This is for consistency and to prevent possible unnecessary errors due
to this inconsistency.
include/ChangeLog:
* opcode/riscv-opc.h (DECLARE_INSN): Remove semicolons from the
end of each entry.
This commit adds now stable and approved 'Smcntrpmf' extension defined by
the RISC-V Cycle and Instret Privilege Mode Filtering specification.
Note that, because mcyclecfg and minstretcfg CSRs conflict with the
privileged specification version 1.9.1, CSRs for this extension are only
enabled on the privileged specification version 1.10 or later.
By checking the base privileged specification, we no longer need to change
the design of base CSR handling.
This is based on the specification version v1.0_rc1 (Frozen):
<32b752c40d>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Add implication rule from
the new 'Smcntrpmf' extension. (riscv_supported_std_s_ext): Add
'Smcntrpmf' to the supported S extension list.
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Add new CSR classes
CSR_CLASS_SMCNTRPMF and CSR_CLASS_SMCNTRPMF_32.
(riscv_csr_address): Add handling for new CSR classes.
* testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs. Move
"mscounteren" and "mhcounteren" CSRs and note that they are now
aliases.
* testsuite/gas/riscv/csr-dw-regnums.d: Reflect the change.
* testsuite/gas/riscv/csr.s: Add new CSRs. Move "mscounteren"
and "mhcounteren" CSRs and note that they are now reused for
the 'Smcntrpmf' extension.
* testsuite/gas/riscv/csr-version-1p9p1.d: Reflect the changes of
csr.s.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Likewise.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h: Add new CSRs noting that this extension is
incompatible with the privileged specification version 1.9.1.
Move "mscounteren" and "mhcounteren" CSRs, make them aliases and
reuse the CSR numbers from the 'Smcntrpmf' extension.
(CSR_MSCOUNTEREN, CSR_MHCOUNTEREN) Remove as "mscounteren" and
"mhcounteren" are now aliases and new CSR macros are used instead.
(CSR_MCYCLECFG, CSR_MINSTRETCFG, CSR_MCYCLECFGH, CSR_MINSTRETCFGH):
New CSR macros.
This commit adds 'Zihintntl' extension and its hint instructions.
This is based on:
<0dc91f505e>,
the first ISA Manual noting that the 'Zihintntl' extension is ratified.
Note that compressed 'Zihintntl' hints require either 'C' or
'Zca' extension.
Co-authored-by: Nelson Chu <nelson@rivosinc.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_supported_std_z_ext): Add 'Zihintntl'
standard hint 'Z' extension.
(riscv_multi_subset_supports): Support new instruction classes.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zihintntl.s: New test for 'Zihintntl'
including auto-compression without C prefix and explicit C prefix.
* testsuite/gas/riscv/zihintntl.d: Likewise.
* testsuite/gas/riscv/zihintntl-na.d: Likewise.
* testsuite/gas/riscv/zihintntl-base.s: New test for correspondence
between 'Zihintntl' and base 'I' or 'C' instructions.
* testsuite/gas/riscv/zihintntl-base.d: Likewise.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): Add new instruction
classes: INSN_CLASS_ZIHINTNTL and INSN_CLASS_ZIHINTNTL_AND_C.
(MASK_NTL_P1, MATCH_NTL_P1, MASK_NTL_PALL,
MATCH_NTL_PALL, MASK_NTL_S1, MATCH_NTL_S1, MASK_NTL_ALL,
MATCH_NTL_ALL, MASK_C_NTL_P1, MATCH_C_NTL_P1, MASK_C_NTL_PALL,
MATCH_C_NTL_PALL, MASK_C_NTL_S1, MATCH_C_NTL_S1, MASK_C_NTL_ALL,
MATCH_C_NTL_ALL): New.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Add instructions from the
'Zihintntl' extension.
This patch support Zcb extension, contains new compressed instructions,
some instructions depend on other existed extension, like 'zba', 'zbb'
and 'zmmul'. Zcb also imply Zca extension to enable the compressing
features.
