Complement commit 7361da2c95 ("Add support for MIPS R6.") and fix
internal errors like:
foo.s: Assembler messages:
foo.s: Internal error!
Assertion failure in md_apply_fix at .../gas/config/tc-mips.c:15028.
Please report this bug.
triggered by resolved R6 PC-relative relocations in sources containing
R6 code fragments wrapped into ISA override blocks embedded within code
otherwise assembled for an older ISA.
gas/
* config/tc-mips.c (calculate_reloc) <BFD_RELOC_HI16_S_PCREL>
<BFD_RELOC_LO16_PCREL>: New switch cases.
(md_apply_fix) <BFD_RELOC_HI16_S_PCREL, BFD_RELOC_LO16_PCREL>:
Move switch cases along `BFD_RELOC_MIPS_JMP'.
<BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2>
<BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2>: Handle
the resolved case.
* testsuite/gas/mips/pcrel-reloc-4.d: New test.
* testsuite/gas/mips/pcrel-reloc-4-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-5.d: New test.
* testsuite/gas/mips/pcrel-reloc-5-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.l: New list test.
* testsuite/gas/mips/pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Avoid segmentation faults in alignment checks made in `md_apply_fix' for
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2 relocations
caused by dereferencing `fixP->fx_addsy' which will be null if the
relocation processed has been fully resolved.
gas/
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS_18_PCREL_S3>
<BFD_RELOC_MIPS_19_PCREL_S2>: Avoid null pointer dereferences
via `fixP->fx_addsy'.
The PC-relative R_MIPS_PC18_S3 relocation and consequently its BFD
internal BFD_RELOC_MIPS_18_PCREL_S3 representation is calculated from
the address of the aligned doubleword containing the location being
relocated: (sign_extend(A) + S - (P & ~0x7)) >> 3 rather than the
address of the location itself. Reflect this in calculations made by
GAS so that the relocated field is set correctly if resolved by GAS,
such as with local symbols in the same section which do not require
relocations to be propagated to the link stage.
gas/
* config/tc-mips.c (md_pcrel_from) <BFD_RELOC_MIPS_18_PCREL_S3>:
Calculate relocation from the containing aligned doubleword.
(tc_gen_reloc) <BFD_RELOC_MIPS_18_PCREL_S3>: Calculate the
addend from the containing aligned doubleword.
Use the module level ISA setting rather than the last ISA selected with
a `.set' directive in the source file in determination as to whether to
keep PC-relative relocations and then with the original symbol referred,
for the purpose of R6 linker relaxation.
This is so that with e.g. code like this:
b foo
.set mips32r2
...
it's the command line options or any `.module' directive that decides
how to encode any relocation for `foo' rather than the presence of `.set
mips32r2'.
gas/
* config/tc-mips.c (mips_force_relocation): Use `file_mips_opts'
rather than `mips_opts' for the R6 ISA check.
(mips_fix_adjustable): Likewise.
* testsuite/gas/mips/pcrel-reloc-1.d: New test.
* testsuite/gas/mips/pcrel-reloc-1-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-2.d: New test.
* testsuite/gas/mips/pcrel-reloc-2-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-3.d: New test.
* testsuite/gas/mips/pcrel-reloc-3-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Complement commit 44d3da2338 ("MIPS/GAS: Treat local jump relocs the
same no matter if REL or RELA") and update and clarify the comment on
jump reloc conversion.
gas/
* config/tc-mips.c (mips_fix_adjustable): Update comment on jump
reloc conversion.
Revert an inadvertent change to make RELA JALR relocations
section-relative on MIPS R6 targets made with commit 7361da2c95 ("Add
support for MIPS R6."). There is no need to make this a special case
and the comment introduced with the said change clearly indicates this
was not intended.
gas/
* config/tc-mips.c (mips_fix_adjustable): Don't convert RELA
JALR relocations on R6.
* testsuite/gas/mips/jal-svr4pic-local.d: New test.
* testsuite/gas/mips/mips1@jal-svr4pic-local.d: New test.
* testsuite/gas/mips/r3000@jal-svr4pic-local.d: New test.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: New test.
* testsuite/gas/mips/jal-svr4pic-local-n32.d: New test.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d: New
test.
* testsuite/gas/mips/jal-svr4pic-local-n64.d: New test.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d: New
test.
* testsuite/gas/mips/jal-svr4pic-local.s: New test source.
