Add missing prototypes.

c/src/lib/libbsp/m68k/gen68302/timer/timer.c

@@ -42,7 +42,7 @@ uint32_t         Timer_interrupts;
 
 rtems_boolean Timer_driver_Find_average_overhead;
 
-rtems_isr timerisr();
+rtems_isr timerisr(void);
 
 void Timer_initialize( void )
 {

c/src/lib/libbsp/m68k/gen68340/timer/timer.c

@@ -54,10 +54,10 @@
 
 #define max(a,b) (((a)>(b)) ? (a) : (b))
 
-void (*Restart_Fifo_Full_A_Timer)();
-void (*Restart_Check_A_Timer)();
-void (*Restart_Fifo_Full_B_Timer)();
-void (*Restart_Check_B_Timer)();
+void (*Restart_Fifo_Full_A_Timer)(void);
+void (*Restart_Check_A_Timer)(void);
+void (*Restart_Fifo_Full_B_Timer)(void);
+void (*Restart_Check_B_Timer)(void);
 
 int preload = 0;
 

c/src/lib/libbsp/m68k/idp/clock/ckinit.c

@@ -34,8 +34,8 @@ volatile uint32_t         Clock_driver_ticks;
 rtems_isr_entry  Old_ticker;
 
 extern rtems_configuration_table Configuration;
-extern void led_putnum();
-void Disable_clock();
+extern void led_putnum(void);
+void Disable_clock(void);
 
 #define CLOCK_VECTOR 0x4D
 
@@ -83,14 +83,14 @@ rtems_isr Clock_isr(
     Clock_isrs -= 1;
 }
 
-void Disable_clock()
+void Disable_clock(void)
 {
 	/* Disable timer */
 	MC68230_WRITE (MC68230_TCR, 0x00);
 }
 
-void Install_clock( clock_isr )
-rtems_isr_entry clock_isr;
+void Install_clock(
+  rtems_isr_entry clock_isr )
 {
   Clock_driver_ticks = 0;
   Clock_isrs = (int)(Configuration.microseconds_per_tick / 1000);

c/src/lib/libbsp/m68k/idp/console/leds.c

@@ -6,8 +6,8 @@
  */
 #include "leds.h"
 
-void zylons();
-void clear_leds();
+void zylons(void);
+void clear_leds(void);
 
 /*
  * led_putnum --

c/src/lib/libbsp/m68k/idp/console/mc68ec.c

@@ -11,8 +11,7 @@
  * rtems_bsp_delay -- delay execution. This is an ugly hack. It should
  *          use the timer, but I'm waiting for docs. (sigh)
  */
-void rtems_bsp_delay(num)
-int num;
+void rtems_bsp_delay(int num)
 {
   while (num--)
     {

c/src/lib/libbsp/m68k/idp/startup/bspstart.c

@@ -25,7 +25,7 @@ extern struct duart_regs duart_info;
 
 #define DELAY 5000
 
-void led_putnum();
+void led_putnum(void);
 
 /*
  *  Use the shared implementations of the following routines

c/src/lib/libbsp/m68k/idp/timer/timer.c

@@ -34,9 +34,9 @@
 int Ttimer_val;
 rtems_boolean Timer_driver_Find_average_overhead;
 
-rtems_isr timerisr();
+rtems_isr timerisr(void);
 
-void Timer_initialize()
+void Timer_initialize(void)
 {
   (void) set_vector( timerisr, TIMER_VECTOR, 0 );  /* install ISR */
 
@@ -64,7 +64,7 @@ void Timer_initialize()
 #define AVG_OVERHEAD      9  /* may not be right -- do this later */
 #define LEAST_VALID       10 /* Don't trust a value lower than this */
 
-int Read_timer()
+int Read_timer(void)
 {
   uint8_t         data;
   uint8_t          msb, osb, lsb;

c/src/lib/libbsp/m68k/mvme136/startup/bspclean.c

@@ -16,7 +16,7 @@
 #include <rtems/clockdrv.h>
 #include <rtems/zilog/z8036.h>
 
-void bsp_return_to_monitor_trap()
+void bsp_return_to_monitor_trap(void)
 {
   extern void start( void  );
 

c/src/lib/libbsp/m68k/mvme136/timer/timer.c

@@ -31,9 +31,9 @@
 int Ttimer_val;
 rtems_boolean Timer_driver_Find_average_overhead;
 
-rtems_isr timerisr();
+rtems_isr timerisr(void);
 
-void Timer_initialize()
+void Timer_initialize(void)
 {
   (void) set_vector( timerisr, 66, 0 );       /* install ISR */
 
@@ -65,7 +65,7 @@ void Timer_initialize()
                              /* (6 countdowns) to start/stop the timer. */
 #define LEAST_VALID       10 /* Don't trust a value lower than this */
 
-int Read_timer()
+int Read_timer(void)
 {
 /*
   uint8_t          msb, lsb;