Upgrade to 4.10.2

* math/init.c, mathf/init.c: Use DEVFS since we do have devices.

ChangeLog

@@ -1,3 +1,26 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
+2010-12-16	Joel Sherrill <joel.sherrilL@OARcorp.com>
+
+	* SUPPORT: Update address.
+
+2010-09-27	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* README.configure: Cleanup.
+
+2010-06-23	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: autoconf >= 2.65, automake >= 1.11.
+
+2010-06-14	Joel Sherrill <joel.sherrilL@OARcorp.com>
+
+	PR 1553/filesystem
+	Coverity Id 37
+	* libblock/src/flashdisk.c: Fix two paths which should have returned an
+	error but did not have the return statement.
+
 2010-05-11	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* aclocal/bsp-alias.m4: Change quoting to work-round

README.configure

@@ -11,24 +11,20 @@ tools in the Cygnus one-tree structure. Using autoconf also means
 that RTEMS now can be built in a separate build directory.
 
 To re-generate auto*tool generated files (configure, Makefile.in etc),
-autoconf-2.59 and automake-1.8 are required.
+autoconf-2.68 and automake-1.11.1 are required.
 
 2. Installation
 ===============
 
-2.1 Standalone build
-
 To configure RTEMS for a specific target, run configure in the build
 directory. In addition to the standard configure options, the following
 RTEMS-specific option are supported:
 
       --disable-rtems-inlines
       --disable-posix
-      --disable-itron
+      --enable-itron
       --disable-networking
       --enable-cxx
-      --enable-bare-cpu-model=<MODEL>
-      --enable-bare-cpu-cflags=<FLAGS>
       --enable-multiprocessing
       --enable-rtemsbsp="bsp1 bsp2 ..."
       --enable-tests
@@ -88,8 +84,6 @@ within a target architecture.  Remember that the target specifies the
 CPU family while the BSP specifies the precise board you will be using. 
 The following targets are supported:
 
-      (none)	will build the host-based version on Linux, Solaris and HPUX.
-
       arm-rtems4.10
       avr-rtems4.10
       bfin-rtems4.10
@@ -104,7 +98,6 @@ The following targets are supported:
       powerpc-rtems4.10
       sh-rtems4.10
       sparc-rtems4.10
-      bare                    see notes
 
 The cross-compiler is set to $(target)-gcc by default.
 
@@ -116,7 +109,7 @@ Installation is done under $(prefix)/rtems.
 
 As an example, to build and install the mvme136 and mvme162 bsps for m68k do:
 
-      (path_to_rtems_src)/configure --target=m68k-rtems
+      (path_to_rtems_src)/configure --target=m68k-rtems4.10
 
       make RTEMS_BSP="mvme136 mvme162"
       
@@ -128,19 +121,6 @@ test suite.
 
 Documentation is built separately from the source code.
 
-2.2 Target Dependent Notes
-
-bare:
-
-1.  See the README in the bare bsp source directory. This should
-    contain all info you need.
-2.  The bare bsp source contains a script to show how to build it.
-3.  The configure flags must be used to get the bare bsp to work.
-    The --enable-bare-cpu-model and --enable-bare-cpu-cflags are the
-    only pieces of information. The module is usually a gcc module
-    such as m68302 or mcpu32. The flags are passed directly to gcc.
-    Use "" if more than one option is specified.
-
 3. To use the installed RTEMS library
 =====================================
 
@@ -162,8 +142,6 @@ following:
 
 The following bsps are supported:
 
-host-based	: posix (on Linux, FreeBSD, Cygwin, Solaris, and HPUX)
-
 arm             : csb336 csb337 edb7312 gba gp32 nds rtl22x rtl22xx_t
                   smdk2410
 
@@ -171,8 +149,6 @@ avr:            : avrtest
 
 bfin            : eZKit533 bf537Stamp
 
-c4x             : c3xsim c4xsim
-
 h8300           : h8sim
 
 i386		: i386ex pc386 pc386dx pc486 pc586 pc686 pck6 ts_386ex
@@ -215,12 +191,6 @@ sh              : gensh1 gensh2 gensh4 simsh1 simsh2 simsh4
 
 sparc 		: erc32 sis leon2 leon3
 
-any             : bare
-
-The following ports were considered obsoleted after the 4.6 releases
-and were removed: a29k, hppa, i960, mips64orion, and or32.
-
-
 5. Makefile structure
 =====================
 
@@ -248,13 +218,6 @@ Please refer to the BSP and Device Driver Guide.
 
 All gnu-based bsps have been built on Linux. 
 
-The native (posix) ports have been built and run only on Linux.
-
-The following configurations have NOT been tested:
-
-    + Anything on Nextstep, HPUX and Irix.
-    + The C4x and OR32 ports (requires specially patched toolchain)
-
 8. Prerequisites
 ================
 

SUPPORT

@@ -8,12 +8,12 @@ includes porting RTEMS to new processors and the development of custom board
 support packages and device drivers.   In addition, OAR is available
 to assist in the development of your real-time embedded application.
 
-For more information, email Mark Johannes at mark.johannes@OARcorp.com 
+For more information, email Joel Sherrill joel.sherrill@OARcorp.com 
 or contact OAR at:
 
 On-Line Applications Research Corporation
-4910-L Corporate Drive
-Huntsville AL 35805
+7047 Old Madison Pike Suite 320
+Huntsville AL 35806
 Voice: (205) 722-9985
 Fax:   (205 722-0985
 

VERSION

@@ -4,4 +4,4 @@
 #  $Id$
 #
 
-RTEMS Version 4.9.99.0
+RTEMS Version 4.10.2

aclocal/version.m4

@@ -1,4 +1,4 @@
 AC_DEFUN([RTEMS_VERSIONING],
-m4_define([_RTEMS_VERSION],[4.9.99.0]))
+m4_define([_RTEMS_VERSION],[4.10.2]))
 
 m4_define([RTEMS_API],[4.10])

bspkit/README

@@ -1,6 +0,0 @@
-WARNING
-=======
-
-All files in here are considered to be unstable and experimental.
-
-They are subject to change at any time without prior notice.

bspkit/avr/bare/ChangeLog

@@ -1,8 +0,0 @@
-2008-09-18	Joel Sherrill <joel.sherrill@OARcorp.com>
-
-	* cfg/bare-avr3.cfg, cfg/bare-avr5.cfg: Eliminate START_BASE and
-	START_FILE.
-
-2004-10-22	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* cfg/bare-avr3.cfg, cfg/bare-avr5.cfg: New.

bspkit/avr/bare/cfg/bare-avr3.cfg

@@ -1,36 +0,0 @@
-# 
-#  Config file for the "bare" BSP
-#
-#  $Id$
-#
-
-# This is the actual bsp directory used during the build process.
-RTEMS_BSP_FAMILY=bare
-
-RTEMS_CPU_MODEL=avr3
-
-CPU_CFLAGS=-mmcu=avr3
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-# optimize flag: typically -0, could use -O4 or -fast
-# -O4 is ok for RTEMS
-CFLAGS_OPTIMIZE_V=-Os -fomit-frame-pointer
-
-# The following are definitions of make-exe which will work using ld as
-# is currently required.  It is expected that as of gcc 2.8, the end user
-# will be able to override parts of the compilers specs and link using gcc.
-
-define make-exe
-	@echo "*** Cannot do a link with the bare bsp. ***"
-        @echo "#!/bin/sh" > $(basename $@).exe
-        @echo "echo \"Cannot do a link with the bare bsp.\"" >> $(basename $@).exe
-endef
-
-define make-cxx-exe
-	@echo "*** Cannot do a link with the bare bsp. ***"
-        @echo "#!/bin/sh" > $(basename $@).exe
-        @echo "echo \"Cannot do a link with the bare bsp.\"" >> $(basename $@).exe
-endef
-
-# Miscellaneous additions go here

bspkit/avr/bare/cfg/bare-avr5.cfg

@@ -1,36 +0,0 @@
-# 
-#  Config file for the "bare" BSP
-#
-#  $Id$
-#
-
-# This is the actual bsp directory used during the build process.
-RTEMS_BSP_FAMILY=bare
-
-RTEMS_CPU_MODEL=avr5
-
-CPU_CFLAGS=-mmcu=avr5
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-# optimize flag: typically -0, could use -O4 or -fast
-# -O4 is ok for RTEMS
-CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
-
-# The following are definitions of make-exe which will work using ld as
-# is currently required.  It is expected that as of gcc 2.8, the end user
-# will be able to override parts of the compilers specs and link using gcc.
-
-define make-exe
-	@echo "*** Cannot do a link with the bare bsp. ***"
-        @echo "#!/bin/sh" > $(basename $@).exe
-        @echo "echo \"Cannot do a link with the bare bsp.\"" >> $(basename $@).exe
-endef
-
-define make-cxx-exe
-	@echo "*** Cannot do a link with the bare bsp. ***"
-        @echo "#!/bin/sh" > $(basename $@).exe
-        @echo "echo \"Cannot do a link with the bare bsp.\"" >> $(basename $@).exe
-endef
-
-# Miscellaneous additions go here

c/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2009-10-21	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* configure.ac: Remove reference to bare BSP.

c/configure.ac

@@ -2,14 +2,14 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([TOOL_TARGETS])
 RTEMS_TOP(..)
 
 RTEMS_CANONICAL_TARGET_CPU
 
-AM_INIT_AUTOMAKE([no-define foreign 1.10])
+AM_INIT_AUTOMAKE([no-define foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 ## These options are used within this file.

c/src/ChangeLog

@@ -1,3 +1,25 @@
+2011-11-09	Jennifer Averett <jennifer.averett@oarcorp.com>
+
+	PR 1934/bsps
+	* libchip/serial/ns16550.c: Change to unsigned variable.
+
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
+2011-01-19	Joel Sherrill <joel.sherrilL@OARcorp.com>
+
+	* libchip/ide/ata.c: Fix spelling.
+
+2010-06-14	Arnout Vandecappelle <arnout@mind.be>
+
+	PR 1557/misc
+	* libchip/i2c/spi-sd-card.c: Fixed low capacity special case.
+
+2010-06-09	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* aclocal/rtems-cpu-subdirs.m4: Remove nios2.
+
 2010-06-03	Joel Sherrill <joel.sherrilL@OARcorp.com>
 
 	* libchip/network/if_dc.c: Fix warning.

c/src/aclocal/rtems-cpu-subdirs.m4

@@ -20,7 +20,6 @@ _RTEMS_CPU_SUBDIR([m32c],[$1]);;
 _RTEMS_CPU_SUBDIR([m32r],[$1]);;
 _RTEMS_CPU_SUBDIR([m68k],[$1]);;
 _RTEMS_CPU_SUBDIR([mips],[$1]);;
-_RTEMS_CPU_SUBDIR([nios2],[$1]);;
 _RTEMS_CPU_SUBDIR([no_cpu],[$1]);;
 _RTEMS_CPU_SUBDIR([powerpc],[$1]);;
 _RTEMS_CPU_SUBDIR([sh],[$1]);;

c/src/aclocal/version.m4

@@ -1,4 +1,4 @@
 AC_DEFUN([RTEMS_VERSIONING],
-m4_define([_RTEMS_VERSION],[4.9.99.0]))
+m4_define([_RTEMS_VERSION],[4.10.2]))
 
 m4_define([RTEMS_API],[4.10])

c/src/ada-tests/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2009-12-14	Joel Sherrill <joel.sherrill@oarcorp.com>
 
 	* mptests/mp01/node1/mp01_node1.adb, mptests/mp01/node2/mp01_node2.adb,

c/src/ada-tests/configure.ac

@@ -2,14 +2,14 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.59)
+AC_PREREQ([2.68])
 AC_INIT([rtems-ada-tests],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([support])
 RTEMS_TOP([../../..],[])
 
 RTEMS_CANONICAL_TARGET_CPU
 
-AM_INIT_AUTOMAKE([no-define foreign 1.9])
+AM_INIT_AUTOMAKE([no-define foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 AC_CHECK_PROGS([M4],[gm4 m4])

c/src/configure.ac

@@ -2,7 +2,7 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([optman])
 RTEMS_TOP(../..)
@@ -12,7 +12,7 @@ RTEMS_ENABLE_NETWORKING
 
 RTEMS_CANONICAL_TARGET_CPU
 
-AM_INIT_AUTOMAKE([no-define subdir-objects no-exeext foreign 1.10])
+AM_INIT_AUTOMAKE([no-define subdir-objects no-exeext foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 RTEMS_ENABLE_MULTILIB

c/src/lib/libbsp/ChangeLog

@@ -1,3 +1,29 @@
+2011-05-18	Till Straumann <strauman@slac.stanford.edu>
+
+	PR1797/bsps
+	* shared/bootcard.c: Fixed a typo (in code, not comment) which
+	I introduced with the last change.
+
+2011-05-17	Till Straumann <strauman@slac.stanford.edu>
+
+	PR1797/bsps
+	* shared/bootcard.c, shared/include/bootcard.h: cleaned-up and
+	applied fixes proposed by PR#1797.
+
+2011-05-12  Joel Sherrill <joel.sherrill@OARcorp.com>  
+
+	PR1797/bsps
+	* bootcard.c:
+	Added #ifdef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK to minimize code
+	for small targets.
+
+2011-05-12  Kate Feng <feng@bnl.gov>
+	
+	PR1797/bsps
+	* bootcard.c:
+	Fixed the value of heap_start & heap_size for the single-heap case.
+	Added bsp_sbrk_init() to fix PPC memory allocation beyond 32 MB.
+
 2010-04-14	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* shared/umon/umoncons.c:

c/src/lib/libbsp/arm/ChangeLog

@@ -1,3 +1,13 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
+2010-11-23	Gedare Bloom <giddyup44@yahoo.com>
+
+	PR 1719/cpukit
+	* shared/start/start.S: Avoid "bx" instruction to support ARMv4 and
+	below.
+
 2010-05-20	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* shared/include/start.h: Define start section attributes.

