Toolchain/binutils-gdb
1
0
Fork 0
forked from Imagelibrary/binutils-gdb
Code Pull Requests Activity
Files
master
binutils-gdb/gdb/Makefile.in
Guinevere Larsen 809c1abc19 gdb, configure: Add enable-binary-file-format option for configure 
GDB has support for many binary file formats, some which might be very
unlikely to be found in some situations (such as the XCOFF format in
an x86 system). This commit introduces the option for a user to choose
which formats GDB will support at build configuration time.

This is especially useful to avoid possible security concerns with
readers that aren't expected to be used at all, as they are one of
the simplest vectors for an attacker to try and hit GDB with.  This
change can also reduce the size of the final binary, if that is a
concern.

This commit adds a switch to the configure script allowing a user to
only enable selected file formats, called --enable-binary-file-formats.
The default behavior when the switch is omitted is to compile all file
formats, keeping the original behavior of the script. At the time of
this commit, the valid options for this option are: dbx, coff (which
includes coff-pe), xcoff, mips, elf, macho and all. All is treated
especially, activating all supported readers.

A few targets may require specific binary file format support, as they
directly call functions defined by the file reader. Specifically,
windows targets require coff support, and rs6000 aix and lynx178 targets
require xcoff support. Considering that those formats are the main - or
only - one available in those targets, I believe it makes sense to
re-enable those readers. If that happens, the script will emit the
following warning:

  FOO is required to support one or more requested targets. Adding it

Users aren't able to force the disabling of those formats, since GDB
will not compile without those readers. Ideally we'd like to be able
to disable even those formats, in case a user wants to build GDB only
to examine remote files for example, but the current infrastructure
for the file format readers doesn't allow us to do it.

Mach-O and elf support are also dependent on BFD support being compiled
in.  In case one of those was requested and BFD does not support them,
the following error is emitted:

    FOO was requested, but BFD does not support it.

Finally, this configure switch is also printed by the "show
configuration" command in GDB.

Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Approved-By: Tom Tromey <tom@tromey.com>
2025-08-14 13:23:52 -03:00

2763 lines
70 KiB
Makefile
Raw Permalink Blame History

# Copyright (C) 1989-2025 Free Software Foundation, Inc.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Please keep lists in this file sorted alphabetically, with one item per line.
# Here are the general guidelines for ordering files and directories:
#
# - Files come before directories.
# - The extensions are not taken into account when comparing filenames, except
# if the filenames are otherwise equal.
# - A filename that is a prefix of another one comes before.
# - Underscores and dashes are treated equally, and come before alphanumeric
# characters.
#
# For example:
#
# SOME_FILES = \
# foo.c \
# foo.h \
# foo-bar.c \
# foobar.c \
# foo/bar.c
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
program_transform_name = @program_transform_name@
bindir = @bindir@
libdir = @libdir@
tooldir = $(libdir)/$(target_alias)
datadir = @datadir@
localedir = @localedir@
mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = @infodir@
datarootdir = @datarootdir@
docdir = @docdir@
htmldir = @htmldir@
pdfdir = @pdfdir@
includedir = @includedir@
install_sh = @install_sh@
# This can be referenced by `LIBINTL' as computed by
# ZW_GNU_GETTEXT_SISTER_DIR.
top_builddir = .
SHELL = @SHELL@
EXEEXT = @EXEEXT@
AWK = @AWK@
LN_S = @LN_S@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
DESTDIR =
AR = @AR@
AR_FLAGS = qv
RANLIB = @RANLIB@
DLLTOOL = @DLLTOOL@
WINDRES = @WINDRES@
MIG = @MIG@
STRIP = @STRIP@
XGETTEXT = @XGETTEXT@
GMSGFMT = @GMSGFMT@
MSGMERGE = msgmerge
PACKAGE = @PACKAGE@
CATALOGS = @CATALOGS@
CC = @CC@
CXX = @CXX@
CXX_DIALECT = @CXX_DIALECT@
# Dependency tracking information.
DEPMODE = @CCDEPMODE@
DEPDIR = @DEPDIR@
depcomp = $(SHELL) $(srcdir)/../depcomp
# Directory containing source files.
srcdir = @srcdir@
VPATH = @srcdir@
top_srcdir = @top_srcdir@
include $(srcdir)/silent-rules.mk
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
COMPILE.post = -c -o $@
POSTCOMPILE = @true
# CXXFLAGS is at the very end on purpose, so that user-supplied flags can
# override internal flags.
COMPILE = $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) $(CXXFLAGS) \
$(COMPILE.post)
YACC = @YACC@
# This is used to rebuild ada-lex.c from ada-lex.l. If the program is
# not defined, but ada-lex.c is present, compilation will continue,
# possibly with a warning.
FLEX = flex
YLWRAP = $(srcdir)/../ylwrap
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO = @MAKEINFO@
MAKEINFOFLAGS = @MAKEINFOFLAGS@
MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
MAKEHTML = $(MAKEINFO_CMD) --html
MAKEHTMLFLAGS =
LIBTOOL = @LIBTOOL@
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefined references.
#CC_LD = g++ -static
CC_LD = $(LIBTOOL) $(SILENT_FLAG) --mode=link $(CXX) $(CXX_DIALECT)
# Where is our "include" directory? Typically $(srcdir)/../include.
# This is essentially the header file directory for the library
# routines in libiberty.
INCLUDE_DIR = $(srcdir)/../include
INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
# Where is the "-liberty" library? Typically in ../libiberty.
LIBIBERTY = ../libiberty/libiberty.a
# Where is the CTF library? Typically in ../libctf.
LIBCTF = @LIBCTF@
CTF_DEPS = @CTF_DEPS@
# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.la
BFD_SRC = $(srcdir)/$(BFD_DIR)
BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
ZSTD_CFLAGS = @ZSTD_CFLAGS@
ZSTD_LIBS = @ZSTD_LIBS@
# Where is the decnumber library? Typically in ../libdecnumber.
LIBDECNUMBER_DIR = ../libdecnumber
LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
# Where is the READLINE library? Typically in ../readline/readline.
READLINE_DIR = ../readline/readline
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE = @READLINE@
READLINE_DEPS = @READLINE_DEPS@
READLINE_CFLAGS = @READLINE_CFLAGS@
# Where is expat? This will be empty if expat was not available.
LIBEXPAT = @LIBEXPAT@
# Where is lzma? This will be empty if lzma was not available.
LIBLZMA = @LIBLZMA@
# Where is libbabeltrace? This will be empty if libbabeltrace was not
# available.
LIBBABELTRACE = @LIBBABELTRACE@
# Where is libxxhash? This will be empty if libxxhash was not
# available.
LIBXXHASH = @LIBXXHASH@
# Where is libipt? This will be empty if libipt was not available.
LIBIPT = @LIBIPT@
# How to find GMP and MPFR
GMPLIBS = @GMPLIBS@
GMPINC = @GMPINC@
# GNU source highlight library.
SRCHIGH_LIBS = @SRCHIGH_LIBS@
SRCHIGH_CFLAGS = @SRCHIGH_CFLAGS@
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
AMD_DBGAPI_CFLAGS = @AMD_DBGAPI_CFLAGS@
AMD_DBGAPI_LIBS = @AMD_DBGAPI_LIBS@
RDYNAMIC = @RDYNAMIC@
# Where is the INTL library? Typically in ../intl.
INTL = @LIBINTL@
INTL_DEPS = @LIBINTL_DEP@
INTL_CFLAGS = @INCINTL@
# Where is the ICONV library? This will be empty if in libc or not available.
LIBICONV = @LIBICONV@
# Did the user give us a --with-gdb-datadir option?
GDB_DATADIR = @GDB_DATADIR@
# Code signing.
CODESIGN = codesign
CODESIGN_CERT = @CODESIGN_CERT@
# Flags to pass to gdb when invoked with "make run".
GDBFLAGS =
# Helper code from gnulib.
GNULIB_PARENT_DIR = ..
include $(GNULIB_PARENT_DIR)/gnulib/Makefile.gnulib.inc
# For libbacktrace.
LIBBACKTRACE_INC=@LIBBACKTRACE_INC@
LIBBACKTRACE_LIB=@LIBBACKTRACE_LIB@
SUPPORT = ../gdbsupport
LIBSUPPORT = $(SUPPORT)/libgdbsupport.a
INCSUPPORT = \
-I$(srcdir)/.. \
-I..
