =
+CLEANFILES = $(TMPINSTALL_FILES)
+
 all-am: $(PREINSTALL_FILES)

 PREINSTALL_FILES =
-CLEANFILES = $(PREINSTALL_FILES)
+CLEANFILES += $(PREINSTALL_FILES)

 $(PROJECT_LIB)/$(dirstamp):
-	@$(mkdir_p) $(PROJECT_LIB)
+	@$(MKDIR_P) $(PROJECT_LIB)
 	@: > $(PROJECT_LIB)/$(dirstamp)
 PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)

 $(PROJECT_INCLUDE)/$(dirstamp):
-	@$(mkdir_p) $(PROJECT_INCLUDE)
+	@$(MKDIR_P) $(PROJECT_INCLUDE)
 	@: > $(PROJECT_INCLUDE)/$(dirstamp)
 PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)

@@ -31,6 +36,39 @@ $(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h

+$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
+
+$(PROJECT_INCLUDE)/xparameters_dflt.h: include/xparameters_dflt.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/xparameters_dflt.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/xparameters_dflt.h
+
+$(PROJECT_INCLUDE)/xiltemac.h: network/xiltemac.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/xiltemac.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/xiltemac.h
+
+$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
+
+$(PROJECT_INCLUDE)/bsp/$(dirstamp):
+	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
+	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
+PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
+
+$(PROJECT_INCLUDE)/coverhd.h: include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
+
+$(PROJECT_LIB)/rtems_crti.$(OBJEXT): rtems_crti.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
+TMPINSTALL_FILES += $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
+
+$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
+PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
+
 $(PROJECT_INCLUDE)/bsp/opbintctrl.h: include/opbintctrl.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/opbintctrl.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/opbintctrl.h
@@ -43,37 +81,3 @@ $(PROJECT_INCLUDE)/bsp/vectors.h: ../../powerpc/shared/vectors/vectors.h $(PROJE
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/vectors.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/vectors.h

-
-$(PROJECT_INCLUDE)/xiltemac.h: network/xiltemac.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/xiltemac.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/xiltemac.h
-
-$(PROJECT_INCLUDE)/xparameters_dflt.h: include/xparameters_dflt.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/xparameters_dflt.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/xparameters_dflt.h
-
-$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
-
-$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
-$(PROJECT_INCLUDE)/coverhd.h: include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
-
-$(PROJECT_INCLUDE)/bsp/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
-	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-
-$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
-
-$(PROJECT_LIB)/linkcmds.dl: startup/linkcmds.dl $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds.dl
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds.dl
-
--- a/c/src/lib/libbsp/powerpc/virtex/startup/linkcmds
+++ b/c/src/lib/libbsp/powerpc/virtex/startup/linkcmds
@@ -1,4 +1,4 @@
-/* Greg modifications
+/* 
 *  This file contains directives for the GNU linker which are specific
 *  to the virtex
 *  This file is intended to be used together with dlentry.s
@@ -46,98 +46,227 @@ SECTIONS
     *(set_domain_*);
     *(set_pseudo_*);

+    /* C++ constructors/destructors */
+    *(.gnu.linkonce.t*)
+
+    /*  Initialization and finalization code.
+     *
+     *  Various files can provide initialization and finalization functions.
+     *  The bodies of these functions are in .init and .fini sections. We
+     *  accumulate the bodies here, and prepend function prologues from
+     *  ecrti.o and function epilogues from ecrtn.o. ecrti.o must be linked
+     *  first; ecrtn.o must be linked last. Because these are wildcards, it
+     *  doesn't matter if the user does not actually link against ecrti.o and
+     *  ecrtn.o; the linker won't look for a file to match a wildcard.  The
+     *  wildcard also means that it doesn't matter which directory ecrti.o
+     *  and ecrtn.o are in. 
+     */
+    PROVIDE (_init = .);
+    *ecrti.o(.init)
+    *(.init)
+    *ecrtn.o(.init)
+    
+    PROVIDE (_fini = .);
+    *ecrti.o(.fini)
+    *(.fini)
+    *ecrtn.o(.init)
+
+    /* 
+     *  C++ constructors and destructors for static objects.
+     *  PowerPC EABI does not use crtstuff yet, so we build "old-style"
+     *  constructor and destructor lists that begin with the list lenght
+     *  end terminate with a NULL entry.
+     */
+     
+    PROVIDE (__CTOR_LIST__ = .);	     
+    *crtbegin.o(.ctors)
+    *(.ctors)
+    *crtend.o(.ctors)
+    LONG(0)
+    PROVIDE (__CTOR_END__ = .);
+	
+    PROVIDE (__DTOR_LIST__ = .);
+    *crtbegin.o(.dtors)
+    *(.dtors)
+    *crtend.o(.dtors)
+    LONG(0)
+    PROVIDE (__DTOR_END__ = .);
+	
+    /* Exception frame info */
     *(.eh_frame)
-     *(.gnu.linkonce.r*)
-     *(.descriptors)
-     *(rom_ver)
+    /* Miscellaneous read-only data */
+    _rodata_start = . ;
+    *(.gnu.linkonce.r*)
+    *(.lit)
+    *(.shdata)
+    *(.rodata)
+    *(.rodata1)
+    *(.descriptors)
+    *(rom_ver)
+    _erodata = .;
+
+    PROVIDE (__EXCEPT_START__ = .);
+    *(.gcc_except_table)
+    PROVIDE (__EXCEPT_END__ = .);
+    __GOT_START__ = .;
+    s.got = .;
+    *(.got.plt) 
+    *(.got)
+    *(.got1)
+    PROVIDE (__GOT2_START__ = .);
+    PROVIDE (_GOT2_START_ = .);
+    *(.got2)
+    PROVIDE (__GOT2_END__ = .);
+    PROVIDE (_GOT2_END_ = .);
+    
+    PROVIDE (__FIXUP_START__ = .);
+    PROVIDE (_FIXUP_START_ = .);
+    *(.fixup)
+    PROVIDE (_FIXUP_END_ = .);
+    PROVIDE (__FIXUP_END__ = .);
+    
+
+    /* Various possible names for the end of the .text section */
     etext = ALIGN(0x10);
     _etext = .;