* testsuite/gas/mips/jal-svr4pic-local-newabi.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Do not convert jump relocs against local MIPS16 or microMIPS symbols to
refer to a section symbol instead even on RELA targets, as it makes it
impossible for the linker to make a JAL to JALX conversion based on ISA
symbol annotation, breaking regular and compressed MIPS interlinking.
gas/
* config/tc-mips.c (mips_fix_adjustable): Also return 0 for
jump relocations against MIPS16 or microMIPS symbols on RELA
targets.
* testsuite/gas/mips/jalx-local.d: New test.
* testsuite/gas/mips/jalx-local-n32.d: New test.
* testsuite/gas/mips/jalx-local-n64.d: New test.
* testsuite/gas/mips/jalx-local.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalx-local.d: New test.
* testsuite/ld-mips-elf/jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
With code refactoring made in commit b886a2ab0d and the addition of
`calculate_reloc' and a separate test for TLS relocs against constants
made there the preexisting fall-through from the TLS reloc switch case
has effectively become a dead execution path. This is because the call
to `calculate_reloc' present there is only made if `fixP->fx_done' is
true, which can only be the case if `fixP->fx_addsy' is NULL, which in
turn has already triggered the TLS reloc test and made execution break
out of the switch statement.
Remove the fall-through then and reshape code accordingly.
gas/
* config/tc-mips.c (md_apply_fix)
<BFD_RELOC_MIPS16_TLS_TPREL_LO16>: Remove fall-through, adjust
code accordingly.
The microMIPS JALX instruction shares the R_MICROMIPS_26_S1 relocation
with microMIPS J/JAL/JALS instructions, however unlike the latters its
encoded immediate argument is unusually shifted left by 2 rather than 1
in calculating the value used for the operation requested.
We already handle this exception in `mips_elf_calculate_relocation' in
LD, in a scenario where JALX is produced as a result of relaxing JAL for
the purpose of making a cross-mode jump. We also get it right in the
disassembler in `decode_micromips_operand'.
What we don't correctly do however is processing microMIPS JALX produced
by GAS from an assembly source, where a non-zero constant argument or a
symbol reference with a non-zero in-place addend has been used. In this
case the same calculation is made as for microMIPS J/JAL/JALS, causing
the wrong encoding to be produced by GAS on making an object file, and
then again by LD in the final link. The latter in particular causes the
calculation, where the addend fits in the relocatable field, to produce
different final addresses for the same source code depending on whether
REL or RELA relocations are used.
Correct these issues by special-casing microMIPS JALX in the places that
have been previously missed.
bfd/
* elfxx-mips.c (mips_elf_read_rel_addend): Adjust the addend for
microMIPS JALX.
gas/
* config/tc-mips.c (append_insn): Correct the encoding of a
constant argument for microMIPS JALX.
(tc_gen_reloc): Correct the encoding of an in-place addend for
microMIPS JALX.
* testsuite/gas/mips/jalx-addend.d: New test.
* testsuite/gas/mips/jalx-addend-n32.d: New test.
* testsuite/gas/mips/jalx-addend-n64.d: New test.
* testsuite/gas/mips/jalx-imm.d: New test.
* testsuite/gas/mips/jalx-imm-n32.d: New test.
* testsuite/gas/mips/jalx-imm-n64.d: New test.
* testsuite/gas/mips/jalx-addend.s: New test source.
* testsuite/gas/mips/jalx-imm.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalx-addend.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Correct a regression introduced with commit 919731affb ("Add MIPS
.module directive") causing code like:
.set mips3
dli $2, 0x9000000080000000
to fail assembly with the following error message produced:
Error: number (0x9000000080000000) larger than 32 bits
if built with `mips3' selected as the global ISA (e.g. `-march=mips3').
This is because a `.set' directive doing an ISA override does not lift
the ABI restriction on register sizes if the ISA remains unchanged.
Previously the directive always set register sizes from the ISA chosen,
which is what some code expects. Restore the old semantics then.
gas/
* config/tc-mips.c (code_option_type): New enum.
(parse_code_option): Return status indicating option type.
(s_mipsset): Update `parse_code_option' call site accordingly.
Always set register sizes from the ISA with ISA overrides.
(s_module): Update `parse_code_option' call site.
* testsuite/gas/mips/isa-override-1.d: New test.