Co-Authored by: Charlie Keaney <charlie.keaney@embecosm.com>
Co-Authored by: Mary Bennett <mary.bennett@embecosm.com>
Co-Authored by: Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Co-Authored by: Sinan Lin <sinan.lin@linux.alibaba.com>
Co-Authored by: Simon Cook <simon.cook@embecosm.com>
Co-Authored by: Shihua Liao <shihua@iscas.ac.cn>
Co-Authored by: Yulong Shi <yulong@iscas.ac.cn>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): New extension.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): New operators.
(riscv_ip): Ditto.
* testsuite/gas/riscv/zcb.d: New test.
* testsuite/gas/riscv/zcb.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_C_LBU): New opcode.
(MASK_C_LBU): New mask.
(MATCH_C_LHU): New opcode.
(MASK_C_LHU): New mask.
(MATCH_C_LH): New opcode.
(MASK_C_LH): New mask.
(MATCH_C_SB): New opcode.
(MASK_C_SB): New mask.
(MATCH_C_SH): New opcode.
(MASK_C_SH): New mask.
(MATCH_C_ZEXT_B): New opcode.
(MASK_C_ZEXT_B): New mask.
(MATCH_C_SEXT_B): New opcode.
(MASK_C_SEXT_B): New mask.
(MATCH_C_ZEXT_H): New opcode.
(MASK_C_ZEXT_H): New mask.
(MATCH_C_SEXT_H): New opcode.
(MASK_C_SEXT_H): New mask.
(MATCH_C_ZEXT_W): New opcode.
(MASK_C_ZEXT_W): New mask.
(MATCH_C_NOT): New opcode.
(MASK_C_NOT): New mask.
(MATCH_C_MUL): New opcode.
(MASK_C_MUL): New mask.
(DECLARE_INSN): New opcode.
* opcode/riscv.h (EXTRACT_ZCB_BYTE_UIMM): New inline func.
(EXTRACT_ZCB_HALFWORD_UIMM): Ditto.
(ENCODE_ZCB_BYTE_UIMM): Ditto.
(ENCODE_ZCB_HALFWORD_UIMM): Ditto.
(VALID_ZCB_BYTE_UIMM): Ditto.
(VALID_ZCB_HALFWORD_UIMM): Ditto.
(enum riscv_insn_class): New extension class.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): New operators.
* riscv-opc.c: New instructions.
Zvksh is part of the vector crypto extensions.
This extension adds the following instructions:
- vsm3me.vv
- vsm3c.vi
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvksh.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvksh.d: New test.
* testsuite/gas/riscv/zvksh.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSM3C_VI): New.
(MASK_VSM3C_VI): New.
(MATCH_VSM3ME_VV): New.
(MASK_VSM3ME_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvksh.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvksh instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvksed is part of the vector crypto extensions.
This extension adds the following instructions:
- vsm4k.vi
- vsm4r.[vv,vs]
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvksed.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvksed.d: New test.
* testsuite/gas/riscv/zvksed.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSM4K_VI): New.
(MASK_VSM4K_VI): New.
(MATCH_VSM4R_VS): New.
(MASK_VSM4R_VS): New.
(MATCH_VSM4R_VV): New.
(MASK_VSM4R_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvksed.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvksed instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvknh[a,b] are parts of the vector crypto extensions.
This extension adds the following instructions:
- vsha2ms.vv
- vsha2c[hl].vv
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvknh[a,b].
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvknha.d: New test.
* testsuite/gas/riscv/zvknha_zvknhb.s: New test.
* testsuite/gas/riscv/zvknhb.d: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSHA2CH_VV): New.
(MASK_VSHA2CH_VV): New.
(MATCH_VSHA2CL_VV): New.
(MASK_VSHA2CL_VV): New.
(MATCH_VSHA2MS_VV): New.
