RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

2009-07-29 Joel Sherrill <joel.sherrill@oarcorp.com>

Browse Source 
* network/network.c: Add csb637 PHY code based upon that in
	MicroMonitor 1.17.
This commit is contained in:
Joel Sherrill
2009-07-29 19:06:53 +00:00
parent 634adfeeae
commit afcecbf750
2 changed files with 100 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
c/src/lib/libbsp/arm/csb337/ChangeLog
View File

@@ -1,3 +1,8 @@
2009-07-29 Joel Sherrill <joel.sherrill@oarcorp.com>
* network/network.c: Add csb637 PHY code based upon that in
MicroMonitor 1.17.
2009-07-16 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Rename BSP_BOOTCARD_OPTIONS to

111
c/src/lib/libbsp/arm/csb337/network/network.c
View File

@@ -5,6 +5,10 @@
* Written by Mike Kelly <mike@cogcomp.com>
* and Jay Monkman <jtm@lopingdog.com>
*
*
* July 2009: Joel Sherrill merged csb637 PHY differences from
* MicroMonitor 1.17.
*
* $Id$
*/
@@ -34,6 +38,12 @@
#include <irq.h>
#include <bspopts.h>
/* enable debugging of the PHY code */
#define PHY_DBG
/* enable debugging of the EMAC code */
/* #define EMAC_DBG */
#if csb637
/* Bit defines for the PHY Status Register #1 (phy address 0x01) */
/* 1 = PHY able to perform 100BASE-T4 */
@@ -216,7 +226,7 @@ uint32_t phyread(uint8_t reg)
/* wait for phy read to complete (was udelay(5000)) */
rtems_task_wake_after(1);
#if EMAC_DBG
#if defined(EMAC_DBG)
printk(
"EMAC: Phy 0, Reg %d, Read 0x%04lx.\n",
reg,
@@ -238,8 +248,8 @@ void phywrite(uint8_t reg, uint16_t data)
| reg << 18 /* Phy Register */
| 0x02 << 16 /* must be 0x02 for turn around field */
| data);
#if EMAC_DBG
printf("EMAC: Phy 0, Reg %d, Write 0x%04x.\n", reg, data);
#if defined(EMAC_DBG)
printk("EMAC: Phy 0, Reg %d, Write 0x%04x.\n", reg, data);
#endif
/* wait for phy write to complete (was udelay(5000)) */
@@ -277,12 +287,12 @@ int rtems_at91rm9200_emac_attach (
* Is driver free?
*/
if (unitnumber != 0) {
printf ("Bad AT91RM9200 EMAC unit number.\n");
printk ("Bad AT91RM9200 EMAC unit number.\n");
return 0;
}
ifp = &softc.arpcom.ac_if;
if (ifp->if_softc != NULL) {
printf ("Driver already in use.\n");
printk ("Driver already in use.\n");
return 0;
}
@@ -378,7 +388,7 @@ void at91rm9200_emac_init(void *arg)
/* EMAC doesn't support promiscuous, so ignore requests */
if (ifp->if_flags & IFF_PROMISC) {
printf ("Warning - AT91RM9200 Ethernet driver"
printk ("Warning - AT91RM9200 Ethernet driver"
" doesn't support Promiscuous Mode!\n");
}
@@ -458,14 +468,83 @@ void at91rm9200_emac_init_hw(at91rm9200_emac_softc_t *sc)
/* enable the MII interface */
EMAC_REG(EMAC_CTL) = EMAC_CTL_MPE;
/* Set PHY LED2 to combined Link/Activity and enable pulse stretching */
#if csb637
/* Set PHY LED modes. Traffic Meter Mode for ACTLED
* Set Bit 6 - Traffic Mode on