-     *(.gnu.linkonce.t*)
-
-     __CTOR_LIST__ = .;
-     LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
-     *(.ctors)
-     LONG(0)
-     __CTOR_END__ = .;
-
-     __DTOR_LIST__ = .;
-     LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
-     *(.dtors)
-     LONG(0)
-     __DTOR_END__ = .;
-
     *(.lit)
     *(.shdata)
-     _init = .; __init = .; *(.init)
-     _fini = .; __fini = .; *(.fini)
     _endtext = ALIGN(0x10);
     text.end = .;
-  } > RAM
+     text.size = text.end - text.start;
+  } >RAM

  text.size = text.end - text.start;

-  /* R/W Data */
-  .data :
-  {
-    *(.data)
-    *(.data1)
-     *(.data.* .gnu.linkonce.d*)
-    PROVIDE (__SDATA_START__ = .);
-    *(.sdata*)
-    *(.gnu.linkonce.s.*)
-  } > RAM
+  .jcr : { KEEP (*(.jcr)) } >RAM

-  PROVIDE (__EXCEPT_START__ = .);
-  .gcc_except_table   :
-  {
-	*(.gcc_except_table)
-  } >RAM
-  PROVIDE (__EXCEPT_END__ = .);
+    .rel.dyn : {
+      *(.rel.init)
+      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
+      *(.rel.fini)
+      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
+      *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*)
+      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
+      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
+      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
+      *(.rel.ctors)
+      *(.rel.dtors)
+      *(.rel.got)
+      *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
+      *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
+      *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
+      *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
+      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
+    } >RAM
+    .rela.dyn : {
+      *(.rela.init)
+      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
+      *(.rela.fini)
+      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
+      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
+      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
+      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
+      *(.rela.ctors)
+      *(.rela.dtors)
+      *(.rela.got)
+      *(.rela.got1)
+      *(.rela.got2)
+      *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
+      *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
+      *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
+      *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
+      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
+    } >RAM

-  __GOT_START__ = .;
-  .got :
-  {
-     s.got = .;
-     *(.got.plt) *(.got)
-  } > RAM
-  __GOT_END__ = .;
-
-  .got1 :
-  {
-	*(.got1)
-  } >RAM
-
-  PROVIDE (__GOT2_START__ = .);
-  PROVIDE (_GOT2_START_ = .);
-  .got2		  :
-  {
-	*(.got2)
-  } >RAM
-  PROVIDE (__GOT2_END__ = .);
-  PROVIDE (_GOT2_END_ = .);
-
-  PROVIDE (__FIXUP_START__ = .);
-  PROVIDE (_FIXUP_START_ = .);
-  .fixup	  : { *(.fixup) 	} >RAM
-  PROVIDE (_FIXUP_END_ = .);
-  PROVIDE (__FIXUP_END__ = .);
-
-  PROVIDE (__SDATA2_START__ = .);
+    PROVIDE (__SDATA2_START__ = .);
  .sdata2   	  : { *(.sdata2) *(.gnu.linkonce.s2.*)	} >RAM
  .sbss2   	  : { *(.sbss2) *(.gnu.linkonce.sb2.*)	} >RAM
-  PROVIDE (__SBSS2_END__ = .);
+    PROVIDE (__SBSS2_END__ = .);
+	
+    .sbss2   	  : { *(.sbss2) 	} >RAM
+    PROVIDE (__SBSS2_END__ = .);
+	
+    /* R/W Data */
+    .data ( . ) :
+    {
+      . = ALIGN (4);