(MASK_VSHA2MS_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvknh[a,b].
opcodes/ChangeLog:
* riscv-opc.c: Add Zvknh[a,b] instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvkg is part of the vector crypto extensions.
This extension adds the following instructions:
- vghsh.vv
- vgmul.vv
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvkg.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvkg.d: New test.
* testsuite/gas/riscv/zvkg.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VGHSH_VV): New.
(MASK_VGHSH_VV): New.
(MATCH_VGMUL_VV): New.
(MASK_VGMUL_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvkg.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvkg instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch adds support for the RISC-V Zfa extension,
which introduces additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of FP registers in case XLEN < FLEN
* fleq/fltq (quiet comparison instructions)
Zfa defines its instructions in combination with the following
extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
This patch is based on an earlier version from Tsukasa OI:
https://sourceware.org/pipermail/binutils/2022-September/122939.html
Most significant change to that commit is the switch from the rs1-field
value to the actual floating-point value in the last operand of the fli*
instructions. Everything that strtof() can parse is accepted and
the '%a' printf specifier is used to output hex floating-point literals
in the disassembly.
The Zfa specification is frozen (and has passed public review). It is
available as a chapter in "The RISC-V Instruction Set Manual: Volume 1":
https://github.com/riscv/riscv-isa-manual/releases
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for 'Zfa' extension.
(riscv_multi_subset_supports_ext): Likewise.
(riscv_implicit_subsets): Add 'Zfa' -> 'F' dependency.
gas/ChangeLog:
* config/tc-riscv.c (flt_lookup): New helper to lookup a float value
in an array.
(validate_riscv_insn): Add 'Wfv' as new format string directive.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Add floating-point chapter and describe
limiations of the Zfa FP literal parsing.
* testsuite/gas/riscv/zfa-32.d: New test.
* testsuite/gas/riscv/zfa-32.s: New test.
* testsuite/gas/riscv/zfa-64.d: New test.
* testsuite/gas/riscv/zfa-64.s: New test.
* testsuite/gas/riscv/zfa-fail.d: New test.
* testsuite/gas/riscv/zfa-fail.l: New test.
* testsuite/gas/riscv/zfa-fail.s: New test.
* testsuite/gas/riscv/zfa.d: New test.
* testsuite/gas/riscv/zfa.s: New test.
* testsuite/gas/riscv/zfa.s: New test.
* opcode/riscv-opc.h (MATCH_FLI_H): New.
(MASK_FLI_H): New.
(MATCH_FMINM_H): New.
(MASK_FMINM_H): New.
(MATCH_FMAXM_H): New.
(MASK_FMAXM_H): New.
(MATCH_FROUND_H): New.
(MASK_FROUND_H): New.
(MATCH_FROUNDNX_H): New.
(MASK_FROUNDNX_H): New.
(MATCH_FLTQ_H): New.
(MASK_FLTQ_H): New.
(MATCH_FLEQ_H): New.
(MASK_FLEQ_H): New.
(MATCH_FLI_S): New.
(MASK_FLI_S): New.
(MATCH_FMINM_S): New.
(MASK_FMINM_S): New.
(MATCH_FMAXM_S): New.
(MASK_FMAXM_S): New.
(MATCH_FROUND_S): New.
(MASK_FROUND_S): New.
(MATCH_FROUNDNX_S): New.
(MASK_FROUNDNX_S): New.
(MATCH_FLTQ_S): New.
(MASK_FLTQ_S): New.
(MATCH_FLEQ_S): New.
(MASK_FLEQ_S): New.
(MATCH_FLI_D): New.
(MASK_FLI_D): New.
(MATCH_FMINM_D): New.
(MASK_FMINM_D): New.
(MATCH_FMAXM_D): New.
(MASK_FMAXM_D): New.
(MATCH_FROUND_D): New.
(MASK_FROUND_D): New.
(MATCH_FROUNDNX_D): New.
(MASK_FROUNDNX_D): New.
(MATCH_FLTQ_D): New.
