This patch add supports for FEAT_SPECRES2 "Enhanced speculation
restriction instructions" adding the "cosp" instruction.
This is mandatory v8.9-a/v9.4-a and optional v8.0-a+/v9.0-a+. It is
enabled by the +predres2 march flag.
Hi,
This patch contains a reformatting of -march option section in gas documentation.
For instance (see https://sourceware.org/binutils/docs-2.41/as.html#ARM-Options),
before all the options were on one line:
For armv8-a:
+crc: Enables CRC32 Extension. +simd: Enables VFP and NEON for Armv8-A. +crypto: Enables
Cryptography Extensions for Armv8-A, implies +simd. +sb: Enables Speculation Barrier
Instruction for Armv8-A. +predres: Enables Execution and Data Prediction Restriction
Instruction for Armv8-A. +nofp: Disables all FPU, NEON and Cryptography Extensions.
+nocrypto: Disables Cryptography Extensions.
Now, the readability is improved thanks to the itemization of the options:
For armv8-a:
+crc: Enables CRC32 Extension.
+simd: Enables VFP and NEON for Armv8-A.
+crypto: Enables Cryptography Extensions for Armv8-A, implies +simd.
+sb: Enables Speculation Barrier Instruction for Armv8-A.
+predres: Enables Execution and Data Prediction Restriction Instruction for Armv8-A.
+nofp: Disables all FPU, NEON and Cryptography Extensions.
+nocrypto: Disables Cryptography Extensions.
Ok for binutils-master? I don't have commit access so I need someone to commit on my behalf.
Regards,
Matthieu.
Hi,
This patch adds support for the Cortex-X3 CPU to binutils.
Gas regression testing for aarch64-none-linux-gnu target and found no regressions.
Ok for binutils-master? I don't have commit access so I need someone to commit on my behalf.
Regards,
Matthieu.
SiFive has define as set of flexible instruction for extending vector
coprocessor, it able to encoding opcode like .insn but with predefined
format.
List of instructions:
sf.vc.x
sf.vc.i
sf.vc.vv
sf.vc.xv
sf.vc.iv
sf.vc.fv
sf.vc.vvv
sf.vc.xvv
sf.vc.ivv
sf.vc.fvv
sf.vc.vvw
sf.vc.xvw
sf.vc.ivw
sf.vc.fvw
sf.vc.v.x
sf.vc.v.i
sf.vc.v.vv
sf.vc.v.xv
sf.vc.v.iv
sf.vc.v.fv
sf.vc.v.vvv
sf.vc.v.xvv
sf.vc.v.ivv
sf.vc.v.fvv
sf.vc.v.vvw
sf.vc.v.xvw
sf.vc.v.ivw
sf.vc.v.fvw
Spec of Xsfvcp
https://www.sifive.com/document-file/sifive-vector-coprocessor-interface-vcix-software
Co-authored-by: Hau Hsu <hau.hsu@sifive.com>
Co-authored-by: Kito Cheng <kito.cheng@sifive.com>
This patch makes the BPF assembler to support double-slash line
comments, like the llvm BPF assembler does. At this point both
assemblers support the same commenting styles:
- Line comments preceded by # or //.
- Non-nestable block comments delimited by /* and */.
This patch also adds a couple of tests to make sure all the comment
styles work in both normal and pseudoc syntax. The manual is also
updated to mention double-slash line comments.
The BPF assembler in clang uses semi-colon (;) to separate statements,
not to be begin line comments. This patch adapts the GNU assembler
accordingly.
Testsuite and documentation updated accordingly.
2023-11-28 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c: Semicolon does not start a comment, but
separates multiple commands on a single line.
* testsuite/gas/bpf/alu-pseudoc.s: Adapt test accordingly.
* testsuite/gas/bpf/spacing-pseudoc.s: Likewise.
* testsuite/gas/bpf/offset16-overflow.s: Likewise.
* testsuite/gas/bpf/jump-relax-jump.s: Likewise.