* testsuite/gas/mips/micromips@isa-override-1.d: New test.
* testsuite/gas/mips/mips1@isa-override-1.d: New test.
* testsuite/gas/mips/mips2@isa-override-1.d: New test.
* testsuite/gas/mips/mips32@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r2@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r3@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r5@isa-override-1.d: New test.
* testsuite/gas/mips/mips32r6@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r2@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r3@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r5@isa-override-1.d: New test.
* testsuite/gas/mips/mips64r6@isa-override-1.d: New test.
* testsuite/gas/mips/r3000@isa-override-1.d: New test.
* testsuite/gas/mips/r3900@isa-override-1.d: New test.
* testsuite/gas/mips/r5900@isa-override-1.d: New test.
* testsuite/gas/mips/octeon@isa-override-1.d: New test.
* testsuite/gas/mips/octeon3@isa-override-1.d: New test.
* testsuite/gas/mips/isa-override-2.l: New list test.
* testsuite/gas/mips/mips1@isa-override-2.l: New list test.
* testsuite/gas/mips/mips2@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r2@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r3@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r5@isa-override-2.l: New list test.
* testsuite/gas/mips/mips32r6@isa-override-2.l: New list test.
* testsuite/gas/mips/r3000@isa-override-2.l: New list test.
* testsuite/gas/mips/r3900@isa-override-2.l: New list test.
* testsuite/gas/mips/octeon3@isa-override-2.l: New list test.
* testsuite/gas/mips/octeon3@isa-override-1.l: New stderr
output.
* testsuite/gas/mips/isa-override-1.s: New test source.
* testsuite/gas/mips/r5900@isa-override-1.s: New test source.
* testsuite/gas/mips/isa-override-2.s: New test source.
* testsuite/gas/mips/mips1@isa-override-2.s: New test source.
* testsuite/gas/mips/mips2@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r2@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r3@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r5@isa-override-2.s: New test source.
* testsuite/gas/mips/mips32r6@isa-override-2.s: New test source.
* testsuite/gas/mips/r3000@isa-override-2.s: New test source.
* testsuite/gas/mips/r3900@isa-override-2.s: New test source.
* testsuite/gas/mips/octeon3@isa-override-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Presumably this was supposed to be regname[sizeof (regname) - 1] but was typoed
to regname[sizeof (rename) - 1]. However that should be unnecessary because
sprintf should null terminate. As is this assignment is invalid ISO C because
rename refers to the function rename (), and sizeof on functions is undefined.
In GNU C C the size of functions is 1 so the expression is the same as
regname[0]. The following call to sprintf () clearly will over right that, so
the statement either has no effect or is invalid. Given that it seems safe to
just remove it. While we are there correct the size of regname, and switch
from snprintf to sprintf since we know the exact length of the result.
gas/ChangeLog:
2016-04-15 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-mips.c (md_begin): Remove useless assignment.
Weak symbols can be preempted at link time so always choose the longer
sequence in branch relaxation, according to the relaxation level chosen,
so that any symbol finally used as the branch target is reachable.
2016-04-13 Maciej W. Rozycki <macro@imgtec.com>
Andrew Bennett <andrew.bennett@imgtec.com>
gas/
* config/tc-mips.c (relaxed_branch_length): Use the long
sequence where the target is a weak symbol.
(relaxed_micromips_32bit_branch_length): Likewise.
(relaxed_micromips_16bit_branch_length): Likewise.
* testsuite/gas/mips/branch-weak-1.d: New test.
* testsuite/gas/mips/branch-weak-2.d: New test.
* testsuite/gas/mips/branch-weak-3.d: New test.
* testsuite/gas/mips/branch-weak-4.d: New test.
* testsuite/gas/mips/branch-weak-5.d: New test.
* testsuite/gas/mips/branch-weak.l: New stderr output.
* testsuite/gas/mips/branch-weak.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Where branch relaxation is enabled emit the long sequence for branches
whose distance cannot be determined, i.e. to symbols that are undefined
or in a different segment. These symbols are only resolved at link time
and therefore the longer sequence ensures the branch target is in range,
which cannot be guaranteed with a direct branch.