c/src/lib/libbsp/arm/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([../arm])
 RTEMS_TOP(../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define foreign 1.10])
+AM_INIT_AUTOMAKE([no-define foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 RTEMS_ENV_RTEMSBSP

c/src/lib/libbsp/arm/csb336/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-04-30	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* Makefile.am, preinstall.am: Added generic interrupt support modules.

c/src/lib/libbsp/arm/csb336/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## configure.ac,v 1.5 2003/03/11 09:39:07 ralf Exp
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-csb336],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/csb337/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-04-30	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* Makefile.am, preinstall.am: Added generic interrupt support modules.

c/src/lib/libbsp/arm/csb337/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## configure.ac,v 1.5 2003/03/11 09:39:07 ralf Exp
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-csb337],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/edb7312/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-04-30	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* irq/bsp_irq_init.c: Removed file.

c/src/lib/libbsp/arm/edb7312/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-edb7312],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/gba/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-04-30	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* irq/irq_asm.S, irq/irq_init.c, irq/bsp_irq_asm.S,

c/src/lib/libbsp/arm/gba/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-gba],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/gdbarmsim/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-05-15	Joel Sherrill <joel.sherrilL@OARcorp.com>
 
 	* startup/syscalls.c: Rename to avoid conflict with newlib.

c/src/lib/libbsp/arm/gdbarmsim/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## configure.ac,v 1.5 2003/03/11 09:39:07 ralf Exp
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-gdbarmsim],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/gp32/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-04-30	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* Makefile.am, preinstall.am: Added generic interrupt support modules.

c/src/lib/libbsp/arm/gp32/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## configure.ac,v 1.5 2003/03/11 09:39:07 ralf Exp
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-gp32],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/gumstix/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-05-14	Joel Sherrill <joel.sherrilL@OARcorp.com>
 
 	* rtl8019/rtl8019.c: Fix typo.

c/src/lib/libbsp/arm/gumstix/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## configure.ac,v 1.5 2003/03/11 09:39:07 ralf Exp
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-gumstix],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/lpc24xx/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-05-20	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* startup/bspstarthooks.c: Removed start section attribute defines.

c/src/lib/libbsp/arm/lpc24xx/configure.ac

@@ -5,13 +5,13 @@
 # @brief Configure script of LibBSP for the LPC24XX boards.
 #
 
-AC_PREREQ(2.59)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-lpc24xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/lpc32xx/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-05-25	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* configure.ac, include/bspopts.h.in: Added BSP_SMALL_MEMORY option.

c/src/lib/libbsp/arm/lpc32xx/configure.ac

@@ -5,13 +5,13 @@
 # @brief Configure script of LibBSP for the LPC32XX boards.
 #
 
-AC_PREREQ(2.59)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-lpc32xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/nds/ChangeLog

@@ -1,3 +1,14 @@
+2011-08-15	Julien Delange <julien.delange@gmail.com>
+
+	* irq/irq.c: Removed printk() before the interrupt initialization
+	because it somehow destroys the interrupt context.
+	* make/custom/nds.cfg: Enable Thumb interwork.
+	* startup/bspstart.c: Set default exception handler.
+
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-05-20	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* make/dswifi/arm9/makefile: Workaround for GCC bug 38644.

c/src/lib/libbsp/arm/nds/configure.ac

@@ -2,13 +2,13 @@
 ## $Id$
 ##
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-nds],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/nds/irq/irq.c

@@ -34,8 +34,6 @@ isValidInterrupt (int irq)
 void
 BSP_rtems_irq_mngt_init (void)
 {
-  printk ("[+] irq manager started\n");
-
   irqInit ();
 
   REG_IME = IME_ENABLE;

c/src/lib/libbsp/arm/nds/make/custom/nds.cfg

@@ -13,7 +13,7 @@ RTEMS_CPU_MODEL=arm9tdmi
 #  and (hopefully) optimize for it.
 #
 CPU_CFLAGS = -mstructure-size-boundary=8 -mcpu=$(RTEMS_CPU_MODEL) -mfpu=vfp -mfloat-abi=soft
-# CPU_CFLAGS += -mthumb-interwork ## -D __THUMB_INTERWORK__ -mthumb
+CPU_CFLAGS += -mthumb-interwork ## -D __THUMB_INTERWORK__ -mthumb
 
 # optimize flag: typically -O2
 #CFLAGS_OPTIMIZE_V = -O0 -ggdb

c/src/lib/libbsp/arm/nds/startup/bspstart.c

@@ -15,6 +15,7 @@
 #include <bsp/bootcard.h>
 #include <nds.h>
 
+extern void defaultExceptionHandler ();
 extern void BSP_rtems_irq_mngt_init (void);
 /*
  * start the platform.
@@ -44,6 +45,8 @@ void bsp_start (void)
 
   /* configure clock period */
   Configuration.microseconds_per_tick = 10000;  /* us */
+
+  defaultExceptionHandler ();
 }
 
 /*

c/src/lib/libbsp/arm/nds/tools/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2009-12-07	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* ndstool/source/ndsextract.cpp: Add missing const's.

c/src/lib/libbsp/arm/nds/tools/configure.ac

@@ -2,7 +2,7 @@
 ## $Id$
 ##
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-nds-tools],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([runtest])
 RTEMS_TOP(../../../../../../..)
@@ -15,7 +15,7 @@ AC_PROG_CXX
 
 ## RTEMS_CANONICAL_TARGET_CPU
 
-AM_INIT_AUTOMAKE([no-define foreign 1.10])
+AM_INIT_AUTOMAKE([no-define foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 RTEMS_ENV_RTEMSBSP

c/src/lib/libbsp/arm/rtl22xx/ChangeLog

@@ -1,3 +1,13 @@
+2011-07-22	Joel Sherrill <joel.sherrilL@OARcorp.com>
+
+	PR 1845/bsps
+	* make/custom/rtl22xx_t.cfg: Remove unused line with what is now
+	invalid syntax.
+
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-05-20	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* make/custom/rtl22xx_t.cfg: Workaround for GCC bug 38644.

c/src/lib/libbsp/arm/rtl22xx/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.59)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-rtl22xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/arm/rtl22xx/make/custom/rtl22xx_t.cfg

@@ -3,16 +3,13 @@
 #
 #  $Id$
 #
-set USE_THUMB_MODE=YES
-
 #  This contains the compiler options necessary to select the CPU model
 #  and (hopefully) optimize for it. 
 #
 
 include $(RTEMS_ROOT)/make/custom/rtl22xx.cfg
 
-CPU_CFLAGS +=  -mthumb \
-	-fno-schedule-insns2
+CPU_CFLAGS +=  -mthumb -fno-schedule-insns2
 
 #CFLAG: -mthumb-interwork can add veneer between ARM and Thumb code. 
 #CPU_CFLAGS += -mthumb-interwork -D __THUMB_INTERWORK__ -mthumb

c/src/lib/libbsp/arm/shared/start/start.S

@@ -199,12 +199,20 @@ DEFINE_FUNCTION_ARM(bsp_start_memcpy)
 
 	/* Return if dest == src */
 	cmp	r0, r1
+#ifdef __thumb__
 	bxeq	lr
+#else
+	moveq	pc, lr
+#endif
 
 	/* Return if length is zero */
 	mov	r3, #0
 	cmp	r3, r2
+#ifdef __thumb__
 	bxeq	lr
+#else
+	moveq	pc, lr
+#endif
 
 	/* Save non-volatile registers */
 	push	{r4-r8, lr}
@@ -218,14 +226,22 @@ DEFINE_FUNCTION_ARM(bsp_start_memcpy)
 	mov	r3, #0
 	mov	ip, sp
 	mov	lr, pc
+#ifdef __thumb__
 	bx	ip
+#else
+	mov	pc, ip
+#endif
 
 	/* Restore stack and non-volatile registers */
 	add	sp, sp, #24
 	pop	{r4-r8, lr}
 
 	/* Return */
+#ifdef __thumb__
 	bx	lr
+#else
+	mov	pc, lr
+#endif
 
 bsp_start_memcpy_begin:
 
@@ -235,4 +251,8 @@ bsp_start_memcpy_begin:
 	add	r3, r3, #4
 	cmp	r3, r2
 	bcc	bsp_start_memcpy_begin
+#ifdef __thumb__
 	bx	lr
+#else
+	mov	pc, lr
+#endif

c/src/lib/libbsp/arm/smdk2410/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-04-30	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* Makefile.am, preinstall.am: Added generic interrupt support modules.

c/src/lib/libbsp/arm/smdk2410/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## configure.ac,v 1.5 2003/03/11 09:39:07 ralf Exp
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-arm-smdk2410],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/avr/ChangeLog

@@ -1,3 +1,7 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2009-02-25	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* Makefile.am: Rework.

c/src/lib/libbsp/avr/avrtest/ChangeLog

@@ -1,3 +1,11 @@
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* tools/configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-04-25	Joel Sherrill <joel.sherrilL@OARcorp.com>
 
 	* bsp_specs: Remove warning on __start not found.

c/src/lib/libbsp/avr/avrtest/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-h8300-h8sim],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_CONFIG_BUILD_SUBDIRS(tools)

c/src/lib/libbsp/avr/avrtest/tools/configure.ac

@@ -2,14 +2,14 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-sparc-erc32-tools],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([runtest.in])
 RTEMS_TOP(../../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
 
-AM_INIT_AUTOMAKE([no-define foreign 1.10])
+AM_INIT_AUTOMAKE([no-define foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 RTEMS_ENV_RTEMSBSP

c/src/lib/libbsp/avr/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-avr],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([avrtest])
 RTEMS_TOP(../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define foreign 1.10])
+AM_INIT_AUTOMAKE([no-define foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 RTEMS_ENV_RTEMSBSP

c/src/lib/libbsp/bfin/ChangeLog

@@ -1,3 +1,11 @@
+2011-04-20	Joel Sherrill <joel.sherrilL@OARcorp.com>
+
+	* acinclude.m4: Regenerated for TLL6527M.
+
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-05-31	Joel Sherrill <joel.sherrilL@OARcorp.com>
 
 	* shared/start/start.S: Pass 0/NULL for argc/argv.

c/src/lib/libbsp/bfin/TLL6527M/ChangeLog

@@ -0,0 +1,15 @@
+2011-07-14	Joel Sherrill <joel.sherrilL@OARcorp.com>
+
+	* .cvsignore, include/.cvsignore: New files.
+
+2011-04-20      Rohan Kangralkar <rkangral@ece.neu.edu>
+
+	PR 1781/bsps
+	* ChangeLog, Makefile.am, README, bsp_specs, configure.ac,
+	preinstall.am, times, console/console.c, include/bsp.h,
+	include/cplb.h, include/tm27.h, make/custom/TLL6527M.cfg,
+	startup/bspstart.c, startup/linkcmds: New files.
+	Initial port for the TLL6527Mboard that contains blackfin 52X 
+	range of processors. Used eZKit533 as a reference for building
+	the port.
+

c/src/lib/libbsp/bfin/TLL6527M/Makefile.am

@@ -0,0 +1,52 @@
+##
+## $Id$
+##
+
+ACLOCAL_AMFLAGS = -I ../../../../aclocal
+
+include $(top_srcdir)/../../../../automake/compile.am
+
+include_bspdir = $(includedir)/bsp
+
+dist_project_lib_DATA = bsp_specs
+
+include_HEADERS = include/bsp.h
+include_HEADERS += include/tm27.h
+include_HEADERS += include/cplb.h
+
+nodist_include_HEADERS = include/bspopts.h
+nodist_include_bsp_HEADERS = ../../shared/include/bootcard.h
+DISTCLEANFILES = include/bspopts.h
+
+noinst_PROGRAMS =
+
+include_HEADERS += ../../shared/include/coverhd.h
+
+noinst_LIBRARIES = libbspstart.a
+libbspstart_a_SOURCES = ../shared/start/start.S
+project_lib_DATA = start.$(OBJEXT)
+
+dist_project_lib_DATA += startup/linkcmds
+
+noinst_LIBRARIES += libbsp.a
+
+libbsp_a_SOURCES = ../../shared/bsplibc.c ../../shared/bsppost.c \
+  ../../shared/bsppredriverhook.c startup/bspstart.c \
+  ../../shared/bspclean.c ../../shared/sbrk.c ../../shared/setvec.c \
+  ../../shared/bootcard.c ../../shared/gnatinstallhandler.c \
+  ../../shared/bspgetworkarea.c
+
+libbsp_a_SOURCES += console/console.c
+
+libbsp_a_LIBADD  = ../../../libcpu/@RTEMS_CPU@/mmu.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/@RTEMS_CPU_MODEL@/interrupt.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/cache.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/uart.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/clock.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/rtc.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/timer.rel
+
+EXTRA_DIST = times
+
+include $(srcdir)/preinstall.am
+include $(top_srcdir)/../../../../automake/local.am

