Imagelibrary/rtems
1
0
Fork 1
mirror of https://gitlab.rtems.org/rtems/rtos/rtems.git synced 2025-12-26 06:08:20 +00:00
Code Issues Packages Projects Releases Wiki Activity

Changed BOOTP -> BOOTP/DHCP.

Browse Source
This commit is contained in:
Joel Sherrill
1998-11-19 17:08:20 +00:00
parent febb47e071
commit df4eb76e52
2 changed files with 12 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
doc/networking/networkapp.t
View File

@@ -68,7 +68,7 @@ and initializing the @code{rtems_bsdnet_configuration}
structure.
The structure entries are described in the following table.
If your application uses BOOTP to obtain network configuration
If your application uses BOOTP/DHCP to obtain network configuration
information and if you are happy with the default values described
below, you need to provide only the first two entries in this structure.
@@ -82,9 +82,10 @@ You must provide a value for this entry since there is no default value for it.
@item void (*bootp)(void)
This entry should be set to @code{rtems_bsdnet_do_bootp}
if your application will use BOOTP to obtain network configuration information.
if your application will use BOOTP/DHCP
to obtain network configuration information.
It should be set to @code{NULL}
if your application does not use BOOTP.
if your application does not use BOOTP/DHCP.
@item int network_task_priority
@@ -103,7 +104,7 @@ If a value of 0 is specified, 128 kbytes will be allocated.
@item char *hostname
The host name of the system.
If this, or any of the following, entries are @code{NULL} the value
may be obtained from a BOOTP server.
may be obtained from a BOOTP/DHCP server.
@item char *domainname
The name of the Internet domain to which the system belongs.
@@ -139,7 +140,7 @@ Network devices are specified and configured by declaring and initializing a
The structure entries are described in the following table. An application
which uses a single network interface, gets network configuration information
from a BOOTP server, and uses the default values for all driver
from a BOOTP/DHCP server, and uses the default values for all driver
parameters needs to initialize only the first two entries in the
structure.
@@ -166,13 +167,13 @@ last network interface.
The Internet address of the device,
specified in `dotted decimal' (@code{129.128.4.2}) form, or @code{NULL}
if the device configuration information is being obtained from a
BOOTP server.
BOOTP/DHCP server.
@item char *ip_netmask
The Internet inetwork mask of the device,
specified in `dotted decimal' (@code{255.255.255.0}) form, or @code{NULL}
if the device configuration information is being obtained from a
BOOTP server.
BOOTP/DHCP server.
@item void *hardware_address
@@ -204,7 +205,7 @@ A complete network configuration specification can be as simple as the one
shown in the following example.
This configuration uses a single network interface, gets
network configuration information
from a BOOTP server, and uses the default values for all driver
from a BOOTP/DHCP server, and uses the default values for all driver
parameters.
@example

6
doc/networking/testing.t
View File

@@ -95,12 +95,12 @@ workstations on your network.
@end itemize
@section BOOTP operation
@section BOOTP/DHCP operation
Set up a BOOTP server on the network.
Set up a BOOTP/DHCP server on the network.
Set define @code{RTEMS USE_BOOT} in @code{networkconfig.h}.
Run the @code{netdemo} test program.
Verify that the target system configures itself from the BOOTP server and
Verify that the target system configures itself from the BOOTP/DHCP server and
that all the above tests succeed.
@section Stress Tests