Microsoft's DIA library, and thus also MSVC and WinDbg, expects section
contributions to be ordered by section number and offset, otherwise it's
unable to resolve line numbers.
On DOS systems, absolute paths start with the drive letter. This can
trigger failures in the regexp from dump tests, especially for those
checking for warnings or errors. They are usually skipping everything
before the first ":" as it has to be the file path.
| [^:]*: warning: ...
In order to avoid modifying many regexps to allow such drive letters,
prune them from all the outputs if they are found at the beginning of
a line.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp (prune_dump_output): New
(run_dump_test): Use it.
ld/ChangeLog:
* testsuite/ld-elf/noinit-sections-2.l: Remove DOS drive letter
handler.
The segfault was a symptom of messing with the absolute section next
field, confusing bfd_section_removed_from_list in linker.c:fix_syms.
That's not all that was going wrong. The INSERT list of output
sections was being inserted into itself, ie. lost from the main
list of linker statements.
PR 30155
* ldlang.c (process_insert_statements): Handle pathological
case of the insert script being inserted before the first
output section statement in the default script.
(output_prev_sec_find): Don't test section owner here.
(insert_os_after): Change parameter to a list union pointer.
(lang_insert_orphan): Test section owner here and adjust
insert_os_after call.
--relax enables all relaxations. --no-relax-gp disables GP relaxation to
allow measuring its effect.
The option can test effectiveness of GP relaxation and support some ABI
variants that use GP for other purposes.
Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/issues/298
bfd/
* elfnn-riscv.c (struct riscv_elf_link_hash_table): Add params.
(riscv_elfNN_set_options): New.
(riscv_info_to_howto_rela): Check relax_gp.
(_bfd_riscv_relax_section): Likewise.
* elfxx-riscv.h (struct riscv_elf_params): New.
(riscv_elf32_set_options): New.
(riscv_elf64_set_options): New.
ld/
* emultempl/riscvelf.em: Add option parsing.
* testsuite/ld-riscv-elf/code-model-relax-medlow-01-norelaxgp.d: New.
* testsuite/ld-riscv-elf/pcgp-relax-01-norelaxgp.d: New.
* testsuite/ld-riscv-elf/pcgp-relax-02.d: Test --relax --relax-gp can be
used together.
Mingw doesn't have /dev/null and thus "-o /dev/null" will fail.
Currently, all the options are checked using this "-o /dev/null",
resulting in them being disabled on mingw hosts.
Fix that by outputting to a real file for all targets.
ld/ChangeLog:
* testsuite/config/default.exp: Replace "-o /dev/null" by a
file.
For this:
./ld-new: cannot find -limagelib: No such file or directory
./ld-new: cannot find -lstarlet: No such file or directory
./ld-new: cannot find -lsys$public_vectors: No such file or directory
the logs showed
creating dummy tmpdir/libimagelib:
creating dummy No
creating dummy such
etc.
So rubbish instead of tmpdir/libimagelib.a and the other required libs.
* testsuite/config/default.exp: Correct regex detecting missing
libraries automatically searched by alpha-dec-vms-ld.
The regexp in "noinit sections (ld -r)" is skipping the file path before
the first ":". However, on Windows, a path can start with "C:". Adjust
the regexp to allow such cases.
ld/ChangeLog:
* testsuite/ld-elf/noinit-sections-2.l: Allow Windows paths
(starting with C:).
In some tests, the path reported on Windows will have a \ instead of a
/. This occurs when a file is concatened with the search path in
ldfile.c.: "ld -Ltmpdir -ltext" will result into "tmpdir\libtext.a".
ld/ChangeLog:
* testsuite/ld-elf/retain5.map: Allow \ path separator.
* testsuite/ld-plugin/plugin-10.d: Likewise.
* testsuite/ld-plugin/plugin-11.d: Likewise.
* testsuite/ld-plugin/plugin-18.d: Likewise.
* testsuite/ld-plugin/plugin-19.d: Likewise.
* testsuite/ld-plugin/plugin-20.d: Likewise.