c/src/lib/libbsp/bfin/TLL6527M/README

@@ -0,0 +1,96 @@
+#
+#  $Id$
+#
+
+BSP NAME:           TLL6527M
+BOARD:              TLL6527M 
+CPU FAMILY:         Blackfin
+CPU:                Blackfin 527 
+MODE:               32 bit mode
+
+DEBUG MONITOR:      
+SIMULATOR:          
+
+PERIPHERALS
+===========
+TIMERS:             internal
+  RESOLUTION:         1 milisecond
+SERIAL PORTS:       2 internal UART (polled/interrupt/dma)
+REAL-TIME CLOCK:    internal
+DMA:                internal
+VIDEO:              none
+SCSI:               none
+NETWORKING:         none
+
+
+DRIVER INFORMATION
+==================
+CLOCK DRIVER:       internal
+TIMER DRIVER:       internal
+I2C:
+SPI:
+PPI:
+SPORT:
+
+
+STDIO
+=====
+PORT:               Console port 1
+ELECTRICAL:         RS-232
+BAUD:               9600
+BITS PER CHARACTER: 8
+PARITY:             None
+STOP BITS:          1
+
+NOTES
+=====
+The TLL56527M board contains analog devices blackfin 527 processor. In addition
+to the peripherals provided by bf527 the board has a temprature sensor, 
+accelerometer and power module connected via I2C. It also has LCD interface,
+Card reader interface.
+
+The analog device bf52X family of processors are different from the bf53x range 
+of processors. This port supports the additional features that are not 
+supported by the blackfin 53X family of processors.
+  
+The TLL6527M does not use the interrupt module used by the bfin 53x since it has
+an additional system interrupt controller isr registers for additional lines.
+On the 53X these line are multiplexed. 
+The centralized interrupt handler is implemented to use lookup tables for 
+jumping to the user ISR. For more details look at files implemented under 
+libcpu/bfin/bf52x/interrupt/*
+
+This port supports only the uart peripheral. The uart is supported via 
+polling, DMA, interrupt. The uart file is generic and is common between the 
+ports. Under bsp configure.ac files 
+* change the CONSOLE_BAUDRATE or to choose among different baudrate.
+* Set UART_USE_DMA for UART to use DMA based transfers. In DMA based transfer
+  chunk of buffer is transmitted at once and then an interrupt is generated.
+* Set CONSOLE_USE_INTERRUPTS to use interrupt based transfers. After every 
+  character is transmitted an interrupt is generated. 
+* If CONSOLE_USE_INTERRUPTS, UART_USE_DMA are both not set then the port uses
+  polling to transmit data over uart. This call is blocking. 
+
+TLL6527 specific file are mentioned below.
+=====================================
+c/src/lib/libcpu/bfin/bf52x/*
+c/src/lib/libbsp/bfin/TLL6527M/*
+
+
+The port was compiled using
+===========================
+1. bfin-rtems4.11-gcc (GCC) 4.5.2 20101216 
+              (RTEMS gcc-4.5.2-3.el5/newlib-1.19.0-1.el5)
+2. automake (GNU automake) 1.11.1
+3. autoconf (GNU Autoconf) 2.68
+
+
+The port was configured using the flags
+========================================== 
+--target=bfin-rtems4.11 --enable-rtemsbsp=TLL6527M --enable-tests=samples 
+--disable-posix --disable-itron 
+       
+
+ISSUES:
+Could not place code in l1code (SRAM) because it was not being loaded by the 
+gnu loaded.

c/src/lib/libbsp/bfin/TLL6527M/bsp_specs

@@ -4,8 +4,7 @@
 
 *startfile:
 %{!qrtems: %(old_startfile)} \
-%{!nostdlib: %{qrtems: start.o%s -e start}}
+%{!nostdlib: %{qrtems: start.o%s -e __start}}
 
 *link:
 %{!qrtems: %(old_link)} %{qrtems: -dc -dp -N}
-

c/src/lib/libbsp/bfin/TLL6527M/configure.ac

@@ -0,0 +1,47 @@
+## Process this file with autoconf to produce a configure script.
+## 
+## $Id$
+
+AC_PREREQ(2.68)
+AC_INIT([rtems-c-src-lib-libbsp-bfin-TLL6527M],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
+AC_CONFIG_SRCDIR([bsp_specs])
+RTEMS_TOP(../../../../../..)
+
+RTEMS_CANONICAL_TARGET_CPU
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
+RTEMS_BSP_CONFIGURE
+
+RTEMS_PROG_CC_FOR_TARGET
+RTEMS_CANONICALIZE_TOOLS
+RTEMS_PROG_CCAS
+
+## bsp-specific options
+RTEMS_BSPOPTS_SET([CONSOLE_USE_INTERRUPTS],[*],[1])
+RTEMS_BSPOPTS_HELP([CONSOLE_USE_INTERRUPTS],
+[The console driver can operate in either polled or interrupt mode.])
+
+RTEMS_BSPOPTS_SET([UART_USE_DMA],[*],[1])
+RTEMS_BSPOPTS_HELP([UART_USE_DMA],
+[The uart driver can operate in dma mode with interrupts. 
+Set to 1 if DMA operation is required ])
+
+RTEMS_BSPOPTS_SET([CONSOLE_BAUDRATE],[*],[9600])
+RTEMS_BSPOPTS_HELP([CONSOLE_BAUDRATE],
+[The baudrate of the console uart.])
+
+RTEMS_BSPOPTS_SET([INTERRUPT_USE_TABLE],[*],[1])
+RTEMS_BSPOPTS_HELP([INTERRUPT_USE_TABLE],
+[Select if INTERRUPT use table or link list])
+
+
+
+RTEMS_BSPOPTS_SET([BFIN_ON_SKYEYE],[*],[0])
+RTEMS_BSPOPTS_HELP([BFIN_ON_SKYEYE],
+[(BSP--Skyeye)
+ If defined, disable features which are not supported on Skyeye.])
+
+RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
+
+# Explicitly list all Makefiles here
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT

c/src/lib/libbsp/bfin/TLL6527M/console/console.c

@@ -0,0 +1,182 @@
+/**
+ *@file console.c
+ *
+ *@brief
+ *  - This file implements uart console for TLL6527M. TLL6527M has BF527 with
+ *  second uart (uart-1) connected to the console.
+ *
+ * Target:   TLL6527v1-0
+ * Compiler:
+ *
+ * COPYRIGHT (c) 2010 by ECE Northeastern University.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license
+ *
+ * @author Rohan Kangralkar, ECE, Northeastern University
+ *         (kangralkar.r@husky.neu.edu)
+ *
+ * LastChange:
+ * $Id$
+ *
+ */
+
+#include <rtems.h>
+#include <rtems/libio.h>
+#include <bsp.h>
+#include <rtems/bspIo.h>
+
+#include <bsp/interrupt.h>
+#include <libcpu/uart.h>
+
+/***************************************************
+LOCAL DEFINES
+ ***************************************************/
+
+
+/***************************************************
+STATIC GLOBALS
+ ***************************************************/
+/**
+ * Declaration of UART
+ */
+static bfin_uart_channel_t channels[] = {
+  {"/dev/console",
+    UART1_BASE_ADDRESS,
+    DMA10_BASE_ADDRESS,
+    DMA11_BASE_ADDRESS,
+    CONSOLE_USE_INTERRUPTS,
+    UART_USE_DMA,
+    CONSOLE_BAUDRATE,
+    NULL,
+    0,
+    0}
+};
+
+/**
+ * Over all configuration
+ */
+static bfin_uart_config_t config = {
+    SCLK,
+    sizeof(channels) / sizeof(channels[0]),
+    channels
+};
+
+
+#if CONSOLE_USE_INTERRUPTS
+/**
+ * The Rx and Tx isr will get the same argument
+ * The isr will have to find if it was the rx that caused the interrupt or
+ * the tx
+ */
+static bfin_isr_t bfinUARTISRs[] = {
+#if UART_USE_DMA
+    /* For First uart */
+    {IRQ_DMA10_UART1_RX, bfinUart_rxDmaIsr, (void *)&channels[0], 0},
+    {IRQ_DMA11_UART1_TX, bfinUart_txDmaIsr, (void *)&channels[0], 0},
+    /* For second uart */
+#else
+    /* For First uart */
+    {IRQ_DMA10_UART1_RX, bfinUart_rxIsr, &channels[0], 0},
+    {IRQ_DMA11_UART1_TX, bfinUart_txIsr, &channels[0], 0},
+    /* For second uart */
+#endif
+};
+#endif
+
+
+static void TLL6527_BSP_output_char(char c) {
+
+  bfin_uart_poll_write(0, c);
+}
+
+static int TLL6527_BSP_poll_char(void) {
+
+  return bfin_uart_poll_read(0);
+}
+
+BSP_output_char_function_type     BSP_output_char = TLL6527_BSP_output_char;
+BSP_polling_getchar_function_type BSP_poll_char   = TLL6527_BSP_poll_char;
+
+
+
+rtems_device_driver console_close(rtems_device_major_number major,
+    rtems_device_minor_number minor,
+    void *arg) {
+
+  return rtems_termios_close(arg);
+}
+
+rtems_device_driver console_read(rtems_device_major_number major,
+    rtems_device_minor_number minor,
+    void *arg) {
+
+  return rtems_termios_read(arg);
+}
+
+rtems_device_driver console_write(rtems_device_major_number major,
+    rtems_device_minor_number minor,
+    void *arg) {
+
+  return rtems_termios_write(arg);
+}
+
+rtems_device_driver console_control(rtems_device_major_number major,
+    rtems_device_minor_number minor,
+    void *arg) {
+
+  return rtems_termios_ioctl(arg);
+}
+
+
+
+/*
+ *  Open entry point
+ */
+rtems_device_driver console_open(rtems_device_major_number major,
+    rtems_device_minor_number minor,
+    void *arg) {
+
+  return bfin_uart_open(major, minor, arg);
+}
+
+
+
+/**
+ *
+ * This routine initializes the console IO driver.
+ *
+ * Parameters
+ * @param major major number
+ * @param minor minor number
+ *
+ * Output parameters:  NONE
+ *
+ * @return void
+ */
+rtems_device_driver console_initialize(rtems_device_major_number major,
+    rtems_device_minor_number minor,
+    void *arg) {
+  rtems_status_code status = RTEMS_NOT_DEFINED;
+#if CONSOLE_USE_INTERRUPTS
+  int               i      = 0;
+#endif
+
+  status = bfin_uart_initialize(major, &config);
+  if (status != RTEMS_SUCCESSFUL) {
+    rtems_fatal_error_occurred(status);
+  }
+
+#if CONSOLE_USE_INTERRUPTS
+  for (i = 0; i < sizeof(bfinUARTISRs) / sizeof(bfinUARTISRs[0]); i++) {
+    bfin_interrupt_register(&bfinUARTISRs[i]);
+#if INTERRUPT_USE_TABLE
+#else
+    bfin_interrupt_enable(&bfinUARTISRs[i], 1);
+#endif
+  }
+#endif
+
+  return RTEMS_SUCCESSFUL;
+}

c/src/lib/libbsp/bfin/TLL6527M/include/.cvsignore

@@ -1,4 +1,5 @@
-stamp-h
-stamp-h.in
 bspopts.h
 bspopts.h.in
+coverhd.h
+stamp-h
+stamp-h.in

c/src/lib/libbsp/bfin/TLL6527M/include/bsp.h

@@ -0,0 +1,79 @@
+/**
+ *@file bsp.h
+ *  
+ *  This include file contains all board IO definitions for TLL6527M.
+ *
+ * COPYRIGHT (c) 2010 by ECE Northeastern University.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license
+ *
+ *  $Id$
+ */
+ 
+
+#ifndef _BSP_H
+#define _BSP_H
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <bspopts.h>
+
+#include <rtems.h>
+#include <rtems/console.h>
+#include <rtems/clockdrv.h>
+#include <rtems/score/bfin.h>
+#include <rtems/bfin/bf52x.h>
+#include <bf52x.h>
+
+
+/* 
+ * PLL and clock setup values:
+ */
+
+/*
+ *  PLL configuration for TLL6527M
+ *
+ *  XTL   =  27 MHz
+ *  CLKIN =  13 MHz
+ *  VCO   = 391 MHz
+ *  CCLK  = 391 MHz
+ *  SCLK  = 130 MHz
+ */
+
+#define PLL_CSEL    0x0000      /* CCLK = VCO      */
+#define PLL_SSEL    0x0003      /* SCLK = CCLK/3   */
+#define PLL_MSEL    0x3A00      /* VCO = 29xCLKIN  */
+#define PLL_DF      0x0001      /* CLKIN = XTL/2   */
+
+#define CLKIN		    (25000000)  /* Input clock to the PLL */
+#define CCLK        (600000000)   /* CORE CLOCK     */
+#define SCLK        (100000000)   /* SYSTEM CLOCK   */
+
+/*
+ * UART setup values
+ */
+#define BAUDRATE    57600       /* Console Baudrate   */
+#define WORD_5BITS  0x00        /* 5 bits word        */
+#define WORD_6BITS  0x01        /* 6 bits word        */
+#define WORD_7BITS  0x02        /* 7 bits word        */
+#define WORD_8BITS  0x03        /* 8 bits word        */
+#define EVEN_PARITY 0x18        /* Enable EVEN parity */
+#define ODD_PARITY  0x08        /* Enable ODD parity  */
+#define TWO_STP_BIT 0x04        /* 2 stop bits        */
+
+rtems_isr_entry set_vector(                     /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

c/src/lib/libbsp/bfin/TLL6527M/include/cplb.h

@@ -0,0 +1,34 @@
+/*  cplb.h
+ *  
+ *  Copyright (c) 2006 by Atos Automacao Industrial Ltda.
+ *             written by Alain Schaefer <alain.schaefer@easc.ch>
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+#ifndef _CPLB_H
+#define _CPLB_H
+
+/* CPLB configurations */
+#define CPLB_DEF_CACHE_WT	CPLB_L1_CHBL | CPLB_WT
+#define CPLB_DEF_CACHE_WB	CPLB_L1_CHBL 
+#define CPLB_CACHE_ENABLED	CPLB_L1_CHBL | CPLB_DIRTY
+
+#define CPLB_DEF_CACHE		CPLB_L1_CHBL | CPLB_WT
+#define CPLB_ALL_ACCESS	CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR
+
+#define CPLB_I_PAGE_MGMT	CPLB_LOCK | CPLB_VALID
+#define CPLB_D_PAGE_MGMT	CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID
+
+#define CPLB_DNOCACHE		CPLB_ALL_ACCESS | CPLB_VALID
+#define CPLB_DDOCACHE		CPLB_DNOCACHE | CPLB_DEF_CACHE
+#define CPLB_INOCACHE   	CPLB_USER_RD | CPLB_VALID
+#define CPLB_IDOCACHE   	CPLB_INOCACHE | CPLB_L1_CHBL
+
+#define CPLB_DDOCACHE_WT	CPLB_DNOCACHE | CPLB_DEF_CACHE_WT
+#define CPLB_DDOCACHE_WB	CPLB_DNOCACHE | CPLB_DEF_CACHE_WB
+
+#endif /* _CPLB_H */

