1853 Commits

Author	SHA1	Message	Date
Kevin Buettner	3f52fdbcb5	Fix amd64->i386 linux syscall restart problem ... This commit fixes some failures in gdb.base/interrupt.exp when debugging a 32-bit i386 linux inferior from an amd64 host. When running the following test... make check RUNTESTFLAGS="--target_board unix/-m32 interrupt.exp" ... without this commit, I see the following output: FAIL: gdb.base/interrupt.exp: continue (the program exited) FAIL: gdb.base/interrupt.exp: echo data FAIL: gdb.base/interrupt.exp: Send Control-C, second time FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running) ERROR: Undefined command "". ERROR: GDB process no longer exists === gdb Summary === When the test is run with this commit in place, we see 12 passes instead. This is the desired behavior. Analysis: On Linux, when a syscall is interrupted by a signal, the syscall may return -ERESTARTSYS when a signal occurs. Doing so indicates that the syscall is restartable. Then, depending on settings associated with the signal handler, and after the signal handler is called, the kernel can then either return -EINTR or can cause the syscall to be restarted. In this discussion, we are concerned with the latter case. On i386, the kernel returns this status via the EAX register. When debugging a 32-bit (i386) process from a 64-bit (amd64) GDB, the debugger fetches 64-bit registers even though the process being debugged is 32-bit. Since we're debugging a 32-bit target, only 32 bits are being saved in the register cache. Now, ideally, GDB would save all 64-bits in the regcache and then would be able to restore those same values when it comes time to continue the target. I've looked into doing this, but it's not easy and I don't see many benefits to doing so. One benefit, however, would be that EAX would appear as a negative value for doing syscall restarts. At the moment, GDB is setting the high 32 bits of RAX (and other registers too) to 0. So, when GDB restores EAX just prior to a syscall restart, the high 32 bits of RAX are zeroed, thus making it look like a positive value. For this particular purpose, we need to sign extend EAX so that RAX will appear as a negative value when EAX is set to -ERESTARTSYS. This in turn will cause the signal handling code in the kernel to recognize -ERESTARTSYS which will in turn cause the syscall to be restarted. This commit is based on work by Jan Kratochvil from 2009: https://sourceware.org/ml/gdb-patches/2009-11/msg00592.html Jan's patch had the sign extension code in amd64-nat.c. Several other native targets make use of this code, so it seemed better to move the sign extension code to a linux specific file. I also added similar code to gdbserver. Another approach is to fix the problem in the kernel. Hui Zhu tried to get a fix into the kernel back in 2014, but it was not accepted. Discussion regarding this approach may be found here: https://lore.kernel.org/patchwork/patch/457841/ Even if a fix were to be put into the kernel, we'd still need some kind of fix in GDB in order to support older kernels. Finally, I'll note that Fedora has been carrying a similar patch for at least nine years. Other distributions, including RHEL and CentOS have picked up this change and have been using it too. gdb/ChangeLog: * amd64-linux-nat.c (amd64_linux_collect_native_gregset): New function. (fill_gregset): Call amd64_linux_collect_native_gregset instead of amd64_collect_native_gregset. (amd64_linux_nat_target::store_registers): Likewise. gdb/gdbserver/ChangeLog: * linux-x86-low.c (x86_fill_gregset): Sign extend EAX value when using a 64-bit gdbserver.	2019-04-10 17:11:24 -07:00
Tom Tromey	b0319eaaf9	Use find_thread_in_random in select_event_lwp ... I noticed that find_thread_in_random duplicates the code in find_thread_in_random, so this patch changes the latter to use the former. There are two other spots in gdb that do this, but to unify all of them would require switching some code from using the "iterate over" idiom to using iterators. Another possible improvement is that find_thread_in_random could be made single-pass using reservoir sampling. Tested by the buildbot. gdb/gdbserver/ChangeLog 2019-04-09 Tom Tromey <tromey@adacore.com> * linux-low.c (select_event_lwp): Use find_thread_in_random.	2019-04-09 12:03:25 -06:00
Tom Tromey	eedc3f4f0a	Replace throw_exception with throw in some cases ... This replaces throw_exception with "throw;" when possible. This was written by script. The rule that is followed is that uses of the form: catch (... &name) { ... throw_exception (name); } ... can be rewritten. This should always be safe, because exceptions are caught by const reference, and therefore can't be modified in the body of the catch. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * valops.c (value_rtti_indirect_type): Replace throw_exception with throw. * tracefile-tfile.c (tfile_target_open): Replace throw_exception with throw. * thread.c (thr_try_catch_cmd): Replace throw_exception with throw. * target.c (target_translate_tls_address): Replace throw_exception with throw. * stack.c (frame_apply_command_count): Replace throw_exception with throw. * solib-spu.c (append_ocl_sos): Replace throw_exception with throw. * s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception with throw. * rs6000-tdep.c (rs6000_frame_cache) (rs6000_epilogue_frame_cache): Replace throw_exception with throw. * remote.c: Replace throw_exception with throw. * record-full.c (record_full_message, record_full_wait_1) (record_full_restore): Replace throw_exception with throw. * record-btrace.c: (get_thread_current_frame_id, record_btrace_start_replaying) (cmd_record_btrace_bts_start, cmd_record_btrace_pt_start) (cmd_record_btrace_start): Replace throw_exception with throw. * parse.c (parse_exp_in_context_1): Replace throw_exception with throw. * linux-nat.c (detach_one_lwp, linux_resume_one_lwp) (resume_stopped_resumed_lwps): Replace throw_exception with throw. * linespec.c: (find_linespec_symbols): Replace throw_exception with throw. * infrun.c (displaced_step_prepare, resume): Replace throw_exception with throw. * infcmd.c (post_create_inferior): Replace throw_exception with throw. * inf-loop.c (inferior_event_handler): Replace throw_exception with throw. * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache) (i386_sigtramp_frame_cache): Replace throw_exception with throw. * frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle) (get_prev_frame_always, get_frame_pc_if_available) (get_frame_address_in_block_if_available, get_frame_language): Replace throw_exception with throw. * frame-unwind.c (frame_unwind_try_unwinder): Replace throw_exception with throw. * eval.c (fetch_subexp_value, evaluate_var_value) (evaluate_funcall, evaluate_subexp_standard): Replace throw_exception with throw. * dwarf2loc.c (call_site_find_chain) (dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval): Replace throw_exception with throw. * dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception with throw. * darwin-nat.c (darwin_attach_pid): Replace throw_exception with throw. * cp-abi.c (baseclass_offset): Replace throw_exception with throw. * completer.c (complete_line_internal): Replace throw_exception with throw. * compile/compile-object-run.c (compile_object_run): Replace throw_exception with throw. * cli/cli-script.c (process_next_line): Replace throw_exception with throw. * btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace) (btrace_enable, btrace_maint_update_pt_packets): Replace throw_exception with throw. * breakpoint.c (create_breakpoint, save_breakpoints): Replace throw_exception with throw. * break-catch-throw.c (re_set_exception_catchpoint): Replace throw_exception with throw. * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache) (amd64_epilogue_frame_cache): Replace throw_exception with throw. * aarch64-tdep.c (aarch64_make_prologue_cache) (aarch64_make_stub_cache): Replace throw_exception with throw. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * linux-low.c (linux_detach_one_lwp): Replace throw_exception with throw. (linux_resume_one_lwp): Likewise.	2019-04-08 09:05:41 -06:00
Tom Tromey	230d2906b9	Rename gdb exception types ... This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.	2019-04-08 09:05:40 -06:00
Tom Tromey	a70b814420	Rewrite TRY/CATCH ... This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.	2019-04-08 09:05:39 -06:00