* testsuite/gas/bpf/jump-relax-ja.s: Likewise.
* testsuite/gas/bpf/imm32-overflow.s: Likewise.
* testsuite/gas/bpf/disp32-overflow.s: Likewise.
* testsuite/gas/bpf/disp16-overflow-relax.s: Likewise.
* testsuite/gas/bpf/disp16-overflow.s: Likewise.
* doc/c-bpf.texi (BPF Special Characters): Update.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds the sub-extension "XTheadZvamo" for the
"XTheadVector" extension, and it provides AMO instructions
for T-Head VECTOR vendor extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add support
for "XTheadZvamo" extension.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-zvamo.d: New test.
* testsuite/gas/riscv/x-thead-vector-zvamo.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VAMOADDWV): New.
* opcode/riscv.h (enum riscv_insn_class): Add insn class.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions ([2]).
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the "XTheadVector" extension, a collection of
T-Head-specific vector instructions. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the RISC-V
toolchain conventions ([1]).
Here are some things that need to be explained:
The "XTheadVector" extension is not a custom-extension, but
a non-standard non-conforming extension. The encoding space
of the "TheadVector" instructions overlaps with those of
the 'V' extension. This encoding space conflict is not on
purpose, but the result of issues in the past that have
been resolved since. Therefore, the "XTheadVector" extension
and the 'V' extension are in conflict.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
[2] https://github.com/T-head-Semi/thead-extension-spec/releases/download/2.3.0/xthead-2023-11-10-2.3.0.pdf
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): The
"XTheadVector" extension and the 'V' extension are in conflict.
(riscv_multi_subset_supports): Likewise..
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-fail.d: New test.
* testsuite/gas/riscv/x-thead-vector-fail.l: New test.
* testsuite/gas/riscv/x-thead-vector.s: New test.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class):
2023-11-18 Jose E. Marchesi <jemarch@gnu.org>
* config/tc-bpf.c (parse_bpf_register): Move before
bpf_parse_name.
(bpf_parse_name): Do not allow using symbols that are also
register names as operands in pseudo-c syntax.
* testsuite/gas/bpf/regs-for-symbols-pseudoc.d: New file.
* testsuite/gas/bpf/regs-for-symbols-pseudoc.s: Likewise.
* testsuite/gas/bpf/regs-for-symbols-pseudoc.l: Likewise.
* doc/c-bpf.texi (BPF Registers): Document that it is not possible
to refer to register names as symbols in instruction operands.
This patch also adds support for:
1. FEAT_RASv2 feature and "ERXGSR_EL1" system register.
RASv2 feature is enabled by passing +rasv2 to -march
(eg: -march=armv8-a+rasv2).
2. FEAT_SCTLR2 and following system registers.
SCTLR2_EL1, SCTLR2_EL12, SCTLR2_EL2 and SCTLR2_EL3.
3. FEAT_FGT2 and following system registers.
HDFGRTR2_EL2, HDFGWTR2_EL2, HFGRTR2_EL2, HFGWTR2_EL2
4. FEAT_PFAR and following system registers.
PFAR_EL1, PFAR_EL2 and PFAR_EL12.
FEAT_RASv2, FEAT_SCTLR2, FEAT_FGT2 and FEAT_PFAR features are by default
enabled from Armv9.4-A architecture.
This patch also adds support for two read only system registers
id_aa64mmfr3_el1 and id_aa64mmfr4_el1, which are available from
Armv8-A Architecture.
Enable the `+lse128' feature modifier which, together with new
internal feature flags, enables LSE128 instructions, which are
represented via the new `_LSE128_INSN' macro.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_features): Add new "lse128"
entry.
include/ChangeLog:
* include/opcode/aarch64.h (enum aarch64_feature_bit): New
AARCH64_FEATURE_LSE128 feature bit.
(enum aarch64_insn_class): New lse128_atomic instruction class.
opcodes/ChangeLog:
* opcodes/aarch64-tbl.h (aarch64_feature_lse128): New.