#
# CLI sub directory definitions
#
SUBDIR_CLI_SRCS = \
cli/cli-cmds.c \
cli/cli-decode.c \
cli/cli-dump.c \
cli/cli-interp.c \
cli/cli-logging.c \
cli/cli-option.c \
cli/cli-script.c \
cli/cli-setshow.c \
cli/cli-style.c \
cli/cli-utils.c
SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
#
# MI sub directory definitions
#
SUBDIR_MI_SRCS = \
mi/mi-cmd-break.c \
mi/mi-cmd-catch.c \
mi/mi-cmd-disas.c \
mi/mi-cmd-env.c \
mi/mi-cmd-file.c \
mi/mi-cmd-info.c \
mi/mi-cmd-stack.c \
mi/mi-cmd-target.c \
mi/mi-cmd-var.c \
mi/mi-cmds.c \
mi/mi-common.c \
mi/mi-console.c \
mi/mi-getopt.c \
mi/mi-interp.c \
mi/mi-main.c \
mi/mi-out.c \
mi/mi-parse.c \
mi/mi-symbol-cmds.c
SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
#
# TUI sub directory definitions
#
SUBDIR_TUI_SRCS = \
tui/tui.c \
tui/tui-command.c \
tui/tui-data.c \
tui/tui-disasm.c \
tui/tui-file.c \
tui/tui-hooks.c \
tui/tui-interp.c \
tui/tui-io.c \
tui/tui-layout.c \
tui/tui-location.c \
tui/tui-regs.c \
tui/tui-source.c \
tui/tui-status.c \
tui/tui-win.c \
tui/tui-wingeneral.c \
tui/tui-winsource.c
SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
SUBDIR_TUI_DEPS =
SUBDIR_TUI_LDFLAGS =
SUBDIR_TUI_CFLAGS = -DTUI=1
#
# GCC Compile support sub-directory definitions
#
SUBDIR_GCC_COMPILE_SRCS = \
compile/compile.c \
compile/compile-c-support.c \
compile/compile-c-symbols.c \
compile/compile-c-types.c \
compile/compile-cplus-symbols.c \
compile/compile-cplus-types.c \
compile/compile-loc2c.c \
compile/compile-object-load.c \
compile/compile-object-run.c
SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
#
# Guile sub directory definitions for guile support.
#
SUBDIR_GUILE_SRCS = \
guile/guile.c \
guile/scm-arch.c \
guile/scm-auto-load.c \
guile/scm-block.c \
guile/scm-breakpoint.c \
guile/scm-cmd.c \
guile/scm-color.c \
guile/scm-disasm.c \
guile/scm-exception.c \
guile/scm-frame.c \
guile/scm-gsmob.c \
guile/scm-iterator.c \
guile/scm-lazy-string.c \
guile/scm-math.c \
guile/scm-objfile.c \
guile/scm-param.c \
guile/scm-ports.c \
guile/scm-pretty-print.c \
guile/scm-progspace.c \
guile/scm-safe-call.c \
guile/scm-string.c \
guile/scm-symbol.c \
guile/scm-symtab.c \
guile/scm-type.c \
guile/scm-utils.c \
guile/scm-value.c
SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
SUBDIR_GUILE_DEPS =
SUBDIR_GUILE_LDFLAGS =
SUBDIR_GUILE_CFLAGS =
#
# python sub directory definitions
#
SUBDIR_PYTHON_SRCS = \
python/py-arch.c \
python/py-auto-load.c \
python/py-block.c \
python/py-bpevent.c \
python/py-breakpoint.c \
python/py-cmd.c \
python/py-color.c \
python/py-connection.c \
python/py-continueevent.c \
python/py-dap.c \
python/py-disasm.c \
python/py-event.c \
python/py-evtregistry.c \
python/py-evts.c \
python/py-exitedevent.c \
python/py-finishbreakpoint.c \
python/py-frame.c \
python/py-framefilter.c \
python/py-function.c \
python/py-gdb-readline.c \
python/py-inferior.c \
python/py-infevents.c \
python/py-infthread.c \
python/py-instruction.c \
python/py-lazy-string.c \
python/py-linetable.c \
python/py-membuf.c \
python/py-mi.c \
python/py-micmd.c \
python/py-newobjfileevent.c \
python/py-objfile.c \
python/py-param.c \
python/py-prettyprint.c \
python/py-progspace.c \
python/py-record.c \
python/py-record-btrace.c \
python/py-record-full.c \
python/py-registers.c \
python/py-signalevent.c \
python/py-stopevent.c \
python/py-symbol.c \
python/py-symtab.c \
python/py-threadevent.c \
python/py-tui.c \
python/py-type.c \
python/py-unwind.c \
python/py-utils.c \
python/py-value.c \
python/py-varobj.c \
python/py-xmethods.c \
python/python.c
SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
SUBDIR_PYTHON_DEPS =
SUBDIR_PYTHON_LDFLAGS =
SUBDIR_PYTHON_CFLAGS =
SELFTESTS_SRCS = \
disasm-selftests.c \
gdbarch-selftests.c \
selftest-arch.c \
unittests/array-view-selftests.c \
unittests/child-path-selftests.c \
unittests/cli-utils-selftests.c \
unittests/command-def-selftests.c \
unittests/common-utils-selftests.c \
unittests/copy_bitwise-selftests.c \
unittests/enum-flags-selftests.c \
unittests/environ-selftests.c \
unittests/filtered_iterator-selftests.c \
unittests/format_pieces-selftests.c \
unittests/frame_info_ptr-selftests.c \
unittests/function-view-selftests.c \
unittests/gdb_tilde_expand-selftests.c \
unittests/gmp-utils-selftests.c \
unittests/intrusive_list-selftests.c \
unittests/lookup_name_info-selftests.c \
unittests/memory-map-selftests.c \
unittests/memrange-selftests.c \
unittests/offset-type-selftests.c \
unittests/observable-selftests.c \
unittests/packed-selftests.c \
unittests/parallel-for-selftests.c \
unittests/parse-connection-spec-selftests.c \
unittests/path-join-selftests.c \
unittests/ptid-selftests.c \
unittests/main-thread-selftests.c \
unittests/mkdir-recursive-selftests.c \
unittests/remote-arg-selftests.c \
unittests/rsp-low-selftests.c \
unittests/scoped_fd-selftests.c \
unittests/scoped_ignore_signal-selftests.c \
unittests/scoped_mmap-selftests.c \
unittests/scoped_restore-selftests.c \
unittests/search-memory-selftests.c \
unittests/style-selftests.c \
unittests/tracepoint-selftests.c \
unittests/tui-selftests.c \
unittests/ui-file-selftests.c \
unittests/unique_xmalloc_ptr_char.c \
unittests/unpack-selftests.c \
unittests/vec-utils-selftests.c \
unittests/xml-utils-selftests.c
SELFTESTS_OBS = $(patsubst %.c,%.o,$(SELFTESTS_SRCS))
SUBDIR_TARGET_SRCS = target/target.c target/waitstatus.c
SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
# Where is the "-lopcodes" library, with (some of) the opcode tables and
# disassemblers?
OPCODES_DIR = ../opcodes
OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
OPCODES = $(OPCODES_DIR)/libopcodes.la
# Where are the other opcode tables which only have header file
# versions?
OP_INCLUDE = $(INCLUDE_DIR)/opcode
# See TOP_CFLAGS as well.
OPCODES_CFLAGS = -I$(OP_INCLUDE)
# Allow includes like "opcodes/mumble.h".
TOP_CFLAGS = -I$(top_srcdir)/..
# The simulator is usually nonexistent; targets that include one
# should set this to list all the .o or .a files to be linked in.
SIM = @SIM@
WIN32LIBS = @WIN32LIBS@
# Tcl et al cflags and libraries
TCL = @TCL_LIBRARY@
TCL_CFLAGS = @TCL_INCLUDE@
GDBTKLIBS = @GDBTKLIBS@
# Extra flags that the GDBTK files need:
GDBTK_CFLAGS = @GDBTK_CFLAGS@
TK = @TK_LIBRARY@
TK_CFLAGS = @TK_INCLUDE@
X11_CFLAGS = @TK_XINCLUDES@
X11_LDFLAGS =
X11_LIBS =
WIN32LDAPP = @WIN32LDAPP@
LIBGUI = @LIBGUI@
GUI_CFLAGS_X = @GUI_CFLAGS_X@
IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
# The version of gdbtk we're building. This should be kept
# in sync with GDBTK_VERSION and friends in gdbtk.h.
GDBTK_VERSION = 1.0
GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
# Gdbtk requires an absolute path to the source directory or
# the testsuite won't run properly.
GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
SUBDIR_GDBTK_OBS = \
gdbtk.o \
gdbtk-bp.o \
gdbtk-cmds.o \
gdbtk-hooks.o \
gdbtk-interp.o \
gdbtk-register.o \
gdbtk-stack.o \
gdbtk-varobj.o \
gdbtk-wrapper.o
SUBDIR_GDBTK_SRCS = \
gdbtk/generic/gdbtk.c \
gdbtk/generic/gdbtk-bp.c \
gdbtk/generic/gdbtk-cmds.c \
gdbtk/generic/gdbtk-hooks.c \
gdbtk/generic/gdbtk-interp.c \
gdbtk/generic/gdbtk-main.c \
gdbtk/generic/gdbtk-register.c \
gdbtk/generic/gdbtk-stack.c \
gdbtk/generic/gdbtk-varobj.c \
gdbtk/generic/gdbtk-wrapper.c
SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
SUBDIR_GDBTK_LDFLAGS =
SUBDIR_GDBTK_CFLAGS = -DGDBTK
CONFIG_OBS = @CONFIG_OBS@
CONFIG_SRCS = @CONFIG_SRCS@
CONFIG_DEPS = @CONFIG_DEPS@
CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
ENABLE_CFLAGS = @ENABLE_CFLAGS@
CONFIG_ALL = @CONFIG_ALL@
CONFIG_CLEAN = @CONFIG_CLEAN@
CONFIG_INSTALL = @CONFIG_INSTALL@
CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
HAVE_GSTACK = @HAVE_GSTACK@
CONFIG_SRC_SUBDIR = arch cli dwarf2 mi compile tui unittests guile python \
target nat
CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
# -I. for config files.
# -I$(srcdir) for gdb internal headers.
# -I$(srcdir)/config for more generic config files.
# It is also possible that you will need to add -I/usr/include/sys if
# your system doesn't have fcntl.h in /usr/include (which is where it
# should be according to Posix).
DEFS = @DEFS@
GDB_INCLUDED_HEADER = -include $(srcdir)/defs.h
GDB_CFLAGS = \
-I. \
-I$(srcdir) \
-I$(srcdir)/config \
$(GDB_INCLUDED_HEADER) \
-DLOCALEDIR="\"$(localedir)\"" \
$(DEFS)
# MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
GLOBAL_CFLAGS = $(MH_CFLAGS)