Tom Tromey	3d6e9d2336	Make exceptions use std::string and be self-managing ... This changes the exception's "message" member to be a shared_ptr wrapping a std::string. This allows removing the stack of exception messages, because now exceptions will self-destruct when needed. This also adds a noexcept copy constructor and operator= to gdb_exception, plus a "what" method. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c (gdb_xml_parser::parse): Update. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * value.c (show_convenience): Update. * unittests/cli-utils-selftests.c (test_number_or_range_parser) (test_parse_flags_qcs): Update. * thread.c (thr_try_catch_cmd): Update. * target.c (target_translate_tls_address): Update. * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (info_frame_command_core, frame_apply_command_count): Update. * rust-exp.y (rust_lex_exception_test): Update. * riscv-tdep.c (riscv_print_one_register_info): Update. * remote.c (remote_target::enable_btrace): Update. * record-btrace.c (record_btrace_enable_warn): Update. * python/py-utils.c (gdbpy_convert_exception): Update. * printcmd.c (do_one_display, print_variable_and_value): Update. * mi/mi-main.c (mi_print_exception): Update. * mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * linux-nat.c (linux_nat_target::attach): Update. * linux-fork.c (class scoped_switch_fork_info): Update. * infrun.c (displaced_step_prepare): Update. * infcall.c (call_function_by_hand_dummy): Update. * guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update. * gnu-v3-abi.c (print_one_vtable): Update. * frame.c (get_prev_frame_always): Update. * f-valprint.c (info_common_command_for_block): Update. * exec.c (try_open_exec_file): Update. * exceptions.c (print_exception, exception_print) (exception_fprintf, exception_print_same): Update. * dwarf2-frame.c (dwarf2_build_frame_info): Update. * dwarf-index-cache.c (index_cache::store) (index_cache::lookup_gdb_index): Update. * darwin-nat.c (maybe_cache_shell): Update. * cp-valprint.c (cp_print_value_fields): Update. * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol) (gcc_cplus_symbol_address): Update. * compile/compile-c-symbols.c (gcc_convert_symbol) (gcc_symbol_address, generate_c_for_for_one_variable): Update. * common/selftest.c: Update. * common/common-exceptions.h (struct gdb_exception) <message>: Now a std::string. (exception_try_scope_entry, exception_try_scope_exit): Don't declare. (struct exception_try_scope): Remove. (TRY): Don't use exception_try_scope. (struct gdb_exception): Add constructor, operator=. <what>: New method. (struct gdb_exception_RETURN_MASK_ALL) (struct gdb_exception_RETURN_MASK_ERROR) (struct gdb_exception_RETURN_MASK_QUIT): Add constructor. (struct gdb_quit_bad_alloc): Update. * common/common-exceptions.c (exception_none): Change initializer. (struct catcher) <state, exception>: Initialize inline. <prev>: Remove member. (current_catcher): Remove. (catchers): New global. (exceptions_state_mc_init): Simplify. (catcher_pop): Remove. (exceptions_state_mc, exceptions_state_mc_catch): Update. (try_scope_depth, exception_try_scope_entry) (exception_try_scope_exit): Remove. (throw_exception_sjlj): Update. (exception_messages, exception_messages_size): Remove. (throw_it): Simplify. (gdb_exception_sliced_copy): Remove. (throw_exception_cxx): Update. * cli/cli-script.c (script_from_file): Update. * breakpoint.c (insert_bp_location, update_breakpoint_locations): Update. * ada-valprint.c (ada_val_print): Update. * ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr) (create_excep_cond_exprs): Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c (handle_btrace_general_set, handle_qxfer_btrace) (handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup) (captured_main, main): Update. * gdbreplay.c (main): Update.	2019-04-08 09:05:38 -06:00
Pedro Franco de Carvalho	0570503dd3	Use linux_get_auxv to get AT_PHDR in the PPC stub ... This patch fixes a build error due to a call to ppc_get_auxv that was left over after linux_get_hwcap and linux_get_hwcap2 were introduced in: 974c89e088 gdbserver: Add linux_get_hwcap Because the missing call fetched AT_PHDR and not AT_HWCAP, linux_get_auxv is now visible. This use also required ppc_get_auxv to return a status variable indicating that the AT_PHDR entry was not found separately from the actual value of of the auxv entry. Therefore, the new linux_get_auxv function is changed to return a status variable and write the entry value to a pointer passed as an argument. Note that linux_get_hwcap and linux_get_hwcap2 still use the return value as both an indicator of that the entry wasn't found and as the actual value of the entry. gdb/gdbserver/ChangeLog: 2019-04-05 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * linux-low.c (linux_get_auxv): Remove static. Return auxv entry value in argument pointer, return 1 if the entry is found and 0 otherwise. Move comment. (linux_get_hwcap, linux_get_hwcap2): Use modified linux_get_auxv. * linux-low.h (linux_get_auxv): Declare. * linux-ppc-low.c (is_elfv2_inferior): Use linux_get_auxv.	2019-04-05 14:19:08 -03:00
Tom Tromey	227a9e65b9	Use upper-case for metasyntactic in gdbserver help ... I noticed that "gdbserver --help" contains a few metasyntactic variables that aren't in upper-case. This patch fixes them to conform to the GNU standard. gdb/gdbserver/ChangeLog 2019-04-05 Tom Tromey <tromey@adacore.com> * server.c (gdbserver_usage): Use upper-case for metasyntactic variables.	2019-04-05 07:29:24 -06:00
Alan Hayward	69f4c9cc03	gdbserver: Ensure AT_HWCAP2 is defined ... When using older compilers, AT_HWCAP2 may not be be defined. It is defined in elf/common.h, however including this in gdbserver/linux-low.c causes conflicts. Manually add the define if it does not exist. gdb/gdbserver/ChangeLog: * linux-low.c (AT_HWCAP2): Add define if not already included.	2019-03-28 11:45:06 +00:00
Alan Hayward	974c89e088	gdbserver: Add linux_get_hwcap ... In gdbserver, Tidy up calls to read HWCAP (and HWCAP2) by adding common functions, removing the Arm, AArch64, PPC and S390 specific versions. No functionality differences. gdb/gdbserver/ChangeLog: * linux-aarch64-low.c (aarch64_get_hwcap): Remove function. (aarch64_arch_setup): Call linux_get_hwcap. * linux-arm-low.c (arm_get_hwcap): Remove function. (arm_read_description): Call linux_get_hwcap. * linux-low.c (linux_get_auxv): New function. (linux_get_hwcap): Likewise. (linux_get_hwcap2): Likewise. * linux-low.h (linux_get_hwcap): New declaration. (linux_get_hwcap2): Likewise. * linux-ppc-low.c (ppc_get_auxv): Remove function. (ppc_arch_setup): Call linux_get_hwcap. * linux-s390-low.c (s390_get_hwcap): Remove function. (s390_arch_setup): Call linux_get_hwcap.	2019-03-26 16:27:43 +00:00
Alan Hayward	1ef53e6b83	AArch64: gdbserver: read pauth registers ... Add the pauth registers to the regset lists. Add a new regset type OPTIONAL_REGS which allows for the regset read to fail. Once the read fails, it will not be checked again. This allows targets with optional features to keep a single static regset_info structure. gdb/ChangeLog: * arch/aarch64.h (AARCH64_PAUTH_REGS_SIZE): New define. gdb/gdbserver/ChangeLog: * linux-aarch64-low.c (aarch64_store_pauthregset): New function. * linux-low.c (regsets_store_inferior_registers): Allow optional reads to fail. * linux-low.h (enum regset_type): Add OPTIONAL_REGS.	2019-03-22 10:34:09 +00:00
Alan Hayward	ee4fbcfa26	AArch64: Use HWCAP to detect pauth feature ... Add aarch64_get_hwcap functions for reading the HWCAP. From this extract the PACA value and use this to enable pauth. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_linux_nat_target::read_description): Read PACA hwcap. * aarch64-linux-tdep.c (aarch64_linux_core_read_description): Likewise. (aarch64_linux_get_hwcap): New function. * aarch64-linux-tdep.h (AARCH64_HWCAP_PACA): New define. (aarch64_linux_get_hwcap): New declaration. gdb/gdbserver/ChangeLog: * linux-aarch64-low.c (AARCH64_HWCAP_PACA): New define. (aarch64_get_hwcap): New function. (aarch64_arch_setup): Read APIA hwcap.	2019-03-22 10:10:22 +00:00