(LSE128): Likewise.
(_LSE128_INSN): Likewise.
Add Binutils support for system registers associated with the
Translation Hardening Extension (THE).
In doing so, we also add core feature support for THE, enabling its
associated feature flag and implementing the necessary
feature-checking machinery.
Regression tested on aarch64-linux-gnu, no regressions.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_features): Add "+the" feature modifier.
* doc/c-aarch64.texi (AArch64 Extensions): Update
documentation for `the' option.
* testsuite/gas/aarch64/sysreg-8.s: Add tests for `the'
associated system registers.
* testsuite/gas/aarch64/sysreg-8.d: Likewise.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_feature_bit): Add
AARCH64_FEATURE_THE.
opcode/ChangeLog:
* aarch64-opc.c (aarch64_sys_ins_reg_supported_p): Add `the'
system register check support.
* aarch64-sys-regs.def: Add `rcwmask_el1' and `rcwsmask_el1'
* aarch64-tbl.h: Define `THE' preprocessor macro.
Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html
Contributors:
Mary Bennett <mary.bennett@embecosm.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added `xcvalu`
instruction class.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Added the necessary
operands for the extension.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Noted XCValu as an additional ISA extension
for CORE-V.
* testsuite/gas/riscv/cv-alu-boundaries.d: New test.
* testsuite/gas/riscv/cv-alu-boundaries.l: New test.
* testsuite/gas/riscv/cv-alu-boundaries.s: New test.
* testsuite/gas/riscv/cv-alu-fail-march.d: New test.
* testsuite/gas/riscv/cv-alu-fail-march.l: New test.
* testsuite/gas/riscv/cv-alu-fail-march.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.s: New test.
* testsuite/gas/riscv/cv-alu-insns.d: New test.
* testsuite/gas/riscv/cv-alu-insns.s: New test.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Disassemble xcb operand.
* riscv-opc.c: Defined the MASK and added XCValu instructions.
include/ChangeLog:
* opcode/riscv-opc.h: Added corresponding MATCH and MASK macros
for XCValu.
* opcode/riscv.h: Added corresponding EXTRACT and ENCODE macros
for XCValu.
(enum riscv_insn_class): Added the XCValu instruction class.
Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html
Contributors:
Mary Bennett <mary.bennett@embecosm.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added `xcvmac`
instruction class.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Added the necessary
operands for the extension.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Noted XCVmac as an additional ISA extension
for CORE-V.
* testsuite/gas/riscv/cv-mac-fail-march.d: New test.
* testsuite/gas/riscv/cv-mac-fail-march.l: New test.
* testsuite/gas/riscv/cv-mac-fail-march.s: New test.
* testsuite/gas/riscv/cv-mac-fail-operand.d: New test.
* testsuite/gas/riscv/cv-mac-fail-operand.l: New test.
* testsuite/gas/riscv/cv-mac-fail-operand.s: New test.
* testsuite/gas/riscv/cv-mac-insns.d: New test.
* testsuite/gas/riscv/cv-mac-insns.s: New test.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Disassemble information with
the EXTRACT macro implemented.
* riscv-opc.c: Defined the MASK and added
XCVmac instructions.
include/ChangeLog:
* opcode/riscv-opc.h: Added corresponding MATCH and MASK macros
for XCVmac.
* opcode/riscv.h: Added corresponding EXTRACT and ENCODE macros
for uimm.
(enum riscv_insn_class): Added the XCVmac instruction class.
This patch adds for Guarded Control Stack Extension (GCS) extension. GCS feature is
optional from Armv9.4-A architecture and enabled by passing +gcs option to -march
(eg: -march=armv9.4-a+gcs) or using ".arch_extension gcs" directive in the assembly file.
Also this patch adds support for GCS instructions gcspushx, gcspopcx, gcspopx,
gcsss1, gcsss2, gcspushm, gcspopm, gcsstr and gcssttr.