PROFILE_CFLAGS = @PROFILE_CFLAGS@
# These are specifically reserved for setting from the command line
# when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
CFLAGS = @CFLAGS@
CXXFLAGS = @CXXFLAGS@
CPPFLAGS = @CPPFLAGS@
# Set by configure, for e.g. expat. Python installations are such that
# C headers are included using their basename (for example, we #include
# <Python.h> rather than, say, <python/Python.h>). Since the file names
# are sometimes a little generic, we think that the risk of collision
# with other header files is high. If that happens, we try to mitigate
# a bit the consequences by putting the Python includes last in the list.
INTERNAL_CPPFLAGS = $(CPPFLAGS) @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@ \
@LARGEFILE_CPPFLAGS@
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS = \
$(GLOBAL_CFLAGS) \
$(PROFILE_CFLAGS) \
$(GDB_CFLAGS) \
$(OPCODES_CFLAGS) \
$(BFD_CFLAGS) \
$(INCLUDE_CFLAGS) \
$(READLINE_CFLAGS) \
$(ZLIBINC) \
$(ZSTD_CFLAGS) \
$(LIBDECNUMBER_CFLAGS) \
$(INTL_CFLAGS) \
$(INCGNU) \
$(INCSUPPORT) \
$(LIBBACKTRACE_INC) \
$(ENABLE_CFLAGS) \
$(INTERNAL_CPPFLAGS) \
$(SRCHIGH_CFLAGS) \
$(TOP_CFLAGS) \
$(PTHREAD_CFLAGS) \
$(DEBUGINFOD_CFLAGS) \
$(GMPINC) \
$(AMD_DBGAPI_CFLAGS) \
$(GDB_WARN_CFLAGS) \
$(GDB_WERROR_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
LDFLAGS = @LDFLAGS@
# Profiling options need to go here to work.
# I think it's perfectly reasonable for a user to set -pg in CFLAGS
# and have it work; that's why CFLAGS is here.
# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
INTERNAL_LDFLAGS = \
$(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
$(LDFLAGS) $(CONFIG_LDFLAGS) $(PTHREAD_CFLAGS)
# Libraries and corresponding dependencies for compiling gdb.
# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(LIBCTF) $(BFD) $(ZLIB) $(ZSTD_LIBS) \
$(LIBSUPPORT) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(GDBTKLIBS) $(LIBBACKTRACE_LIB) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ $(AMD_DBGAPI_LIBS) \
$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
$(WIN32LIBS) $(LIBGNU) $(LIBGNU_EXTRA_LIBS) $(LIBICONV) \
$(GMPLIBS) $(SRCHIGH_LIBS) $(LIBXXHASH) $(PTHREAD_LIBS) \
$(DEBUGINFOD_LIBS) $(LIBBABELTRACE_LIB)
CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) $(CTF_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
$(LIBSUPPORT)
DIST = gdb
RUNTEST = runtest
RUNTESTFLAGS =
# XML files to build in to GDB.
XMLFILES = \
$(srcdir)/features/btrace.dtd \
$(srcdir)/features/btrace-conf.dtd \
$(srcdir)/features/gdb-target.dtd \
$(srcdir)/features/library-list.dtd \
$(srcdir)/features/library-list-aix.dtd \
$(srcdir)/features/library-list-svr4.dtd \
$(srcdir)/features/osdata.dtd \
$(srcdir)/features/threads.dtd \
$(srcdir)/features/traceframe-info.dtd \
$(srcdir)/features/xinclude.dtd
# Build the ser-*.o files the host supports. This includes ser-unix.o
# for any system that supports a POSIX interface to the serial port.
# See configure.ac.
SER_HARDWIRE = @SER_HARDWIRE@
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS = @SIM_OBS@
# Target-dependent object files.
TARGET_OBS = @TARGET_OBS@
# All target-dependent object files that require the amd-dbgapi
# target to be available (used with --enable-targets=all).
ALL_AMD_DBGAPI_TARGET_OBS = \
amdgpu-tdep.o \
solib-rocm.o
# All target-dependent objects files that require 64-bit CORE_ADDR
# (used with --enable-targets=all --enable-64-bit-bfd).
ALL_64_TARGET_OBS = \
aarch64-fbsd-tdep.o \
aarch64-linux-tdep.o \
aarch64-newlib-tdep.o \
aarch64-ravenscar-thread.o \
aarch64-tdep.o \
alpha-bsd-tdep.o \
alpha-linux-tdep.o \
alpha-mdebug-tdep.o \
alpha-netbsd-tdep.o \
alpha-obsd-tdep.o \
alpha-tdep.o \
amd64-darwin-tdep.o \
amd64-dicos-tdep.o \
amd64-fbsd-tdep.o \
amd64-gnu-tdep.o \
amd64-linux-tdep.o \
amd64-netbsd-tdep.o \
amd64-obsd-tdep.o \
amd64-ravenscar-thread.o \
amd64-sol2-tdep.o \
amd64-tdep.o \
amd64-windows-tdep.o \
arch/aarch64.o \
arch/aarch64-insn.o \
arch/aarch64-mte.o \
arch/aarch64-mte-linux.o \
arch/aarch64-scalable-linux.o \
arch/amd64-linux-tdesc.o \
arch/amd64.o \
arch/riscv.o \
bpf-tdep.o \
ia64-linux-tdep.o \
ia64-tdep.o \
ia64-vms-tdep.o \
loongarch-linux-tdep.o \
loongarch-tdep.o \
mips-fbsd-tdep.o \
mips-linux-tdep.o \
mips-netbsd-tdep.o \
mips-sde-tdep.o \
mips-tdep.o \
mips64-obsd-tdep.o \
riscv-canonicalize-syscall-gen.o \
riscv-fbsd-tdep.o \
riscv-linux-tdep.o \
riscv-none-tdep.o \
riscv-ravenscar-thread.o \
riscv-tdep.o \
sparc64-fbsd-tdep.o \
sparc64-linux-tdep.o \
sparc64-netbsd-tdep.o \
sparc64-obsd-tdep.o \
sparc64-sol2-tdep.o \
sparc64-tdep.o \
tilegx-linux-tdep.o \
tilegx-tdep.o
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
aarch32-tdep.o \
arc-linux-tdep.o \
arc-newlib-tdep.o \
arc-tdep.o \
arch/aarch32.o \
arch/arc.o \
arch/arm.o \
arch/arm-get-next-pcs.o \
arch/arm-linux.o \
arch/i386-linux-tdesc.o \
arch/i386.o \
arch/loongarch.o \
arch/ppc-linux-common.o \
arch/x86-linux-tdesc-features.o \
arm-bsd-tdep.o \
arm-fbsd-tdep.o \
arm-linux-tdep.o \
arm-netbsd-tdep.o \
arm-none-tdep.o \
arm-obsd-tdep.o \
arm-pikeos-tdep.o \
arm-tdep.o \
arm-wince-tdep.o \
avr-tdep.o \
bfin-linux-tdep.o \
bfin-tdep.o \
bsd-uthread.o \
cris-linux-tdep.o \
cris-tdep.o \
csky-linux-tdep.o \
csky-tdep.o \
dicos-tdep.o \
fbsd-tdep.o \
frv-linux-tdep.o \
frv-tdep.o \
ft32-tdep.o \
glibc-tdep.o \
h8300-tdep.o \
hppa-bsd-tdep.o \
hppa-linux-tdep.o \
hppa-netbsd-tdep.o \
hppa-obsd-tdep.o \
hppa-tdep.o \
i386-bsd-tdep.o \
i386-darwin-tdep.o \
i386-dicos-tdep.o \
i386-fbsd-tdep.o \
i386-gnu-tdep.o \
i386-go32-tdep.o \
i386-linux-tdep.o \
i386-netbsd-tdep.o \
i386-obsd-tdep.o \
i386-sol2-tdep.o \
i386-tdep.o \
i386-windows-tdep.o \
i387-tdep.o \
iq2000-tdep.o \
linux-record.o \
linux-tdep.o \
lm32-tdep.o \
m32c-tdep.o \
m32r-linux-tdep.o \
m32r-tdep.o \
m68hc11-tdep.o \
m68k-bsd-tdep.o \
m68k-linux-tdep.o \
m68k-tdep.o \
mep-tdep.o \
microblaze-linux-tdep.o \
microblaze-tdep.o \
mn10300-linux-tdep.o \
mn10300-tdep.o \
moxie-tdep.o \
msp430-tdep.o \
netbsd-tdep.o \
nds32-tdep.o \
obsd-tdep.o \
or1k-linux-tdep.o \
or1k-tdep.o \
ppc-fbsd-tdep.o \
ppc-linux-tdep.o \
ppc-netbsd-tdep.o \
ppc-obsd-tdep.o \
ppc-ravenscar-thread.o \
ppc-sysv-tdep.o \
ppc64-tdep.o \
ravenscar-thread.o \
rl78-tdep.o \
rs6000-aix-tdep.o \
rs6000-lynx178-tdep.o \
rs6000-tdep.o \
rx-tdep.o \
s12z-tdep.o \
s390-linux-tdep.o \
s390-tdep.o \
sh-linux-tdep.o \
sh-netbsd-tdep.o \
sh-tdep.o \
sol2-tdep.o \
solib-aix.o \
solib-darwin.o \
solib-dsbt.o \
solib-frv.o \
solib-svr4.o \
solib-svr4-linux.o \
sparc-linux-tdep.o \
sparc-netbsd-tdep.o \
sparc-obsd-tdep.o \
sparc-ravenscar-thread.o \
sparc-sol2-tdep.o \
sparc-tdep.o \
svr4-tls-tdep.o \
symfile-mem.o \
tic6x-linux-tdep.o \
tic6x-tdep.o \
v850-tdep.o \
vax-netbsd-tdep.o \
vax-tdep.o \
windows-tdep.o \
x86-tdep.o \
xstormy16-tdep.o \
xtensa-config.o \
xtensa-linux-tdep.o \
xtensa-tdep.o \
z80-tdep.o
# Object files for reading specific types of debug information.
coff_SRCS = coffread.c coff-pe-read.c
dbx_SRCS = dbxread.c
elf_SRCS = elfread.c stap-probe.c dtrace-probe.c
macho_SRCS = machoread.c
mips_SRCS = mipsread.c
xcoff_SRCS = xcoffread.c
FORMAT_SRCS = @FORMAT_SRCS@
FORMAT_OBS = $(patsubst %.c,%.o,$(FORMAT_SRCS))