Alan Hayward	6dc0ebde59	AArch64: Add pointer authentication feature ... Pointer Authentication is a new feature in AArch64 v8.3-a. When enabled in the compiler, function return addresses will be mangled by the kernel. Add register description xml and wire up to aarch64_linux_read_description. This description includes the two pauth user registers. Nothing yet uses the feature - that is added in later patches. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_linux_nat_target::read_description): Add pauth param. * aarch64-linux-tdep.c (aarch64_linux_core_read_description): Likewise. * aarch64-tdep.c (struct target_desc): Add in pauth. (aarch64_read_description): Add pauth param. (aarch64_gdbarch_init): Likewise. * aarch64-tdep.h (aarch64_read_description): Likewise. * arch/aarch64.c (aarch64_create_target_description): Likewise. * arch/aarch64.h (aarch64_create_target_description): Likewise. * features/Makefile: Add new files. * features/aarch64-pauth.c: New file. * features/aarch64-pauth.xml: New file. gdb/doc/ChangeLog: * gdb.texinfo: Describe pauth feature. gdb/gdbserver/ChangeLog: * linux-aarch64-ipa.c (get_ipa_tdesc): Add pauth param. (initialize_low_tracepoint): Likewise. * linux-aarch64-low.c (aarch64_arch_setup): Likewise. * linux-aarch64-tdesc-selftest.c (aarch64_tdesc_test): Likewise. * linux-aarch64-tdesc.c (struct target_desc): Likewise. (aarch64_linux_read_description): Likewise. * linux-aarch64-tdesc.h (aarch64_linux_read_description): Likewise.	2019-03-22 09:58:42 +00:00
John Baldwin	1163a4b7a3	Support the fs_base and gs_base registers on i386. ... As on amd64, these registers hold the base address of the fs and gs segments, respectively. For i386 these two registers are 32 bits. gdb/ChangeLog: * amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description): Update calls to i386_target_description to add 'segments' parameter. * amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't add segment base registers. * arch/i386.c (i386_create_target_description): Add 'segments' parameter to enable segment base registers. * arch/i386.h (i386_create_target_description): Likewise. * features/i386/32bit-segments.xml: New file. * features/i386/32bit-segments.c: Generate. * i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update call to i386_target_description to add 'segments' parameter. * i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise. * i386-go32-tdep.c (i386_go32_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_read_description): Likewise. * i386-tdep.c (i386_validate_tdesc_p): Add segment base registers if feature is present. (i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs. Add 'segments' parameter to call to i386_target_description. (i386_target_description): Add 'segments' parameter to enable segment base registers. (_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter to call to i386_target_description. * i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'. (enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM. Define I386_NUM_REGS. (i386_target_description): Add 'segments' parameter to enable segment base registers. gdb/gdbserver/ChangeLog: * linux-x86-tdesc.c (i386_linux_read_description): Update call to i386_create_target_description for 'segments' parameter. * lynx-i386-low.c (lynx_i386_arch_setup): Likewise. * nto-x86-low.c (nto_x86_arch_setup): Likewise. * win32-i386-low.c (i386_arch_setup): Likewise.	2019-03-12 13:39:02 -07:00
Tom Tromey	d3a70e03cf	Change iterate_over_lwps to take a gdb::function_view ... This changes iterate_over_lwps to use a gdb::function_view. This was needed in order to make null_ptid and minus_one_ptid 'const'. gdb/ChangeLog 2019-03-12 Tom Tromey <tromey@adacore.com> * linux-nat.c (iterate_over_lwps): Update. (stop_callback): Remove parameter. (stop_wait_callback, detach_callback, resume_set_callback) (select_singlestep_lwp_callback, set_ignore_sigint) (status_callback, resumed_callback, resume_clear_callback) (kill_callback, kill_wait_callback, linux_nat_stop_lwp): Remove data parameter. (linux_nat_target::detach, linux_nat_target::resume) (linux_stop_and_wait_all_lwps, select_event_lwp) (linux_nat_filter_event, linux_nat_wait_1) (linux_nat_target::kill, linux_nat_target::stop) (linux_nat_target::stop): Update. (linux_nat_resume_callback): Change type. (resume_stopped_resumed_lwps, count_events_callback) (select_event_lwp_callback): Likewise. (linux_stop_lwp, linux_nat_stop_lwp): Update. * arm-linux-nat.c (struct update_registers_data): Remove. (update_registers_callback): Change type. (arm_linux_insert_hw_breakpoint1): Update. * nat/x86-linux-dregs.c (update_debug_registers_callback): Remove parameter. (x86_linux_dr_set_addr): Update. (x86_linux_dr_set_control): Update. * nat/linux-nat.h (iterate_over_lwps_ftype): Remove parameter. (iterate_over_lwps): Use gdb::function_view. * nat/aarch64-linux-hw-point.c (struct aarch64_dr_update_callback_param): Remove. (debug_reg_change_callback): Change type. (aarch64_notify_debug_reg_change): Update. * s390-linux-nat.c (s390_refresh_per_info): Update. gdb/gdbserver/ChangeLog 2019-03-12 Tom Tromey <tromey@adacore.com> * linux-low.c (iterate_over_lwps): Update.	2019-03-12 10:45:35 -06:00
Tom Tromey	37991b4f52	Remove last cleanup from gdbserver ... This removes the last cleanup from gdbserver, replacing it with SCOPE_EXIT. This could perhaps be done in a different way, but this approach was direct and obviously correct. 2019-03-06 Tom Tromey <tom@tromey.com> * server.c (detach_or_kill_for_exit_cleanup): Remove parameter. (captured_main): Use SCOPE_EXIT.	2019-03-06 16:04:31 -07:00
Sergio Durigan Junior	45950eb600	Use '$enable_unittest' instead of '$development' on gdbserver/configure.srv (for 'aarch64*-*-linux*' case) ... On commit 8ecfd7bd4a ("Add parameter to allow enabling/disabling selftests via configure") it seems that I forgot to use the proper '$enable_unittest' variable when checking to see whether to add selftest-related objects to 'srv_regobj'. This causes a build failure on Aarch64 when 'development=false' (which is the case for the 8.3 branch) and 'enable_unittest=true'. This patch fixes the problem by using '$enable_unittest' instead of '$development' when performing the check. As a reminder, it's important to notice that '$enable_unittest's default value (i.e., when the option '--enable-unit-tests' is not passed to configure) is the same as '$development', so this patch doesn't affect the current build. I'd like to install this patch both on master and on the 8.3 branch. OK? gdb/gdbserver/ChangeLog: 2019-03-04 Sergio Durigan Junior <sergiodj@redhat.com> * configure.srv: Use '$enable_unittest' instead of '$development' when checking whether to fill 'srv_regobj' on 'aarch64*-*-linux*' case.	2019-03-04 12:47:35 -05:00
Eli Zaretskii	41fa577fbc	Fix GDB compilation on MinGW (PR gdb/24292) ... gdb/ChangeLog: 2019-03-02 Eli Zaretskii <eliz@gnu.org> PR gdb/24292 * common/netstuff.c: * gdbserver/gdbreplay.c * gdbserver/remote-utils.c: * ser-tcp.c: * unittests/parse-connection-spec-selftests.c [USE_WIN32API]: Include ws2tcpip.h instead of wsiapi.h and winsock2.h. Redefine _WIN32_WINNT to 0x0501 if defined to a smaller value, as 'getaddrinfo' and 'freeaddrinfo' were not available before Windows XP, and mingw.org's MinGW headers by default define _WIN32_WINNT to 0x500.	2019-03-02 15:13:54 +02:00
Tom Tromey	43ac54fca3	Handle \r\n in gdbreplay ... I tried gdbreplay yesterday, but the remotelogfile I received was made on Windows, so the lines were terminated with \r\n rather than plain \n. This patch changes gdbreplay to allow \r\n line termination when reading the log file. gdb/gdbserver/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * gdbreplay.c (logchar): Handle \r\n.	2019-02-27 11:54:24 -07:00
Alan Hayward	df0da8a2b8	gdbserver: When attaching, add process before lwps ... The recent BP/WP changes for AArch64 swapping the order in add_lwp() so that the process was added before the lwp. This was due to the lwp creation requiring the process data. This also needs changing in linux_attach(). Also add additional checks to make sure cannot attach to the same process twice. Add test case for this - do this by splitting attach.exp into distinct pass and error case sections. Fixes gdb.server/ext-attach.exp on Aarch64. gdb/gdbserver/ChangeLog: * linux-low.c (linux_attach): Add process before lwp. * server.c (attach_inferior): Check if already attached. gdb/testsuite/ChangeLog: * gdb.base/attach.exp: Add double attach test.	2019-02-07 14:37:45 +00:00