* testsuite/ld-plugin/plugin-22.d: Likewise.
Fix these fails:
alpha-dec-vms +FAIL: ld-scripts/asciz
alpha-dec-vms +FAIL: ld-scripts/ascii
i386-go32 +FAIL: ld-scripts/asciz
sh-coff +FAIL: ld-scripts/asciz
It's better to positively select targets for .section support than to
try to exclude all targets that don't. Make a new is_coff_format so
we can easily select such.
binutils/
* testsuite/lib/binutils-common.exp (is_coff_format): New.
ld/
* testsuite/ld-scripts/ascii.d: Use is_elf_format and
is_coff_format to select targets, exclude ti coff.
* testsuite/ld-scripts/asciz.d: Likewise. Accept trailing zeros.
* ldlex.l: Add ASCII token.
* ldgram.y: Add parsing of the ASCII command.
* ldlang.c (lang_add_string): Add maximum size parameter. Move escape character handling code into separate function.
* ldlang.h (lang_add_string): Update prototype.
* NEWS: Mention the new feature.
* ld.texi (Output Section Data): Document the new directives.
* testsuite/ld-scripts/asciz.t: Adjust to work on more architectures and to test more aspects of the ASCIZ directive.
* testsuite/ld-scripts/asciz.d: Adjust to match the changes to the test linker script.
* testsuite/ld-scripts/ascii.d: New test driver.
* testsuite/ld-scripts/ascii.s: New test assembler source.
* testsuite/ld-scripts/ascii.t: New test script.
* testsuite/ld-scripts/script.exp: Run the new test.
I don't see much point in cluttering the source with the PROGRESS
macros, which of course do nothing at all with the definitions in
progress.h. progress.h is unchanged apart from the copyright comment
since commit d4d4c53c68 in 1994.
binutils/
* ar.c: Don't include progress.h, or invoke PROGRESS macros.
* nm.c: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
gas/
* as.h: Don't include progress.h.
* as.c: Don't invoke PROGRESS macros.
* write.c: Likewise.
include/
* progress.h: Delete.
ld/
* ldmain.c: Don't include progress.h, or invoke PROGRESS macros.
PR 30078 * testsuite/ld-elf/merge4b.s: Use .asciz instead of .string in order to avoid the special behaviour of the .string directive on HPPA architectures.
the early-out in wild_sort is not enough, it might still be
that filenames are equal _and_ the wildcard list doesn't specify
a sort order either. Don't call compare_section then.
Tested on all targets.
There is some inconsistency between the behaviour of objdump -D and
objdump -s, both supposedly operating on all sections by default.
objdump -s ignores bss sections, while objdump -D dissassembles the
zeros. Fix this by making objdump -D ignore bss sections too.
Furthermore, "objdump -s -j .bss" doesn't dump .bss as it should,
since the user is specifically asking to look at all those zeros.
This change does find some tests that used objdump -D with expected
output in bss-style sections. I've updated all the msp430 tests that
just wanted to find a non-empty section to look at section headers
instead, making the tests slightly more stringent. The ppc xcoff and
spu tests are fixed by adding -j options to objdump, which makes the
tests somewhat more lenient.
binutils/
* objdump.c (disassemble_section): Ignore sections without
contents, unless overridden by -j.
(dump_section): Allow -j to override the default of not
displaying sections without contents.
* doc/binutils.texi (objdump options): Update -D, -s and -j
description.
gas/
* testsuite/gas/ppc/xcoff-tls-32.d: Select wanted objdump
sections with -j.
* testsuite/gas/ppc/xcoff-tls-64.d: Likewise.
ld/
* testsuite/ld-msp430-elf/main-bss-lower.d,
* testsuite/ld-msp430-elf/main-bss-upper.d,
* testsuite/ld-msp430-elf/main-const-lower.d,
* testsuite/ld-msp430-elf/main-const-upper.d,
* testsuite/ld-msp430-elf/main-text-lower.d,
* testsuite/ld-msp430-elf/main-text-upper.d,
* testsuite/ld-msp430-elf/main-var-lower.d,
* testsuite/ld-msp430-elf/main-var-upper.d: Expect -wh output.