-  __SBSS_START__ = .;
-  .bss :
-  {
-    bss.start = .;
-    *(.bss .bss* .gnu.linkonce.b*)
-    *(.sbss*) *(COMMON)
-    bss.end = ALIGN(4);
-    bss.size = bss.end - bss.start;
-  } > RAM
-  __SBSS_END__ = .;
+      data.start = .;
+
+      *(.data)
+      *(.data1)
+      *(.data.* .gnu.linkonce.d.*)
+      PROVIDE (__SDATA_START__ = .);
+      *(.sdata*)
+      *(.gnu.linkonce.s.*)
+      data.end = .;
+      data.size = data.end - data.start;
+    } >RAM
+
+    __SBSS_START__ = .;
+    .bss :
+    {
+      bss.start = .;
+      *(.bss .bss* .gnu.linkonce.b*)
+      *(.sbss*) *(COMMON)
+      . = ALIGN(4);
+      bss.end = .;
+    } >RAM
+    __SBSS_END__ = .;
+
+    __SBSS_START__ = .;
+    .bss :
+    {
+      bss.start = .;
+      *(.bss .bss* .gnu.linkonce.b*)
+      *(.sbss*) *(COMMON)
+      . = ALIGN(4);
+      bss.end = .;
+      bss.size = bss.end - bss.start;
+    } >RAM
+    __SBSS_END__ = .;
+    
+    PROVIDE(_bss_start   = ADDR(.bss));
+    PROVIDE(_bss_size    = SIZEOF(.bss));
+    PROVIDE(bss.size    = SIZEOF(.bss));
+    PROVIDE(_data_start  = ADDR(.data));
+    PROVIDE(_data_size   = SIZEOF(.data));
+    PROVIDE(_text_start  = ADDR(.text));
+    PROVIDE(_text_size   = SIZEOF(.text));
+    PROVIDE(_end = data.end);
+
+    .gzipmalloc : {
+	. = ALIGN (16);
+        _startmalloc = .;
+     } >RAM
+          	
+
+    /*
+     * Interrupt stack setup
+     */
+    IntrStack_start = ALIGN(0x10);
+    . += 0x4000;
+    intrStack = .;
+    PROVIDE(intrStackPtr = intrStack);
+
+    /* Sections for compressed .text and .data         */
+    /* after the .datarom section is an int specifying */
+    /* the length of the following compressed image    */
+    /* Executes once then could get overwritten        */
+    .textrom 0x100000 :
+    {
+    	*(.textrom)
+    	_endloader = .;
+    } >RAM
+
+    .datarom :
+    {
+    	_dr_start = .;
+    	*(.datarom)
+    	_dr_end = .;
+    } >RAM
+    dr_len = _dr_end - _dr_start;

  /* align bottom of 32k init stack at a 32k boundary */
  . = . + 0x4000;
@@ -155,15 +284,14 @@ SECTIONS

  PROVIDE(_end = intrStack);