This patch adds support for Check Feature Status Extension (CHK) which
is mandatory from Armv8.0-A. Also this patch supports "chkfeat" instruction
(hint #40).
Since RV32E and RV64E are now ratified, this commit prepares the ABI
support for LP64E (LP64 with reduced GPRs).
gas/ChangeLog:
* config/tc-riscv.c (riscv_set_abi_by_arch): Update the error
message. (md_parse_option): Accept "lp64e".
* doc/c-riscv.texi: Update the documentation to allow "lp64e".
* testsuite/gas/riscv/mabi-fail-rv32e-lp64f.l:
Change error message.
* testsuite/gas/riscv/mabi-fail-rv32e-lp64d.l: Likewise.
* testsuite/gas/riscv/mabi-fail-rv32e-lp64q.l: Likewise.
Recognize "/<number>" suffixes on both -march=+avx10.1 and the
corresponding .arch directive, setting an upper bound on the vector size
that insns may use. Such a restriction can be reset by setting a new base
architecture, by using a suffix-less form, by disabling AVX10, or by
enabling any other VEX/EVEX-based vector extension.
While for most insns we can suppress their use with too wide operands
via registers becoming unavailable (or in Intel syntax memory operand
size specifiers not being recognized), mask register insns have to have
their minimum required vector size specified in a new attribute. (Of
course this new attribute could also be used on other insns.)
Note that .insn continues to be permitted to emit EVEX{512,256} (and
VEX256 ones) encodings regardless of vector size restrictions in place.
Of course these can't be expressed using zmm (or ymm) operands then,
but need using the EVEX.512.* forms (broadcast forms may be usable right
now, but this may go away so shouldn't be relied upon). This is why no
assertions should be added to build_{e,}vex_prefix().
Since this is merely a re-branding of certain AVX512* features, there's
little code to be added.
The main aspect here are new testcases. In order to be able to re-use
some of the existing testcases, several of them need their start symbols
adjusted. Note that 256- and 128-bit tests want adding here, as these
need to work right away. Subsequently they'll gain vector length
constraints.
Since it was missing and is wanted here, also add an AVX512VL+VPOPCNTDQ
test.
The vendor operands should be named starting with `X', and preferably the
second letter (or multiple following letters) is enough to differentiate
them from other vendors.
Therefore, added letter `t' after `X' for t-head operands, to differentiate
from future different vendor's operands.
bfd/
* elfxx-riscv.c (riscv_supported_vendor_x_ext): Removed the vendor
document link since it should already be recorded in the
gas/doc/c-riscv.texi.
gas/
* config/tc-riscv.c (validate_riscv_insn): Added `t' after `X' for
t-head operands. Minor updates for indents and comments.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Minor updates.
opcodes/
* riscv-dis.c (print_insn_args): Added `t' after `X' for t-head
operands. Minor updates for indents and comments.
* riscv-opc.c (riscv_opcode): Likewise.
While --sectname-subst is nice, it isn't enough to e.g. mimic
-f{function,data}-sections in assembly code, when such use is to be
optional (e.g. dependent upon some configuration setting).
Assign meaning to '+' and '-' as section attribute letters, allowing
to inherit the prior section's attributes (and possibly type) along
with adding or removing some. Note that documenting the interaction
with '?' as undefined is a precautionary measure.
While touching the function invocation, stop using |= on the result of
obj_elf_parse_section_letters(): "attr" is firmly zero ahead of the
call.
The neg/neg32 BPF instructions always use BPF_SRC_K (=0) in their header
source bit, despite operating on registers. If BPF_SRC_X (=1) is set,
the instructions are rejected by the kernel.
Because of this there are also no neg/neg32 instructions which operate
on immediates, so remove them.
bd434cc4d9 was a similar fix in the old
CGEN-based port, but was not carried forward in the new port.
include/
* opcode/bpf.h (enum bpf_insn_id): Remove spurious entries
BPF_INSN_NEGI and BPF_INSN_NEG32I.
opcodes/
* bpf-opc.c (bpf_opcodes): Remove erroneous NEGI and NEG32I
instructions.
gas/
* doc/c-bpf.texi (BPF Instructions): Remove erroneous neg and
neg32 instructions operating on immediates.