* testsuite/ld-msp430-elf/msp430-elf.exp: Use objdump -wh
rather than objdump -D or objdump -d with tests checking for
non-empty given sections.
* testsuite/ld-spu/ear.d,
* testsuite/ld-spu/icache1.d,
* testsuite/ld-spu/ovl.d,
* testsuite/ld-spu/ovl2.d: Select wanted objdump sections.
Commit 43025f01a0 ("RISC-V: Improve link time complexity.") reduced the
time complexity of the linker relaxation but some code portions did not
reflect this change.
This commit fixes a comment describing each relaxation pass and reduces
actual number of passes for the RISC-V linker relaxation from 3 to 2.
Though it does not change the functionality, it marginally improves the
performance while linking large programs (with many relocations).
bfd/ChangeLog:
* elfnn-riscv.c (_bfd_riscv_relax_section): Fix a comment to
reflect current roles of each relaxation pass.
ld/ChangeLog:
* emultempl/riscvelf.em: Reduce the number of linker relaxation
passes from 3 to 2.
When using a bss-plt we'll always trigger the RWX warning, which
disturbs gcc test results. On the other hand, there may be reason to
want the warning when gcc is configured with --enable-secureplt.
So turning off the warning entirely for powerpc might not be the best
solution. Instead, we'll turn off the warning whenever a bss-plt is
generated, unless the user explicitly asked for the warning.
bfd/
* elf32-ppc.c (ppc_elf_select_plt_layout): Set
no_warn_rwx_segments on generating a bss plt, unless explicity
enabled by the user. Also show the bss-plt warning when
--warn-rwx-segments is given without --bss-plt.
include/
* bfdlink.h (struct bfd_link_info): Add user_warn_rwx_segments.
ld/
* lexsup.c (parse_args): Set user_warn_rwx_segments.
* testsuite/ld-elf/elf.exp: Pass --secure-plt for powerpc to
the rwx tests.
The Texas Instruments SoCs with AARCH64 host processors have stricter
alignment requirements than ones with ARM32 host processors. It's not
only the requirement for resource_table to be aligned to 8. But also
any loadable segment size must be a multiple of 4 [1].
The current PRU default linker script may output a segment size not
aligned to 4, which would cause firmware load failure on AARCH64 hosts.
Fix this by using COMMONPAGESIZE and MAXPAGESIZE to signify respectively
the section memory size requirement and the resource table section's
start address alignment. This would avoid penalizing the ARM32 hosts,
for which the default values (1 and 1) are sufficient.
For AARCH64 hosts, the alignments would be overwritten from GCC spec
files using the linker command line, e.g.:
-z common-page-size=4 -z max-page-size=8
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/pru_rproc.c?h=v6.1#n555
ld/ChangeLog:
* scripttempl/pru.sc (_data_end): Remove the alignment.
(.data): Align output section size to COMMONPAGESIZE.
(.resource_table): Ditto.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
The popular method to load PRU firmware is through the remoteproc Linux
kernel driver. In order to save a few bytes from the firmware, the PRU
CRT0 is spared from calling memset for the bss segment [1]. Instead the
host loader is supposed to zero out the bss segment. This is important
for PRU, which typically has only 8KB for instruction memory.
The legacy non-mainline PRU host driver relied on the default
behaviour of the kernel core remoteproc [2]. That default is to zero
out the loadable memory regions not backed by file storage (i.e. the
bss sections). This worked for the libgloss' CRT0.
But the PRU loader merged in mainline Linux explicitly changes the
default behaviour [3]. It no longer is zeroing out memory regions.
Hence the bss sections are not initialized - neither by CRT0, nor by the
host loader.
This patch fixes the issue by aligning the GNU LD default linker script
with the mainline Linux kernel expectation. Since the mainline kernel
driver is submitted by the PRU manufacturer itself (Text Instruments),
we can consider that as defining the ABI.