# The following native-target dependent variables are defined on
# configure.nat.
NAT_FILE = @NAT_FILE@
NATDEPFILES = @NATDEPFILES@
NAT_CDEPS = @NAT_CDEPS@
LOADLIBES = @LOADLIBES@
MH_CFLAGS = @MH_CFLAGS@
XM_CLIBS = @XM_CLIBS@
NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
NM_H = @NM_H@
HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
# Native-target dependent makefile fragment comes in here.
@nat_makefile_frag@
# End of native-target dependent variables.
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"datarootdir=$(datarootdir)" \
"docdir=$(docdir)" \
"htmldir=$(htmldir)" \
"pdfdir=$(pdfdir)" \
"libdir=$(libdir)" \
"mandir=$(mandir)" \
"datadir=$(datadir)" \
"includedir=$(includedir)" \
"against=$(against)" \
"DESTDIR=$(DESTDIR)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"CXX=$(CXX)" \
"CXX_DIALECT=$(CXX_DIALECT)" \
"CXXFLAGS=$(CXXFLAGS)" \
"DLLTOOL=$(DLLTOOL)" \
"LDFLAGS=$(LDFLAGS)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
"MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
"MAKEHTML=$(MAKEHTML)" \
"MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
# Flags that we pass when building the testsuite.
# empty for native, $(target_alias)/ for cross
target_subdir = @target_subdir@
CC_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CXX_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xg++ ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
fi; \
fi`
# The use of $$(x_FOR_TARGET) reduces the command line length by not
# duplicating the lengthy definition.
TARGET_FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
'CC=$$(CC_FOR_TARGET)' \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
'CXX=$$(CXX_FOR_TARGET)' \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"CXXFLAGS=$(CXXFLAGS)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"MAKEINFO=$(MAKEINFO)" \
"MAKEHTML=$(MAKEHTML)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"FORCE_PARALLEL=$(FORCE_PARALLEL)" \
"TESTS=$(TESTS)" \
"GDB_DEBUG=$(GDB_DEBUG)" \
"GDBSERVER_DEBUG=$(GDBSERVER_DEBUG)" \
# All source files that go into linking GDB.
# Files that should wind up in SFILES and whose corresponding .o
# should be in COMMON_OBS.
COMMON_SFILES = \
ada-lang.c \
ada-tasks.c \
ada-typeprint.c \
ada-valprint.c \
ada-varobj.c \
addrmap.c \
agent.c \
alloc.c \
annotate.c \
arch-utils.c \
async-event.c \
auto-load.c \
auxv.c \
ax-gdb.c \
ax-general.c \
bcache.c \
bfd-target.c \
block.c \
blockframe.c \
break-catch-exec.c \
break-catch-fork.c \
break-catch-load.c \
break-catch-sig.c \
break-catch-syscall.c \
break-catch-throw.c \
break-cond-parse.c \
breakpoint.c \
bt-utils.c \
btrace.c \
build-id.c \
buildsym-legacy.c \
buildsym.c \
c-lang.c \
c-typeprint.c \
c-valprint.c \
c-varobj.c \
charset.c \
cli-out.c \
complaints.c \
completer.c \
copying.c \
corefile.c \
corelow.c \
cp-abi.c \
cp-namespace.c \
cp-support.c \
cp-valprint.c \
ctfread.c \
d-lang.c \
d-namespace.c \
d-valprint.c \
dcache.c \
debug.c \
debuginfod-support.c \
dictionary.c \
disasm.c \
displaced-stepping.c \
dummy-frame.c \
extract-store-integer.c \
eval.c \
event-top.c \
exceptions.c \
exec.c \
expprint.c \
extension.c \
f-lang.c \
f-typeprint.c \
f-valprint.c \
filesystem.c \
findcmd.c \
findvar.c \
frame.c \
frame-base.c \
frame-unwind.c \
gcore.c \
gdb-demangle.c \
gdb_bfd.c \
gdbtypes.c \
gmp-utils.c \
gnu-v2-abi.c \
gnu-v3-abi.c \
go-lang.c \
go-typeprint.c \
go-valprint.c \
inf-child.c \
inf-loop.c \
infcall.c \
infcmd.c \
inferior.c \
inflow.c \
infrun.c \
inline-frame.c \
interps.c \
jit.c \
language.c \
linespec.c \
location.c \
m2-lang.c \
m2-typeprint.c \
m2-valprint.c \
macrocmd.c \
macroexp.c \
macroscope.c \
macrotab.c \
main.c \
maint.c \
maint-test-options.c \
maint-test-settings.c \
mem-break.c \
memattr.c \
memory-map.c \
memrange.c \
memtag.c \
minidebug.c \
minsyms.c \
namespace.c \
objc-lang.c \
objfiles.c \
observable.c \
opencl-lang.c \
osabi.c \
osdata.c \
p-lang.c \
p-typeprint.c \
p-valprint.c \
parse.c \
printcmd.c \
probe.c \
process-stratum-target.c \
producer.c \
progspace.c \
progspace-and-thread.c \
prologue-value.c \
psymtab.c \
record.c \
record-btrace.c \
record-full.c \
regcache.c \
regcache-dump.c \
reggroups.c \
remote.c \
remote-fileio.c \
remote-notif.c \
reverse.c \
run-on-main-thread.c \
rust-lang.c \
rust-parse.c \
sentinel-frame.c \
ser-event.c \
serial.c \
skip.c \
solib.c \
solib-target.c \
source.c \
source-cache.c \
split-name.c \
stabsread.c \
stack.c \
std-regs.c \
symfile.c \
symfile-debug.c \
symmisc.c \
symtab.c \
target.c \
target-connection.c \
target-dcache.c \
target-descriptions.c \
target-memory.c \
test-target.c \
thread.c \
thread-iter.c \
tid-parse.c \
top.c \
tracectf.c \
tracefile.c \
tracefile-tfile.c \
tracepoint.c \
trad-frame.c \
tramp-frame.c \
target-float.c \
type-stack.c \
typeprint.c \
ui.c \
ui-file.c \
ui-out.c \
ui-style.c \
user-regs.c \
utils.c \
valarith.c \
valops.c \
valprint.c \
value.c \
varobj.c \
xml-support.c \
xml-syscall.c \
xml-tdesc.c
# Links made at configuration time should not be specified here, since
# SFILES is used in building the distribution archive.
SFILES = \
ada-exp.y \
arch/i386.c \
c-exp.y \
cp-name-parser.y \
d-exp.y \
dtrace-probe.c \
elf-none-tdep.c \
f-exp.y \
gcore-elf.c \
gdb.c \
go-exp.y \
m2-exp.y \
p-exp.y \
proc-service.list \
ser-base.c \
ser-unix.c \
sol-thread.c \
stap-probe.c \
stub-termcap.c \
symfile-mem.c \
ui-file.h \
$(SUBDIR_CLI_SRCS) \
$(SUBDIR_MI_SRCS) \
$(SUBDIR_TARGET_SRCS) \
$(COMMON_SFILES) \
$(SUBDIR_GCC_COMPILE_SRCS)