(MASK_FLTQ_D): New.
(MATCH_FLEQ_D): New.
(MASK_FLEQ_D): New.
(MATCH_FLI_Q): New.
(MASK_FLI_Q): New.
(MATCH_FMINM_Q): New.
(MASK_FMINM_Q): New.
(MATCH_FMAXM_Q): New.
(MASK_FMAXM_Q): New.
(MATCH_FROUND_Q): New.
(MASK_FROUND_Q): New.
(MATCH_FROUNDNX_Q): New.
(MASK_FROUNDNX_Q): New.
(MATCH_FLTQ_Q): New.
(MASK_FLTQ_Q): New.
(MATCH_FLEQ_Q): New.
(MASK_FLEQ_Q): New.
(MATCH_FCVTMOD_W_D): New.
(MASK_FCVTMOD_W_D): New.
(MATCH_FMVH_X_D): New.
(MASK_FMVH_X_D): New.
(MATCH_FMVH_X_Q): New.
(MASK_FMVH_X_Q): New.
(MATCH_FMVP_D_X): New.
(MASK_FMVP_D_X): New.
(MATCH_FMVP_Q_X): New.
(MASK_FMVP_Q_X): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction
classes for the Zfa extension.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Add support for
new format string directive 'Wfv'.
* riscv-opc.c: Add Zfa instructions.
Co-Developed-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Co-Developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Ventana Micro has published the specification for their
XVentanaCondOps ("conditional ops") extension at
https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf
which contains two new instructions
- vt.maskc
- vt.maskcn
that can be used in constructing branchless sequences for
various conditional-arithmetic, conditional-logical, and
conditional-select operations.
To support such vendor-defined instructions in the mainline binutils,
this change also adds a riscv_supported_vendor_x_ext secondary
dispatch table (but also keeps the behaviour of allowing any unknow
X-extension to be specified in addition to the known ones from this
table).
As discussed, this change already includes the planned/agreed future
requirements for X-extensions (which are likely to be captured in the
riscv-toolchain-conventions repository):
- a public specification document is available (see above) and is
referenced from the gas-documentation
- the naming follows chapter 27 of the RISC-V ISA specification
- instructions are prefixed by a vendor-prefix (vt for Ventana)
to ensure that they neither conflict with future standard
extensions nor clash with other vendors
bfd/ChangeLog:
* elfxx-riscv.c (riscv_get_default_ext_version): Add riscv_supported_vendor_x_ext.
(riscv_multi_subset_supports): Recognize INSN_CLASS_XVENTANACONDOPS.
gas/ChangeLog:
* doc/c-riscv.texi: Add section to list custom extensions and
their documentation URLs.
* testsuite/gas/riscv/x-ventana-condops.d: New test.
* testsuite/gas/riscv/x-ventana-condops.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h Add vt.maskc and vt.maskcn.
* opcode/riscv.h (enum riscv_insn_class): Add INSN_CLASS_XVENTANACONDOPS.
opcodes/ChangeLog:
* riscv-opc.c: Add vt.maskc and vt.maskcn.
Series-version: 1
Series-to: binutils@sourceware.org
Series-cc: Kito Cheng <kito.cheng@sifive.com>
Series-cc: Nelson Chu <nelson.chu@sifive.com>
Series-cc: Greg Favor <gfavor@ventanamicro.com>
Series-cc: Christoph Muellner <cmuellner@gcc.gnu.org>
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
This commit adds 'Ssstateen' extension, which is a supervisor-visible view
of the 'Smstateen' extension. It means, this extension implements sstateen*
and hstateen* CSRs of the 'Smstateen' extension.
Note that 'Smstateen' extension itself is unchanged but due to
implementation simplicity, it is implemented so that 'Smstateen' implies
'Ssstateen' (just like 'M' implies 'Zmmul').
This is based on the latest version of RISC-V Profiles
(version 0.9-draft, Frozen):
<226b7f6430>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Update implication rules.