-  .line 0 : { *(.line) }
-  .debug 0 : { *(.debug) }
-  .debug_sfnames 0 : { *(.debug_sfnames) }
-  .debug_srcinfo 0 : { *(.debug_srcinfo) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_aranges 0 : { *(.debug_aranges) }
-  .debug_aregion 0 : { *(.debug_aregion) }
-  .debug_macinfo 0 : { *(.debug_macinfo) }
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-
+    .line 0 : { *(.line) }
+    .debug 0 : { *(.debug) }
+    .debug_sfnames 0 : { *(.debug_sfnames) }
+    .debug_srcinfo 0 : { *(.debug_srcinfo) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+    .debug_aregion 0 : { *(.debug_aregion) }
+    .debug_macinfo 0 : { *(.debug_macinfo) }
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
 }
--- a/c/src/lib/libbsp/powerpc/virtex/startup/linkcmds.dl
+++ b/c/src/lib/libbsp/powerpc/virtex/startup/linkcmds.dl
@@ -1,154 +0,0 @@
-/*
- *  This file contains directives for the GNU linker which are specific
- *  to the helas403
- *  This file is intended to be used together with dlentry.s
- *  it will generate downloadable code
- *
- *  $Id$
- */
-
-OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc",
-              "elf32-powerpc")
-OUTPUT_ARCH(powerpc)
- 
-ENTRY(download_entry)
- 
-MEMORY
-  {
-        RAM : ORIGIN = 0, LENGTH = 8M
-        FLASH : ORIGIN = 0xFFF00000, LENGTH = 512K
-  }
- 
-SECTIONS
-{
-  .vectors : 0x00010100
-  {
-    *(.vectors)
-  } > RAM
-
-  .text :
-  {
-     text.start = . ;
-     *(.entry)
-     *(.entry2)
-     *(.text*)
-     *(.rodata)
-     *(.rodata1)
-
-     /*
-      * Special FreeBSD sysctl sections.
-      */
-     . = ALIGN (16);
-     __start_set_sysctl_set = .;
-     *(set_sysctl_*);
-     __stop_set_sysctl_set = ABSOLUTE(.);
-     *(set_domain_*);
-     *(set_pseudo_*);
-
-     *.(eh_frame)
-     *(.descriptors)
-     *(rom_ver)
-     etext = ALIGN(0x10);
-     _etext = .;
-
-
-     __CTOR_LIST__ = .;
-     LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
-     *(.ctors)
-     LONG(0)
-     __CTOR_END__ = .;
-
-     __DTOR_LIST__ = .;
-     LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
-     *(.dtors)
-     LONG(0)
-     __DTOR_END__ = .;
-
-     *(.lit)
-     *(.shdata)
-     *(.init)
-     *(.fini)
-     _endtext = ALIGN(0x10);
-     text.end = .;
-  } > RAM
-
-  text.size = text.end - text.start;
-
-  /* R/W Data */
-  .data :
-  {
-    *(.data)
-    *(.data1)
-    PROVIDE (__SDATA_START__ = .);
-    *(.sdata*)
-  } > RAM
- 
-  PROVIDE (__EXCEPT_START__ = .);
-  .gcc_except_table   :
-  { 
-	*(.gcc_except_table) 
-  } >RAM
-  PROVIDE (__EXCEPT_END__ = .);
-
-  __GOT_START__ = .;
-  .got :
-  {
-     s.got = .;
-     *(.got.plt) *(.got)
-  } > RAM
-  __GOT_END__ = .;
-
-  .got1 : 
-  { 
-	*(.got1) 		
-  } >RAM
-
-  PROVIDE (__GOT2_START__ = .);
-  PROVIDE (_GOT2_START_ = .);
-  .got2		  :  
-  { 
-	*(.got2) 	
-  } >RAM
-  PROVIDE (__GOT2_END__ = .);
-  PROVIDE (_GOT2_END_ = .);
-
-  PROVIDE (__FIXUP_START__ = .);
-  PROVIDE (_FIXUP_START_ = .);
-  .fixup	  : { *(.fixup) 	} >RAM
-  PROVIDE (_FIXUP_END_ = .);
-  PROVIDE (__FIXUP_END__ = .);
- 
-  PROVIDE (__SDATA2_START__ = .);
-  .sdata2   	  : { *(.sdata2) 	} >RAM
-  .sbss2   	  : { *(.sbss2) 	} >RAM
-  PROVIDE (__SBSS2_END__ = .);
-
-  .sbss2   	  : { *(.sbss2) 	} >RAM
-  PROVIDE (__SBSS2_END__ = .);
-
-  __SBSS_START__ = .;
-  .bss :
-  {
-    bss.start = .;
-    *(.bss .bss* .gnu.linkonce.b*)
-    *(.sbss*) *(COMMON)
-    bss.end = ALIGN(4);
-  } > RAM
-  __SBSS_END__ = .;
- 
-  bss.size = bss.end - bss.start;
-  PROVIDE(_end = bss.end);
-
-  .line 0 : { *(.line) }
-  .debug 0 : { *(.debug) }
-  .debug_sfnames 0 : { *(.debug_sfnames) }
-  .debug_srcinfo 0 : { *(.debug_srcinfo) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_aranges 0 : { *(.debug_aranges) }
-  .debug_aregion 0 : { *(.debug_aregion) }
-  .debug_macinfo 0 : { *(.debug_macinfo) }
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-}
-
-
--- a/c/src/lib/libcpu/powerpc/ChangeLog
+++ b/c/src/lib/libcpu/powerpc/ChangeLog
@@ -1,3 +1,9 @@
+2007-07-09	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
+
+	* configure.ac, Makefile.am, mpc83xx/include/mpc83xx.h,
+	* mpc83xx/network/tsec.c, mpc83xx/network/tsec.h :
+	added support for MPC83xx controllers
+	
 2007-07-05	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

 	* configure.ac, Makefile.am:
--- a/c/src/lib/libcpu/powerpc/Makefile.am
+++ b/c/src/lib/libcpu/powerpc/Makefile.am
@@ -324,5 +324,17 @@ mpc8260_timer_rel_CPPFLAGS = $(AM_CPPFLAGS)
 mpc8260_timer_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
 endif