* testsuite/gas/bpf/alu.s: Adapt accordingly.
* testsuite/gas/bpf/alu.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise
* testsuite/gas/bpf/alu32.s: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
* testsuite/gas/bpf/alu32-be.d: Likewise.
* testsuite/gas/bpf/alu-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
This commit changes the BPF GAS port in order to handle immediate
overflows the same way than the clang BPF assembler:
- For an immediate field of N bits, any written number (positive or
negative) whose two's complement encoding fit in N its is accepted.
This means that -2 is the same than 0xffffffe. It is up to the
instructions to decide how to interpret the encoded value.
- Immediate fields in jump instructions are no longer relaxed.
Relaxing to jump instructions with wider range is only performed
when expressions are involved.
- The manual is updated to document this, and testsuite adapted
accordingly.
Tested in x86_64-linux-gnu host, bpf-unknown-none target.
gas/ChangeLog:
2023-08-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (check_immediate_overflow): New function.
(encode_insn): Use check_immediate_overflow.
(md_assemble): Do not relax instructions with
constant disp16 fields.
* doc/c-bpf.texi (BPF Instructions): Add note about how numerical
literal values are interpreted for instruction immediate operands.
* testsuite/gas/bpf/disp16-overflow.s: Adapt accordingly.
* testsuite/gas/bpf/jump-relax-jump.s: Likewise.
* testsuite/gas/bpf/jump-relax-jump.d: Likewise.
* testsuite/gas/bpf/jump-relax-jump-be.d: Likewise.
* testsuite/gas/bpf/jump-relax-ja.s: Likewise.
* testsuite/gas/bpf/jump-relax-ja.d: Likewise.
* testsuite/gas/bpf/jump-relax-ja-be.d: Likewise.
* testsuite/gas/bpf/disp16-overflow-relax.l: Likewise.
* testsuite/gas/bpf/imm32-overflow.s: Likewise.
* testsuite/gas/bpf/disp32-overflow.s: Likewise.
* testsuite/gas/bpf/disp16-overflow.l: Likewise.
* testsuite/gas/bpf/disp32-overflow.l: Likewise.
* testsuite/gas/bpf/imm32-overflow.l: Likewise.
* testsuite/gas/bpf/offset16-overflow.l: Likewise.
This patch adds support for the Cortex-A720 CPU to binutils.
bfd/ChangeLog:
* cpu-aarch64.c: Add Cortex-A720.
gas/ChangeLog:
* NEWS: Update docs.
* config/tc-aarch64.c: Add Cortex-A720.
* doc/c-aarch64.texi: Update docs.
* testsuite/gas/aarch64/cpu-cortex-a720.d: New test.
This patch adds support for the Cortex-A520 CPU to gas.
No regressions on aarch64-none-elf.
gas/ChangeLog:
* NEWS: Update docs.
* config/tc-aarch64.c: Add Cortex-A520.
* doc/c-aarch64.texi: Update docs.
PR 28909
Sadly "cp -p", doing more than just preserving the time stamp, can fail
e.g. upon trying to preserve ownership (which we don't care about), as
can be observed on e.g. Cygwin. Replace the use of -p by a use of touch,
this way also only preserving modification time.
The BPF jump-always instruction (JA), like all other jump instructions
in the ISA, get a signed 16-bit displacement target argument denoted
in number of 64-bit words minus one. This can sometimes be overflown.
The BPF V4 ISA thus introduced support for a jump-always
instruction (JAL) that gets a signed 32-bit displacement instead.
This patch makes the BPF assembler to perform the following
relaxations when the disp16 field gets overflown, unless the option
-mno-relax is specified:
JA disp16 -> JAL disp32
Jxx disp16 -> Jxx +1; JA +1; JAL disp32
Documentation and tests added.