(riscv_supported_std_s_ext) Add 'Ssstateen' extension.
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Rename
CSR_CLASS_SMSTATEEN_AND_H{,_32} to CSR_CLASS_SSSTATEEN_...
Add CSR_CLASS_SSSTATEEN.
(riscv_csr_address): Support new/renamed CSR classes.
* testsuite/gas/riscv/csr.s: Add 'Ssstateen' extension to comment.
* testsuite/gas/riscv/csr-version-1p9p1.l: Reflect changes to
error messages.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/ssstateen-csr.s: Test for 'Ssstateen' CSRs.
* testsuite/gas/riscv/ssstateen-csr.d: Likewise.
* testsuite/gas/riscv/smstateen-csr-s.d: Test to make sure that
supervisor/hypervisor part of 'Smstateen' CSRs are accessible from
'RV32IH_Smstateen', not just from 'RV32IH_Ssstateen' that is tested
in ssstateen-csr.d.
include/ChangeLog:
* opcode/riscv-opc.h: Update DECLARE_CSR declarations with
new CSR classes.
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemPair extension, a collection of T-Head specific
two-GP-register memory operations.
The 'th' prefix and the "XTheadMemPair" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemIdx extension, a collection of T-Head specific
GPR memory access instructions.
The 'th' prefix and the "XTheadMemIdx" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 44 instructions
(BU,HU,WU only for loads (zero-extend instead of sign-extend)):
* {L,S}{D,W,WU,H,HU,B,BU}{IA,IB} rd, rs1, imm5, imm2
* {L,S}R{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
* {L,S}UR{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadFMemIdx extension, a collection of
T-Head-specific floating-point memory access instructions.
The 'th' prefix and the "XTheadFMemIdx" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMac extension, a collection of
T-Head-specific multiply-accumulate instructions.
The 'th' prefix and the "XTheadMac" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCondMov extension, a collection of
T-Head-specific conditional move instructions.
The 'th' prefix and the "XTheadCondMov" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XThead{Ba,Bb,Bs} extensions, a collection of
T-Head-specific bitmanipulation instructions.
The 'th' prefix and the "XThead{Ba,Bb,Bs}" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadSync extension, a collection of
T-Head-specific multi-processor synchronization instructions.
The 'th' prefix and the "XTheadSync" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCmo extension, a collection of T-Head specific
cache management operations.
The 'th' prefix and the "XTheadCmo" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 21 instructions:
* DCACHE.{C,CI,I}ALL
* DCACHE.{C,CI,I}{PA,VA,SW} rs1
* DCACHE.C{PAL1,VAL1} rs1
* ICACHE.I{ALL,ALLS}
* ICACHE.I{PA,VA} rs1
* L2CACHE.{C,CI,I}ALL
Contrary to Zicbom, the XTheadCmo instructions don't have a constant
displacement, therefore we have a different syntax for the arguments.
To clarify this is intended behaviour, there is a set of negative test
for Zicbom-style arguments in x-thead-cmo-fail.s.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
v2:
- Add missing DECLARE_INSN() list
- Fix ordering
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
According to the picture 28.1 in the current ISA spec, h is no larger the
multi-letter extension, it is a single extension after v. Therefore, this
patch fix the implementation, and use the single h to control hypervisor
CSRs and instructions, which we promised to do before.
bfd/
* elfxx-riscv.c (riscv_supported_std_ext): Added h with version 1.0 after v.
(riscv_supported_std_h_ext): Removed.
(riscv_all_supported_ext): Updated since riscv_supported_std_h_ext is removed.
(riscv_prefix_ext_class): Removed RV_ISA_CLASS_H.
(parse_config): Updated since riscv_prefix_ext_class is removed.
(riscv_recognized_prefixed_ext): Likewise.
(riscv_get_default_ext_version): Likewise.
(riscv_multi_subset_supports): Handle INSN_CLASS_H for hypervisor instructions.