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
# so that each .h file is listed exactly once (M-x tags-search works
# wrong if TAGS has files twice). Because this is tricky to get
# right, it is probably easiest just to list .h files here directly.
HFILES_NO_SRCDIR = \
aarch32-tdep.h \
aarch64-ravenscar-thread.h \
aarch64-tdep.h \
ada-lang.h \
addrmap.h \
alpha-bsd-tdep.h \
alpha-tdep.h \
amd-dbgapi-target.h \
amd64-darwin-tdep.h \
amd64-linux-tdep.h \
amd64-nat.h \
amd64-ravenscar-thread.h \
amd64-tdep.h \
amdgpu-tdep.h \
annotate.h \
arc-tdep.h \
arch-utils.h \
arm-linux-tdep.h \
arm-netbsd-tdep.h \
arm-tdep.h \
async-event.h \
auto-load.h \
auxv.h \
ax.h \
ax-gdb.h \
bcache.h \
bfd-target.h \
bfin-tdep.h \
block.h \
break-cond-parse.h \
breakpoint.h \
bsd-kvm.h \
bsd-uthread.h \
bt-utils.h \
build-id.h \
buildsym-legacy.h \
buildsym.h \
c-lang.h \
charset.h \
charset-list.h \
cli-out.h \
coff-pe-read.h \
command.h \
complaints.h \
completer.h \
cp-abi.h \
cp-support.h \
csky-tdep.h \
d-lang.h \
darwin-nat.h \
dcache.h \
defs.h \
dicos-tdep.h \
dictionary.h \
disasm-flags.h \
disasm.h \
dummy-frame.h \
dwarf2/aranges.h \
dwarf2/cooked-index.h \
dwarf2/cooked-index-entry.h \
dwarf2/cooked-index-shard.h \
dwarf2/cooked-index-worker.h \
dwarf2/cooked-indexer.h \
dwarf2/cu.h \
dwarf2/frame-tailcall.h \
dwarf2/frame.h \
dwarf2/expr.h \
dwarf2/index-cache.h \
dwarf2/index-common.h \
dwarf2/loc.h \
dwarf2/read.h \
dwarf2/read-debug-names.h \
dwarf2/read-gdb-index.h \
event-top.h \
exceptions.h \
exec.h \
expression.h \
extension.h \
extension-priv.h \
extract-store-integer.h \
f-array-walker.h \
f-lang.h \
fbsd-nat.h \
fbsd-tdep.h \
filesystem.h \
frame.h \
frame-base.h \
frame-unwind.h \
frv-tdep.h \
ft32-tdep.h \
gcore-elf.h \
gcore.h \
gdb_bfd.h \
gdb_curses.h \
gdb_expat.h \
gdb_proc_service.h \
gdb-stabs.h \
gdb_vfork.h \
gdb_wchar.h \
gdbarch.h \
gdbcore.h \
gdbthread.h \
gdbtypes.h \
glibc-tdep.h \
gmp-utils.h \
gnu-nat.h \
go-lang.h \
gregset.h \
hppa-bsd-tdep.h \
hppa-linux-offsets.h \
hppa-tdep.h \
i386-bsd-nat.h \
i386-darwin-tdep.h \
i386-linux-tdep.h \
i386-tdep.h \
i387-tdep.h \
ia64-libunwind-tdep.h \
ia64-tdep.h \
inf-child.h \
inf-loop.h \
inf-ptrace.h \
infcall.h \
inferior.h \
inline-frame.h \
interps.h \
jit.h \
language.h \
linespec.h \
linux-fork.h \
linux-nat.h \
linux-record.h \
linux-tdep.h \
location.h \
loongarch-tdep.h \
m2-lang.h \
m32r-tdep.h \
m68k-tdep.h \
macroexp.h \
macroscope.h \
macrotab.h \
main.h \
mdebugread.h \
memattr.h \
memory-map.h \
memrange.h \
microblaze-tdep.h \
mips-linux-tdep.h \
mips-netbsd-tdep.h \
mips-tdep.h \
mn10300-tdep.h \
moxie-tdep.h \
netbsd-nat.h \
netbsd-tdep.h \
nds32-tdep.h \
elf-none-tdep.h \
objc-lang.h \
objfiles.h \
obsd-nat.h \
obsd-tdep.h \
or1k-linux-tdep.h \
osabi.h \
osdata.h \
p-lang.h \
parser-defs.h \
ppc-fbsd-tdep.h \
ppc-linux-tdep.h \
ppc-netbsd-tdep.h \
ppc-obsd-tdep.h \
ppc-ravenscar-thread.h \
ppc-tdep.h \
ppc64-tdep.h \
probe.h \
proc-utils.h \
procfs.h \
progspace.h \
progspace-and-thread.h \
prologue-value.h \
psymtab.h \
ravenscar-thread.h \
record.h \
record-full.h \
regcache.h \
reggroups.h \
regset.h \
remote.h \
remote-fileio.h \
remote-notif.h \
riscv-fbsd-tdep.h \
riscv-ravenscar-thread.h \
riscv-tdep.h \
rs6000-aix-tdep.h \
run-on-main-thread.h \
s390-linux-tdep.h \
s390-tdep.h \
selftest-arch.h \
sentinel-frame.h \
ser-base.h \
ser-event.h \
ser-tcp.h \
ser-unix.h \
serial.h \
sh-tdep.h \
sim-regno.h \
skip.h \
sol2-tdep.h \
solib.h \
solib-aix.h \
solib-darwin.h \
solib-frv.h \
solib-svr4.h \
solib-svr4-linux.h \
solib-target.h \
source.h \
source-cache.h \
sparc-nat.h \
sparc-ravenscar-thread.h \
sparc-tdep.h \
sparc64-tdep.h \
split-name.h \
stabsread.h \
stack.h \
stap-probe.h \
svr4-tls-tdep.h \
symfile.h \
symtab.h \
target.h \
target-dcache.h \
target-descriptions.h \
terminal.h \
tid-parse.h \
top.h \
tracectf.h \
tracefile.h \
tracepoint.h \
trad-frame.h \
target-float.h \
tramp-frame.h \
type-stack.h \
typeprint.h \
ui.h \
ui-file.h \
ui-out.h \
ui-style.h \
user-regs.h \
utils.h \
valprint.h \
value.h \
varobj.h \
varobj-iter.h \
vax-tdep.h \
windows-nat.h \
windows-tdep.h \
x86-bsd-nat.h \
x86-linux-nat.h \
x86-nat.h \
xcoffread.h \
xml-builtin.h \
xml-support.h \
xml-syscall.h \
xml-tdesc.h \
xtensa-tdep.h \
arch/aarch32.h \
arch/aarch64.h \
arch/aarch64-insn.h \
arch/aarch64-mte.h \
arch/aarch64-mte-linux.h \
arch/aarch64-scalable-linux.h \
arch/amd64-linux-tdesc.h \
arch/arc.h \
arch/arm.h \
arch/i386-linux-tdesc.h \
arch/i386.h \
arch/loongarch.h \
arch/ppc-linux-common.h \
arch/ppc-linux-tdesc.h \
arch/riscv.h \
arch/x86-linux-tdesc-features.h \
arch/x86-linux-tdesc.h \
cli/cli-cmds.h \
cli/cli-decode.h \
cli/cli-script.h \
cli/cli-setshow.h \
cli/cli-style.h \
cli/cli-utils.h \
compile/compile.h \
compile/compile-c.h \
compile/compile-cplus.h \
compile/compile-internal.h \
compile/compile-object-load.h \
compile/compile-object-run.h \
compile/gcc-c-plugin.h \
compile/gcc-cp-plugin.h \
config/nm-linux.h \
config/djgpp/langinfo.h \
config/djgpp/nl_types.h \
config/i386/nm-i386gnu.h \
config/sparc/nm-sol2.h \
mi/mi-cmds.h \
mi/mi-common.h \
mi/mi-console.h \
mi/mi-getopt.h \
mi/mi-main.h \
mi/mi-out.h \
mi/mi-parse.h \
nat/aarch64-linux.h \
nat/aarch64-linux-hw-point.h \
nat/aarch64-mte-linux-ptrace.h \
nat/aarch64-scalable-linux-ptrace.h \
nat/aarch64-scalable-linux-sigcontext.h \
nat/amd64-linux-siginfo.h \
nat/gdb_ptrace.h \
nat/gdb_thread_db.h \
nat/fork-inferior.h \
nat/i386-linux.h \
nat/linux-btrace.h \
nat/linux-namespaces.h \
nat/linux-nat.h \
nat/linux-osdata.h \
nat/linux-personality.h \
nat/linux-ptrace.h \
nat/linux-waitpid.h \
nat/loongarch-hw-point.h \
nat/loongarch-linux.h \
nat/loongarch-linux-hw-point.h \
nat/mips-linux-watch.h \
nat/ppc-linux.h \
nat/x86-cpuid.h \
nat/x86-dregs.h \
nat/x86-gcc-cpuid.h \
nat/x86-linux.h \
nat/x86-linux-dregs.h \
nat/x86-linux-tdesc.h \
python/py-event.h \
python/py-events.h \
python/py-stopevent.h \
python/python.h \
python/python-internal.h \
regformats/regdef.h \
target/resume.h \
target/target.h \
target/wait.h \
target/waitstatus.h \
tui/tui.h \
tui/tui-command.h \
tui/tui-data.h \
tui/tui-disasm.h \
tui/tui-file.h \
tui/tui-hooks.h \
tui/tui-io.h \
tui/tui-layout.h \
tui/tui-location.h \
tui/tui-regs.h \
tui/tui-source.h \
tui/tui-status.h \
tui/tui-win.h \
tui/tui-wingeneral.h \
tui/tui-winsource.h \
x86-tdep.h
# Header files that already have srcdir in them, or which are in objdir.
HFILES_WITH_SRCDIR = \
../bfd/bfd.h \
jit-reader.h
# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
# default their values the way we do for SER_HARDWIRE; in the future
# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
# variables analogous to SER_HARDWIRE which get defaulted in this
# Makefile.in
DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) $(SIM_OBS)
ALLDEPFILES = \
arch/aarch32.c \
arch/aarch64.c \
arch/aarch64-insn.c \
arch/aarch64-mte.c \
arch/aarch64-mte-linux.c \
arch/aarch64-scalable-linux.c \
arch/amd64.c \
arch/arc.c \
arch/arm.c \
arch/arm-get-next-pcs.c \
arch/arm-linux.c \
arch/i386.c \
arch/loongarch.c \
arch/ppc-linux-common.c \
arch/riscv.c \
arch/tic6x.c \
aarch32-tdep.c \
aarch64-fbsd-nat.c \
aarch64-fbsd-tdep.c \
aarch64-linux-nat.c \
aarch64-linux-tdep.c \
aarch64-newlib-tdep.c \
aarch64-ravenscar-thread.c \
aarch64-tdep.c \
aix-thread.c \
alpha-bsd-nat.c \
alpha-bsd-tdep.c \
alpha-linux-nat.c \
alpha-linux-tdep.c \
alpha-mdebug-tdep.c \
alpha-netbsd-tdep.c \
alpha-obsd-tdep.c \
alpha-tdep.c \
amd-dbgapi-target.c \
amd64-bsd-nat.c \
amd64-darwin-tdep.c \
amd64-dicos-tdep.c \
amd64-fbsd-nat.c \
amd64-fbsd-tdep.c \
amd64-gnu-tdep.c \
amd64-linux-nat.c \
amd64-linux-tdep.c \
amd64-nat.c \
amd64-netbsd-nat.c \
amd64-netbsd-tdep.c \
amd64-obsd-nat.c \
amd64-obsd-tdep.c \
amd64-ravenscar-thread.c \
amd64-sol2-tdep.c \
amd64-tdep.c \
amdgpu-tdep.c \
arc-linux-nat.c \
arc-tdep.c \
arm-bsd-tdep.c \
arm-fbsd-nat.c \
arm-fbsd-tdep.c \
arm-linux-nat.c \
arm-linux-tdep.c \
arm-netbsd-nat.c \
arm-netbsd-tdep.c \
arm-none-tdep.c \
arm-obsd-tdep.c \
arm-tdep.c \
avr-tdep.c \
bfin-linux-tdep.c \
bfin-tdep.c \