This change has been tested on Beaglebone AI-64 [4]. Static counter
variables in the firmware are now always starting from zero, as
expected. There was only one new toolchain test failure in orphan3.d,
due to reordering of the output sections. I believe this is a harmless
issue. I could not rewrite the PASS criteria to ignore the output
section ordering, so I have disabled that test case for PRU.
[1] https://sourceware.org/git/?p=newlib-cygwin.git;a=blob;f=libgloss/pru/crt0.S;h=b3f0d53a93acc372f461007553e7688ca77753c9;hb=HEAD#l40
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/remoteproc_elf_loader.c?h=v6.1#n228
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/pru_rproc.c?h=v6.1#n641
[4] https://beagleboard.org/ai-64
ld/ChangeLog:
* scripttempl/pru.sc (.data): Merge .bss input sections into the
.data output section.
* testsuite/ld-elf/orphan3.d: Disable for PRU.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
The merge test fais on numerous targets because they don't support the
necessary pc-relative relocs. This patch removes that part of the
merge test, and makes references to the merged strings from .data
rather than .text to better support targets that relax text by
default.
Revert 1c66b8a039 and instead fix the broken list pointer.
PR 29998
* pe-dll.c (build_filler_bfd): Revert last change.
* ldlang.c (lang_process): When rescanning archives for lto,
fix file_chain.tail pointer if the insert point happens to be
at the end of the list.
This adjusts the testsuite to get rid of a number of XPASSes that have
appeared. Someone might like to look into a better patch for the s390
change.
aarch64-pe XPASS: weak symbols
arm-nacl XPASS: rgn-over8
mcore-pe XPASS: ld-scripts/provide-8
mips64-linux-gnuabi64 XPASS: vers4
mips64-linux-gnuabi64 XPASS: vers4b
mips-linux-gnu XPASS: vers4
mips-linux-gnu XPASS: vers4b
s390-linux-gnu XPASS: undefined line
sh4-linux-gnu XPASS: --gc-sections with __start_SECTIONNAME
sh-coff XPASS: objcopy object (simple copy)
sh-coff XPASS: objcopy executable (pr25662)
binutils/
* testsuite/binutils-all/objcopy.exp: Don't xfail "simple
copy" and "pr25662" on sh-*-coff. Remove all non-ELF xfails
on "ELF unknown section type" test.
ld/
* testsuite/ld-elfvers/vers.exp (vers4, vers4b): Don't xfail
all mips, just xfail mips irix.
* testsuite/ld-gc/pr19161.d: Don't xfail sh.
* testsuite/ld-scripts/rgn-over8-ok.d: Don't xfail nacl.
* testsuite/ld-scripts/weak.exp: Don't xfail aarch64-pe.
* testsuite/ld-undefined/undefined.exp: Conditionally xfail
"undefined line" depending on gcc version for s390.
This is similar to "Call bfd_close_all_done in output_file_close",
but with some code tidying in the pe/pep write_build_id functions.
write_build_id is passed the output bfd as its parameter, so there is
no need to go looking for the output bfd via link_info (and doing so
will no longer work since I clear link_info.output_bfd before calling
bfd_close).
* emultempl/pe.em (write_build_id): Rename t to td. Formatting.
Don't access pe_data(link_info.output_bfd), use td instead.
(setup_build_id): Rename t to td. Formatting.
* emultempl/pep.em: As for pe.em.
* ldmain.c (ld_cleanup): Call bfd_close_all_done on linker bfds.
(main): Clear link_info.output_bfd when closing.
This extends PDB support to the aarch64 PE targets.
The changes to the test files are just to make it so they can be assembled as
either x86, x86_64, or aarch64, mainly by changing the comment style.
The only actual code change here is in adding the architecture constants
to pdb.c.
Pass -Wl,--no-as-needed to linker tests to fix
FAIL: Run pr19031
FAIL: Run got1
FAIL: Undefined weak symbol (-fPIE -no-pie)
FAIL: Undefined weak symbol (-fPIE -pie)
when --as-needed is passed to linker by compiler.