c/src/lib/libbsp/bfin/TLL6527M/include/tm27.h

@@ -0,0 +1,37 @@
+/*
+ *  tm27.h
+ *
+ * COPYRIGHT (c) 2010 by ECE Northeastern University.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license
+ *
+ *  $Id$
+ */
+
+#ifndef _RTEMS_TMTEST27
+#error "This is an RTEMS internal file you must not include directly."
+#endif
+
+#ifndef __tm27_h
+#define __tm27_h
+
+/*
+ *  Define the interrupt mechanism for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 0
+
+#define Install_tm27_vector(handler) \
+{ \
+  set_vector( handler, 0x06, 1 ); \
+}
+
+#define Cause_tm27_intr() asm volatile("raise 0x06;" : :);
+
+#define Clear_tm27_intr() /* empty */
+
+#define Lower_tm27_intr() /* empty */
+
+#endif

c/src/lib/libbsp/bfin/TLL6527M/make/custom/TLL6527M.cfg

@@ -0,0 +1,19 @@
+#
+#  Config file for Blackfin TLL6527M
+#
+#  $Id$
+#
+
+include $(RTEMS_ROOT)/make/custom/default.cfg
+
+RTEMS_CPU=bfin
+RTEMS_CPU_MODEL=bf52x
+
+#  This contains the compiler options necessary to select the CPU model
+#  and (hopefully) optimize for it. 
+#
+CPU_CFLAGS =-mcpu=bf527
+
+# optimize flag: typically -O2
+# gcc-4.2.0 segfaults on -OX > -O0
+CFLAGS_OPTIMIZE_V = -O2 -g

c/src/lib/libbsp/bfin/TLL6527M/preinstall.am

@@ -28,23 +28,27 @@ $(PROJECT_INCLUDE)/$(dirstamp):
 	@: > $(PROJECT_INCLUDE)/$(dirstamp)
 PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
 
-$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
-PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
-
 $(PROJECT_INCLUDE)/bsp/$(dirstamp):
 	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
 	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
 PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
 
+$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
+PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
+
 $(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
 
-$(PROJECT_INCLUDE)/tm27.h: ../../shared/include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
+$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
 
+$(PROJECT_INCLUDE)/cplb.h: include/cplb.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/cplb.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/cplb.h
+
 $(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
 PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
@@ -61,10 +65,6 @@ $(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
 TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
 
-$(PROJECT_LIB)/crtnn.$(OBJEXT): crtnn.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/crtnn.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/crtnn.$(OBJEXT)
-
 $(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
 	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
 PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds

c/src/lib/libbsp/bfin/TLL6527M/startup/bspstart.c

@@ -0,0 +1,207 @@
+/*  bspstart.c for TLL6527M
+ *
+ *  This routine starts the application.  It includes application,
+ *  board, and monitor specific initialization and configuration.
+ *  The generic CPU dependent initialization has been performed
+ *  before this routine is invoked.
+ *  
+ * COPYRIGHT (c) 2010 by ECE Northeastern University.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license
+ *
+ *  $Id$
+ */
+
+
+#include <bsp.h>
+#include <cplb.h>
+#include <bsp/interrupt.h>
+#include <libcpu/ebiuRegs.h>
+
+const unsigned int dcplbs_table[16][2] = {  
+  { 0xFFA00000, (PAGE_SIZE_1MB | CPLB_D_PAGE_MGMT | CPLB_WT) },
+  { 0xFF900000, (PAGE_SIZE_1MB | CPLB_D_PAGE_MGMT | CPLB_WT) },/* L1 Data B */
+  { 0xFF800000, (PAGE_SIZE_1MB | CPLB_D_PAGE_MGMT | CPLB_WT) },/* L1 Data A */
+  { 0xFFB00000, (PAGE_SIZE_1MB | CPLB_DNOCACHE) },
+
+  { 0x20300000, (PAGE_SIZE_1MB | CPLB_DNOCACHE) },/* Async Memory Bank 3 */
+  { 0x20200000, (PAGE_SIZE_1MB | CPLB_DNOCACHE) },/* Async Memory Bank 2  */
+  { 0x20100000, (PAGE_SIZE_1MB | CPLB_DNOCACHE) },/* Async Memory Bank 1 */
+  { 0x20000000, (PAGE_SIZE_1MB | CPLB_DNOCACHE) }, /* Async Memory Bank 0 */
+
+  { 0x02400000, (PAGE_SIZE_4MB | CPLB_DNOCACHE) },
+  { 0x02000000, (PAGE_SIZE_4MB | CPLB_DNOCACHE) },
+  { 0x00C00000, (PAGE_SIZE_4MB | CPLB_DNOCACHE) },
+  { 0x00800000, (PAGE_SIZE_4MB | CPLB_DNOCACHE) },
+  { 0x00400000, (PAGE_SIZE_4MB | CPLB_DNOCACHE) },
+  { 0x00000000, (PAGE_SIZE_4MB | CPLB_DNOCACHE) },
+
+  { 0xffffffff, 0xffffffff }/* end of section - termination */
+};
+
+
+const unsigned int _icplbs_table[16][2] = { 
+  { 0xFFA00000, (PAGE_SIZE_1MB | CPLB_I_PAGE_MGMT | CPLB_I_PAGE_MGMT | 0x4) },
+  /* L1 Code */
+  { 0xEF000000, (PAGE_SIZE_1MB | CPLB_INOCACHE) }, /* AREA DE BOOT */
+  { 0xFFB00000, (PAGE_SIZE_1MB | CPLB_INOCACHE) },
+
+  { 0x20300000, (PAGE_SIZE_1MB | CPLB_INOCACHE) },/* Async Memory Bank 3 */
+  { 0x20200000, (PAGE_SIZE_1MB | CPLB_INOCACHE) },/* Async Bank 2 (Secnd) */
+  { 0x20100000, (PAGE_SIZE_1MB | CPLB_INOCACHE) },/* Async Bank 1 (Prim B) */
+  { 0x20000000, (PAGE_SIZE_1MB | CPLB_INOCACHE) },/* Async Bank 0 (Prim A) */
+
+  { 0x02400000, (PAGE_SIZE_4MB | CPLB_INOCACHE) },
+  { 0x02000000, (PAGE_SIZE_4MB | CPLB_INOCACHE) },
+  { 0x00C00000, (PAGE_SIZE_4MB | CPLB_INOCACHE) },
+  { 0x00800000, (PAGE_SIZE_4MB | CPLB_INOCACHE) },
+  { 0x00400000, (PAGE_SIZE_4MB | CPLB_INOCACHE) },
+  { 0x00000000, (PAGE_SIZE_4MB | CPLB_INOCACHE) },
+
+  { 0xffffffff, 0xffffffff }/* end of section - termination */
+};
+
+/*
+ *  Use the shared implementations of the following routines
+ */
+
+void bsp_libc_init( void *, uint32_t, int );
+void Init_PLL (void);
+void Init_EBIU (void);
+void Init_Flags(void);
+void Init_RTC (void);
+void initCPLB(void);
+
+
+void null_isr(void);
+
+/*
+ *  Function:   bsp_pretasking_hook
+ *  Created:    95/03/10
+ *
+ *  Description:
+ *      BSP pretasking hook.  Called just before drivers are initialized.
+ *      Used to setup libc and install any BSP extensions.
+ *
+ *  NOTES:
+ *      Must not use libc (to do io) from here, since drivers are
+ *      not yet initialized.
+ *
+ */
+
+void bsp_pretasking_hook(void)
+{
+  bfin_interrupt_init();
+}
+
+/*
+ *  bsp_start
+ *
+ *  This routine does the bulk of the system initialization.
+ */
+
+void bsp_start( void )
+{
+  /* BSP Hardware Initialization*/
+  Init_RTC();   /* Blackfin Real Time Clock initialization */  
+  Init_PLL();   /* PLL initialization */
+  Init_EBIU();  /* EBIU initialization */
+  Init_Flags(); /* GPIO initialization */
+
+  /*
+   *  Allocate the memory for the RTEMS Work Space.  This can come from
+   *  a variety of places: hard coded address, malloc'ed from outside
+   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
+   *  typically done by stock BSPs) by subtracting the required amount
+   *  of work space from the last physical address on the CPU board.
+   */
+  int i=0;
+  for (i=5;i<16;i++) {
+    set_vector((rtems_isr_entry)null_isr, i, 1);
+  }
+  
+}
+
+ /*
+  * Init_PLL
+  * 
+  * Routine to initialize the PLL. The TLL6527M uses a 25 Mhz XTAL.
+  */
+void Init_PLL (void)
+{
+  unsigned short msel = 0;
+  unsigned short ssel = 0;
+
+  msel = (unsigned short)( (float)CCLK/(float)CLKIN );
+  ssel = (unsigned short)( (float)(CLKIN*msel)/(float)SCLK);
+  
+  asm("cli r0;");
+
+  *((uint32_t*)SIC_IWR) = 0x1;
+
+  /* Configure PLL registers */
+  *((uint16_t*)PLL_DIV) = ssel;;
+  msel = msel<<9;
+  *((uint16_t*)PLL_CTL) = msel;
+
+  /* Commands to set PLL values */
+  asm("idle;");
+  asm("sti r0;");
+}
+
+ /*
+  * Init_EBIU
+  * 
+  * Configure extern memory
+  */
+
+void Init_EBIU (void)
+{
+  /* Check if SDRAM is already enabled */
+  if ( 0 != (*(uint16_t *)EBIU_SDSTAT & EBIU_SDSTAT_SDRS) ){
+    asm("ssync;");
+    /* RDIV = (100MHz*64ms)/8192-(6+3)=0x406 cycles */
+    *(uint16_t *)EBIU_SDRRC  = 0x3F6; /* SHould have been 0x306*/
+    *(uint16_t *)EBIU_SDBCTL = EBIU_SDBCTL_EBCAW_10 | EBIU_SDBCTL_EBSZ_64M |
+        EBIU_SDBCTL_EBE;
+    *(uint32_t *)EBIU_SDGCTL = 0x8491998d;
+    asm("ssync;");
+  } else {
+    /* SDRAm is already programmed */
+  }
+}
+
+ /*
+  * Init_Flags
+  * 
+  * Enable LEDs port
+  */
+void Init_Flags(void)
+{
+  *((uint16_t*)PORTH_FER)    = 0x0;
+  *((uint16_t*)PORTH_MUX)    = 0x0;
+  *((uint16_t*)PORTHIO_DIR)  = 0x1<<15;
+  *((uint16_t*)PORTHIO_SET)  = 0x1<<15;
+}
+
+
+
+void initCPLB(void) {
+
+       int i = 0;
+       unsigned int *addr;
+       unsigned int *data;
+        
+       addr = (unsigned int *)0xffe00100;
+       data = (unsigned int *)0xffe00200;
+
+       while ( dcplbs_table[i][0] != 0xffffffff ) {
+               *addr = dcplbs_table[i][0];
+               *data = dcplbs_table[i][1];
+
+               addr++;
+               data++;
+       } 
+}

c/src/lib/libbsp/bfin/TLL6527M/startup/linkcmds

@@ -0,0 +1,154 @@
+OUTPUT_FORMAT("elf32-bfin", "elf32-bfin",
+            "elf32-bfin")
+
+OUTPUT_ARCH(bfin)
+ENTRY(__start)
+
+/*
+ * Declare some sizes.
+ */
+_RamBase    = DEFINED(_RamBase)   ? _RamBase : 0x0;
+_RamSize    = DEFINED(_RamSize)   ? _RamSize : 0x04000000;
+_HeapSize   = DEFINED(_HeapSize)  ? _HeapSize : 0x10000;
+_StackSize  = DEFINED(_StackSize) ? _StackSize : 0x10000;
+
+MEMORY
+{
+      sdram(rwx)      : ORIGIN = 0x00000100, LENGTH = 0x04000000
+      
+      l1dataA(rwx)    : ORIGIN = 0xff800000, LENGTH = 0x00004000
+      l1dataAC(rwx)   : ORIGIN = 0xff804000, LENGTH = 0x00004000
+      l1dataB(rwx)    : ORIGIN = 0xff900000, LENGTH = 0x00004000
+      l1dataBC(rwx)   : ORIGIN = 0xff904000, LENGTH = 0x00004000
+      
+      l1code(rwx)     : ORIGIN = 0xffa00000, LENGTH = 0x0000C000
+      l1codeC(rwx)    : ORIGIN = 0xffa10000, LENGTH = 0x00004000
+      scratchpad(rwx) : ORIGIN = 0xffb00000, LENGTH = 0x00001000
+}
+
+SECTIONS
+{
+
+    .init          : 
+    { 
+    	*(.l1code)
+        KEEP (*(.init))
+    } > sdram   /*=0*/
+
+    .text :
+    {
+         CREATE_OBJECT_SYMBOLS
+        *(.text)
+        *(.rodata*)
+        *(.gnu.linkonce.r*)
+        
+        /*
+         * Special FreeBSD sysctl sections.
+         */
+        . = ALIGN (16);
+        ___start_set_sysctl_set = .;
+        *(set_sysctl_*);
+        ___stop_set_sysctl_set = ABSOLUTE(.);
+        *(set_domain_*);
+        *(set_pseudo_*);
+
+         _etext = .;
+
+        ___CTOR_LIST__ = .;
+        LONG((___CTOR_END__ - ___CTOR_LIST__) / 4 - 2)
+        *(.ctors)
+        LONG(0)
+        ___CTOR_END__ = .;
+        ___DTOR_LIST__ = .;
+        LONG((___DTOR_END__ - ___DTOR_LIST__) / 4 - 2)
+        *(.dtors)
+        LONG(0)
+        ___DTOR_END__ = .;         
+    } > sdram
+    
+    .fini :
+    {
+        KEEP (*(.fini))
+    } > sdram  /*=0*/ 
+    
+    .data :
+    {
+        *(.data)
+        *(.jcr)
+        *(.gnu.linkonce.d*)
+        CONSTRUCTORS
+         _edata = .;
+    } > sdram
+
+    .eh_frame : { *(.eh_frame) } > sdram
+    .data1   : { *(.data1) } > sdram
+    .eh_frame : { *(.eh_frame) } > sdram
+    .gcc_except_table : { *(.gcc_except_table*) } > sdram
+
+    .rodata :
+    {
+        *(.rodata)
+        *(.rodata.*)
+        *(.gnu.linkonce.r*)
+    } > sdram
+
+    
+    .bss :
+    {
+         _bss_start = .;
+        _clear_start = .;
+        *(.bss)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        . = ALIGN (64);
+        _stack_init = .;
+        . += _StackSize;
+        _clear_end = .;
+        _WorkAreaBase = .;
+         _end = .;
+         __end = .;
+    } > sdram
+    
+/* Debugging stuff follows */
+
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) } 
+  .stabstr 0 : { *(.stabstr) } 
+  .stab.excl 0 : { *(.stab.excl) } 
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) } 
+  .stab.indexstr 0 : { *(.stab.indexstr) } 
+  .comment 0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) } 
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) } 
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) } 
+  /*.stack 0x80000 : { _stack = .; *(.stack) }*/
+  /* These must appear regardless of  .  */   
+}
+
+__HeapSize = _HeapSize;
+__edata = _edata;
+__etext = _etext;
+