bpf-tdep.c \
bsd-kvm.c \
bsd-uthread.c \
csky-linux-tdep.c \
csky-tdep.c \
darwin-nat.c \
dicos-tdep.c \
fbsd-nat.c \
fbsd-tdep.c \
fork-child.c \
ft32-tdep.c \
glibc-tdep.c \
go32-nat.c \
h8300-tdep.c \
hppa-bsd-tdep.c \
hppa-linux-nat.c \
hppa-linux-tdep.c \
hppa-netbsd-nat.c \
hppa-netbsd-tdep.c \
hppa-obsd-nat.c \
hppa-obsd-tdep.c \
hppa-tdep.c \
i386-bsd-nat.c \
i386-bsd-tdep.c \
i386-darwin-nat.c \
i386-darwin-tdep.c \
i386-dicos-tdep.c \
i386-fbsd-nat.c \
i386-fbsd-tdep.c \
i386-gnu-tdep.c \
i386-linux-nat.c \
i386-linux-tdep.c \
i386-netbsd-nat.c \
i386-netbsd-tdep.c \
i386-obsd-nat.c \
i386-obsd-tdep.c \
i386-sol2-nat.c \
i386-sol2-tdep.c \
i386-tdep.c \
i386-windows-tdep.c \
i387-tdep.c \
ia64-libunwind-tdep.c \
ia64-linux-nat.c \
ia64-linux-tdep.c \
ia64-tdep.c \
ia64-vms-tdep.c \
inf-ptrace.c \
linux-fork.c \
linux-record.c \
linux-tdep.c \
lm32-tdep.c \
loongarch-linux-nat.c \
loongarch-linux-tdep.c \
loongarch-tdep.c \
m32r-linux-nat.c \
m32r-linux-tdep.c \
m32r-tdep.c \
m68hc11-tdep.c \
m68k-bsd-nat.c \
m68k-bsd-tdep.c \
m68k-linux-nat.c \
m68k-linux-tdep.c \
m68k-tdep.c \
microblaze-linux-tdep.c \
microblaze-tdep.c \
mingw-hdep.c \
mips-fbsd-nat.c \
mips-fbsd-tdep.c \
mips-linux-nat.c \
mips-linux-tdep.c \
mips-netbsd-nat.c \
mips-netbsd-tdep.c \
mips-sde-tdep.c \
mips-tdep.c \
mips64-obsd-nat.c \
mips64-obsd-tdep.c \
msp430-tdep.c \
netbsd-nat.c \
netbsd-tdep.c \
nds32-tdep.c \
obsd-nat.c \
obsd-tdep.c \
or1k-linux-nat.c \
posix-hdep.c \
ppc-fbsd-nat.c \
ppc-fbsd-tdep.c \
ppc-linux-nat.c \
ppc-linux-tdep.c \
ppc-netbsd-nat.c \
ppc-netbsd-tdep.c \
ppc-obsd-nat.c \
ppc-obsd-tdep.c \
ppc-ravenscar-thread.c \
ppc-sysv-tdep.c \
ppc64-tdep.c \
procfs.c \
ravenscar-thread.c \
remote-sim.c \
riscv-fbsd-nat.c \
riscv-fbsd-tdep.c \
riscv-linux-nat.c \
riscv-linux-tdep.c \
riscv-none-tdep.c \
riscv-ravenscar-thread.c \
riscv-tdep.c \
rl78-tdep.c \
rs6000-aix-nat.c \
rs6000-lynx178-tdep.c \
rs6000-tdep.c \
rx-tdep.c \
s390-linux-nat.c \
s390-linux-tdep.c \
s390-tdep.c \
ser-go32.c \
ser-mingw.c \
ser-pipe.c \
ser-tcp.c \
ser-uds.c \
sh-netbsd-nat.c \
sh-netbsd-tdep.c \
sh-tdep.c \
sol2-tdep.c \
solib-aix.c \
solib-rocm.c \
solib-svr4.c \
sparc-linux-nat.c \
sparc-linux-tdep.c \
sparc-nat.c \
sparc-netbsd-nat.c \
sparc-netbsd-tdep.c \
sparc-obsd-tdep.c \
sparc-ravenscar-thread.c \
sparc-sol2-nat.c \
sparc-sol2-tdep.c \
sparc-tdep.c \
sparc64-fbsd-nat.c \
sparc64-fbsd-tdep.c \
sparc64-linux-nat.c \
sparc64-linux-tdep.c \
sparc64-nat.c \
sparc64-netbsd-nat.c \
sparc64-netbsd-tdep.c \
sparc64-obsd-nat.c \
sparc64-obsd-tdep.c \
sparc64-sol2-tdep.c \
sparc64-tdep.c \
svr4-tls-tdep.c \
tilegx-linux-nat.c \
tilegx-linux-tdep.c \
tilegx-tdep.c \
v850-tdep.c \
vax-bsd-nat.c \
vax-netbsd-tdep.c \
vax-tdep.c \
windows-nat.c \
windows-tdep.c \
x86-gnu-nat.c \
x86-nat.c \
x86-tdep.c \
xstormy16-tdep.c \
xtensa-config.c \
xtensa-linux-nat.c \
xtensa-linux-tdep.c \
xtensa-tdep.c \
xtensa-xtregs.c
# Don't include YYFILES (*.c) because we already include *.y in SFILES,
# and it's more useful to see it in the .y file.
TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
$(CONFIG_SRCS)
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
# Files that are used to support certain debuginfo formats
DWARF2_SRCS = \
dwarf2/abbrev.c \
dwarf2/abbrev-table-cache.c \
dwarf2/ada-imported.c \
dwarf2/aranges.c \
dwarf2/attribute.c \
dwarf2/cooked-index.c \
dwarf2/cooked-index-entry.c \
dwarf2/cooked-index-shard.c \
dwarf2/cooked-index-worker.c \
dwarf2/cooked-indexer.c \
dwarf2/cu.c \
dwarf2/die.c \
dwarf2/dwz.c \
dwarf2/expr.c \
dwarf2/frame-tailcall.c \
dwarf2/frame.c \
dwarf2/index-cache.c \
dwarf2/index-common.c \
dwarf2/index-write.c \
dwarf2/leb.c \
dwarf2/line-header.c \
dwarf2/loc.c \
dwarf2/macro.c \
dwarf2/parent-map.c \
dwarf2/read.c \
dwarf2/read-debug-names.c \
dwarf2/read-gdb-index.c \
dwarf2/section.c \
dwarf2/stringify.c \
dwarf2/unit-head.c
DWARF2_OBS = $(patsubst %.c,%.o, $(DWARF2_SRCS))
COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
mi/mi-common.o \
version.o \
xml-builtin.o \
$(patsubst %.c,%.o,$(COMMON_SFILES)) \
$(SUBDIR_CLI_OBS) \
$(SUBDIR_MI_OBS) \
$(SUBDIR_TARGET_OBS) \
$(FORMAT_OBS)
SUBDIRS = doc @subdirs@ data-directory
CLEANDIRS = $(SUBDIRS)
# List of subdirectories in the build tree that must exist.
# This is used to force build failures in existing trees when
# a new directory is added.
# The format here is for the `case' shell command.
REQUIRED_SUBDIRS = doc | testsuite | data-directory
# Parser intermediate files.
YYFILES = \
ada-exp.c \
ada-lex.c \
c-exp.c \
cp-name-parser.c \
d-exp.c \
f-exp.c \
go-exp.c \
m2-exp.c \
p-exp.c
# ada-lex.c is included by another file, so it shouldn't wind up as a
# .o itself.
YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
# Things which need to be built when making a distribution.
DISTSTUFF = $(YYFILES)
# All generated files which can be included by another file.
generated_files = \
ada-lex.c \
config.h \
jit-reader.h \
$(NAT_GENERATED_FILES) \
$(NM_H)
# Flags needed to compile Python code
PYTHON_CFLAGS = @PYTHON_CFLAGS@
all: gdb$(EXEEXT) $(CONFIG_ALL) gdb-gdb.py gdb-gdb.gdb gcore gstack gdb-add-index
@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=$(SUBDIRS)" subdir_do
# Rule for compiling .c files in the top-level gdb directory.
# The order-only dependencies ensure that we create the build subdirectories.
%.o: %.c | $(CONFIG_DEP_SUBDIR)
$(COMPILE) $<
$(POSTCOMPILE)
$(CONFIG_DEP_SUBDIR):
$(ECHO_GEN) $(SHELL) $(srcdir)/../install-sh -d $@
# Python files need special flags.
python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
# Rules for compiling .c files in the various source subdirectories.
%.o: $(srcdir)/gdbtk/generic/%.c
$(COMPILE) $(all_gdbtk_cflags) $<
$(POSTCOMPILE)
installcheck:
# The check target can not use subdir_do, because subdir_do does not
# use TARGET_FLAGS_TO_PASS.
check: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
else true; fi
check-perf: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
else true; fi
check-read1 check-readmore: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) $@; \
else true; fi
check-parallel: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
else true; fi
check-all-boards: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-all-boards; \
else true; fi
testsuite.lockdir: force
rm -rf $@
mkdir -p $@
# The idea is to parallelize testing of multilibs, for example:
# make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
# will run 3 concurrent sessions of check, eventually testing all 10
# combinations. GNU make is required for the % pattern to work, as is
# a shell that expands alternations within braces. If GNU make is not
# used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
# prevent serialized checking due to the passed RUNTESTFLAGS.
# FIXME: use config.status --config not --version, when available.
check//%: force testsuite.lockdir
@if [ -f testsuite/config.status ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
target=`echo "$@" | sed 's,//.*,,'`; \
variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
vardots=`echo "$$variant" | sed 's,/,.,g'`; \
testdir=testsuite.$$vardots; \
if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
configargs=`cd testsuite && ./config.status --version | \
sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
$(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
(cd $$testdir && \
eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
"\"--srcdir=\$$rootsrc/testsuite\"" \
); \
else :; fi && cd $$testdir && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) \
RUNTESTFLAGS="GDB_LOCK_DIR=$$rootme/testsuite.lockdir --target_board=$$variant $(RUNTESTFLAGS)" \
FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
"$$target"; \
else true; fi
# The set of headers checked by 'check-headers' by default.
CHECK_HEADERS = $(HFILES_NO_SRCDIR)
# Try to compile each header in isolation, thus ensuring headers are
# self-contained.
#
# Defaults to checking all $HFILES_NO_SRCDIR headers.
#
# Do:
#
# make check-headers CHECK_HEADERS="header.h list.h"
#
# to check specific headers.
#
check-headers:
@echo Checking headers.
