RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity

2007-06-20 Joel Sherrill <joel.sherrill@oarcorp.com>

Browse Source 
* shared/uboot_dump_bdinfo.c: New file.
This commit is contained in:
Joel Sherrill
2007-06-20 21:42:24 +00:00
parent 7da34053e7
commit 19b4789367
2 changed files with 88 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
c/src/lib/libbsp/powerpc/ChangeLog
View File

@@ -1,3 +1,7 @@
2007-06-20 Joel Sherrill <joel.sherrill@oarcorp.com>
* shared/uboot_dump_bdinfo.c: New file.
2007-04-17 Joel Sherrill <joel@OARcorp.com>
* psim/tools/runtest: Do not run pppd.exe from batch mode script.

84
c/src/lib/libbsp/powerpc/shared/uboot_dump_bdinfo.c Normal file
View File

@@ -0,0 +1,84 @@
/*
* COPYRIGHT (c) 1989-2007.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* $Id$
*/
#include <bsp.h>
#include <rtems/bspIo.h>
/*
* This file should only be compiled if the BSP has U-Boot.
* In addition, this function does not support every PowerPC
* CPU model listed in the bd_t structure. Users are encouraged
* to augment this code. The following #error should be fixed
* as more CPU models are supported.
*/
#if defined(HAS_UBOOT)
#if !defined(CONFIG_MPC5xxx)
#error "dumpUBootDBInfo: unsupported configuration!!"
#endif
/*
* Dump U-Boot Board Information Structure
*
* u - pointer to information structure
*/
void dumpUBootBDInfo(
bd_t *u
)
{
if ( u == (bd_t *)1 ) {
printk( "UBoot BD Info Ptr NOT Set\n" );
return;
}
printk(
"*** U-Boot Information ***\n"
"Start/Size of DRAM memory = %p for %lx\n"
"Start/Size of Flash memory = %p for %lx\n"
"Reserved area for startup monitor = %ld\n"
"Start/Size of SRAM memory = %p for %ld\n"
"Boot/Reboot flag = %ld\n"
"IP Address = %d:%d:%d:%d\n"
"Ethernet address = %02x:%02x:%02x:%02x:%02x:%02x\n"
"Ethernet speed in Mbps = %d\n"
"Internal Freq, in MHz = %ld\n"
"Bus Freq, in MHz = %ld\n"
"Console Baud Rate = %ld\n"
#if defined(CONFIG_MPC5xxx)
"MBAR = %p\n"
"IPB Bus Freq, in MHz = %ld\n"
"PCI Bus Freq, in MHz = %ld\n"
#endif
,
u->bi_memstart, u->bi_memsize,
u->bi_flashstart, u->bi_flashsize,
u->bi_flashoffset,
u->bi_sramstart, u->bi_sramsize,
u->bi_bootflags,
((u->bi_ip_addr >> 24) & 0xff), ((u->bi_ip_addr >> 16) & 0xff),
((u->bi_ip_addr >> 8) & 0xff), (u->bi_ip_addr & 0xff),
u->bi_enetaddr[0], u->bi_enetaddr[1], u->bi_enetaddr[2],
u->bi_enetaddr[3], u->bi_enetaddr[4], u->bi_enetaddr[5],
u->bi_ethspeed,
u->bi_intfreq,
u->bi_busfreq,
u->bi_baudrate
#if defined(CONFIG_MPC5xxx)
,
u->bi_mbar_base,
u->bi_ipbfreq,
u->bi_pcifreq
#endif
);
}
#endif