c/src/lib/libbsp/bfin/TLL6527M/times

@@ -0,0 +1,179 @@
+#
+#  Timing Test Suite Results for TLL6527M
+#
+#
+#  $Id$
+#
+
+Board: TLL6527M 
+CPU: Blackfin 527
+Clock Speed: 600 MHz
+Memory Configuration: SDRAM 100 MHz
+
+
+*** TIME TEST 1 ***
+rtems_semaphore_create 8
+rtems_semaphore_delete 4
+rtems_semaphore_obtain: available 0
+rtems_semaphore_obtain: not available -- NO_WAIT 0
+rtems_semaphore_release: no waiting tasks 1
+*** END OF TEST 1 ***
+
+
+*** TIME TEST 2 ***
+rtems_semaphore_obtain: not available -- caller blocks 8
+*** END OF TEST 2 ***
+
+
+*** TIME TEST 3 ***
+
+*** TIME TEST 4 ***
+
+*** TIME TEST 5 ***
+
+*** TIME TEST 6 ***
+rtems_task_restart: calling task 3
+rtems_task_suspend: returns to caller 1
+rtems_task_resume: task readied -- returns to caller 1
+rtems_task_delete: ready task 15
+*** END OF TEST 6 ***
+
+*** TIME TEST 7 ***
+
+
+*** TIME TEST 8 ***
+rtems_task_set_priority: obtain current priorityrtems_task_mode: reschedule -- preempts caller 0   
+rtems_task_set_priority: returns to caller  2
+rtems_task_mode: obtain current mode101 0
+rtems_task_mode: no reschedule 0
+rtems_task_mode: reschedule -- returns to caller
+ 2
+rtems_task_set_note 1
+rtems_task_get_note 0
+rtems_clock_set 2
+rtems_clock_get_tod 12
+*** END OF TEST 8 ***
+
+
+*** TIME TEST 9 ***
+rtems_message_queue_create 43
+rtems_message_queue_send: no waiting tasks 2
+rtems_message_queue_urgent: no waiting tasks 2
+rtems_message_queue_receive: available 2
+rtems_message_queue_flush: no messages flushed 0
+rtems_message_queue_flush: messages flushed 1
+rtems_message_queue_delete 8
+*** END OF TEST 9 ***
+
+*** TIME TEST 10 ***
+rtems_message_queue_receive: not available -- NO_WAITrtems_message_queue_receive: not available -- caller blocks 1
+ 8
+*** END OF TEST 10 ***
+
+*** TIME TEST 11 ***
+
+*** TIME TEST 12 ***
+
+*** TIME TEST 13 ***
+
+*** TIME TEST 14 ***
+
+*** TIME TEST 15 ***
+rtems_event_receive: obtain current eventsrtems_event_receive: not available -- caller blocks  07  
+
+rtems_event_receive: not available -- NO_WAITrtems_event_send: n
+
+
+
+*** TIME TEST 16 ***
+
+*** TIME TEST 17 ***
+     
+     
+*** TIME TEST 18 ***
+rtems_task_delete: calling task 22
+*** END OF TEST 18 ***
+
+
+*** TIME TEST 19 ***
+rtems_signal_catch 1
+rtems_signal_send: returns to caller 2
+rtems_signal_send: signal to self 8
+exi
+
+
+
+*** TIME TEST 20 ***                                                                               
+rtems_partition_create 12                                                                          
+rtems_region_creatertems_region_get_segment: not available -- caller blocks 15 
+rtems_partition_get_buffer: available 3
+rtems_partition_get_buffer: not available15 1
+rtems_partition_return_buffer 2
+
+rtems_partition_delete 2
+rtems_region_get_segment: available 5rtems_region_return_segment: task readied -- returns to caller
+ rtems_region_get_segment: not available -- NO_WAIT 5
+rtems_region_return_segment: no waiting tasks3 4
+
+Ack! Something bad happened to the Blackfin!
+
+SEQUENCER STATUS:
+ SEQSTAT: 0000c021  IPEND: 8068  SYSCFG: 0006
+  HWERRCAUSE: 0x3: external memory addressing error
+  EXCAUSE   : 0x21: undef inst
+  physical IVG6 asserted : <0x00009542> /* unknown address */
+  physical IVG15 asserted : <0x00009690> /* unknown address */
+ RETE: <0x00000100> /* unknown address */
+ RETN: <0x92a330ab> { ___smulsi3_highpart + 0x8ead486f }
+ RETX: <0x12001940> { ___smulsi3_highpart + 0xe0a3104 }
+ RETS: <0x000095fa> /* unknown address */
+ RETI: <0x0d48338c> { ___smulsi3_highpart + 0x9524b50 }
+DCPLB_FAULT_ADDR: <0x000318f0> /* unknown address */
+ICPLB_FAULT_ADDR: <0x12001940> { ___smulsi3_highpart + 0xe0a3104 }
+ 
+ 
+
+*** TIME TEST 21 ***                                                                               
+
+rtems_region_create FAILED -- expected (successful completion) got (address specified is invalid)
+
+*** TIME TEST 22 ***
+
+*** TIME TEST 23 ***
+
+
+*** TIME TEST 24 ***
+    
+    
+*** TIME TEST 25 ***
+rtems_clock_tick 5
+*** END OF TEST 25 ***
+
+
+*** TIME TEST 26 ***
+
+*** TIME TEST 27 ***
+interrupt entry overhead: returns to interrupted taskinterrupt entry overhead: returns to preempting task  22
+
+interrupt exit overhead: returns to interrupted task
+
+
+*** TIME TEST 28 ***
+rtems_port_create 1
+rtems_port_external_to_internal 0
+rtems_port_internal_to_external 0
+rtems_port_delete 1
+*** END OF TEST 28 ***
+
+
+*** TIME TEST 29 ***
+rtems_rate_monotonic_create 6
+rtems_rate_monotonic_period: initiate period -- returns to caller 10
+rtems_rate_monotonic_period: obtain status 2
+rtems_rate_monotonic_cancel 3
+rtems_rate_monotonic_delete: inactive 6
+rtems_rate_monotonic_delete: active 3
+rtems_rate_monotonic_period: conclude periods -- caller blocks 9
+*** END OF TEST 29 ***
+
+         

c/src/lib/libbsp/bfin/acinclude.m4

@@ -6,6 +6,8 @@ AC_DEFUN([RTEMS_CHECK_BSPDIR],
     AC_CONFIG_SUBDIRS([bf537Stamp]);;
   eZKit533 )
     AC_CONFIG_SUBDIRS([eZKit533]);;
+  TLL6527M )
+    AC_CONFIG_SUBDIRS([TLL6527M]);;
   *)
     AC_MSG_ERROR([Invalid BSP]);;
   esac

c/src/lib/libbsp/bfin/bf537Stamp/ChangeLog

@@ -1,3 +1,18 @@
+2011-04-22	Joel Sherrill <joel.sherrilL@OARcorp.com>
+
+	* console/console.c: Now compiles.
+
+2011-04-20  Rohan Kangralkar <rkangral@ece.neu.edu>
+
+	PR 1781/bsps
+	* console/console-io.c: The UART RX and TX are different ISR
+	now. So the array containing the registeration changes. The
+	change is due to change in the libcup uart function.
+
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2010-03-10	Marc Pignat <marc.pignat@hevs.ch>
 
 	PR 1488/bsps

c/src/lib/libbsp/bfin/bf537Stamp/configure.ac

@@ -3,13 +3,13 @@
 ## $Id$
 ##
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-bfin-bf537Stamp],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/bfin/bf537Stamp/console/console.c

@@ -26,16 +26,20 @@
 */
 
 static bfin_uart_channel_t channels[] = {
-  {"/dev/console",
-   (char *) UART0_BASE_ADDRESS,
-   CONSOLE_USE_INTERRUPTS,
-#ifdef CONSOLE_FORCE_BAUD
-   CONSOLE_FORCE_BAUD,
-#else
-   0,
-#endif
-   NULL,
-   0}
+    {"/dev/console",
+     UART0_BASE_ADDRESS,
+     0,
+     0,
+     CONSOLE_USE_INTERRUPTS,
+     0,
+  #ifdef CONSOLE_FORCE_BAUD
+     CONSOLE_FORCE_BAUD,
+  #else
+     0,
+  #endif
+     NULL,
+     0,
+     0}
 
 #if (!BFIN_ON_SKYEYE)
 ,
@@ -56,10 +60,10 @@ static bfin_uart_config_t config = {
 
 #if CONSOLE_USE_INTERRUPTS
 static bfin_isr_t bfinUARTISRs[] = {
-  {SIC_DMA8_UART0_RX_VECTOR, bfin_uart_isr, 0, 0, NULL},
-  {SIC_DMA10_UART1_RX_VECTOR, bfin_uart_isr, 0, 0, NULL},
-  {SIC_DMA9_UART0_TX_VECTOR, bfin_uart_isr, 0, 0, NULL},
-  {SIC_DMA11_UART1_TX_VECTOR, bfin_uart_isr, 0, 0, NULL}
+  {SIC_DMA8_UART0_RX_VECTOR, bfinUart_rxIsr, 0, 0, NULL},
+  {SIC_DMA10_UART1_RX_VECTOR, bfinUart_rxIsr, 0, 0, NULL},
+  {SIC_DMA9_UART0_TX_VECTOR, bfinUart_txIsr, 0, 0, NULL},
+  {SIC_DMA11_UART1_TX_VECTOR, bfinUart_txIsr, 0, 0, NULL}
 };
 #endif
 

c/src/lib/libbsp/bfin/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-bfin],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([../bfin])
 RTEMS_TOP(../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define foreign 1.10])
+AM_INIT_AUTOMAKE([no-define foreign 1.11.1])
 AM_MAINTAINER_MODE
 
 RTEMS_ENV_RTEMSBSP

c/src/lib/libbsp/bfin/eZKit533/ChangeLog

@@ -1,3 +1,14 @@
+2011-04-20  Rohan Kangralkar <rkangral@ece.neu.edu>
+
+	PR 1781/bsps
+	* console/console-io.c: The UART RX and TX are different ISR
+	now. So the array containing the registeration changes. The
+	change is due to change in the libcup uart function.
+
+2011-02-02	Ralf Corsépius <ralf.corsepius@rtems.org>
+
+	* configure.ac: Require autoconf-2.68, automake-1.11.1.
+
 2009-12-11	Ralf Corsépius <ralf.corsepius@rtems.org>
 
 	* console/console-io.c: Let eZKit533_BSP_poll_char return int.

c/src/lib/libbsp/bfin/eZKit533/configure.ac

@@ -2,13 +2,13 @@
 ##
 ## $Id$
 
-AC_PREREQ(2.60)
+AC_PREREQ([2.68])
 AC_INIT([rtems-c-src-lib-libbsp-bfin-eZKit533],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
 AC_CONFIG_SRCDIR([bsp_specs])
 RTEMS_TOP(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1])
 RTEMS_BSP_CONFIGURE
 
 RTEMS_PROG_CC_FOR_TARGET

c/src/lib/libbsp/bfin/eZKit533/console/console-io.c

@@ -26,14 +26,18 @@
 
 static bfin_uart_channel_t channels[] = {
   {"/dev/console",
-   (char *) UART0_BASE_ADDRESS,
+   UART0_BASE_ADDRESS,
+   0,
+   0,
    CONSOLE_USE_INTERRUPTS,
+   0,
 #ifdef CONSOLE_FORCE_BAUD
    CONSOLE_FORCE_BAUD,
 #else
    0,
 #endif
    NULL,
+   0,
    0}
 };
 