(riscv_multi_subset_supports_ext): Likewise.
gas/
* config/tc-riscv.c (riscv_csr_class): Added CSR_CLASS_H and CSR_CLASS_H_32 for
hypervisor CSRs.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Updated since hypervisor CSRs are
controlled by single h extension for now.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/h-ext-32.d: Added h to architecture string.
* testsuite/gas/riscv/h-ext-64.d: Likewise.
* testsuite/gas/riscv/march-fail-single-prefix-h: Removed since h is no
longer multi-letter extension.
* testsuite/gas/riscv/march-fail-unknown-h.d: Likewise.
include/
* opcode/riscv-opc.h: Control hypervisor CSRs by h extension, rather than
the privileged spec verisons.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_H.
opcodes/
* riscv-opc.c (riscv_opcodes): Control hypervisor instructions by h extension.
As fmv.x.q and fmv.q.x instructions are RV128-only (not RV64-only),
it should be removed until RV128 support for GNU Binutils is required
again.
gas/ChangeLog:
* testsuite/gas/riscv/fmv.x.q-rv64-fail.d: New failure test.
* testsuite/gas/riscv/fmv.x.q-rv64-fail.l: Likewise.
* testsuite/gas/riscv/fmv.x.q-rv64-fail.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_FMV_X_Q, MASK_FMV_X_Q,
MATCH_FMV_Q_X, MASK_FMV_Q_X): Remove RV128-only instructions.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Remove RV128-only instructions.
The recently added support for the Zicbo{m,p,z} extensions did not
include DECLARE_INSN() declarations for the instructions.
These declarations are needed by GDB's instruction detection code.
This patch adds them.
Signed-off-by: Christoph Muellner <cmuellner@gcc.gnu.org>
* Removed N extension CSRs,
ustatus, uie, utvec, uscratch, uepc, ucause, utval and uip.
* Removed two supervisor CSRs,
sedeleg and sideleg.
* Changed debug CSR address of scontext from 0x7aa to 0x5a8. We cannot support
different versions of debug specs for now, so only supporting the latest one is
the only way to move forward.
* Added debug CSRs,
mscontext (0x7aa), mcontrol6 (0x7a1, tdata1) and tmexttrigger ((0x7a1, tdata1).
* Regarded hcontext as a debug CSR.
include/
* opcode/riscv-opc.h: Updated CSRs to privileged spec v1.12 and
debug spec v1.0.
gas/
* testsuite/gas/riscv/csr.s: Updated CSRs to privileged spec v1.12
and debug spec v1.0.
* testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Likewise.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
This makes way for a clean 1.12 based Hypervisor Ext support.
There are no known implementors of 1.9.1 H-ext. (Per Jim, kendryte k210
is based on priv spec 1.9.1, but it seems unlikely that they implemented
H-ext).
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Nelson Chu <nelson.chu@sifive.com>
gas/
* testsuite/gas/riscv/csr-dw-regnums.d: Drop the hypervisor csrs
defined in the privileged spec 1.9.1.
* testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg.s: Likewise.
include/
* opcode/riscv-opc.h: Drop the hypervisor csrs defined in the
privileged spec 1.9.1.
According to the privileged spec, there are five new instructions for
svinval extension. Two of them (HINVAL.VVMA and HINVAL.GVMA) need to
enable the hypervisor extension. But there is no implementation of
hypervisor extension in mainline for now, so let's consider the related
issues later.
31..25 24..20 19..15 14..12 11...7 6..2 1..0
sinval.vma 0001011 rs2 rs1 000 00000 11100 11
sfence.w.inval 0001100 00000 00000 000 00000 11100 11
sfence.inval.ir 0001100 00001 00000 000 00000 11100 11
hinval.vvma 0010011 rs2 rs1 000 00000 11100 11
hinval.gvma 0110011 rs2 rs1 000 00000 11100 11
This patch is cherry-picked from the riscv integration branch since the
svinval extension is frozen for now. Besides, we fix the funct7 encodings
of hinval.vvma and hinval.gvma, from 0x0011011 and 0x0111011 to 0x0010011
and 0x0110011.
bfd/
* elfxx-riscv.c (riscv_supported_std_s_ext): Added svinval.