Tom Tromey	1a5c25988e	Normalize include guards in gdb ... While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard.	2019-02-07 03:27:23 -07:00
Szabolcs Nagy	956cc47c56	[PR gdb/23985] Fix libinproctrace.so build ... The IPA objects currently may use gnulib replacement apis, which is wrong: gnulib is not linked into the produced dso and it cannot be because it is not built with -fPIC -fvisibility=hidden. The gnulib replacement detection is broken under cross compilation: for targets other than *-gnu*, replacements are enabled that depend on execution time detection. This causes unnecessary build failure when the target has proper support for the replaced api. This fix tries to undo the replacements, which is tricky because the gnulib headers are still used for various compile time fixups and there is no simple knob in gnulib to only turn the replacements off. Without this workaround gdb fails to cross build to non-gnu targets: ld: tracepoint-ipa.o: in function `gdb_agent_helper_thread(void*)': gdb/gdbserver/tracepoint.c:7221: undefined reference to `rpl_strerror' ... Makefile:434: recipe for target 'libinproctrace.so' failed gdb/gdbserver/ChangeLog: PR gdb/23985 * Makefile.in (IPAGENT_CFLAGS): Add UNDO_GNULIB_CFLAGS. (UNDO_GNULIB_CFLAGS): Undo gnulib replacements.	2019-01-30 18:03:36 +00:00
Alan Hayward	9ee1941355	Revert "gdbserver: When attaching, add process before lwps" ... This reverts commit f084d33511. Accidently pushed. Reverted.	2019-01-28 16:21:00 +00:00
Alan Hayward	f084d33511	gdbserver: When attaching, add process before lwps ... The recent BP/WP changes for AArch64 swapping the order in add_lwp() so that the process was added before the lwp. This was due to the lwp creation requiring the process data. This also needs changing in linux_attach(). Fixes gdb.server/ext-attach.exp on Aarch64. (This regression was hidden due to the racy nature of the gdb.server tests - now they are no longer racy it'll be easier to spot. Also checked X86). gdb/gdbserver/ChangeLog: 2019-01-25 Alan Hayward <alan.hayward@arm.com> * linux-low.c (linux_attach): Add process before lwp.	2019-01-28 09:34:51 +00:00
Tom Tromey	a0707f3c36	Don't use -I for common subdirectory ... This changes the Makefiles to remove the -I for the common/ subdirectory. This will enforce the rule that includes must use the 'common/filename.h' form. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * Makefile.in (GDB_CFLAGS): Don't add -I for common. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * Makefile.in (INCLUDE_CFLAGS): Don't add -I for common.	2019-01-25 15:28:17 -07:00
Tom Tromey	0747795c08	Normalize includes to use common/ ... This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.	2019-01-25 15:28:16 -07:00
Tom Tromey	be6d4f74c7	Remove duplicate or commented-out #includes ... I wrote a little script to detect duplicate or commented-out #includes and ran it on gdb. This patch is the result. Tested by rebuilding. gdb/ChangeLog 2019-01-21 Tom Tromey <tom@tromey.com> * ui-out.c: Fix includes. * tui/tui-source.c: Fix includes. * target.c: Fix includes. * remote.c: Fix includes. * regcache.c: Fix includes. * python/py-block.c: Fix includes. * printcmd.c: Fix includes. * or1k-tdep.c: Fix includes. * mi/mi-main.c: Fix includes. * m32r-tdep.c: Fix includes. * csky-tdep.c: Fix includes. * compile/compile-cplus-types.c: Fix includes. * cli/cli-interp.c: Fix includes. gdb/gdbserver/ChangeLog 2019-01-21 Tom Tromey <tom@tromey.com> * tracepoint.c: Fix includes. * remote-utils.c: Fix includes. * linux-x86-low.c: Fix includes. gdb/stubs/ChangeLog 2019-01-21 Tom Tromey <tom@tromey.com> * ia64vms-stub.c: Fix includes.	2019-01-21 11:14:07 -07:00
Joel Brobecker	66d91b3908	update copyright year printed by gdb, gdbserver and gdbreplay ... gdb/ChangeLog: * top.c (print_gdb_version): Update Copyright year in version message. gdb/gdbserver/ChangeLog: * gdbreplay.c (gdbreplay_version): Update copyright year in version message. * server.c (gdbserver_version): Likewise.	2019-01-01 10:09:59 +04:00
Joel Brobecker	42a4f53d2b	Update copyright year range in all GDB files. ... This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.	2019-01-01 10:01:51 +04:00
Alan Hayward	754e316898	AArch64: Racy: Don't set empty set of hardware BPs/WPs on new thread ... On some heavily loaded AArch64 boxes, GDB will sometimes hang forever when the inferior creates a thread. This hang happens inside the kernel during the ptrace call to set hardware watchpoints or hardware breakpoints. Currently, GDB will always set hw wp/bp at the start of each thread even if there are none set in the process. This patch works around the issue by avoiding setting hw wp/bp if there are none set for the process. On an effected machine, this fix drastically reduces the racy nature of the gdb.threads test set. I ran the entire gdb test suite across all processors for 100 iterations, then ran the results through the racy tests script. Without the patch, 58 .exp files in gdb.threads were marked as racy. After the patch this reduced to the same ~14 tests as the non effected boxes. Clearly GDB will still be subject to hangs on an effect box if hw wp/bp's are used prior to creating inferior threads on a heavily loaded system. To enable this in gdbserver, the sequence in gdbserver add_lwp() is switched to the same as gdb order as gdb, to ensure the thread is registered before calling new_thread(). This allows aarch64_linux_new_thread() to read the ptid. gdb/ChangeLog: * nat/aarch64-linux-hw-point.c (aarch64_linux_any_set_debug_regs_state): New function. * nat/aarch64-linux-hw-point.h (aarch64_linux_any_set_debug_regs_state): New declaration. * nat/aarch64-linux.c (aarch64_linux_new_thread): Check if any BPs or WPs are set. gdb/gdbserver/ChangeLog: * linux-low.c (add_lwp): Switch ordering.	2018-12-05 10:44:03 +00:00
Tom Tromey	d105de22fc	Fix use-after-free in gdbserver ... -fsanitize=address pointed out a use-after-free in gdbserver. In particular, handle_detach could reference "process" after it was deleted by detach_inferior. Avoiding this also necessitated changing target_ops::join to take a pid rather than a process_info*. Tested by the buildbot using a few of the gdbserver builders. gdb/gdbserver/ChangeLog 2018-11-29 Tom Tromey <tom@tromey.com> * win32-low.c (win32_join): Take pid, not process. * target.h (struct target_ops) <join>: Change argument type. (join_inferior): Change argument name. * spu-low.c (spu_join): Take pid, not process. * server.c (handle_detach): Preserve pid before destroying process. * lynx-low.c (lynx_join): Take pid, not process. * linux-low.c (linux_join): Take pid, not process.	2018-11-29 10:47:42 -07:00
Alan Hayward	5013824590	gdbserver: AArch64: Remove cannot_fetch/store_register ... The cannot store/fetch register functions are only used for checking if a register can be accessed using PEEKUSER/POKEUSER. The AArch64 port doesn't support this method of access, so remove the unused functions. gdb/gdbserver: * linux-aarch64-low.c (aarch64_cannot_store_register): Remove. (aarch64_cannot_fetch_register): Likewise. (struct linux_target_ops): Update references.	2018-11-23 14:12:46 +00:00
Pedro Franco de Carvalho	64f57f3d7d	[PowerPC] Include nat/linux-ptrace.h in native targets ... Patch "[PowerPC] Add support for PPR and DSCR" used PTRACE_GETREGSET/SETREGSET without including the fallback definitions from "nat/linux-ptrace.h". Include this header to avoid breaking builds in systems that don't define them. gdb/ChangeLog: 2018-10-31 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * ppc-linux-nat.c: Include nat/linux-ptrace.h. gdb/gdbserver/ChangeLog: 2018-10-31 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * linux-ppc-low.c: Include nat/linux-ptrace.h.	2018-10-31 10:59:26 -03:00
Simon Marchi	80e24d0986	Revert "GDBSERVER: Listen on a unix domain (instead of TCP) socket if requested." ... This reverts commit f19c7ff839.	2018-10-29 13:28:24 -04:00