@@ -45,8 +49,8 @@ static bfin_uart_config_t config = {
 
 #if CONSOLE_USE_INTERRUPTS
 static bfin_isr_t bfinUARTISRs[] = {
-  {SIC_DMA6_UART0_RX_VECTOR, bfin_uart_isr, 0, 0, NULL},
-  {SIC_DMA7_UART0_TX_VECTOR, bfin_uart_isr, 0, 0, NULL},
+  {SIC_DMA6_UART0_RX_VECTOR, bfinUart_rxIsr, 0, 0, NULL},
+  {SIC_DMA7_UART0_TX_VECTOR, bfinUart_txIsr, 0, 0, NULL},
 };
 #endif
 

c/src/lib/libbsp/c4x/ChangeLog

@@ -1,128 +0,0 @@
-2007-04-17	Joel Sherrill <joel@OARcorp.com>
-
-	* c4xsim/tools/runtest.in: Do not run pppd.exe from batch mode script.
-
-2006-12-02	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* configure.ac: New BUG-REPORT address.
-
-2006-10-17	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* configure.ac: Require autoconf-2.60. Require automake-1.10.
-
-2005-10-16	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Merge-in shared/Makefile.am.
-	* ChangeLog: Merge-in shared/ChangeLog.
-	* configure.ac: Remove shared/Makefile.am.
-
-2004-09-24	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* configure.ac: Require automake > 1.9.
-
-2004-03-31	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* shared/bspspuriousinit.c: Convert to using c99 fixed size types.
-
-2004-02-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: RTEMS_CHECK_BSPDIR([$RTEMS_BSP_FAMILY]).
-	* acinclude.m4: Regenerate.
-
-2004-01-13	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use @RTEMS_BSP_FAMILY@ instead of
-	$(RTEMS_BSP_FAMILY).
-
-2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Require automake >= 1.8, autoconf >= 2.59.
-
-2003-12-03	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* shared/Makefile.am: Remove C_FILES (Unused).
-
-2003-10-20	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* acinclude.m4: Reflect changes to bootstrap.
-	* configure.ac: Remove RTEMS_CHECK_CUSTON_BSP.
-
-2003-09-04	Joel Sherrill <joel@OARcorp.com>
-
-	* shared/bspspuriousinit.c, shared/c3xspurious.c,
-	shared/c4xspurious.c: URL for license changed.
-
-2003-08-18	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am, shared/Makefile.am: Reflect having moved automake/.
-
-2003-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Use rtems-bugs@rtems.com as bug report email
-	address.
-
-2003-03-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
-	* configure.ac: AC_PREREQ(2.57).
-
-2002-12-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove RTEMS_CHECK_BSP_CACHE.
-
-2002-10-21	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Reformat. Add autom4te*cache. Remove autom4te.cache.
-
-2002-03-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am, shared/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* configure.ac: AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
-	AM_INIT_AUTOMAKE([no-define foreign 1.6]).
-
-2002-01-03	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* shared/bspspuriousinit.c, shared/c3xspurious.c,
-	shared/c4xspurious.c: Include rtems/bspIo.h instead of bspIo.h.
-
-2001-10-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Add autom4te.cache for autoconf > 2.52.
-	* configure.ac: New file, generated from configure.in by autoupdate.
-	* configure.in: Remove.
-
-2001-10-09	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* acinclude.m4: New file.
-	* configure.in: Use RTEMS_BSP_SUBDIR.
-
-2000-11-09	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
-
-2000-11-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I
-	$(RTEMS_TOPdir)/aclocal.
-
-2000-10-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros. Switch to
-	GNU canonicalization.
-
-2000-09-04	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Formatting.
-
-2000-08-10	Joel Sherrill <joel@OARcorp.com>
-
-	* ChangeLog, shared/ChangeLog: New file.
-

c/src/lib/libbsp/c4x/Makefile.am

@@ -1,16 +0,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../aclocal
-
-## Descend into the @RTEMS_BSP_FAMILY@ directory
-SUBDIRS = @RTEMS_BSP_FAMILY@
-
-EXTRA_DIST =
-EXTRA_DIST += shared/bspspuriousinit.c
-EXTRA_DIST += shared/c3xspurious.c
-EXTRA_DIST += shared/c4xspurious.c
-
-include $(top_srcdir)/../../../automake/subdirs.am
-include $(top_srcdir)/../../../automake/local.am

c/src/lib/libbsp/c4x/acinclude.m4

@@ -1,10 +0,0 @@
-# RTEMS_CHECK_BSPDIR(RTEMS_BSP_FAMILY)
-AC_DEFUN([RTEMS_CHECK_BSPDIR],
-[
-  case "$1" in
-  c4xsim )
-    AC_CONFIG_SUBDIRS([c4xsim]);;
-  *)
-    AC_MSG_ERROR([Invalid BSP]);;
-  esac
-])

c/src/lib/libbsp/c4x/c4xsim/.cvsignore

@@ -1,8 +0,0 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.log
-config.status
-configure
-Makefile
-Makefile.in

c/src/lib/libbsp/c4x/c4xsim/ChangeLog

@@ -1,571 +0,0 @@
-2010-04-07	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* start/start.S: Verify boot_card() is passed a NULL.
-
-2009-10-21	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* make/custom/c3xsim.cfg: Remove RTEMS_BSP_FAMILY.
-	* make/custom/c4xsim.cfg: Remove RTEMS_BSP_FAMILY.
-
-2009-10-20	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* configure.ac: Don't add -ansi -fasm to CFLAGS.
-
-2009-10-15	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* make/custom/c3xsim.cfg: New (relocated from /make/custom).
-	* make/custom/c4xsim.cfg: New (relocated from /make/custom).
-
-2009-09-15	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* configure.ac: Remove RTEMS_BSP_BOOTCARD_OPTIONS.
-
- 2009-07-16	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* configure.ac: Rename BSP_BOOTCARD_OPTIONS to
-	RTEMS_BSP_BOOTCARD_OPTIONS. Add RTEMS_BSP_CLEANUP_OPTIONS so all BSPs
-	have the same options.
-
-2009-04-28	Chris Johns <chrisj@rtems.org>
-
-	* start/start.S: Update for boot_card command line change.
-
-2008-12-04	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* bsp_specs: Move -e start from *link to *startfile to avoid warning
-	for undefined entry symbol when linking relocatables with binutils
-	2.19.
-
-2008-09-30	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* clock/clock.c: include "../../../shared/clockdrv_shell.h".
-	* Makefile.am: Reflect changes above.
-
-2008-09-29	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Eliminate bsp.am. Build startup files as side-effect 
-	of building libbspstart.a, using automake-rules.
-
-2008-09-29	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Eliminate *_SOURCES.
-
-2008-09-29	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Move noinst_LIBRARIES = libbsp.a before its
-	components.
-
-2008-09-29	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Remove noinst_PROGRAMS (Unused).
-
-2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* configure.ac: Make letting boot_card() handle work area allocation
-	mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to
-	BSP_BOOTCARD_OPTIONS.
-
-2008-09-19	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* Makefile.am, console/debugio.c: Split out bspstart contents. Use
-	shared stub for bsp_start.
-	* startup/bsppretaskinghook.c: New file.
-	* startup/bspstart.c: Removed.
-
-2008-09-18	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* include/bsp.h: Remove unnecessary boilerplate comments.
-
-2008-09-16	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* Makefile.am, startup/linkcmds: Use top level shared
-	bsp_get_work_area() implementation.
-	* startup/bspgetworkarea.c: Removed.
-
-2008-09-16	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* clock/clock.c, startup/bspstart.c, startup/linkcmds: Add use of
-	bsp_get_work_area() in its own file and rely on BSP Framework to
-	perform more initialization.
-	* startup/bspgetworkarea.c: New file.
-
-2008-09-10	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* include/bsp.h: Review of all bsp_cleanup() implementations. In this
-	phase, all prototypes were removed from bsp.h and empty
-	implementations were removed and made to use the shared stub.
-
-2008-09-05	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* timer/timer.c: Convert to "bool".
-
-2008-08-31	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* timer/timer.c: Eliminate empty function from every benchmark timer
-	driver. Fix spelling.
-
-2008-08-31	Joel Sherrill <joel.sherrill@oarcorp.com>
-
-	* timer/timer.c: Rename timer driver methods to follow RTEMS
-	programming conventions.
-
-2008-05-15	Joel Sherrill <joel.sherrill@OARcorp.com>
-
-	* startup/bspstart.c: Add capability for bootcard.c BSP Initialization
-	Framework to ask the BSP where it has memory for the RTEMS Workspace
-	and C Program Heap. These collectively are referred to as work area.
-	If the BSP supports this, then it does not have to include code to
-	split the available memory between the two areas. This reduces the
-	amount of code in the BSP specific bspstart.c file. Additionally, the
-	shared framework can initialize the C Library, call
-	rtems_debug_enable(), and dirty the work area memory. Until most/all
-	BSPs support this new capability, if the BSP supports this, it should
-	call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
-	When the transition is complete, this autoconf macro can be removed.
-
-2008-05-14	Joel Sherrill <joel.sherrill@OARcorp.com>
-
-	* Makefile.am: Rework to avoid .rel files.
-
-2008-05-12	Joel Sherrill <joel.sherrill@OARcorp.com>
-
-	* startup/bspstart.c: Refactored and renamed initialization routines to
-	rtems_initialize_data_structures, rtems_initialize_before_drivers,
-	rtems_initialize_device_drivers, and
-	rtems_initialize_start_multitasking. This opened the sequence up so
-	that bootcard() could provide a more robust and flexible framework
-	which is easier to explain and understand. This also lays the
-	groundwork for sharing the division of available memory between the
-	RTEMS workspace and heap and the C library initialization across all
-	BSPs.
-
-2007-12-11	Joel Sherrill <joel.sherrill@OARcorp.com>
-
-	* clock/clock.c, include/bsp.h, startup/bspstart.c: Eliminate copies of
-	the Configuration Table. Use the RTEMS provided accessor macros to
-	obtain configuration fields.
-
-2007-12-04	Joel Sherrill <joel.sherrill@OARcorp.com>
-
-	* include/bsp.h, startup/bspstart.c: Move interrupt_stack_size field
-	from CPU Table to Configuration Table. Eliminate CPU Table from all
-	ports. Delete references to CPU Table in all forms.
-
-2007-12-03	Joel Sherrill <joel.sherrill@OARcorp.com>
-
-	* Makefile.am, startup/bspstart.c: Moved most of the remaining CPU
-	Table fields to the Configuration Table. This included
-	pretasking_hook, predriver_hook, postdriver_hook, idle_task,
-	do_zero_of_workspace, extra_mpci_receive_server_stack,
-	stack_allocate_hook, and stack_free_hook. As a side-effect of this
-	effort some multiprocessing code was made conditional and some style
-	clean up occurred.
-
-2007-05-11	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* clock/clock.c: include <tic4x/c4xio.h>.
-
-2007-04-12	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* bsp_specs: Remove qrtems_debug.
-
-2006-12-02	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* configure.ac: New BUG-REPORT address.
-
-2006-11-15	Joel Sherrill <joel@OARcorp.com>
-
-	* Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
-	file and simplified initialization.
-
-2006-10-17	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Remove superfluous -DASM.
-
-2006-10-17	Ralf Corsépius <ralf.corsepius@rtems.org>
-
-	* configure.ac: Require autoconf-2.60. Require automake-1.10.
-
-2006-05-31	Joel Sherrill <joel@OARcorp.com>
-
-	* clock/clock.c: Switch to using shared clock driver shell.
-
-2006-01-11	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Add preinstall.am.
-
-2005-05-26	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* include/bsp.h: New header guard.
-
-2005-02-02	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* include/tm27.h, timer/timer.c: #include <rtems/tic4x/c4xio.h>
-	instead of <rtems/tic4x/c4xio.h>.
-
-2005-01-07	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Eliminate CFLAGS_OPTIMIZE_V.
-
-2005-01-02	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Remove build-variant support.
-
-2004-09-24	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* configure.ac: Require automake > 1.9.
-
-2004-04-23	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	PR 610/bsps
-	* Makefile.am: Add include/tm27.h, Cosmetics.
-	* include/tm27.h: Final cosmetics.
-
-2004-04-22	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* include/bsp.h: Split out tmtest27 support.
-	* include/tm27.h: New.
-
-2004-04-21	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	PR 613/bsps
-	* include/bsp.h: Remove MAX_LONG_TEST_DURATION.
-
-2004-04-21	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	PR 614/bsps
-	* include/bsp.h: Remove MAX_SHORT_TEST_DURATION (Unused).
-
-2004-04-02	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* clock/clock.c, include/bsp.h, timer/timer.c: Include
-	<rtems/c4x/c4xio.h> instead of <c4xio.h>.
-
-2004-04-01	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* include/bsp.h: Include <rtems/clockdrv.h> instead of <clockdrv.h>.
-	* include/bsp.h: Include <rtems/console.h> instead of <console.h>.
-	* include/bsp.h: Include <rtems/iosupp.h> instead of <iosupp.h>.
-
-2004-03-31	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* clock/clock.c, include/bsp.h, startup/bspstart.c, timer/timer.c:
-	Convert to using c99 fixed size types.
-
-2004-02-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect changes to bsp.am. 
-	Preinstall dist_project_lib*.
-
-2004-02-14	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect changes to bsp.am.
-
-2004-02-14	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect changes to bsp.am.
-
-2004-02-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use CPPASCOMPILE instead of CCASCOMPILE.
-
-2004-02-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Pickup files from ../../c4x/shared instead of
-	../shared. Reformat.
-
-2004-01-29	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Merge-in clock/Makefile.am, console/Makefile.am,
-	start/Makefile.am, startup/Makefile.am, timer/Makefile.am,
-	wrapup/Makefile.am.
-	Use automake compilation rules.
-	* clock/Makefile.am, console/Makefile.am, start/Makefile.am,
-	startup/Makefile.am, timer/Makefile.am, wrapup/Makefile.am:
-	Remove.
-	* configure.ac: Reflect changes above.
-
-2004-01-28	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Add nostdinc to AUTOMAKE_OPTIONS.
-	Add RTEMS_PROG_CCAS.
-
-2004-01-21	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Add PREINSTALL_DIRS.
-
-2004-01-14	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Re-add dirstamps to PRE/TMPINSTALL_FILES.
-	Add PRE/TMPINSTALL_FILES to CLEANFILES.
-	* start/Makefile.am: Ditto.
-	* startup/Makefile.am: Ditto.
-
-2004-01-05	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* wrapup/Makefile.am: Eliminate $(LIB). 
-	Use noinst_DATA to trigger building libbsp.a.
-
-2003-12-13	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
-	* startup/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
-
-2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
-	* startup/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
-
-2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Require automake >= 1.8, autoconf >= 2.59.
-
-2003-12-09	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: Misc cleanups and fixes.
-	* startup/Makefile.am: Misc cleanups and fixes.
-	* wrapup/Makefile.am: Misc cleanups and fixes.
-
-2003-12-03	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Add preinstallation dirstamp support.
-	* clock/Makefile.am: Cosmetics.
-	* console/Makefile.am: Cosmetics.
-	* startup/Makefile.am: Cosmetics.
-	* timer/Makefile.am: Cosmetics.
-	* wrapup/Makefile.am: Cosmetics.
-
-2003-12-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am: Remove all-local: $(ARCH).
-	* console/Makefile.am: Remove all-local: $(ARCH).
-	* start/Makefile.am: Remove all-local: $(ARCH).
-	* startup/Makefile.am: Remove all-local: $(ARCH).
-	* timer/Makefile.am: Remove all-local: $(ARCH).
-	* wrapup/Makefile.am: Remove all-local: $(ARCH).
-
-2003-09-29	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Merge-in include/Makefile.am.
-	Reflect changes to bsp.am.
-	* include/Makefile.am: Remove.
-	* configure.ac: Reflect changes above.
-
-2003-09-17	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* bsp_specs: Remove *lib:.
-
-2003-09-04	Joel Sherrill <joel@OARcorp.com>
-
-	* clock/clock.c, console/console.c, console/consolereserveresources.c,
-	console/debugio.c, include/bsp.h, startup/bspstart.c,
-	startup/spurious.c, timer/timer.c: URL for license changed.
-
-2003-08-18	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved automake/.
-	* clock/Makefile.am: Reflect having moved automake/.
-	* console/Makefile.am: Reflect having moved automake/.
-	* include/Makefile.am: Reflect having moved automake/.
-	* start/Makefile.am: Reflect having moved automake/.
-	* startup/Makefile.am: Reflect having moved automake/.
-	* timer/Makefile.am: Reflect having moved automake/.
-	* wrapup/Makefile.am: Reflect having moved automake/.
-
-2003-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	PR 452/bsps
-	* startup/Makefile.am: Remove USE_INIT_FINI.
-
-2003-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Use rtems-bugs@rtems.com as bug report email address.
-
-2003-08-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	PR 445/bsps
-	* bsp_specs: Remove -D__embedded__ -Asystem(embedded) from cpp.
-	Remove cpp, old_cpp (now unused).
-
-2003-03-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
-
-2003-02-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: AC_PREREQ(2.57).
-
-2003-01-20	Joel Sherrill <joel@OARcorp.com>
-
-	* startup/linkcmds: Add FreeBSD SYSCTL() sections for networking.
-
-2002-12-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-
-2002-12-13	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-
-2002-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: Use install-data-local to install startfile.
-
-2002-12-10	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-
-2002-11-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove RTEMS_OUTPUT_BUILD_SUBDIRS. Cosmetical
-	changes.
-
-2002-10-21	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Reformat.
-	Add autom4te*cache.
-	Remove autom4te.cache.
-
-2002-09-14	Joel Sherrill <joel@OARcorp.com>
-
-	* clock/clock.c: Per PR257, remove reference to c3x_set_ie.
-	c4x variant should use c4x_set_iie().
-
-2002-08-21	Joel Sherrill <joel@OARcorp.com>
-
-	* bsp_specs: Added support for -nostdlibs.
-
-2002-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* console/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* start/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* startup/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* timer/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
-
-2002-07-20	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: Eliminate PGM.
-	Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o.
-
-2002-07-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* startup/Makefile.am: Add bsplib_DATA = linkcmds.
-
-2002-07-04	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* wrapup/Makefile.am: Eliminate TMPINSTALL_FILES.
-	Remove $(OBJS) from all-local.
-
-2002-06-29	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* wrapup/Makefile.am: Remove preinstallation of libbsp.a,
-
-2002-03-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac:
-	AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
-	AM_INIT_AUTOMAKE([no-define foreign 1.6]).
-	* clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* console/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* include/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* start/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* timer/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.
-
-2002-01-03	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* startup/bspstart.c: Include rtems/bspIo.h instead of bspIo.h.
-	* startup/spurious.c: Include rtems/bspIo.h instead of bspIo.h.
-
-2001-12-22	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu,
-	replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g.
-
-2001-11-30	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Introduce RTEMS_BSP_CONFIGURE.
-
-2001-10-12	Joel Sherrill <joel@OARcorp.com>
-
-	* console/console.c: Fixed typo.
-2001-10-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Add autom4te.cache for autoconf > 2.52.
-	* configure.in: Remove.
-	* configure.ac: New file, generated from configure.in by autoupdate.
-
-2001-09-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* include/Makefile.am: Use 'CLEANFILES ='.
-	* include/Makefile.am: Use 'PREINSTALL_FILES ='.
-
-2001-05-26	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.in: Add bspopts.h, fix PACKAGE.
-	* include/.cvsignore: Add bspopts.h*, stamp-h*.
-	* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
-	* include/bsp.h: Include bspopts.h.
-
-2001-05-10	Ralf Corsepius	<corsepiu@faw.uni-ulm.de>
-
-	* configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
-
-2000-12-06	Joel Sherrill <joel@OARcorp.com>
-
-	* console/consolereserveresources.c: Removed code NOT file (YET).
-
-2000-11-09	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
-
-2000-11-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
-
-2000-11-01	Joel Sherrill <joel@OARcorp.com>
-
-	* startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h,
-	and libcsupport.h moved from libc to lib/include/rtems and
-	now must be referenced as <rtems/XXX.h>.   Header file order
-	was cleaned up while doing this.
-
-2000-10-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.in, Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
-        Switch to GNU canonicalization.
-
-2000-09-22	Joel Sherrill <joel@OARcorp.com>
-
-	* startup/linkcmds: Use default object format to avoid name
-	changes in object format due to tool version changes.
-
-2000-09-04	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am, console/Makefile.am, start/Makefile.am,
-	startup/Makefile.am, timer/Makefile.am, wrapup/Makefile.am:
-	Include compile.am
-
-2000-08-10	Joel Sherrill <joel@OARcorp.com>
-
-	* ChangeLog: New file.