+if mpc83xx
+include_mpc83xxdir = $(includedir)/mpc83xx
+include_mpc83xx_HEADERS  = mpc83xx/include/mpc83xx.h
+include_mpc83xx_HEADERS += mpc83xx/network/tsec.h
+## mpc83xx/network
+noinst_PROGRAMS += mpc83xx/tsec.rel
+mpc83xx_tsec_rel_SOURCES   = mpc83xx/network/tsec.c
+mpc83xx_tsec_rel_CPPFLAGS  = $(AM_CPPFLAGS) 
+mpc83xx_tsec_rel_CPPFLAGS += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__  -D__BSD_VISIBLE
+mpc83xx_tsec_rel_LDFLAGS   = $(RTEMS_RELLDFLAGS)
+endif
+
 include $(srcdir)/preinstall.am
 include $(top_srcdir)/../../../automake/local.am
--- a/c/src/lib/libcpu/powerpc/configure.ac
+++ b/c/src/lib/libcpu/powerpc/configure.ac
@@ -45,12 +45,13 @@ AM_CONDITIONAL(shared, \
 || test "$RTEMS_CPU_MODEL" = "ppc405" \
 || test "$RTEMS_CPU_MODEL" = "mpc604" \
 || test "$RTEMS_CPU_MODEL" = "mpc6xx" \
+|| test "$RTEMS_CPU_MODEL" = "mpc8xx" \
 || test "$RTEMS_CPU_MODEL" = "mpc821" \
 || test "$RTEMS_CPU_MODEL" = "mpc860" \
 || test "$RTEMS_CPU_MODEL" = "mpc8240" \
 || test "$RTEMS_CPU_MODEL" = "mpc8245" \
 || test "$RTEMS_CPU_MODEL" = "mpc8260" \
-|| test "$RTEMS_CPU_MODEL" = "mpc8xx" )
+|| test "$RTEMS_CPU_MODEL" = "mpc83xx" )

 ## test on CPU type
 AM_CONDITIONAL(mpc505, test "$RTEMS_CPU_MODEL" = "mpc505")
@@ -63,11 +64,13 @@ AM_CONDITIONAL(mpc6xx, test "$RTEMS_CPU_MODEL" = "mpc6xx" \
 || test "$RTEMS_CPU_MODEL" = "mpc7457" \
 || test "$RTEMS_CPU_MODEL" = "mpc750" \
 || test "$RTEMS_CPU_MODEL" = "mpc8240" \
-|| test "$RTEMS_CPU_MODEL" = "mpc8245" )
+|| test "$RTEMS_CPU_MODEL" = "mpc8245" \
+|| test "$RTEMS_CPU_MODEL" = "mpc83xx" )
 AM_CONDITIONAL(mpc8xx, test "$RTEMS_CPU_MODEL" = "mpc8xx" \
 || test "$RTEMS_CPU_MODEL" = "mpc821" \
 || test "$RTEMS_CPU_MODEL" = "mpc860" )
 AM_CONDITIONAL(mpc8260, test "$RTEMS_CPU_MODEL" = "mpc8260")
+AM_CONDITIONAL(mpc83xx, test "$RTEMS_CPU_MODEL" = "mpc83xx")