Edjunior Barbosa Machado	8d619c01db	[PowerPC] Add support for HTM registers ... This patch adds support for Hardware Transactional Memory registers for the powerpc linux native and core file targets, and for the pwoerpc linux server stub. These registers include both the HTM special-purpose registers (TFHAR, TEXASR and TFIAR) as well as the set of registers that are checkpointed (saved) when a transaction is initiated, which the processor restores in the event of a transaction failure. The set of checkpointed general-purpose registers is returned by the linux kernel in the same format as the regular general-purpose registers, defined in struct pt_regs. However, the architecture specifies that only some of the registers present in pt_regs are checkpointed (GPRs 0-31, CR, XER, LR and CTR). The kernel fills the slots for MSR and NIP with other info. The other fields usually don't have meaningful values. GDB doesn't define registers that are not checkpointed in the architecture, but when generating a core file, GDB fills the slot for the checkpointed MSR with the regular MSR. These are usually similar, although some bits might be different, and in some cases the checkpointed MSR will have a value of 0 in a kernel-generated core-file. The checkpointed NIP is filled with TFHAR by GDB in the core-file, which is what the kernel does. The other fields are set to 0 by GDB. Core files generated by the kernel have a note section for checkpointed GPRs with the same size for both 32-bit and 64-bit threads, and the values for the registers of a 32-bit thread are squeezed in the first half, with no useful data in the second half. GDB generates a smaller note section for 32-bit threads, but can read both sizes. The checkpointed XER is required to be 32-bit in the target description documentation, even though the more recent ISAs define it as 64-bit wide, since the high-order 32-bits are reserved, and because in Linux there is no way to get a 64-bit checkpointed XER for 32-bit threads. If this changes in the future, the target description feature requirement can be relaxed to allow for a 64-bit checkpointed XER. Access to the checkpointed CR (condition register) can be confusing. The architecture only specifies that CR fields 1 to 7 (the 24 least significant bits) are checkpointed, but the kernel provides all 8 fields (32 bits). The value of field 0 is not masked by ptrace, so it will sometimes show the result of some kernel operation, probably treclaim., which sets this field. The checkpointed registers are marked not to be saved and restored. Inferior function calls during an active transaction don't work well, and it's unclear what should be done in this case. TEXASR and TFIAR can be altered asynchronously, during transaction failure recording, so they are also not saved and restored. For consistency neither is TFHAR. Record and replay also doesn't work well when transactions are involved. This patch doesn't address this, so the values of the HTM SPRs will sometimes be innacurate when the record/relay target is enabled. For instance, executing a "tbegin." alters TFHAR and TEXASR, but these changes are not currently recorded. Because the checkpointed registers are only available when a transaction is active (or suspended), ptrace can return ENODATA when gdb tries to read these registers and the inferior is not in a transactional state. The registers are set to the unavailable state when this happens. When gbd tries to write to one of these registers, and it is unavailable, an error is raised. The "fill" functions for checkpointed register sets in the server stub are not implemented for the same reason as for the EBB register set, since ptrace can also return ENODATA for checkpointed regsets. The same issues with 'G' packets apply here. Just like for the EBB registers, tracepoints will not mark the checkpointed registers as unavailable if the inferior was not in a transaction, so their content will also show 0 instead of <unavailable> when inspecting trace data. The new tests record the values of the regular registers before stepping the inferior through a "tbegin." instruction to start a transaction, then the checkpointed registers are checked against the recorded pre-transactional values. New values are written to the checkpointed registers and recorded, the inferior continues until the transaction aborts (which is usually immediately when it is resumed), and the regular registers are checked against the recorded values, because the abort should have reverted the registers to these values. Like for the EBB registers, target_store_registers will ignore the checkpointed registers when called with -1 as the regno argument (store all registers in one go). gdb/ChangeLog: 2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_htm_vsx32l) (tdesc_powerpc_isa207_htm_vsx64l): Declare. * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TM_SPRREGSET) (PPC32_LINUX_SIZEOF_CGPRREGSET, PPC64_LINUX_SIZEOF_CGPRREGSET) (PPC_LINUX_SIZEOF_CFPRREGSET, PPC_LINUX_SIZEOF_CVMXREGSET) (PPC_LINUX_SIZEOF_CVSXREGSET, PPC_LINUX_SIZEOF_CPPRREGSET) (PPC_LINUX_SIZEOF_CDSCRREGSET, PPC_LINUX_SIZEOF_CTARREGSET): Define. (struct ppc_linux_features) <htm>: New field. (ppc_linux_no_features): Add initializer for htm field. * arch/ppc-linux-common.c (ppc_linux_match_description): Return new tdescs. * nat/ppc-linux.h (PPC_FEATURE2_HTM, NT_PPC_TM_CGPR) (NT_PPC_TM_CFPR, NT_PPC_TM_CVMX, NT_PPC_TM_CVSX) (NT_PPC_TM_SPR, NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR): Define if not already defined. * features/Makefile (WHICH): Add rs6000/powerpc-isa207-htm-vsx32l and rs6000/powerpc-isa207-htm-vsx64l. (XMLTOC): Add rs6000/powerpc-isa207-htm-vsx32l.xml and rs6000/powerpc-isa207-htm-vsx64l.xml. * features/rs6000/power-htm-spr.xml: New file. * features/rs6000/power-htm-core.xml: New file. * features/rs6000/power64-htm-core.xml: New file. * features/rs6000/power-htm-fpu.xml: New file. * features/rs6000/power-htm-altivec.xml: New file. * features/rs6000/power-htm-vsx.xml: New file. * features/rs6000/power-htm-ppr.xml: New file. * features/rs6000/power-htm-dscr.xml: New file. * features/rs6000/power-htm-tar.xml: New file. * features/rs6000/powerpc-isa207-htm-vsx32l.xml: New file. * features/rs6000/powerpc-isa207-htm-vsx64l.xml: New file. * features/rs6000/powerpc-isa207-htm-vsx32l.c: Generate. * features/rs6000/powerpc-isa207-htm-vsx64l.c: Generate. * regformats/rs6000/powerpc-isa207-htm-vsx32l.dat: Generate. * regformats/rs6000/powerpc-isa207-htm-vsx64l.dat: Generate. * ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call fetch_regset with HTM regsets. (store_register, store_ppc_registers): Call store_regset with HTM regsets. (ppc_linux_nat_target::read_description): Set htm field in the features struct if needed. * ppc-linux-tdep.c: Include features/rs6000/powerpc-isa207-htm-vsx32l.c and features/rs6000/powerpc-isa207-htm-vsx64l.c. (ppc32_regmap_tm_spr, ppc32_regmap_cgpr, ppc64_le_regmap_cgpr) (ppc64_be_regmap_cgpr, ppc32_regmap_cfpr, ppc32_le_regmap_cvmx) (ppc32_be_regmap_cvmx, ppc32_regmap_cvsx, ppc32_regmap_cppr) (ppc32_regmap_cdscr, ppc32_regmap_ctar): New globals. (ppc32_linux_tm_sprregset, ppc32_linux_cgprregset) (ppc64_be_linux_cgprregset, ppc64_le_linux_cgprregset) (ppc32_linux_cfprregset, ppc32_le_linux_cvmxregset) (ppc32_be_linux_cvmxregset, ppc32_linux_cvsxregset) (ppc32_linux_cpprregset, ppc32_linux_cdscrregset) (ppc32_linux_ctarregset): New globals. (ppc_linux_cgprregset, ppc_linux_cvmxregset): New functions. (ppc_linux_collect_core_cpgrregset): New function. (ppc_linux_iterate_over_regset_sections): Call back with the htm regsets. (ppc_linux_core_read_description): Check if the tm spr section is present and set htm in the features struct. (_initialize_ppc_linux_tdep): Call initialize_tdesc_powerpc_isa207_htm_vsx32l and initialize_tdesc_powerpc_isa207_htm_vsx64l. * ppc-linux-tdep.h (ppc_linux_cgprregset, ppc_linux_cvmxregset): Declare. (ppc32_linux_tm_sprregset, ppc32_linux_cfprregset) (ppc32_linux_cvsxregset, ppc32_linux_cpprregset) (ppc32_linux_cdscrregset, ppc32_linux_ctarregset): Declare. * ppc-tdep.h (struct gdbarch_tdep) <have_htm_spr, have_htm_core>: New fields. <have_htm_fpu, have_htm_altivec, have_htm_vsx>: Likewise. <ppc_cppr_regnum, ppc_cdscr_regnum, ppc_ctar_regnum>: Likewise. <ppc_cdl0_regnum, ppc_cvsr0_regnum, ppc_cefpr0_regnum>: Likewise. (enum) <PPC_TFHAR_REGNUM, PPC_TEXASR_REGNUM, PPC_TFIAR_REGNUM>: New enum fields. <PPC_CR0_REGNUM, PPC_CCR_REGNUM, PPC_CXER_REGNUM>: Likewise. <PPC_CLR_REGNUM, PPC_CCTR_REGNUM, PPC_CF0_REGNUM>: Likewise. <PPC_CFPSCR_REGNUM, PPC_CVR0_REGNUM, PPC_CVSCR_REGNUM>: Likewise. <PPC_CVRSAVE_REGNUM, PPC_CVSR0_UPPER_REGNUM>: Likewise. <PPC_CPPR_REGNUM, PPC_CDSCR_REGNUM>: Likewise. <PPC_CTAR_REGNUM>: Likewise. (PPC_IS_TMSPR_REGNUM, PPC_IS_CKPTGP_REGNUM, PPC_IS_CKPTFP_REGNUM) (PPC_IS_CKPTVMX_REGNUM, PPC_IS_CKPTVSX_REGNUM): Define. * rs6000-tdep.c (IS_CDFP_PSEUDOREG, IS_CVSX_PSEUDOREG) (IS_CEFP_PSEUDOREG): Define. (rs6000_register_name): Hide the upper halves of checkpointed VSX registers. Return names for the checkpointed DFP, VSX, and EFP pseudo registers. (rs6000_pseudo_register_type): Remove initial assert and raise an internal error in the else clause instead. Return types for the checkpointed DFP, VSX, and EFP pseudo registers. (dfp_pseudo_register_read, dfp_pseudo_register_write): Handle checkpointed DFP pseudo registers. (vsx_pseudo_register_read, vsx_pseudo_register_write): Handle checkpointed VSX pseudo registers. (efp_pseudo_register_read, efp_pseudo_register_write): Rename from efpr_pseudo_register_read and efpr_pseudo_register_write. Handle checkpointed EFP pseudo registers. (rs6000_pseudo_register_read, rs6000_pseudo_register_write): Handle checkpointed DFP, VSX, and EFP registers. (dfp_ax_pseudo_register_collect, vsx_ax_pseudo_register_collect) (efp_ax_pseudo_register_collect): New functions. (rs6000_ax_pseudo_register_collect): Move DFP, VSX and EFP pseudo register logic to new functions. Handle checkpointed DFP, VSX, and EFP pseudo registers. (rs6000_gdbarch_init): Look for and validate the htm features. Include checkpointed DFP, VSX and EFP pseudo-registers. * NEWS: Mention access to PPR, DSCR, TAR, EBB/PMU registers and HTM registers. gdb/gdbserver/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * configure.srv (ipa_ppc_linux_regobj): Add powerpc-isa207-htm-vsx32l-ipa.o and powerpc-isa207-htm-vsx64l-ipa.o. (powerpc*-*-linux*): Add powerpc-isa207-htm-vsx32l.o and powerpc-isa207-htm-vsx64l.o to srv_regobj. Add rs6000/power-htm-spr.xml, rs6000/power-htm-core.xml, rs6000/power64-htm-core.xml, rs6000/power-htm-fpu.xml, rs6000/power-htm-altivec.xml, rs6000/power-htm-vsx.xml, rs6000/power-htm-ppr.xml, rs6000/power-htm-dscr.xml, rs6000/power-htm-tar.xml, rs6000/powerpc-isa207-htm-vsx32l.xml, and rs6000/powerpc-isa207-htm-vsx64l.xml to srv_xmlfiles. * linux-ppc-tdesc-init.h (enum ppc_linux_tdesc) <PPC_TDESC_ISA207_HTM_VSX>: New enum value. (init_registers_powerpc_isa207_htm_vsx32l) (init_registers_powerpc_isa207_htm_vsx64l): Declare. * linux-ppc-low.c (ppc_fill_tm_sprregset, ppc_store_tm_sprregset) (ppc_store_tm_cgprregset, ppc_store_tm_cfprregset) (ppc_store_tm_cvrregset, ppc_store_tm_cvsxregset) (ppc_store_tm_cpprregset, ppc_store_tm_cdscrregset) (ppc_store_tm_ctarregset): New functions. (ppc_regsets): Add entries for HTM regsets. (ppc_arch_setup): Set htm in features struct when needed. Set sizes for the HTM regsets. (ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_HTM_VSX. (initialize_low_arch): Call init_registers_powerpc_isa207_htm_vsx32l and init_registers_powerpc_isa207_htm_vsx64l. * linux-ppc-ipa.c (get_ipa_tdesc): Handle PPC_TDESC_ISA207_HTM_VSX. (initialize_low_tracepoint): Call init_registers_powerpc_isa207_htm_vsx32l and init_registers_powerpc_isa207_htm_vsx64l. gdb/testsuite/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * gdb.arch/powerpc-htm-regs.c: New file. * gdb.arch/powerpc-htm-regs.exp: New file. gdb/doc/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * gdb.texinfo (PowerPC Features): Describe new features "org.gnu.gdb.power.htm.spr", "org.gnu.gdb.power.htm.core", "org.gnu.gdb.power.htm.fpu", "org.gnu.gdb.power.htm.altivec", "org.gnu.gdb.power.htm.vsx", "org.gnu.gdb.power.htm.ppr", "org.gnu.gdb.power.htm.dscr", "org.gnu.gdb.power.htm.tar".	2018-10-26 10:23:01 -03:00
Edjunior Barbosa Machado	232bfb8644	[PowerPC] Add support for EBB and PMU registers ... This patch adds support for registers of the Event Based Branching and Performance Monitoring Units for the powerpc linux native and core file targets, and for the powerpc linux server stub. All three EBB registers are accessible. Only a subset of the PMU registers can be accessed through ptrace. Because of this, the PMU registers are enumerated individually in gdbarch_tdep, as opposed to having a single "have_pmu" flag. This is intended to make it easier to add additional PMU registers in the future, since checking a "have_pmu" flag elsewhere in the code would no longer be correct. The tdesc feature is named org.gnu.gdb.power.linux.pmu because of this. It's unclear if it makes sense to save and restore these registers across function calls, since some of them can be modified asynchronously. They are also not tracked in record-replay mode. The kernel can return ENODATA when ptrace is used to get the EBB registers, unless a linux performance event that uses EBB is open in the inferior. For this reason, the "fill" functions in the server stub for the ebb register sets is not implemented. Since gdbserver writes all registers in one go before resuming the inferior, this error would not be detected at the time the user tries to write to one of the registers on the client side, and gdbserver would print out warnings every time it resumes the inferior when no ebb performance event is opened, so there is currently no straightforward way to handle this case. This means the ebb registers in the client-side regcache can become dirty when the user tries to write to them, until the inferior is resumed and stopped again. A related issue is that 'G' packets used to write to unrelated registers will include bad data for the EBB registers if they are unavailable, since no register status information is included in the 'G' packet. This data won't be written to the inferior by the gdbserver stub because the "fill" functions are not implemented, and currently the gdbserver stub doesn't change the status of the registers in its own regcache in response to 'G' packets. Another limitation for the ebb registers is that traceframes don't record if registers are available or not, so if these registers are collected when a tracepoint is hit and the inferior has no ebb event opened, the user will see zero values for all of them, instead of the usual <unavailable>. Because these registers are often unavailable, trying to store them with target_store_registers with -1 for the regno argument (all registers) would almost always fail, so they are ignored in this case. gdb/ChangeLog: 2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_EBBREGSET) (PPC_LINUX_SIZEOF_PMUREGSET): Declare. * nat/ppc-linux.h (PPC_FEATURE2_EBB, NT_PPC_EBB, NT_PPC_PMU): Define if not already defined. * features/rs6000/power-ebb.xml: New file. * features/rs6000/power-linux-pmu.xml: New file. * features/rs6000/powerpc-isa207-vsx32l.xml: Include ebb and pmu features. * features/rs6000/powerpc-isa207-vsx64l.xml: Likewise. * features/rs6000/powerpc-isa207-vsx32l.c: Re-generate. * features/rs6000/powerpc-isa207-vsx64l.c: Re-generate. * regformats/rs6000/powerpc-isa207-vsx32l.dat: Re-generate. * regformats/rs6000/powerpc-isa207-vsx64l.dat: Re-generate. * ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call fetch_regset with ebb and pmu regsets. (store_register, store_ppc_registers): Call store_regset with ebb and pmu regsets. (ppc_linux_nat_target::read_description): Set isa207 field in the features struct if ebb and pmu are avaiable. * ppc-linux-tdep.c (ppc32_regmap_ebb, ppc32_regmap_pmu) (ppc32_linux_ebbregset, ppc32_linux_pmuregset): New globals. (ppc_linux_iterate_over_regset_sections): Call back with the ebb and pmu regsets. (ppc_linux_core_read_description): Check if the pmu section is present and set isa207 in the features struct. * ppc-linux-tdep.h (ppc32_linux_ebbregset) (ppc32_linux_pmuregset): Declare. * ppc-tdep.h (struct gdbarch_tdep) <ppc_mmcr0_regnum>: New field. <ppc_mmcr2_regnum, ppc_siar_regnum, ppc_sdar_regnum>: New fields. <ppc_sier_regnum>: New field. (enum): <PPC_BESCR_REGNUM, PPC_EBBHR_REGNUM, PPC_EBBRR_REGNUM>: New enum values. <PPC_MMCR0_REGNUM, PPC_MMCR2_REGNUM, PPC_SIAR_REGNUM>: New enum values. <PPC_SDAR_REGNUM, PPC_SIER_REGNUM>: New enum values. (PPC_IS_EBB_REGNUM, PPC_IS_PMU_REGNUM): Define. * rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate the ebb and pmu features. gdb/gdbserver/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * configure.srv (powerpc*-*-linux*): Add rs6000/power-ebb.xml and rs6000/power-linux-pmu.xml to srv_xmlfiles. * linux-ppc-low.c (ppc_store_ebbregset, ppc_fill_pmuregset) (ppc_store_pmuregset): New functions. (ppc_regsets): Add entries for ebb and pmu regsets. (ppc_arch_setup): Set isa207 in features struct if the ebb and pmu regsets are available. Set sizes for these regsets. gdb/doc/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * gdb.texinfo (PowerPC Features): Describe new features "org.gnu.gdb.power.ebb" and "org.gnu.gdb.power.linux.pmu".	2018-10-26 10:15:23 -03:00