PR ld/30050
* testsuite/ld-i386/i386.exp: Pass -Wl,--no-as-needed to compiler
as needed.
ld PR 29998
* pe-dll.c (generate_reloc): Handle sections
with no assigned output section.
Terminate early of there are no relocs to put
in the .reloc section.
(pe_exe_fill_sections): Do not emit an empty
.reloc section.
bfd * cofflink.c (_bfd_coff_generic_relocate_section):
Add an assertion that the output section is set
for defined, global symbols.
This fixes the test failures introduced by 87a5cf5c, by changing the
default subsystem for arm-pe from 9 (IMAGE_SUBSYSTEM_WINDOWS_CE_GUI) to
2 (IMAGE_SUBSYSTEM_WINDOWS_GUI), which matches what happens with other
PE targets.
As far as I can tell there's no working modern Windows CE toolchain
knocking about anyway, so this change shouldn't inconvenience anyone.
This patch adds support for the .secidx directive and its corresponding
relocation to aarch64-w64-mingw32. As with x86, this is a two-byte LE
integer which gets filled in with the 1-based index of the output
section that a symbol ends up in.
This is needed for PDBs, which represent addresses as a .secrel32,
.secidx pair.
The test is substantially the same as for amd64, but with changes made
for padding and alignment.
to check a situation that once failed with the new section merging
when it mishandled offsets pointing into alignment padding in mergable
string sections (i.e. pointing to zeros). It made bootstrap.exp fail
but that depends on many factors to actually go wrong so this is a more
explicit variant of it.
the test expects a second, but useless, $d mapping symbol for
the partially merged section, and specifically disallows one
for the completely merged section. The new merging algorithm
makes it so that also the partially merged sections are conceptually
SEC_EXCLUDED, except the first merge section (e.g. as if the very
first object file already contains all strings). So that second mapping
symbol is now missing. It never was needed anyway.
So, adjust the test.
"foo" is at 0x2010. This corrects the expected output for .long and
.word referencing foo, showing a problem with relocation handling.
* testsuite/ld-pe/aarch64.d: Correct expected output.
Many tests reflect a setting of ELF_MAXPAGESIZE to 64 KiB.
With ELF_MAXPAGESIZE changed to 4 KiB, layout is sometimes
different and symbols end up in other places. Avoid churn
and regexpification of old test patterns by passing the
max-page-size setting active at the time.
ld/testsuite:
* testsuite/ld-arm/arm-elf.exp,
testsuite/ld-arm/non-contiguous-arm2.d,
testsuite/ld-arm/non-contiguous-arm3.d,
testsuite/ld-arm/non-contiguous-arm5.d,
testsuite/ld-arm/non-contiguous-arm6.d,
testsuite/ld-arm/thumb-plt-got.d, testsuite/ld-arm/thumb-plt.d:
Pass -z max-page-size=0x10000 explicitly to test that rely on
that value in output-matching patterns.
We already use C99's __func__ in places, use it more generally. This
patch doesn't change uses in the testsuite. I've also left one in
gold.h that is protected by GCC_VERSION < 4003. If any of the
remaining uses bothers anyone I invite patches.
bfd/
* bfd-in.h: Replace __FUNCTION__ with __func__.
* elf32-bfin.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfxx-sparc.c: Likewise.
* bfd-in2.h: Regenerate.
gas/
* config/tc-cris.c: Replace __FUNCTION__ with __func__.
* config/tc-m68hc11.c: Likewise.
* config/tc-msp430.c: Likewise.
gold/
* dwp.h: Replace __FUNCTION__ with __func__.
* gold.h: Likewise, except for use inside GCC_VERSION < 4003.
ld/
* emultempl/pe.em: Replace __FUNCTION__ with __func__.
* emultempl/pep.em: Likewise.
* pe-dll.c: Likewise.
This adds a mingw target for aarch64, including windres and dlltool.
Note that the old value of jmp_aarch64_bytes was wrong, and this does
the same thing as MSVC does.