*/
phywrite(0x1b, PHY_AUX_MODE2_TRAFFIC_LED);
{
int timeout;
uint32_t emac_link_status;
#if defined(PHY_DBG)
printk("EMAC: Getting Link Status.\n");
#endif
/* read the PHY ID registers */
emac_link_status = phyread(0x02);
emac_link_status = phyread(0x03);
/* Get the link status - wait for done with a timeout */
for (timeout = 10000 ; timeout ; ) {
for (i = 0; i < 100; i++)
;
emac_link_status = phyread(0x01);
if (!(emac_link_status & PHY_STAT_AUTO_NEG_ABLE)) {
#if defined(PHY_DBG)
printk("EMAC: PHY is unable to Auto-Negotatiate!\n");
#endif
timeout = 0;
break;
}
if (emac_link_status & PHY_STAT_AUTO_NEG_DONE) {
#if defined(PHY_DBG)
printk("EMAC: Auto-Negotiate Complete, Link = ");
#endif
break;
}
timeout-- ;
}
if (!timeout) {
#if defined(PHY_DBG)
printk(
"EMAC: Auto-Negotatiate Failed, Status = 0x%04lx!\n"
"EMAC: Initialization Halted.\n",
emac_link_status
);
#endif
/* if autonegotiation fails, just force to 10HD... */
emac_link_status = PHY_STAT_10BASE_HDX;
}
/* Set SPD and FD based on the return link status */
if (emac_link_status & (PHY_STAT_100BASE_X_FDX | PHY_STAT_100BASE_X_HDX)){
EMAC_REG(EMAC_CFG) |= EMAC_CFG_SPD;
#if defined(PHY_DBG)
printk("100MBIT, ");
#endif
} else {
EMAC_REG(EMAC_CFG) &= ~EMAC_CFG_SPD;
#if defined(PHY_DBG)
printk("10MBIT, ");
#endif
}
if (emac_link_status & (PHY_STAT_100BASE_X_FDX | PHY_STAT_10BASE_FDX)) {
EMAC_REG(EMAC_CFG) |= EMAC_CFG_FD;
#if defined(PHY_DBG)
printk("Full Duplex.\n");
#endif
} else {
EMAC_REG(EMAC_CFG) &= ~EMAC_CFG_FD;
#if defined(PHY_DBG)
printk("Half Duplex.\n");
#endif
}
/* Set PHY LED modes. Traffic Meter Mode for ACTLED
* Set Bit 6 - Traffic Mode on
*/
phywrite(0x1b, PHY_AUX_MODE2_TRAFFIC_LED);
}
#else
/* must be csb337 */
/* Set PHY LED2 to combined Link/Activity and enable pulse stretching */
phywrite( 18, 0x0d0a );
#endif
@@ -540,7 +619,7 @@ void at91rm9200_emac_sendpacket (struct ifnet *ifp, struct mbuf *m)
struct mbuf *l = NULL;
unsigned int pkt_offset = 0;
delay_cnt = 0;
/* printf("at91rm9200_emac_sendpacket %p\n", m); */
/* printk("at91rm9200_emac_sendpacket %p\n", m); */
/* Wait for EMAC Transmit Queue to become available. */
while (((EMAC_REG(EMAC_TSR) & EMAC_TSR_COMP) == 0) &&
@@ -600,11 +679,11 @@ void at91rm9200_emac_rxDaemon(void *arg)
&events);
if (EMAC_REG(EMAC_RSR) & EMAC_RSR_BNA) {
printf("1: EMAC_BNA\n");
printk("1: EMAC_BNA\n");
}
if (EMAC_REG(EMAC_RSR) & EMAC_RSR_OVR) {
printf("1: EMAC_OVR\n");
printk("1: EMAC_OVR\n");
}
/* clear the receive status as we do not use it anyway */
@@ -654,10 +733,10 @@ void at91rm9200_emac_rxDaemon(void *arg)
} /* while ADD_OWNED = 0 */
if (EMAC_REG(EMAC_RSR) & EMAC_RSR_BNA) {
printf("2:EMAC_BNA\n");
printk("2:EMAC_BNA\n");
}
if (EMAC_REG(EMAC_RSR) & EMAC_RSR_OVR) {
printf("2:EMAC_OVR\n");
printk("2:EMAC_OVR\n");
}