Edjunior Barbosa Machado	f2cf6173f3	[PowerPC] Add support for TAR ... This patch adds support for the Target Address Register for powerpc linux native and core file targets, and in the powerpc linux server stub. gdb/ChangeLog: 2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_vsx32l) (tdesc_powerpc_isa207_vsx64l): Declare. * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TARREGSET): Define. (struct ppc_linux_features) <isa207>: New field. (ppc_linux_no_features): Add initializer for isa207 field. * arch/ppc-linux-common.c (ppc_linux_match_description): Return new tdescs. * nat/ppc-linux.h (PPC_FEATURE2_ARCH_2_07, PPC_FEATURE2_TAR) (NT_PPC_TAR): Define if not already defined. * features/Makefile (WHICH): Add rs6000/powerpc-isa207-vsx32l and rs6000/powerpc-isa207-vsx64l. (XMLTOC): Add rs6000/powerpc-isa207-vsx32l.xml and rs6000/powerpc-isa207-vsx64l.xml. * features/rs6000/power-tar.xml: New file. * features/rs6000/powerpc-isa207-vsx32l.xml: New file. * features/rs6000/powerpc-isa207-vsx64l.xml: New file. * features/rs6000/powerpc-isa207-vsx32l.c: Generate. * features/rs6000/powerpc-isa207-vsx64l.c: Generate. * regformats/rs6000/powerpc-isa207-vsx32l.dat: Generate. * regformats/rs6000/powerpc-isa207-vsx64l.dat: Generate. * ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call fetch_regset with the TAR regset. (store_register, store_ppc_registers): Call store_regset with the TAR regset. (ppc_linux_nat_target::read_description): Set isa207 field in the features struct if needed. * ppc-linux-tdep.c: Include features/rs6000/powerpc-isa207-vsx32l.c and features/rs6000/powerpc-isa207-vsx64l.c. (ppc32_regmap_tar, ppc32_linux_tarregset): New globals. (ppc_linux_iterate_over_regset_sections): Call back with the tar regset. (ppc_linux_core_read_description): Check if the tar section is present and set isa207 in the features struct. (_initialize_ppc_linux_tdep): Call initialize_tdesc_powerpc_isa207_vsx32l and initialize_tdesc_powerpc_isa207_vsx64l. * ppc-linux-tdep.h (ppc32_linux_tarregset): Declare. * ppc-tdep.h (gdbarch_tdep) <ppc_tar_regnum>: New field. (enum) <PPC_TAR_REGNUM>: New enum value. * rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate tar feature. (ppc_process_record_op31): Record changes to TAR. gdb/gdbserver/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * configure.srv (ipa_ppc_linux_regobj): Add powerpc-isa207-vsx64l-ipa.o and powerpc-isa207-vsx32l-ipa.o. (powerpc*-*-linux*): Add powerpc-isa207-vsx32l.o and powerpc-isa207-vsx64l.o to srv_regobj, add rs6000/power-tar.xml, rs6000/powerpc-isa207-vsx32l.xml, and rs6000/powerpc-isa207-vsx64l.xml to srv_xmlfiles. * linux-ppc-tdesc-init.h (enum ppc_linux_tdesc) <PPC_TDESC_ISA207_VSX>: New enum value. (init_registers_powerpc_isa207_vsx32l): Declare. (init_registers_powerpc_isa207_vsx64l): Declare. * linux-ppc-low.c (ppc_fill_tarregset): New function. (ppc_store_tarregset): New function. (ppc_regsets): Add entry for the TAR regset. (ppc_arch_setup): Set isa207 in features struct when needed. Set size for the TAR regsets. (ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_VSX. (initialize_low_arch): Call init_registers_powerpc_isa207_vsx32l and init_registers_powerpc_isa207_vsx64l. * linux-ppc-ipa.c (get_ipa_tdesc): Handle PPC_TDESC_ISA207_VSX. (initialize_low_tracepoint): Call init_registers_powerpc_isa207_vsx32l and init_registers_powerpc_isa207_vsx64l. gdb/testsuite/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * gdb.arch/powerpc-tar.c: New file. * gdb.arch/powerpc-tar.exp: New file. gdb/doc/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * gdb.texinfo (PowerPC Features): Describe new feature "org.gnu.gdb.power.tar".	2018-10-26 10:11:33 -03:00
Edjunior Barbosa Machado	7ca18ed6d2	[PowerPC] Add support for PPR and DSCR ... This patch adds gdb support for the Program Priorty Register and the Data Stream Control Register, for the powerpc linux native and core file targets, and for the powerpc linux server stub. gdb/ChangeLog: 2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * arch/ppc-linux-tdesc.h (tdesc_powerpc_isa205_ppr_dscr_vsx32l) (tdesc_powerpc_isa205_ppr_dscr_vsx64l): Declare. * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_PPRREGSET) (PPC_LINUX_SIZEOF_DSCRREGSET): Define. (struct ppc_linux_features) <ppr_dscr>: New field. (ppc_linux_no_features): Add initializer for ppr_dscr field. * arch/ppc-linux-common.c (ppc_linux_match_description): Return new tdescs. * nat/ppc-linux.h (PPC_FEATURE2_DSCR, NT_PPC_PPR, NT_PPC_DSCR): Define if not already defined. * features/Makefile (WHICH): Add rs6000/powerpc-isa205-ppr-dscr-vsx32l and rs6000/powerpc-isa205-ppr-dscr-vsx64l. (XMLTOC): Add rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml. * features/rs6000/power-dscr.xml: New file. * features/rs6000/power-ppr.xml: New file. * features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml: New file. * features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml: New file. * features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Generate. * features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Generate. * regformats/rs6000/powerpc-isa205-ppr-dscr-vsx32l.dat: Generate. * regformats/rs6000/powerpc-isa205-ppr-dscr-vsx64l.dat: Generate. * ppc-linux-nat.c: Include <sys/uio.h>. (fetch_regset, store_regset, check_regset): New functions. (fetch_register, fetch_ppc_registers): Call fetch_regset with DSCR and PPR regsets. (store_register, store_ppc_registers): Call store_regset with DSCR and PPR regsets. (ppc_linux_get_hwcap2): New function. (ppc_linux_nat_target::read_description): Call ppc_linux_get_hwcap2 and check_regset, set ppr_dscr field in the features struct if needed. * ppc-linux-tdep.c: Include features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c and features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c. (ppc32_regmap_ppr, ppc32_regmap_dscr, ppc32_linux_pprregset) (ppc32_linux_dscrregset): New globals. (ppc_linux_iterate_over_regset_sections): Call back with the ppr and dscr regsets. (ppc_linux_core_read_description): Check if the ppr and dscr sections are present and set ppr_dscr in the features struct. (_initialize_ppc_linux_tdep): Call initialize_tdesc_powerpc_isa205_ppr_dscr_vsx32l and initialize_tdesc_powerpc_isa205_ppr_dscr_vsx64l. * ppc-linux-tdep.h (ppc32_linux_pprregset) (ppc32_linux_dscrregset): Declare. * ppc-tdep.h (struct gdbarch_tdep) <ppc_ppr_regnum>: New field. <ppc_dscr_regnum>: New field. (enum) <PPC_PPR_REGNUM, PPC_DSCR_REGNUM>: New enum values. * rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate ppr and dscr features. (ppc_process_record_op31): Record changes to PPR and DSCR. gdb/gdbserver/ChangeLog: 2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * configure.srv (ipa_ppc_linux_regobj): Add powerpc-isa205-ppr-dscr-vsx32l-ipa.o and powerpc-isa205-ppr-dscr-vsx64l-ipa.o. (powerpc*-*-linux*): Add powerpc-isa205-ppr-dscr-vsx32l.o and powerpc-isa205-ppr-dscr-vsx64l.o to srv_regobj, add rs6000/power-dscr.xml, rs6000/power-ppr.xml, rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml to srv_xmlfiles. * linux-ppc-tdesc-init.h (enum ppc_linux_tdesc) <PPC_TDESC_ISA205_PPR_DSCR_VSX>: New enum value. (init_registers_powerpc_isa205_ppr_dscr_vsx32l) (init_registers_powerpc_isa205_ppr_dscr_vsx64l): Declare. * linux-ppc-low.c: Include "elf/common.h" and <sys/uio.h>. (ppc_hwcap): Add comment. (ppc_hwcap2): New global. (ppc_check_regset, ppc_fill_pprregset, ppc_store_pprregset) (ppc_fill_dscrregset, ppc_store_dscrregset): New functions. (ppc_regsets): Add entries for the DSCR and PPR regsets. (ppc_arch_setup): Get AT_HWCAP2. Set ppr_dscr in features struct when needed. Set sizes for the the DSCR and PPR regsets. (ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA205_PPR_DSCR_VSX. (initialize_low_arch): Call init_registers_powerpc_isa205_ppr_dscr_vsx32l and init_registers_powerpc_isa205_ppr_dscr_vsx64l. * linux-ppc-ipa.c (get_ipa_tdesc): Handle PPC_TDESC_ISA205_PPR_DSCR_VSX. (initialize_low_tracepoint): Call init_registers_powerpc_isa205_ppr_dscr_vsx32l and init_registers_powerpc_isa205_ppr_dscr_vsx64l. gdb/testsuite/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * gdb.arch/powerpc-ppr-dscr.c: New file. * gdb.arch/powerpc-ppr-dscr.exp: New file. gdb/doc/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * gdb.texinfo (PowerPC Features): Describe new features "org.gnu.gdb.power.ppr" and "org.gnu.gdb.power.dscr".	2018-10-26 10:03:46 -03:00