 # the ppc405 shares files with the ppc403
 AM_CONDITIONAL(ppc403,[test "$RTEMS_CPU_MODEL" = "ppc403" \
--- a/c/src/lib/libcpu/powerpc/mpc83xx/include/mpc83xx.h
+++ b/c/src/lib/libcpu/powerpc/mpc83xx/include/mpc83xx.h
--- a/c/src/lib/libcpu/powerpc/mpc83xx/network/tsec.c
+++ b/c/src/lib/libcpu/powerpc/mpc83xx/network/tsec.c
--- a/c/src/lib/libcpu/powerpc/mpc83xx/network/tsec.h
+++ b/c/src/lib/libcpu/powerpc/mpc83xx/network/tsec.h
@@ -0,0 +1,82 @@
+/*===============================================================*\
+| Project: RTEMS support for MPC83xx                              |
+-----------------------------------------------------------------+
+|                    Copyright (c) 2007                           |
+|                    Embedded Brains GmbH                         |
+|                    Obere Lagerstr. 30                           |
+|                    D-82178 Puchheim                             |
+|                    Germany                                      |
+|                    rtems@embedded-brains.de                     |
+-----------------------------------------------------------------+
+| The license and distribution terms for this file may be         |
+| found in the file LICENSE in this distribution or at            |
+|                                                                 |
+| http://www.rtems.com/license/LICENSE.                           |
+|                                                                 |
+-----------------------------------------------------------------+
+| this file declares the MPC83xx TSEC networking driver           |
+\*===============================================================*/
+
+#include <rtems/rtems_bsdnet.h>
+
+/*=========================================================================*\
+| Function:                                                                 |
+\*-------------------------------------------------------------------------*/
+int mpc83xx_tsec_mdio_read
+(
+/*-------------------------------------------------------------------------*\
+| Purpose:                                                                  |
+|   read register of a phy                                                  |
+---------------------------------------------------------------------------+
+| Input Parameters:                                                         |
+\*-------------------------------------------------------------------------*/
+ int phy,                              /* PHY number to access or -1       */
+ void *uarg,                           /* unit argument                    */
+ unsigned reg,                         /* register address                 */
+ uint32_t *pval                        /* ptr to read buffer               */
+ );
+/*-------------------------------------------------------------------------*\
+| Return Value:                                                             |
+|    0, if ok, -1 if failed                                                 |
+\*=========================================================================*/
+
+/*=========================================================================*\
+| Function:                                                                 |
+\*-------------------------------------------------------------------------*/
+int mpc83xx_tsec_mdio_write
+(
+/*-------------------------------------------------------------------------*\
+| Purpose:                                                                  |
+|   write register of a phy                                                 |
+---------------------------------------------------------------------------+
+| Input Parameters:                                                         |
+\*-------------------------------------------------------------------------*/
+ int phy,                              /* PHY number to access or -1       */
+ void *uarg,                           /* unit argument                    */
+ unsigned reg,                         /* register address                 */
+ uint32_t val                          /* write value                      */
+ );
+/*-------------------------------------------------------------------------*\
+| Return Value:                                                             |
+|    0, if ok, -1 if failed                                                 |
+\*=========================================================================*/
+
+/*=========================================================================*\
+| Function:                                                                 |
+\*-------------------------------------------------------------------------*/
+int rtems_mpc83xx_tsec_driver_attach_detach
+(
+/*-------------------------------------------------------------------------*\
+| Purpose:                                                                  |
+|   attach or detach the driver                                             |
+---------------------------------------------------------------------------+
+| Input Parameters:                                                         |
+\*-------------------------------------------------------------------------*/
+ struct rtems_bsdnet_ifconfig *config, /* interface configuration          */
+ int attaching                         /* 0 = detach, else attach          */
+ );
+/*-------------------------------------------------------------------------*\
+| Return Value:                                                             |
+|    1, if success                                                       |
+\*=========================================================================*/
+
--- a/c/src/lib/libcpu/powerpc/preinstall.am
+++ b/c/src/lib/libcpu/powerpc/preinstall.am
@@ -192,3 +192,17 @@ $(PROJECT_INCLUDE)/mpc8260/mmu.h: mpc8260/include/mmu.h $(PROJECT_INCLUDE)/mpc82
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/mpc8260/mmu.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/mpc8260/mmu.h
 endif
+if mpc83xx
+$(PROJECT_INCLUDE)/mpc83xx/$(dirstamp):
+	@$(MKDIR_P) $(PROJECT_INCLUDE)/mpc83xx
+	@: > $(PROJECT_INCLUDE)/mpc83xx/$(dirstamp)
+PREINSTALL_DIRS += $(PROJECT_INCLUDE)/mpc83xx/$(dirstamp)
+
+$(PROJECT_INCLUDE)/mpc83xx/mpc83xx.h: mpc83xx/include/mpc83xx.h $(PROJECT_INCLUDE)/mpc83xx/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/mpc83xx/mpc83xx.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/mpc83xx/mpc83xx.h
+
+$(PROJECT_INCLUDE)/mpc83xx/tsec.h: mpc83xx/network/tsec.h $(PROJECT_INCLUDE)/mpc83xx/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/mpc83xx/tsec.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/mpc83xx/tsec.h
+endif
--- a/c/src/lib/libcpu/powerpc/shared/include/cpuIdent.h
+++ b/c/src/lib/libcpu/powerpc/shared/include/cpuIdent.h
@@ -40,6 +40,9 @@ typedef enum
  PPC_8240 = PPC_8260,
  PPC_8245 = 0x8081,
  PPC_603le = 0x8082, /* 603le core, in MGT5100 and MPC5200 */
+  PPC_e300c1  = 0x8083, /* e300c1  core, in MPC83xx*/
+  PPC_e300c2  = 0x8084, /* e300c2  core */
+  PPC_e300c3  = 0x8085, /* e300c3  core */
  PPC_PSIM = 0xfffe,  /* GDB PowerPC simulator -- fake version */
  PPC_UNKNOWN = 0xffff
 } ppc_cpu_id_t;
--- a/c/src/lib/libcpu/powerpc/shared/src/cache.c
+++ b/c/src/lib/libcpu/powerpc/shared/src/cache.c
@@ -8,7 +8,7 @@

 #include <rtems.h>
 #include "cache_.h"
-
+#include <rtems/powerpc/registers.h>

 /*
 * CACHE MANAGER: The following functions are CPU-specific.
@@ -19,7 +19,7 @@
 * FIXME: Some functions simply have not been implemented.
 */
 
-#if defined(ppc603) || defined(mpc8260)	   /* And possibly others */
+#if defined(ppc603) || defined(ppc603e) || defined(mpc8260) /* And possibly others */