(riscv_multi_subset_supports): Handle INSN_CLASS_SVINVAL.
gas/
* testsuite/gas/riscv/svinval.d: New testcase.
* testsuite/gas/riscv/svinval.s: Likewise.
include/
* opcode/riscv-opc.h: Added encodings for svinval.
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_SVINVAL.
opcodes/
* riscv-opc.c (riscv_opcodes): Added svinval instructions.
2021-11-17 Jim Wilson <jimw@sifive.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
This patch is porting from the following riscv github,
https://github.com/riscv/riscv-binutils-gdb/tree/rvv-1.0.x
And here is the vector spec,
https://github.com/riscv/riscv-v-spec
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Added imply rules
of v, zve and zvl extensions.
(riscv_supported_std_ext): Updated verison of v to 1.0.
(riscv_supported_std_z_ext): Added zve and zvl extensions.
(riscv_parse_check_conflicts): The zvl extensions need to
enable either v or zve extension.
(riscv_multi_subset_supports): Check the subset list to know
if the INSN_CLASS_V and INSN_CLASS_ZVEF instructions are supported.
gas/
* config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_V.
(enum reg_class): Added RCLASS_VECR and RCLASS_VECM.
(validate_riscv_insn): Check whether the rvv operands are valid.
(md_begin): Initialize register hash for rvv registers.
(macro_build): Added rvv operands when expanding rvv pseudoes.
(vector_macro): Expand rvv macros into one or more instructions.
(macro): Likewise.
(my_getVsetvliExpression): Similar to my_getVsetvliExpression,
but used for parsing vsetvli operands.
(riscv_ip): Parse and encode rvv operands. Besides, The rvv loads
and stores with EEW 64 cannot be used when zve32x is enabled.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated -march
to rv32ifv_zkr.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg.s: Added rvv csr testcases.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/march-imply-v.d: New testcase.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.l: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.l: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.d: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.s: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.d: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.s: Likewise.
* testsuite/gas/riscv/vector-insns.d: Likewise.
* testsuite/gas/riscv/vector-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Defined mask/match encodings and csrs for rvv.
* opcode/riscv.h: Defined rvv immediate encodings and fields.
(enum riscv_insn_class): Added INSN_CLASS_V and INSN_CLASS_ZVEF.
(INSN_V_EEW64): Defined.
(M_VMSGE, M_VMSGEU): Added for the rvv pseudoes.
opcodes/
* riscv-dis.c (print_insn_args): Dump the rvv operands.
* riscv-opc.c (riscv_vecr_names_numeric): Defined rvv registers.
(riscv_vecm_names_numeric): Likewise.
(riscv_vsew): Likewise.
(riscv_vlmul): Likewise.
(riscv_vta): Likewise.
(riscv_vma): Likewise.
(match_vs1_eq_vs2): Added for rvv Vu operand.
(match_vd_eq_vs1_eq_vs2): Added for rvv Vv operand.
(riscv_opcodes): Added rvv v1.0 instructions.
Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from
zbb,zbc, we just change the class attribute to make them both support.
The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd
and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs'
symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add
a new Entropy Source CSR define 'seed' located at address 0x015.
bfd/
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
crypto extension.
gas/
*config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR.
(riscv_csr_address): Checked for CSR_CLASS_ZKR.
(validate_riscv_insn): Added y and Y for bs and rnum operands.
(riscv_ip): Handle y and Y operands.
include/
* opcode/riscv-opc.h: Added encodings of crypto instructions.
Also defined new csr seed, which address is 0x15.
* opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto.
opcodes/
* riscv-dis.c (print_insn_args): Recognized new y and Y operands.
* riscv-opc.c (riscv_opcodes): Added crypto instructions.