Tested in bpf-unknown-none.
gas/ChangeLog:
2023-07-28 Jose E. Marchesi <jose.marchesi@oracle.com>
PR gas/30690
* config/tc-bpf.c (struct bpf_insn): Add fields is_relaxable and
relaxed_exp.
(enum options): Add OPTION_NO_RELAX.
(md_longopts): Likewise for -mno-relax.
(do_relax): New global.
(md_parse_option): Handle OPTION_NO_RELAX.
(RELAX_BRANCH_ENCODE): Define.
(RELAX_BRANCH_P): Likewise.
(RELAX_BRANCH_LENGTH): Likewise.
(RELAX_BRANCH_CONST): Likewise.
(RELAX_BRANCH_UNCOND): Likewise.
(relaxed_branch_length): New function.
(md_estimate_size_before_relax): Likewise.
(read_insn_word): Likewise.
(encode_int16): Likewise.
(encode_int32): Likewise.
(write_insn_bytes): Likewise.
(md_convert_frag): Likewise.
(encode_insn): Likewise.
(install_insn_fixups): Likewise.
(add_fixed_insn): Likewise.
(add_relaxed_insn): Likewise.
(md_assemble): Move instruction encoding logic to the above
new functions.
* testsuite/gas/bpf/jump-relax-ja.d: New test.
* testsuite/gas/bpf/jump-relax-ja-be.d: Likewise.
* testsuite/gas/bpf/jump-relax-ja.s: And corresponding source.
* testsuite/gas/bpf/jump-relax-jump.d: New test.
* testsuite/gas/bpf/jump-relax-jump-be.d: Likewise.
* testsuite/gas/bpf/jump-relax-jump.s: And corresponding source.
* testsuite/gas/bpf/bpf.exp: Run new tests.
* doc/c-bpf.texi (BPF Options): Document -mno-relax.
This little patch makes the BPF assembler accept '#' as an inline
comment character, which clang -S seems to use.
gas/
* config/tc-bpf.c (comment_chars): Add '#'.
* doc/c-bpf.texi (BPF Special Characters): Add note that '#' may
be used for inline comments.
This patch fixes the BPF_INSN_NEGR and BPF_INSN_NEG32R BPF
instructions to not use their source registers.
Tested in bpf-unknown-none.
opcodes/ChangeLog:
2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Fix BPF_INSN_NEGR to not use a src
register.
gas/ChangeLog:
2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.s: The register neg instruction gets only
one argument.
* testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu.d: Likewise.
* testsuite/gas/bpf/alu32-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
* testsuite/gas/bpf/alu32.s: Likewise.
* doc/c-bpf.texi (BPF Instructions): Update accordingly.
This patch adds support for the BPF V4 ISA byte swap instructions to
opcodes, assembler and disassembler.
Tested in bpf-unknown-none.
include/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/bpf.h (BPF_IMM32_BSWAP16): Define.
(BPF_IMM32_BSWAP32): Likewise.
(BPF_IMM32_BSWAP64): Likewise.
(enum bpf_insn_id): New entries BPF_INSN_BSWAP{16,32,64}.
opcodes/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Add entries for the BSWAP*
instructions.
gas/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-bpf.texi (BPF Instructions): Document BSWAP* instructions.
* testsuite/gas/bpf/alu.s: Test BSWAP{16,32,64} instructions.
* testsuite/gas/bpf/alu.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
gas/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-bpf.texi (BPF Instructions): The pseudoc syntax for MOVS*
doesn't use `s=' but `='.
This patch fixes the pseudoc syntax of the V4 instructions MOVS* and
LDXS* in order to reflect https://reviews.llvm.org/D144829.
opcodes/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Fix pseudo-c syntax for MOVS* and LDXS*
instructions.
gas/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-bpf.texi (BPF Instructions): Fix pseudoc syntax for MOVS*
and LDXS* instructions.
* testsuite/gas/bpf/mem-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