for i in $(CHECK_HEADERS) ; do \
$(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
$(INTERNAL_CFLAGS) $(CXXFLAGS) $(srcdir)/$$i ; \
done
.PHONY: check-headers
info install-info clean-info dvi install-dvi pdf install-pdf html install-html: force
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
# Traditionally "install" depends on "all". But it may be useful
# not to; for example, if the user has made some trivial change to a
# source file and doesn't care about rebuilding or just wants to save the
# time it takes for make to check that all is up to date.
# install-only is intended to address that need.
install: all
@$(MAKE) $(FLAGS_TO_PASS) install-only
install-only: $(CONFIG_INSTALL)
transformed_name=`t='$(program_transform_name)'; \
echo gdb | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) \
gdb$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
$(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
then \
transformed_name=`t='$(program_transform_name)'; \
echo gcore | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gcore ; \
else \
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
$(INSTALL_SCRIPT) gcore \
$(DESTDIR)$(bindir)/$$transformed_name; \
fi
if test "x${HAVE_GSTACK}" != x; \
then \
transformed_name=`t='$(program_transform_name)'; \
echo gstack | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gstack ; \
else \
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
$(INSTALL_SCRIPT) gstack \
$(DESTDIR)$(bindir)/$$transformed_name; \
fi
transformed_name=`t='$(program_transform_name)'; \
echo gdb-add-index | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb-add-index ; \
else \
true ; \
fi ; \
$(INSTALL_SCRIPT) gdb-add-index \
$(DESTDIR)$(bindir)/$$transformed_name
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
install-strip:
$(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
install-guile:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
install-python:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
uninstall: force $(CONFIG_UNINSTALL)
transformed_name=`t='$(program_transform_name)'; \
echo gdb | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT)
rm -f $(DESTDIR)$(includedir)/gdb/jit-reader.h
if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
then \
transformed_name=`t='$(program_transform_name)'; \
echo gcore | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gcore ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
fi
if test "x$(HAVE_GSTACK)" != x; \
then \
transformed_name=`t='$(program_transform_name)'; \
echo gstack | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gstack ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
fi
transformed_name=`t='$(program_transform_name)'; \
echo gdb-add-index | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb-add-index ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name
@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
# We do this by grepping through sources. If that turns out to be too slow,
# maybe we could just require every .o file to have an initialization routine
# of a given name (top.o -> _initialize_top, etc.).
#
# Note that the set of files with init functions might change, or the names
# of the functions might change, so this files needs to depend on all the
# source files that will be linked into gdb. However, due to the way
# this Makefile has generally been written, we do this indirectly, by
# computing the list of source files from the list of object files.
INIT_FILES_FILTER_OUT = \
init.o \
version.o \
xml-builtin.o \
%_S.o \
%_U.o
INIT_FILES = \
$(patsubst %.o,%.c, \
$(patsubst %-exp.o,%-exp.y, \
$(filter-out $(INIT_FILES_FILTER_OUT), $(COMMON_OBS))))
init.c: stamp-init; @true
stamp-init: $(INIT_FILES) config.status $(srcdir)/make-init-c
$(ECHO_INIT_C)
$(SILENCE) $(srcdir)/make-init-c \
$(filter-out config.status $(srcdir)/make-init-c,$^) \
> init.c-tmp
$(SILENCE) $(SHELL) $(srcdir)/../move-if-change init.c-tmp init.c
$(SILENCE) echo stamp > stamp-init
.PRECIOUS: init.c
# Create a library of the gdb object files and build GDB by linking
# against that.
#
# init.o is very important. It pulls in the rest of GDB.
LIBGDB_OBS = $(sort $(COMMON_OBS)) init.o
libgdb.a: $(LIBGDB_OBS)
-rm -f libgdb.a
$(AR) q libgdb.a $(LIBGDB_OBS)
$(RANLIB) libgdb.a
# Removing the old gdb first works better if it is running, at least on SunOS.
gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(CDEPS) $(TDEPLIBS)
$(SILENCE) rm -f gdb$(EXEEXT)
$(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
$(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
ifneq ($(CODESIGN_CERT),)
$(ECHO_SIGN) $(CODESIGN) -s $(CODESIGN_CERT) gdb$(EXEEXT)
endif
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
# Removing gdb1 before the copy is the right thing if gdb1 is open
# in another process.
gdb1$(EXEEXT): gdb$(EXEEXT)
rm -f gdb1$(EXEEXT)
cp gdb$(EXEEXT) gdb1$(EXEEXT)
# Put the proper machine-specific files first, so M-. on a machine
# specific routine gets the one for the correct machine. (FIXME: those
# files go in twice; we should be removing them from the main list).
# TAGS depends on all the files that go into it so you can rebuild TAGS
# with `make TAGS' and not have to say `rm TAGS' first.
GDB_NM_FILE = @GDB_NM_FILE@
TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
@echo Making TAGS
etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
`(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
echo $(srcdir)/$$i ; \
done ; for i in $(TAGFILES_WITH_SRCDIR); do \
echo $$i ; \
done) | sed -e 's/\.o$$/\.c/'` \
`find $(srcdir)/config -name '*.h' -print`
tags: TAGS
clean mostlyclean: $(CONFIG_CLEAN)
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
rm -f *.o *.a *~ init.c-tmp init.l-tmp version.c-tmp
rm -f init.c stamp-init version.c stamp-version
rm -f gdb$(EXEEXT) core make.log
rm -f gdb[0-9]$(EXEEXT)
rm -f xml-builtin.c stamp-xml
rm -f $(DEPDIR)/*
for i in $(CONFIG_SRC_SUBDIR); do \
rm -f $$i/*.o; \
rm -f $$i/$(DEPDIR)/*; \
done
# This used to depend on c-exp.c m2-exp.c TAGS
# I believe this is wrong; the makefile standards for distclean just
# describe removing files; the only sort of "re-create a distribution"
# functionality described is if the distributed files are unmodified.
distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
rm -f nm.h config.status config.h stamp-h b jit-reader.h gcore gstack gstack.in stamp-nmh
rm -f gdb-gdb.py gdb-gdb.gdb
rm -f y.output yacc.acts yacc.tmp y.tab.h
rm -f config.log config.cache
rm -f config.lt libtool
rm -f Makefile
rm -rf $(DEPDIR)
for i in $(CONFIG_SRC_SUBDIR); do \
if test -d $$i/$(DEPDIR); then rmdir $$i/$(DEPDIR); fi \
done
maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
realclean: maintainer-clean
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
rm -f c-exp.c \
cp-name-parser.c \
ada-lex.c ada-exp.c \
d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
rm -f TAGS
rm -f $(YYFILES)
rm -f nm.h config.status
do-maintainer-clean:
@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
subdir_do
diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
cd doc; $(MAKE) $(MFLAGS) diststuff
subdir_do: force
@for i in $(DODIRS); do \
case $$i in \
$(REQUIRED_SUBDIRS)) \
if [ ! -f ./$$i/Makefile ] ; then \
echo "Missing $$i/Makefile" >&2 ; \
exit 1 ; \
fi ;; \
esac ; \
if [ -f ./$$i/Makefile ] ; then \
if (cd ./$$i; \
$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
else exit 1 ; fi ; \
else true ; fi ; \
done
Makefile: Makefile.in config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) $@
.PHONY: run
run: Makefile
./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
jit-reader.h: $(srcdir)/jit-reader.in config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) $@
gstack.in gcore.in: %.in : $(srcdir)/%-1.in config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) $@
gdb-add-index.in : $(srcdir)/contrib/gdb-add-index.sh config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) $@
gstack gcore gdb-add-index: % : %.in version.c
$(ECHO_GEN) \
vv=`grep 'version\[\] = ' version.c | grep -o '".*"' | tr -d \"`; \
sed -e "s,@VERSION@,$$vv," $< > $@
@chmod +x $@
gdb-gdb.py: $(srcdir)/gdb-gdb.py.in config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) $@
gdb-gdb.gdb: $(srcdir)/gdb-gdb.gdb.in config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) $@
config.h: stamp-h ; @true
stamp-h: $(srcdir)/config.in config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) config.h
