Patch from Ralf Corsepius <corsepiu@faw.uni-ulm.de>:

Please find enclosed a patch which enables me to build the bare-bsp for
    sh-rtems.

    Changes:
        1. Add preinstall to libbsp/bare/include/Makefile.in
        2. Removed FORCEIT, add preinstall to
        libbsp/sh/gensh1/include/Makefile.in
        3. Disabled support of set_vector from sh code (shared/setvec.c is still
        present but isn't used anymore), set_vector replaced with standard rtems
        functions.

    Problems still present:
        1. Support of spin-delays in bare bsp
        2. Proper support of cpu frequency

    To configure I used:
        <srcdir>/configure \
        --target=sh-rtems \
        --prefix=<instdir>/sh-bare \
        --enable-bare-cpu-model=sh7032 \
        --enable-bare-cpu-cflags='-Wall -m1 -DMHZ=20
        -DCPU_CONSOLE_DEVNAME="\"/dev/null\""'
        --enable-rtemsbsp=bare \
        --disable-networking \
        --disable-cxx \
        --disable-posix \
        --disable-tests

    IMO, if there are no objections to this patch, a similar approach should
    be applied to all CPUs/BSPs (esp. hppa1.1, mips64orion, ppc403, because
    they apply set_vector inside of libcpu).

c/src/lib/libbsp/bare/include/Makefile.in

@@ -28,6 +28,7 @@ include $(RTEMS_ROOT)/make/leaf.cfg
 CLEAN_ADDITIONS +=
 CLOBBER_ADDITIONS +=
 
-all:	$(SRCS)
-	$(INSTALL) -m 444 $(H_FILES) $(PROJECT_INCLUDE)
-	$(INSTALL) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE)
+all:	preinstall
+
+preinstall: $(SRCS)
+	@INSTALL@ $(INSTINCFLAGS) $(H_FILES) $(PROJECT_INCLUDE)

c/src/lib/libbsp/sh/gensh1/include/Makefile.in

@@ -30,8 +30,7 @@ include $(RTEMS_ROOT)/make/leaf.cfg
 CLEAN_ADDITIONS +=
 CLOBBER_ADDITIONS +=
 
-all: 	$(SRCS)
-	$(INSTALL) -m 444 $(H_FILES) $(PROJECT_INCLUDE)
-	$(INSTALL) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE)
+all: 	preinstall
 
-install: all
+preinstall: $(SRCS)
+	@INSTALL@ $(INSTINCFLAGS) $(H_FILES) $(PROJECT_INCLUDE)

c/src/lib/libbsp/sh/gensh1/include/bsp.h

@@ -55,7 +55,11 @@ extern "C" {
 
 #define MUST_WAIT_FOR_INTERRUPT 0
 
-#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )
+#define Install_tm27_vector( handler ) \
+{ \
+  rtems_isr_entry ignored ; \
+  rtems_interrupt_catch( (handler), 0, &ignored ) ; \
+}
 
 #define Cause_tm27_intr()
 
@@ -110,12 +114,14 @@ extern void bsp_cleanup( void );
 /*
  * FIXME: Should this go to libcpu/sh/sh7032 ?
  */
+#if 0
 /* functions */
 sh_isr_entry set_vector(                    /* returns old vector */
   rtems_isr_entry     handler,                  /* isr routine        */
   rtems_vector_number vector,                   /* vector number      */
   int                 type                      /* RTEMS or RAW intr  */
 );
+#endif
 
 #ifdef __cplusplus
 }

c/src/lib/libbsp/sh/gensh1/startup/Makefile.in

@@ -11,7 +11,7 @@ PROJECT_ROOT = @PROJECT_ROOT@
 PGM=${ARCH}/startup.rel
 
 # C source names, if any, go here -- minus the .c
-C_PIECES=bsplibc bsppost bspstart bspclean sbrk setvec main
+C_PIECES=bsplibc bsppost bspstart bspclean sbrk main
 C_FILES=$(C_PIECES:%=%.c)
 C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
 

c/src/lib/libbsp/sh/shared/setvec.c

@@ -1,4 +1,8 @@
 /*  set_vector
+ *
+ *  NOTE: This function is considered OBSOLETE and may vanish soon.
+ *	Calls to set_vector should be replaced by calls to 
+ *	rtems_interrupt_catch or _CPU_ISR_install_raw_handler.
  *
  *  This routine installs an interrupt vector on the target Board/CPU.
  *  This routine is allowed to be as board dependent as necessary.
@@ -52,4 +56,3 @@ sh_isr_entry set_vector(      		/* returns old vector */
 
   return previous_isr;
 }
-

c/src/lib/libcpu/sh/sh7032/clock/ckinit.c

@@ -152,7 +152,7 @@ void Install_clock(
    */
 
   if ( BSP_Configuration.ticks_per_timeslice ) {
-    Old_ticker = (rtems_isr_entry) set_vector( Clock_isr, CLOCK_VECTOR, 1 );
+    rtems_interrupt_catch( Clock_isr, CLOCK_VECTOR, &Old_ticker );
     /*
      *  Hardware specific initialize goes here
      */
@@ -280,8 +280,10 @@ rtems_device_driver Clock_control(
 	}
       else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
 	{
+	  rtems_isr_entry	ignored ;
 	  rtems_interrupt_disable( isrlevel );
-	  (void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
+	  rtems_interrupt_catch( args->buffer, CLOCK_VECTOR, &ignored );
+	  
 	  rtems_interrupt_enable( isrlevel );
 	}
     }

c/src/lib/libcpu/sh/sh7032/include/Makefile.in

@@ -26,6 +26,3 @@ all:	install
 install:
 	test -d $(PROJECT_INCLUDE)/sh || $(MKDIR) $(PROJECT_INCLUDE)/sh 
 	$(INSTALL) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/sh
-
-all: FORCEIT
-	cd ../../../../libbsp/$(RTEMS_CPU)/$(RTEMS_BSP)/include; $(MAKE) all

c/src/lib/libcpu/sh/sh7032/timer/timer.c

@@ -62,10 +62,10 @@ rtems_boolean Timer_driver_Find_average_overhead;
 
 void Timer_initialize( void )
 {
-  rtems_unsigned8 temp8;
+  rtems_unsigned8  temp8;
   rtems_unsigned16 temp16;
   rtems_unsigned32 level;
-  rtems_isr* ignored;
+  rtems_isr	   *ignored;
 
   /*
    *  Timer has never overflowed.  This may not be necessary on some
@@ -117,7 +117,7 @@ void Timer_initialize( void )
   write16( temp16, INTC_IPRC);
 
   /* initialize ISR */
-  ignored = set_vector( timerisr, ITU1_VECTOR, 0);
+  _CPU_ISR_install_raw_handler( ITU1_VECTOR, timerisr, &ignored );
   _CPU_ISR_Enable( level);
 
   /* start timer 1 */