 /* Helpful macros */
 #define PPC_Get_HID0( _value ) \
@@ -49,7 +49,7 @@ void _CPU_cache_enable_data (
 {
  uint32_t   value;
  PPC_Get_HID0( value );
-  value |= 0x00004000;        /* set DCE bit */
+  value |= HID0_DCE;        /* set DCE bit */
  PPC_Set_HID0( value );
 }

@@ -58,10 +58,61 @@ void _CPU_cache_disable_data (
 {
  uint32_t   value;
  PPC_Get_HID0( value );
-  value &= 0xFFFFBFFF;        /* clear DCE bit */
+  value &= ~HID0_DCE;        /* clear DCE bit */
  PPC_Set_HID0( value );
 }

+void _CPU_cache_invalidate_1_data_line(
+	const void * _address )
+{
+  register const void *__address = _address;
+  asm volatile ( "dcbi 0,%0" :: "r"(__address) : "memory" );
+}
+
+void _CPU_cache_invalidate_entire_data (
+	void )
+{
+  uint32_t  value;
+  PPC_Get_HID0( value );
+  value |= HID0_DCI;        /* set data flash invalidate bit */
+  PPC_Set_HID0( value );
+  value &= ~HID0_DCI;        /* clear data flash invalidate bit */
+  PPC_Set_HID0( value );
+}
+
+void _CPU_cache_freeze_data (
+	void )
+{
+  uint32_t  value;
+  PPC_Get_HID0( value );
+  value |= HID0_DLOCK;        /* set data cache lock bit */
+  PPC_Set_HID0( value );
+}
+
+void _CPU_cache_unfreeze_data (
+	void )
+{
+  uint32_t  value;
+  PPC_Get_HID0( value );
+  value &= ~HID0_DLOCK;        /* set data cache lock bit */
+  PPC_Set_HID0( value );
+}
+
+void _CPU_cache_flush_1_data_line(
+	const void * _address )
+{
+  register const void *__address = _address;
+  asm volatile ( "dcbf 0,%0" :: "r" (__address) : "memory" );
+}
+
+void _CPU_cache_flush_entire_data (
+	void )
+{
+  /*
+   * FIXME: how can we do this?
+   */
+}
+
 void _CPU_cache_enable_instruction (
 	void )
 {
@@ -80,6 +131,42 @@ void _CPU_cache_disable_instruction (
  PPC_Set_HID0( value );
 }

+void _CPU_cache_invalidate_1_instruction_line(
+	const void * _address )
+{
+  register const void *__address = _address;
+  asm volatile ( "icbi 0,%0" :: "r" (__address) : "memory");
+}
+
+void _CPU_cache_invalidate_entire_instruction (
+	void )
+{
+  uint32_t  value;
+  PPC_Get_HID0( value );
+  value |= HID0_ICFI;        /* set data flash invalidate bit */
+  PPC_Set_HID0( value );
+  value &= ~HID0_ICFI;        /* clear data flash invalidate bit */
+  PPC_Set_HID0( value );
+}
+
+void _CPU_cache_freeze_instruction (
+	void )
+{
+  uint32_t  value;
+  PPC_Get_HID0( value );
+  value |= HID0_ILOCK;        /* set instruction cache lock bit */
+  PPC_Set_HID0( value );
+}
+
+void _CPU_cache_unfreeze_instruction (
+	void )
+{
+  uint32_t  value;
+  PPC_Get_HID0( value );
+  value &= ~HID0_ILOCK;        /* set instruction cache lock bit */
+  PPC_Set_HID0( value );
+}
+
 #elif ( defined(mpx8xx) || defined(mpc860) || defined(mpc821) )

 #define mtspr(_spr,_reg) \
--- a/c/src/lib/libcpu/powerpc/shared/src/cache_.h
+++ b/c/src/lib/libcpu/powerpc/shared/src/cache_.h
@@ -4,6 +4,11 @@

 #ifndef __POWERPC_CACHE_h
 #define __POWERPC_CACHE_h
+/*
+ * get definitions from the score/powerpc header 
+ * about individual cache alignments
+ */
+#include <rtems/score/powerpc.h>

 /*
 * CACHE MANAGER: The following functions are CPU-specific.
@@ -14,17 +19,16 @@
 * FIXME: Some functions simply have not been implemented.
 */

-#if defined(ppc603)                     /* And possibly others */
-#define CPU_DATA_CACHE_ALIGNMENT PPC_CACHE_ALIGNMENT
-#define CPU_INSTRUCTION_CACHE_ALIGNMENT PPC_CACHE_ALIGNMENT
+#if defined(ppc603) || defined(ppc603e) || defined(mpc8260)	   
+   /* And possibly others */

-#elif ( defined(mpc860) || defined(mpc821) )
+#if defined(PPC_CACHE_ALIGNMENT)