This is the opposite to the current implementation, originally proposed
here: <https://sourceware.org/ml/binutils/2002-09/msg00218.html>. The
proposal was then extensively discussed before the final version was
posted here: <https://sourceware.org/ml/binutils/2002-10/msg00191.html>
and eventually committed:
commit 4a6a3df43d
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Sat Oct 12 05:23:33 2002 +0000
The case considered here was not commented in the review however and the
original version remains. With branch relaxation enabled it makes more
sense to do it consistently, so that all code impure with respect to
branch distances can be linked. Direct branches are still produced for
the cases concerned where branch relaxation is disabled, which is the
default.
gas/
* config/tc-mips.c (relaxed_branch_length): Use the long
sequence where the distance cannot be determined.
(relaxed_micromips_32bit_branch_length): Likewise.
* testsuite/gas/mips/branch-extern-1.d: New test.
* testsuite/gas/mips/branch-extern-2.d: New test.
* testsuite/gas/mips/branch-extern-3.d: New test.
* testsuite/gas/mips/branch-extern-4.d: New test.
* testsuite/gas/mips/branch-extern.l: New stderr output.
* testsuite/gas/mips/branch-extern.s: New test source.
* testsuite/gas/mips/branch-section-1.d: New test.
* testsuite/gas/mips/branch-section-2.d: New test.
* testsuite/gas/mips/branch-section-3.d: New test.
* testsuite/gas/mips/branch-section-4.d: New test.
* testsuite/gas/mips/branch-section.l: New stderr output.
* testsuite/gas/mips/branch-section.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
gas/
* config/tc-mips.c (s_option): Sanitize `.option picX'
pseudo-op.
* testsuite/gas/mips/option-pic-1.d: New test.
* testsuite/gas/mips/option-pic-2.l: New list test.
* testsuite/gas/mips/option-pic-1.s: New test source.
* testsuite/gas/mips/option-pic-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
gas/
* config/tc-mips.c (s_option): Reject `.option picX' if VxWorks
PIC.
* testsuite/gas/mips/option-pic-vxworks-1.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-2.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-1.s: New test source.
* testsuite/gas/mips/option-pic-vxworks-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
gas/
* config/tc-mips.c (macro): State the recommended way of creating
32-bit or 64-bit addresses.
gas/testsuite/
* gas/mips/dla-warn.l: New file.
* gas/mips/dla-warn.s: New file.
* gas/mips/la-warn.l: New file.
* gas/mips/la-warn.s: New file.
* gas/mips/mips.exp: Run new tests.
gas/
* config/tc-mips.c (md_apply_fix): Apply alignment check
to the symbol and offset rather than *valP for
BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message
for BFD_RELOC_MIPS_19_PCREL_S2.
gas/testsuite/
* gas/mips/r6-64.s: Remove .align directives from LDPC
instructions and add further tests for LDPC.
* gas/mips/r6-64-n32.d: remove the NOPs from LDPC expected
output and update for new tests.
* gas/mips/r6-64-n64.d: Likewise.
* gas/mips/ldpc-unalign.l: New file.
* gas/mips/ldpc-unalign.s: Likewise.
* gas/mips/mips.exp: Run ldpc-unalign test.
bfd/
* elfxx-mips.c (update_mips_abiflags_isa): Add E_MIPS_ARCH_32R6
and E_MIPS_ARCH_64R6 support.
ld/testsuite/
* ld-mips-elf/abiflags-strip10-ph.d: New file.
* ld-mips-elf/mips-eld.exp: Run the new test.
gas/
* config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6
and INSN_ISA64R6 support.
gas/testsuite/
* gas/mips/elf_arch_mips32r6.d: New file.
* gas/mips/elf_arch_mips64r6.d: New file.
* gas/mips/mips.exp: Run the new tests.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
This makes sure `HAVE_CODE_COMPRESSION' evaluates correctly when the
`.insn' directive is used at the beginning of a source file before any
instructions have been produced and that ELF file header's MIPS16 and
microMIPS ASE flags are set correctly in the case where no instructions
have been produced other than with the said directive.
gas/
* config/tc-mips.c (s_insn): Set file options.
gas/testsuite/
* gas/mips/insn-opts.d: New test.
* gas/mips/insn-opts.s: New test source.
* gas/mips/mips.exp: Run the new test.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
This change removes code duplication for the SAA macro in line with other
such macros and also adds a !microMIPS internal consistency guard as
there's no microMIPS encoding of the underlying SAA/SAAD instructions.
* config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
jump to...
<M_SAAD_AB>: ... here. Assert that !microMIPS.