Pedro Franco de Carvalho	5c849b222b	[PowerPC] Don't zero-initialize vector register buffers ... Now that linux-tdep.c already zero-initializes the buffer used for generating core file notes, there is no need to do this in the linux collect functions for the vector regset. The memsets in gdbserver were not useful to begin with. gdb/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * ppc-linux-tdep.c (ppc_linux_collect_vrregset): Remove. (ppc32_le_linux_vrregset, ppc32_be_linux_vrregset): Replace ppc_linux_collect_vrregset by regcache_collect_regset. gdb/gdbserver/ChangeLog: 2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * linux-ppc-low.c (ppc_fill_vrregset): Remove memset calls.	2018-10-26 09:46:02 -03:00
John Darrington	f19c7ff839	GDBSERVER: Listen on a unix domain (instead of TCP) socket if requested. ... When invoking gdbserver, if the COMM parameter takes the form "unix::/path/name" then a local (unix) domain socket will be created with that name and gdbserver will listen for connections on that. gdb/ * NEWS: Mention new feature. gdb/gdbserver/ * configure.ac (AC_CHECK_HEADERS): Add sys/un.h. * configure: Regenerate. * remote-utils.c (remote_prepare): Create a local socket if requested. (remote_open): Don't attempt to open a file if it's a socket. (handle_accept_event): Display the name of the socket on connection. gdb/common/ * netstuff.c (parse_connection_spec)[prefixes]: New member for local domain sockets.	2018-10-23 16:09:31 +02:00
Sergio Durigan Junior	8ecfd7bd4a	Add parameter to allow enabling/disabling selftests via configure ... This is a follow-up of: https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html Instead of going throttle and always enabling our selftests (even in non-development builds), this patch is a bit more conservative and introduces a configure option ("--enable-unit-tests") that allows the user to choose whether she wants unit tests in the build or not. Note that the current behaviour is retained: if no option is provided, GDB will have selftests included in a development build, and will *not* have selftests included in a non-development build. The rationale for having this option is still the same: due to the many racy testcases and random failures we see when running the GDB testsuite, it is unfortunately not possible to perform a full test when one is building a downstream package. As the Fedora GDB maintainer and one of the Debian GDB uploaders, I feel like this situation could be improved by, at least, executing our selftests after the package has been built. This patch introduces no regressions to our build. OK? gdb/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * README (`configure' options): Add documentation for new "--enable-unit-tests" option. * acinclude.m4: Include "selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * maint.c (maintenance_selftest): Update message informing that selftests have been disabled. (maintenance_info_selftests): Likewise. * selftest.m4: New file. gdb/gdbserver/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * acinclude.m4: Include "../selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * configure.srv: Use "$enable_unittests" instead of "$development" when checking whether unit tests have been enabled. * server.c (captured_main): Update message informing that selftests have been disabled. gdb/testsuite/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.gdb/unittest.exp: Update expected message informing that selftests have been disabled. * gdb.server/unittest.exp: Likewise. squash! Add parameter to allow enabling/disabling selftests via configure	2018-10-10 16:23:56 -04:00
Tom Tromey	96643e35c0	Add -Wshadow=local ... This adds -Wshadow=local to configure. gdb/ChangeLog 2018-10-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wshadow=local. gdb/gdbserver/ChangeLog 2018-10-04 Tom Tromey <tom@tromey.com> * configure: Rebuild.	2018-10-04 22:51:49 -06:00
Tom Tromey	da4ae14a4d	Avoid shadowing in gdbserver ... This fixes a few instances of shadowing in gdbserver. These are all simple fixes. gdb/gdbserver/ChangeLog 2018-10-04 Tom Tromey <tom@tromey.com> * server.c (handle_status): Rename inner "thread". (process_serial_event): Declare "res" in 'm' case. * linux-low.c (last_thread_of_process_p, find_lwp_pid) (iterate_over_lwps): Rename inner "thread". (linux_qxfer_libraries_svr4): Rename inner "len". * gdbthread.h (find_thread_in_random): Rename inner "thread".	2018-10-04 22:51:46 -06:00
Gary Benson	7c619dbdae	Move duplicated code to common/gdb_proc_service.h ... This commit moves now-identical code from gdb/gdb_proc_service.h and gdb/gdbserver/gdb_proc_service.h into the new shared file gdb/common/gdb_proc_service.h. gdb/ChangeLog: * common/gdb_proc_service.h: New file, factored out from... * gdb_proc_service.h: Moved common code to the above file. * Makefile.in (HFILES_NO_SRCDIR): Add the above new file. gdb/gdbserver/ChangeLog: * gdb_proc_service.h: Moved common code to common/gdb_proc_service.h.	2018-10-01 10:37:39 +01:00
Gary Benson	3795e81442	gdb_proc_service.h comment and whitespace synchronization ... This commit updates comments and whitespace in GDB's and gdbserver's gdb_proc_service.h. gdb/ChangeLog: * gdb_proc_service.h: Whitespace change. gdb/gdbserver/ChangeLog: * gdb_proc_service.h: Synchronize comments and whitespace with GDB's version of this file.	2018-10-01 10:37:39 +01:00
Tom Tromey	49b036f1e0	Remove dead code from gdbserver's configure ... gdbserver's configure removes -Wmissing-prototypes from the warning flags. However, this flag is only useful for C, so this deletion is no longer needed. gdb/gdbserver/ChangeLog 2018-09-25 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac (WARN_CFLAGS): Don't remove -Wmissing-prototypes.	2018-09-25 07:54:59 -06:00
Simon Marchi	8ff03f0bfb	Sort objects in gdb and gdbserver Makefiles ... Tom mentioned this a while ago, as a way to give you a cheap sense of progression in your build, as all object files will be built alphabetically (including the directory part). I tried it and I think it's nice. gdb/ChangeLog: * Makefile.in (LIBGDB_OBS): Sort COMMON_OBS. gdb/gdbserver/ChangeLog: * Makefile.in (gdbserver$(EXEEXT)): Sort OBS. (gdbreplay$(EXEEXT)): Sort GDBREPLAY_OBS. ($(IPA_LIB)): Sort IPA_OBJS.	2018-09-16 20:34:56 -04:00
Simon Marchi	a1cd91dc2f	gdbserver/Makefile.in: Remove ADD_DEPS ... ADD_DEPS is defined nowhere, so I presume it's not useful. If I'm wrong and this is actually used, there should be a comment explaining where it comes from. gdb/gdbserver/ChangeLog: * Makefile.in: Remove references to $(ADD_DEPS).	2018-09-16 20:34:56 -04:00
Tom Tromey	752312ba4e	Use GNU style for metasyntactic variables in gdbserver ... This changes a couple of places in gdbserver to use the GNU style for metasyntactic variables. gdb/gdbserver/ChangeLog 2018-09-16 Tom Tromey <tom@tromey.com> * remote-utils.c (remote_open): Use GNU style for metasyntactic variables. * gdbreplay.c (gdbreplay_usage): Use GNU style for metasyntactic variables.	2018-09-16 06:25:17 -06:00
Tom Tromey	f1628857d7	Make -Wformat-nonliteral work with gcc ... After looking into why the build failed for Simon but not for me, we found that the underlying cause was due to how gcc treats -Wformat-nonliteral. gcc requires -Wformat to be given first; but warning.m4 was not doing this, so -Wformat-nonliteral was not being used. This patch changes warning.m4 to account gcc's requirement. This then showed that the target-float.c build change in the earlier Makefile patch was also incorrect. Simon didn't see this in his build, but gcc now points it out. So, this patch fixes this problem as well. 2018-09-05 Tom Tromey <tom@tromey.com> * warning.m4 (AM_GDB_WARNINGS): Add -Wformat when testing -Wformat-nonliteral. * target-float.c (host_float_ops<T>::to_string) (host_float_ops<T>::from_string): Use DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL. * configure: Rebuild. gdb/gdbserver/ChangeLog 2018-09-05 Tom Tromey <tom@tromey.com> * configure: Rebuild.	2018-09-05 21:47:33 -06:00