nm.h: stamp-nmh ; @true
stamp-nmh: config.status
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) nm.h
# Files included from config.status or the configure script. When
# these change the configure script doesn't need regenerating, but its
# output (and so that of config.status) might change.
config_status_deps = \
$(srcdir)/configure \
$(srcdir)/configure.nat \
$(srcdir)/configure.tgt \
$(srcdir)/configure.host \
$(srcdir)/../bfd/development.sh \
$(srcdir)/../bfd/config.bfd
config.status: $(config_status_deps)
$(ECHO_GEN) $(SHELL) config.status $(SILENT_FLAG) --recheck
ACLOCAL = aclocal
# Keep these in sync with the includes in acinclude.m4.
aclocal_m4_deps = \
configure.ac \
acx_configure_dir.m4 \
transform.m4 \
../bfd/bfd.m4 \
../config/acinclude.m4 \
../config/enable.m4 \
../config/plugins.m4 \
../config/lead-dot.m4 \
../config/override.m4 \
../config/largefile.m4 \
../config/gettext-sister.m4 \
../config/lib-ld.m4 \
../config/lib-prefix.m4 \
../config/lib-link.m4 \
../config/acx.m4 \
../config/tcl.m4 \
../config/depstand.m4 \
../config/lcmessage.m4 \
../config/codeset.m4 \
../config/zlib.m4 \
../config/zstd.m4 \
../config/ax_pthread.m4
$(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL)
AUTOCONF = autoconf
configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
cd $(srcdir) && $(AUTOCONF)
AUTOHEADER = autoheader
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
cd $(srcdir) && $(AUTOHEADER)
rm -f stamp-h
touch $@
# automatic rebuilding in automake-generated Makefiles requires
# this rule in the toplevel Makefile, which, with GNU make, causes
# the desired updates through the implicit regeneration of the Makefile
# and all of its prerequisites.
am--refresh:
@:
force:
# Documentation!
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
doc/refcard.dvi:
cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
doc/refcard.ps:
cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
# GDB MANUAL: TeX dvi file
doc/gdb.dvi:
cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
# GDB MANUAL: info file
doc/gdb.info:
cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
# Make copying.c from COPYING
$(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
awk -f $(srcdir)/copying.awk \
< $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
mv $(srcdir)/copying.tmp $(srcdir)/copying.c
version.c: stamp-version; @true
# Note that the obvious names for the temp file are taken by
# create-version.sh.
stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/../gdbsupport/create-version.sh
$(ECHO_GEN) $(SHELL) $(srcdir)/../gdbsupport/create-version.sh $(srcdir) \
$(host_alias) $(target_alias) version-t.t
@$(SHELL) $(srcdir)/../move-if-change version-t.t version.c
@echo stamp > stamp-version
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
force_update:
# GNU Make has an annoying habit of putting *all* the Makefile variables
# into the environment, unless you include this target as a circumvention.
# Rumor is that this will be fixed (and this target can be removed)
# in GNU Make 4.0.
.NOEXPORT:
# GNU Make 3.63 has a different problem: it keeps tacking command line
# overrides onto the definition of $(MAKE). This variable setting
# will remove them.
MAKEOVERRIDES =
# Some files need explicit build rules (due to -Werror problems) or due
# to sub-directory fun 'n' games.
# ada-exp.c can appear in srcdir, for releases; or in ., for
# development builds.
ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
ada-exp.o: ada-exp.c
$(COMPILE) $(ADA_EXP_C)
$(POSTCOMPILE)
# Message files. Based on code in gcc/Makefile.in.
# Rules for generating translated message descriptions. Disabled by
# autoconf if the tools are not available.
.PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
all-po: $(CATALOGS)
# This notation should be acceptable to all Make implementations used
# by people who are interested in updating .po files.
update-po: $(CATALOGS:.gmo=.pox)
# N.B. We do not attempt to copy these into $(srcdir). The snapshot
# script does that.
%.gmo: %.po
-test -d po || mkdir po
$(GMSGFMT) --statistics -o $@ $<
# The new .po has to be gone over by hand, so we deposit it into
# build/po with a different extension. If build/po/$(PACKAGE).pot
# exists, use it (it was just created), else use the one in srcdir.
%.pox: %.po
-test -d po || mkdir po
$(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
then echo po/$(PACKAGE).pot; \
else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
# This rule has to look for .gmo modules in both srcdir and the cwd,
# and has to check that we actually have a catalog for each language,
# in case they weren't built or included with the distribution.
install-po:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
cats="$(CATALOGS)"; for cat in $$cats; do \
lang=`basename $$cat | sed 's/\.gmo$$//'`; \
if [ -f $$cat ]; then :; \
elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
else continue; \
fi; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
$(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
done
uninstall-po:
cats="$(CATALOGS)"; for cat in $$cats; do \
lang=`basename $$cat | sed 's/\.gmo$$//'`; \
if [ -f $$cat ]; then :; \
elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
else continue; \
fi; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
done
# Delete po/*.gmo only if we are not building in the source directory.
clean-po:
-if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
# Rule for regenerating the message template (gdb.pot). Instead of
# forcing everyone to edit POTFILES.in, which proved impractical, this
# rule has no dependencies and always regenerates gdb.pot. This is
# relatively harmless since the .po files do not directly depend on
# it. The .pot file is left in the build directory. Since GDB's
# Makefile lacks a canonical list of sources (missing xm, tm and nm
# files) force this rule.
$(PACKAGE).pot: po/$(PACKAGE).pot
po/$(PACKAGE).pot: force
-test -d po || mkdir po
sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
#
# YACC/LEX dependencies
#
# LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
# exist in srcdir, then compiled in objdir to LANG-exp.o. If we
# said LANG-exp.c rather than ./c-exp.c some makes would
# sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
# decls for malloc/realloc/free which conflict with everything else.
# Strictly speaking c-exp.c should therefore depend on
# Makefile.in, but that was a pretty big annoyance.
%.c: %.y
$(ECHO_YACC) $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- \
$(YACC) $(YFLAGS) || (rm -f $@.tmp; false)
@sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/\([^x]\)malloc/\1xmalloc/g' \
-e 's/\([^x]\)realloc/\1xrealloc/g' \
-e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-e '/^#line.*y.tab.c/d' \
-e 's/YY_NULL/YY_NULLPTR/g' \
-e "s/YYSTYPE/$(subst -,_,$*)_YYSTYPE/g" \
-e "s/yyalloc/$(subst -,_,$*)_yyalloc/g" \
-e "s/yysymbol_kind_t/$(subst -,_,$*)_yysymbol_kind_t/g" \
< $@.tmp > $@.new && \
rm -f $@.tmp && \
mv $@.new $@
%.c: %.l
$(ECHO_LEX) $(FLEX) -t $< > $@.tmp || (rm -f $@.tmp; false)
@sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/\([^x]\)malloc/\1xmalloc/g' \
-e 's/\([^x]\)realloc/\1xrealloc/g' \
-e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-e 's/yy_flex_xrealloc/yyxrealloc/g' \
< $@.tmp > $@.new && \
rm -f $@.tmp && \
mv $@.new $@
# XML rules
xml-builtin.c: stamp-xml; @true
stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
$(SILENCE) rm -f xml-builtin.tmp
$(ECHO_GEN_XML_BUILTIN) AWK="$(AWK)" \
$(SHELL) $(srcdir)/features/feature_to_c.sh \
xml-builtin.tmp $(XMLFILES)
$(SILENCE) $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
$(SILENCE) echo stamp > stamp-xml
.PRECIOUS: xml-builtin.c
#
# GDBTK sub-directory
#
all-gdbtk: insight$(EXEEXT)
install-gdbtk:
transformed_name=`t='$(program_transform_name)'; \
echo insight | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=insight ; \
else \
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) \
insight$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY) ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
$(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
$(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY)/images \
$(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY)/help \
$(DESTDIR)$(GDBTK_LIBRARY)/help/images \
$(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
cd $(srcdir)/gdbtk/library ; \
for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
do \
$(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
done ;
uninstall-gdbtk:
transformed_name=`t='$(program_transform_name)'; \
echo insight | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=insight ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
clean-gdbtk:
rm -f insight$(EXEEXT)
# Removing the old gdb first works better if it is running, at least on SunOS.
insight$(EXEEXT): gdbtk-main.o libgdb.a $(CDEPS) $(TDEPLIBS)
rm -f insight$(EXEEXT)
$(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-o insight$(EXEEXT) gdbtk-main.o libgdb.a \
$(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
$(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
$(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
$(GDBTK_CFLAGS) \
-DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
-DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
#
# Dependency tracking.
#
ifeq ($(DEPMODE),depmode=gcc3)
# Note that we put the dependencies into a .Tpo file, then move them
# into place if the compile succeeds. We need this because gcc does
# not atomically write the dependency output file.
override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
$(@D)/$(DEPDIR)/$(basename $(@F)).Po
else
override COMPILE.pre = source='$<' object='$@' libtool=no \
DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
$(CXX) -x c++ $(CXX_DIALECT)
# depcomp handles atomicity for us, so we don't need a postcompile
# step.
override POSTCOMPILE =
endif
# A list of all the objects we might care about in this build, for
# dependency tracking.
all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o
# All the .deps files to include.
all_deps_files = $(foreach dep,$(patsubst %.o,%.Po,$(all_object_files)),\
$(dir $(dep))/$(DEPDIR)/$(notdir $(dep)))
# Ensure that generated files are created early. Use order-only
# dependencies if available. They require GNU make 3.80 or newer,
# and the .VARIABLES variable was introduced at the same time.
ifdef .VARIABLES
$(all_object_files): | $(generated_files)
else
$(all_object_files) : $(generated_files)
endif
# Dependencies.
-include $(all_deps_files)
# Disable implicit make rules.
include $(srcdir)/disable-implicit-rules.mk
### end of the gdb Makefile.in.
View Git Blame Copy Permalink