 #define CPU_DATA_CACHE_ALIGNMENT PPC_CACHE_ALIGNMENT
 #define CPU_INSTRUCTION_CACHE_ALIGNMENT PPC_CACHE_ALIGNMENT

 #endif
-
+#endif
 #include <libcpu/cache.h>

 #endif
--- a/c/src/libchip/ide/ata.c
+++ b/c/src/libchip/ide/ata.c
@@ -1168,7 +1168,7 @@ ata_initialize(rtems_device_major_number major,
 		ata_irq_data.name   =
 		  IDE_Controller_Table[ctrl_minor].int_vec;
 		ata_irq_data.hdl    = ata_interrupt_handler;
-		ata_irq_data.handle = ctrl_minor;
+		ata_irq_data.handle = (rtems_irq_hdl_param) ctrl_minor;

 		status = ((0 == BSP_install_rtems_irq_handler(&ata_irq_data))
 			  ? RTEMS_INVALID_NUMBER
--- a/c/src/libchip/serial/ns16550.c
+++ b/c/src/libchip/serial/ns16550.c
@@ -205,7 +205,7 @@ NS16550_STATIC void ns16550_write_polled(
  /*
   * wait for transmitter holding register to be empty
   */
-  iTimeout=1000;
+  iTimeout=10000;
  ucLineStatus = (*getReg)(pNS16550, NS16550_LINE_STATUS);
  while ((ucLineStatus & SP_LSR_THOLD) == 0) {
    /*
--- a/cpukit/score/cpu/powerpc/rtems/score/powerpc.h
+++ b/cpukit/score/cpu/powerpc/rtems/score/powerpc.h
@@ -144,6 +144,7 @@ extern "C" {
 #define CPU_MODEL_NAME  "PowerPC 603"

 #define PPC_ALIGNMENT		8
+#define PPC_CACHE_ALIGNMENT	16

 #elif defined(ppc603e)
 
@@ -155,6 +156,7 @@ extern "C" {
 */

 #define PPC_ALIGNMENT		8
+#define PPC_CACHE_ALIGNMENT	16

 #elif defined(mpc604)
 /*
--- a/make/ChangeLog
+++ b/make/ChangeLog
@@ -1,3 +1,8 @@
+2007-07-09	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
+
+	* custom/gen83xx.cfg, custom/mpc8349eamds: added file to support
+	MPC83xx controller based boards
+	
 2007-07-02	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

 	* custom/vitex.cfg: added file to support PPC core in a xilinx
--- a/make/custom/gen83xx.cfg
+++ b/make/custom/gen83xx.cfg
@@ -0,0 +1,39 @@
+#
+#  Shared base config file for GEN83xx BSPs
+#
+#  $Id$
+#
+
+include $(RTEMS_ROOT)/make/custom/default.cfg
+#
+# FIXME: we might want to use the e300 CPU model explicitely,
+# using RTEMS_CPU_MODEL=e300 and -me300
+# but I doubt the compiler actually generates different code
+#
+RTEMS_CPU=powerpc
+RTEMS_CPU_MODEL=mpc83xx
+
+# This is the actual bsp directory used during the build process.
+RTEMS_BSP_FAMILY=gen83xx
+
+#  This contains the compiler options necessary to select the CPU model
+#  and (hopefully) optimize for it. 
+#
+CPU_CFLAGS = -mcpu=603e -mstrict-align -fno-strict-aliasing\
+             -D$(RTEMS_BOARD_MODEL) -D$(RTEMS_83XX_DERIVATE)
+
+# optimize flag: typically -O2
+CFLAGS_OPTIMIZE_V = -O4 -g -fno-keep-inline-functions
+
+# The following are definitions of make-exe which will work using ld as
+# is currently required.
+
+define make-exe
+	$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) \
+        -qnolinkcmds -T $(RTEMS_LINKCMDS) -o $(basename $@).exe \
+	    $(LINK_OBJS) $(LINK_LIBS)
+	$(NM) -g -n $(basename $@).exe > $(basename $@).num
+	$(SIZE) $(basename $@).exe
+endef
+
+# Miscellaneous additions go here
--- a/make/custom/mpc8349eamds.cfg
+++ b/make/custom/mpc8349eamds.cfg
@@ -0,0 +1,16 @@
+#
+#  Config file for customer specific MPC5200 board
+#
+#  $Id$
+#
+
+#
+#  All GEN83xx configurations share the same base file, only a few
+#  parameters differ.
+#  
+
+RTEMS_BOARD_MODEL=MPC8349EAMDS
+RTEMS_83XX_DERIVATE=MPC8349
+RTEMS_LINKCMDS=linkcmds.mpc8349eamds
+
+include $(RTEMS_ROOT)/make/custom/gen83xx.cfg