c/src/lib/libbsp/c4x/c4xsim/Makefile.am

@@ -1,54 +0,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../../aclocal
-
-# wrapup is the one that actually builds and installs the library
-# from the individual .rel files built in other directories
-SUBDIRS = . tools
-
-include $(top_srcdir)/../../../../automake/compile.am
-
-dist_project_lib_DATA = bsp_specs
-
-include_HEADERS = include/bsp.h
-include_HEADERS += include/tm27.h
-
-nodist_include_HEADERS = include/bspopts.h
-DISTCLEANFILES = include/bspopts.h
-
-include_HEADERS += include/simio.h
-nodist_include_HEADERS += ../../shared/include/coverhd.h
-
-noinst_LIBRARIES = libbspstart.a
-libbspstart_a_SOURCES = start/start.S
-project_lib_DATA = start.$(OBJEXT)
-
-dist_project_lib_DATA += startup/linkcmds
-
-noinst_LIBRARIES += libbsp.a
-libbsp_a_SOURCES =
-
-# startup
-libbsp_a_SOURCES += ../../shared/bspclean.c ../../shared/bsplibc.c \
-    ../../shared/bsppredriverhook.c ../../shared/bspgetworkarea.c \
-    ../../shared/bsppost.c startup/bsppretaksinghook.c ../../shared/bspstart.c \
-    ../../shared/bootcard.c ../../shared/sbrk.c ../../shared/setvec.c \
-    ../../c4x/shared/c3xspurious.c ../../c4x/shared/c4xspurious.c \
-    ../../c4x/shared/bspspuriousinit.c startup/spurious.c \
-    ../../shared/gnatinstallhandler.c
-# clock
-libbsp_a_SOURCES += clock/clock.c ../../../shared/clockdrv_shell.h
-# console
-libbsp_a_SOURCES += console/consolereserveresources.c console/debugio.c \
-    console/simio.c ../../shared/console.c
-# debugio
-libbsp_a_SOURCES += console/debugio.c
-# timer
-libbsp_a_SOURCES += timer/timer.c
-
-EXTRA_DIST = times
-
-include $(srcdir)/preinstall.am
-include $(top_srcdir)/../../../../automake/local.am

c/src/lib/libbsp/c4x/c4xsim/README

@@ -1,46 +0,0 @@
-#
-#  $Id$
-#
-
-BSP NAME:           c4xsim
-BOARD:              Simulator in GDB
-BUS:                N/A
-CPU FAMILY:         C3X/C4X
-CPU:                C32 and others
-COPROCESSORS:       N/A
-MODE:               32 bit mode
-
-DEBUG MONITOR:      gdb simulator
-
-PERIPHERALS
-===========
-TIMERS:             Internal Timer
-  RESOLUTION:         ???
-SERIAL PORTS:       simulated via 
-REAL-TIME CLOCK:    ???
-DMA:                none
-VIDEO:              none
-SCSI:               none
-NETWORKING:         none
-
-DRIVER INFORMATION
-==================
-CLOCK DRIVER:       ???
-IOSUPP DRIVER:      N/A
-SHMSUPP:            N/A
-TIMER DRIVER:       ???
-TTY DRIVER:         ???
-
-STDIO
-=====
-PORT:               Console port 0
-ELECTRICAL:         na
-BAUD:               na
-BITS PER CHARACTER: na
-PARITY:             na
-STOP BITS:          na
-
-Notes
-=====
-
-NONE

c/src/lib/libbsp/c4x/c4xsim/clock/clock.c

@@ -1,62 +0,0 @@
-/*  ckinit.c
- *
- *  This file provides a template for the clock device driver initialization.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <stdlib.h>
-
-#include <rtems.h>
-#include <bsp.h>
-#include <rtems/tic4x/c4xio.h>
-
-
-#define CLOCK_VECTOR    9
-
-#define Clock_driver_support_at_tick()
-
-#define Clock_driver_support_install_isr( _new, _old ) \
-  do { _old = 0; } while(0)
-
-void Clock_driver_support_initialize_hardware()
-{
-  extern int _ClockFrequency;
-  uint32_t Clock_counter_register_value;
-  float tmp;
-  int tmpi;
-
-  tmpi = ((int) &_ClockFrequency) * 1000000;  /* ClockFrequency is in Mhz */
-  tmp = (float) tmpi / 2.0;
-  tmp = ((float) rtems_configuration_get_microseconds_per_tick() / 1000000.0) * (tmp);
-
-  Clock_counter_register_value = (unsigned int) tmp;
-#if 0
-  Clock_counter_register_value =
-      (uint32_t) ((float) rtems_configuration_get_microseconds_per_tick() /
-       ((float)_ClockFrequency / 2.0)));
-#endif
-  c4x_timer_stop( C4X_TIMER_0 );
-  c4x_timer_set_counter( C4X_TIMER_0, 0 );
-  c4x_timer_set_period( C4X_TIMER_0, Clock_counter_register_value );
-  c4x_timer_start( C4X_TIMER_0 );
-
-#if defined(_C4x)
-  c4x_set_iee( c4x_get_iie() | 0x1 );  /* should be ETINT0 */
-#else
-  c3x_set_ie( c3x_get_ie() | 0x100 );
-#endif
-
-  Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 );
-}
-
-#define Clock_driver_support_shutdown_hardware()
-
-#include "../../../shared/clockdrv_shell.h"

c/src/lib/libbsp/c4x/c4xsim/configure.ac

@@ -1,24 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-##
-## $Id$
-
-AC_PREREQ(2.60)
-AC_INIT([rtems-c-src-lib-libbsp-c4x-c4xsim],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
-AC_CONFIG_SRCDIR([bsp_specs])
-RTEMS_TOP(../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
-RTEMS_BSP_CONFIGURE
-
-RTEMS_PROG_CC_FOR_TARGET
-RTEMS_CANONICALIZE_TOOLS
-RTEMS_PROG_CCAS
-
-RTEMS_CONFIG_BUILD_SUBDIRS(tools)
-
-RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT

c/src/lib/libbsp/c4x/c4xsim/console/console.c

@@ -1,153 +0,0 @@
-/*
- *  This file contains the hardware specific portions of the TTY driver
- *  for the serial ports on the erc32.
- *
- *  COPYRIGHT (c) 1989-1997.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <stdlib.h>
-#include <assert.h>
-
-#include <simio.h>
-
-/*
- *  console_outbyte_polled
- *
- *  This routine transmits a character using polling.
- */
-
-void console_outbyte_polled(
-  int  port,
-  char ch
-);
-
-/*
- *  console_inbyte_nonblocking
- *
- *  This routine polls for a character.
- */
-
-int console_inbyte_nonblocking(
-  int port
-);
-
-/*
- *  Console Termios Support Entry Points
- *
- */
-
-int console_write_support (
-  int minor,
-  const char *bufarg,
-  int len
-)
-{
-  int nwrite = 0;
-  const char *buf = bufarg;
-
-  while (nwrite < len) {
-    if ( *buf )
-      console_outbyte_polled( minor, *buf & 0x7f );
-    buf++;
-    nwrite++;
-  }
-  return nwrite;
-}
-
-/*
- *  Console Device Driver Entry Points
- *
- */
-
-rtems_device_driver console_initialize(
-  rtems_device_major_number  major,
-  rtems_device_minor_number  minor,
-  void                      *arg
-)
-{
-  rtems_status_code status;
-
-  rtems_termios_initialize();
-
-  /*
-   *  Register Device Names
-   */
-
-  status = rtems_io_register_name( "/dev/console", major, 0 );
-  if (status != RTEMS_SUCCESSFUL)
-    rtems_fatal_error_occurred(status);
-
-  return RTEMS_SUCCESSFUL;
-}
-
-rtems_device_driver console_open(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  rtems_status_code sc;
-  static const rtems_termios_callbacks pollCallbacks = {
-    NULL,                        /* firstOpen */
-    NULL,                        /* lastClose */
-    console_inbyte_nonblocking,  /* pollRead */
-    console_write_support,       /* write */
-    NULL,                        /* setAttributes */
-    NULL,                        /* stopRemoteTx */
-    NULL,                        /* startRemoteTx */
-    0                            /* outputUsesInterrupts */
-  };
-
-  assert( minor <= 1 );
-  if ( minor > 2 )
-    return RTEMS_INVALID_NUMBER;
-
-  sc = rtems_termios_open (major, minor, arg, &pollCallbacks );
-
-  return RTEMS_SUCCESSFUL;
-}
-
-rtems_device_driver console_close(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_close (arg);
-}
-
-rtems_device_driver console_read(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_read (arg);
-}
-
-rtems_device_driver console_write(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_write (arg);
-}
-
-rtems_device_driver console_control(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_ioctl (arg);
-}

c/src/lib/libbsp/c4x/c4xsim/console/consolereserveresources.c

@@ -1,19 +0,0 @@
-/*
- *  This file contains the TTY driver for the serial ports on the erc32.
- *
- *  This driver uses the termios pseudo driver.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <stdlib.h>
-#include <assert.h>

c/src/lib/libbsp/c4x/c4xsim/console/debugio.c

@@ -1,18 +0,0 @@
-/*
- *  COPYRIGHT (c) 1989-2008.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <bsp.h>
-#include <rtems/bspIo.h>
-
-extern void C4X_BSP_output_char(char c);
-
-BSP_output_char_function_type 		BSP_output_char = C4X_BSP_output_char;
-BSP_polling_getchar_function_type 	BSP_poll_char;

c/src/lib/libbsp/c4x/c4xsim/console/simio.c

@@ -1,308 +0,0 @@
-/*
- *  C4x simulator IO interface routines based on code provided
- *  by Herman ten Brugge <Haj.Ten.Brugge@net.HCC.nl>
- *
- *  $Id$
- */
-
-#include <stdio.h>
-
-#define	SIM_OPEN	(0xf0)
-#define	SIM_CLOSE	(0xf1)
-#define	SIM_READ	(0xf2)
-#define	SIM_WRITE	(0xf3)
-#define	SIM_LSEEK	(0xf4)
-#define	SIM_UNLINK	(0xf5)
-#define	SIM_GETENV	(0xf6)
-#define	SIM_RENAME	(0xf7)
-#define	SIM_GETTIME	(0xf8)
-#define	SIM_GETCLOCK	(0xf9)
-
-typedef union _io {
-  struct _open {
-    int	fd    : 16;
-    int	flags : 16;
-  } open;
-  struct _openr {
-    int	result : 16;
-  } openr;
-  struct _close {
-    int	fd     : 16;
-  } close;
-  struct _closer {
-    int	result : 16;
-  } closer;
-  struct _read {
-    int	fd    : 16;
-    int	count : 16;
-  } read;
-  struct _readr {
-    int	result : 16;
-  } readr;
-  struct _write {
-    int	fd    : 16;
-    int	count : 16;
-  } write;
-  struct _writer {
-    int	result : 16;
-  } writer;
-  struct _lseek {
-    int	fd         : 16;
-    int	offsetlow  : 16;
-    int	offsethigh : 16;
-    int	orgin	   : 16;
-  } lseek;
-  struct _lseekr {
-    int	result;
-  } lseekr;
-  struct _unlinkr {
-    int	result : 16;
-  } unlinkr;
-  struct _renamer {
-    int	result : 16;
-  } renamer;
-  struct _getenvr {
-    int	result : 16;
-  } getenvr;
-  struct _gettimer {
-    int	result;
-  } gettimer;
-  struct _getclockr {
-    int	result;
-  } getclockr;
-  struct _common {
-    int	word1;
-    int	word2;
-  } common;
-} io;
-
-static void to_sim(int command, io *param, char *data, int length);
-static void call_sim(void);
-static void from_sim(io *param, char *data);
-
-void sim_exit(void)
-{
-  __asm__(" .global C$$EXIT");
-  __asm__("C$$EXIT: nop");
-  __asm__("nop");
-}
-
-int sim_open(const char *path, unsigned flags, int fno)
-{
-  io param;
-
-  param.open.fd = fno;
-  param.open.flags = flags;
-  to_sim(SIM_OPEN,&param,(char *)path,strlen(path)+1);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.openr.result;
-}
-
-int sim_close(int fno)
-{
-  io param;
-
-  param.close.fd = fno;
-  to_sim(SIM_CLOSE,&param,NULL,0);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.closer.result;
-}
-
-int sim_read(int fno, char *buf, unsigned count)
-{
-  io param;
-
-  param.read.fd = fno;
-  param.read.count = count;
-  to_sim(SIM_READ,&param,NULL,0);
-  call_sim();
-  from_sim(&param, buf);
-  return param.readr.result;
-}
-
-int sim_write(int fno, const char *buf, unsigned count)
-{
-  io param;
-
-  param.write.fd = fno;
-  param.write.count = count;
-  to_sim(SIM_WRITE,&param,(char *)buf,count);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.writer.result;
-}
-
-fpos_t sim_lseek(int fno, fpos_t offset, int origin)
-{
-  io param;
-
-  param.lseek.fd = fno;
-  param.lseek.offsetlow = offset & 0xffff;
-  param.lseek.offsethigh = offset >> 16;
-  to_sim(SIM_LSEEK,&param,NULL,0);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.lseekr.result;
-}
-
-int sim_unlink(const char *path)
-{
-  io param;
-
-  to_sim(SIM_UNLINK,NULL,(char *)path,strlen(path)+1);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.unlinkr.result;
-}
-
-int sim_rename(const char *old, const char *new)
-{
-  int l;
-  static char combined[200];
-  io param;
-
-  strcpy(combined,old);
-  l = strlen(old)+1;
-  strcpy(combined+l,new);
-  l += strlen(new) + 1;
-  to_sim(SIM_RENAME,NULL,combined,l);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.renamer.result;
-}
-
-char *sim_getenv(const char *str)
-{
-  io param;
-  static char result[200];
-
-  to_sim(SIM_GETENV,NULL,(char *)str,strlen(str)+1);
-  call_sim();
-  from_sim(&param, result);
-  return param.getenvr.result ? result : NULL;
-}
-
-int sim_gettime(void)
-{
-  io param;
-
-  to_sim(SIM_GETTIME,NULL,NULL,0);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.gettimer.result;
-}
-
-int sim_getclock(void)
-{
-  io param;
-
-  to_sim(SIM_GETCLOCK,NULL,NULL,0);
-  call_sim();
-  from_sim(&param, NULL);
-  return param.getclockr.result;
-}
-
-int _CIOBUF_[BUFSIZ+32];
-
-static void to_sim(int command, io *param, char *data, int length)
-{
-  int i;
-  int n;
-  int v;
-  int *ip = &_CIOBUF_[0];
-
-  *ip++ = length;
-  *ip++ = command;
-  if (param) {
-    *ip++ = param->common.word1;
-    *ip++ = param->common.word2;
-  }
-  else {
-    *ip++ = 0;
-    *ip++ = 0;
-  }
-  n = length & ~3;
-  for (i = 0 ; i < n ; i += 4) {
-    v = *data++ & 0xff;
-    v |= (*data++ & 0xff) << 8;
-    v |= (*data++ & 0xff) << 16;
-    v |= (*data++ & 0xff) << 24;
-    *ip++ = v;
-  }
-  v = 0;
-  for ( ; i < length ; i++) {
-    v |= (*data++ & 0xff) << ((i & 3) << 3);
-  }
-  *ip = v;
-}
-
-static void call_sim(void)
-{
-  __asm__(" .global C$$IO$$");
-  __asm__("C$$IO$$: nop");
-}
-
-static void from_sim(io *param, char *data)
-{
-  int i;
-  int l;
-  int n;
-  int v;
-  int *ip = &_CIOBUF_[0];
-
-  l = *ip++;
-  param->common.word1 = *ip++;
-  param->common.word2 = *ip++;
-  if (data != NULL) {
-    n = l & ~3;
-    for (i = 0 ; i < n ; i += 4) {
-      v = *ip++;
-      *data++ = v & 0xff;
-      *data++ = (v >> 8) & 0xff;
-      *data++ = (v >> 16) & 0xff;
-      *data++ = (v >> 24) & 0xff;
-    }
-    v = *ip;
-    for (; i < l ; i++) {
-      *data++ = v >> ((i & 3) << 3);
-    }
-  }
-}
-
-#if 0
-#include <fcntl.h>
-sim_io_test()
-{
-sim_write(1, "howdy\n", 6);
-}
-#endif
-
-/*
- *  Debug junk
- */
-#if 0
-void printk_wrapper(void)
-{
-  __asm__(" .global _printf");
-  __asm__("_printf: bu	_printk");
-}
-#endif
-
-#if 1
-#ifdef _HAVE_STDC
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-int __svfscanf(
-     register FILE *fp,
-     char const *fmt0,
-     va_list ap
-)
-{
-  return 0;
-}
-#endif

c/src/lib/libbsp/c4x/c4xsim/include/.cvsignore

@@ -1,4 +0,0 @@
-bspopts.h
-bspopts.h.in
-stamp-h
-stamp-h.in

c/src/lib/libbsp/c4x/c4xsim/include/bsp.h

@@ -1,51 +0,0 @@
-/*  bsp.h
- *
- *  This include file contains all C4X Simulator IO definitions.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#ifndef _BSP_H
-#define _BSP_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <bspopts.h>
-
-#ifdef ASM
-
-#else
-#include <rtems.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-#include <rtems/console.h>
-#include <rtems/iosupp.h>
-
-/* functions */
-
-rtems_isr_entry set_vector(                    /* returns old vector */
-  rtems_isr_entry     handler,                  /* isr routine        */
-  rtems_vector_number vector,                   /* vector number      */
-  int                 type                      /* RTEMS or RAW intr  */
-);
-
-void BSP_fatal_return( void );
-
-void bsp_spurious_initialize( void );
-
-#endif /* ASM */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

c/src/lib/libbsp/c4x/c4xsim/include/simio.h

@@ -1,25 +0,0 @@
-/*
- *  C4x simulator IO interface routines based on code provided
- *  by Herman ten Brugge <Haj.Ten.Brugge@net.HCC.nl>
- *
- *  $Id$
- */
-
-#ifndef __C4X_SIMIO_IFACE_h
-#define __C4X_SIMIO_IFACE_h
-
-#include <stdio.h>
-
-void sim_exit(void);
-int sim_open(const char *path, int flags, int fno);
-int sim_close(int fno);
-int sim_read(int fno, char *buf, unsigned count);
-int sim_write(int fno, const char *buf, unsigned count);
-fpos_t sim_lseek(int fno, fpos_t offset, int origin);
-int sim_unlink(const char *path);
-int sim_rename(const char *old, const char *new);
-char *sim_getenv(const char *str);
-int sim_gettime(void);
-int sim_getclock(void);
-
-#endif

c/src/lib/libbsp/c4x/c4xsim/include/tm27.h

@@ -1,44 +0,0 @@
-/*
- *  tm27.h
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#ifndef _RTEMS_TMTEST27
-#error "This is an RTEMS internal file you must not include directly."
-#endif
-
-#ifndef __tm27_h
-#define __tm27_h
-
-/*
- *  Stuff for Time Test 27
- */
-
-#include <rtems/tic4x/c4xio.h>
-#define MUST_WAIT_FOR_INTERRUPT 0
-
-/* XXX */
-#define Install_tm27_vector( _handler ) \
-  set_vector( (_handler), 0x20, 1 )
-
-#define Cause_tm27_intr()  \
-  do { \
-     __asm__ volatile ( "trapu 0" ); \
-  } while (0)
-
-#define Clear_tm27_intr() \
-  do { \
-     ; \
-  } while (0)
-
-#define Lower_tm27_intr() \
-  do { \
-    c4x_global_interrupts_enable(); \
-  } while (0)
-
-#endif

c/src/lib/libbsp/c4x/c4xsim/make/custom/c3xsim.cfg

@@ -1,18 +0,0 @@
-#
-#  Configuration file for the GDB C4x simulator as a C3x
-#
-#  $Id$
-#
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-RTEMS_CPU_MODEL=c32
-
-#  This contains the compiler options necessary to select the CPU model
-#  and (hopefully) optimize for it.
-CPU_CFLAGS = -mcpu=32
-
-# optimize flag: typically -O2
-# -O2 is broken for the moment on the C4x gcc
-#CFLAGS_OPTIMIZE_V = -O2 
-CFLAGS_OPTIMIZE_V = -O1 -g

c/src/lib/libbsp/c4x/c4xsim/make/custom/c4xsim.cfg

@@ -1,18 +0,0 @@
-# 
-#  Configuration file for the GDB C4x simulator
-#
-#  $Id$
-#
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-RTEMS_CPU_MODEL=c40
-
-#  This contains the compiler options necessary to select the CPU model
-#  and (hopefully) optimize for it.
-CPU_CFLAGS = -mcpu=40 #-msmall
-
-# optimize flag: typically -O2
-# -O2 is broken for the moment on the C4x gcc
-#CFLAGS_OPTIMIZE_V = -O2 
-CFLAGS_OPTIMIZE_V = -O1 -g