RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

2011-08-01 Sebastian Huber <sebastian.huber@embedded-brains.de>

Browse Source 
* include/.cvsignore: New file.
	* include/bspopts.h.in: Removed file.
This commit is contained in:
Sebastian Huber
2011-08-01 06:36:37 +00:00
parent 96a0c2ae3f
commit 3ca8c6bc11
3 changed files with 9 additions and 106 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
c/src/lib/libbsp/arm/lpc32xx/ChangeLog
View File

@@ -1,3 +1,8 @@
2011-08-01 Sebastian Huber <sebastian.huber@embedded-brains.de>
* include/.cvsignore: New file.
* include/bspopts.h.in: Removed file.
2011-07-04 Sebastian Huber <sebastian.huber@embedded-brains.de>
* misc/nand-mlc-erase-block-safe.c, misc/nand-mlc-write-blocks.c,

4
c/src/lib/libbsp/arm/lpc32xx/include/.cvsignore Normal file
View File

@@ -0,0 +1,4 @@
stamp-h
stamp-h.in
bspopts.h
bspopts.h.in

106
c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in
View File

@@ -1,106 +0,0 @@
/* include/bspopts.h.in. Generated from configure.ac by autoheader. */
/* If defined, then the BSP Framework will put a non-zero pattern into the
RTEMS Workspace and C program heap. This should assist in finding code that
assumes memory starts set to zero. */
#undef BSP_DIRTY_MEMORY
/* If defined, print a message and wait until pressed before resetting board
when application exits. */
#undef BSP_PRESS_KEY_FOR_RESET
/* If defined, reset the board when the application exits. */
#undef BSP_RESET_BOARD_AT_EXIT
/* disable testsuite samples with high memory demands */
#undef BSP_SMALL_MEMORY
/* reset vector address for BSP start */
#undef BSP_START_RESET_VECTOR
/* ARM clock in Hz */
#undef LPC32XX_ARM_CLK
/* clock configuration for UART 3 */
#undef LPC32XX_CONFIG_U3CLK
/* clock configuration for UART 4 */
#undef LPC32XX_CONFIG_U4CLK
/* clock configuration for UART 5 */
#undef LPC32XX_CONFIG_U5CLK
/* clock configuration for UART 6 */
#undef LPC32XX_CONFIG_U6CLK
/* clock mode configuration for UARTs */
#undef LPC32XX_CONFIG_UART_CLKMODE
/* disable MMU */
#undef LPC32XX_DISABLE_MMU
/* disable MMU protection of read-only sections */
#undef LPC32XX_DISABLE_READ_ONLY_PROTECTION
/* disable cache for read-write data sections */
#undef LPC32XX_DISABLE_READ_WRITE_DATA_CACHE
/* bsp_reset() will use the watchdog to reset the chip */
#undef LPC32XX_ENABLE_WATCHDOG_RESET
/* enable RMII for Ethernet */
#undef LPC32XX_ETHERNET_RMII
/* AHB bus clock in Hz */
#undef LPC32XX_HCLK
/* main oscillator frequency in Hz */
#undef LPC32XX_OSCILLATOR_MAIN
/* RTC oscillator frequency in Hz */
#undef LPC32XX_OSCILLATOR_RTC
/* peripheral clock in Hz */
#undef LPC32XX_PERIPH_CLK
/* size of scratch area */
#undef LPC32XX_SCRATCH_AREA_SIZE
/* stop Ethernet controller at start-up to avoid DMA interference */
#undef LPC32XX_STOP_ETHERNET
/* stop general purpose DMA at start-up to avoid DMA interference */
#undef LPC32XX_STOP_GPDMA
/* stop USB controller at start-up to avoid DMA interference */
#undef LPC32XX_STOP_USB
/* baud for UART 1 */
#undef LPC32XX_UART_1_BAUD
/* baud for UART 2 */
#undef LPC32XX_UART_2_BAUD
/* baud for UART 7 */
#undef LPC32XX_UART_7_BAUD
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* tests use printk() for output */
#undef TESTS_USE_PRINTK