This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds support for the mitigation for Spectre Variant 4 by
adding the PSTATE bit SSBS which are accessible using MSR and MRS
instructions. Although this is a mandatory addition to the ARMv8.5-A,
it is permitted to be added to any version of the ARMv8 architecture.
This is enabled using the command line option of +ssbs for older
versions.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SSBS): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "ssbs".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/ssbs-illegal1.d: New test.
* testsuite/gas/aarch64/ssbs-illegal1.l: New test.
* testsuite/gas/aarch64/ssbs-illegal2.d: New test.
* testsuite/gas/aarch64/ssbs-illegal2.l: New test.
* testsuite/gas/aarch64/ssbs.s: New test.
* testsuite/gas/aarch64/ssbs1.d: Test with +ssbs
* testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the new system registers SCXTNUM_ELx and ID_PFR2_EL1.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SCXTNUM): New.
(AARCH64_FEATURE_ID_PFR2): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
(aarch64_sys_reg_supported_p): New checks for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test registers
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification)
The Branch Target Identification instructions (BTI) are allocated to
existing HINT space, using HINT numbers 32, 34, 36, 38, such that
bits[7:6] of the instruction identify the compatibility of the BTI
instruction to different branches.
BTI {<targets>}
where <targets> one of the following, specifying which type of
indirection is allowed:
j : Can be a target of any BR Xn isntruction.
c : Can be a target of any BLR Xn and BR {X16|X17}.
jc: Can be a target of any free branch.
A BTI instruction without any <targets> is the strictest of all and
can not be a target of nay free branch.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BTI): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default.
(aarch64_opnd): Add AARCH64_OPND_BTI_TARGET.
(HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to
define HINT #imm values.
(HINT_OPD_JC, HINT_OPD_NULL): Likewise.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_bti_operand): New.
(process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET.
(parse_operands): Likewise.
* testsuite/gas/aarch64/system.d: Update for BTI.
* testsuite/gas/aarch64/bti.s: New.
* testsuite/gas/aarch64/bti.d: New.
* testsuite/gas/aarch64/illegal-bti.d: New.
* testsuite/gas/aarch64/illegal-bti.l: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the following:
MSR Xn, RNDR
MSR Xn, RNDRRS
These are optional instructions in ARMv8.5-A and hence the new
+rng is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_RNG): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): New "rng" option.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: Test both instructions.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/dc-data-cache-operation-an-alias-of-sys)
This patch adds the DC CVADP instruction. Since this has a separate
identification mechanism a new feature bit is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CVADP): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test instruction.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the data processing instructions that are new to
ARMv8.5-A.
1) There are 2 instructions: xaflag, axflag, that are added to
manipulate the states of the flag and are used to convert between the
Arm representation and the fcmp representation.
2) The other instructions are rounding instructions which have 8
versions based on whether the floating-point number is a
Single-Precision or Double-Precision number, whether the target
integer is a 32-bit or 64-bit integer and whether the rounding mode is
the ambient rounding mode or to zero. Each of these instruction is
available in both Scalar and Vector forms.
Since both 1) and 2) have separate identification mechanism and it is
permissible that a ARMv8.4 compliant implementation may include any
arbitrary subset of the ARMv8.5 features unless otherwise specified,
new feature bits are added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New.
(AARCH64_FEATURE_FRINTTS): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_flagmanip): New.
(aarch64_feature_frintts): New.
(FLAGMANIP, FRINTTS): New.
(aarch64_opcode_table): Add entries for xaflag, axflag
and frint[32,64][x,z] instructions.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-dp.s: New.
* testsuite/gas/aarch64/armv8_5-a-dp.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
This patch adds the verification rules for move prefix constraints.
The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at
PC+4. Particularly the following constraints are handled by this patch
* MOVPRFX must be followed by an instruction.
* MOVPRFX can only be followed by non-layout altering directives.
* MOVPRFX destination register MUST be used as the destination register in the
instruction at PC+4, and is not allowed to be used in any other position other than
destructive input. This includes registers that architecturally overlap. e.g. x1
should be treated as z1.
* MOVPRFX must be followed by a restricted set of SVE instructions.
* The size of the destination register of MOVPRFX must be equal to that of
the operation at PC+4.
* The predicate register and operation of MOVPRFX must match that of the instruction
at PC+4
* The predicated instruction at PC+4 must use the merging predicate.
* Architectural aliases and pseudo-instructions need to be supported as well.
* MOVPRFX cannot be the last instruction in a sequence
Any failure to adhere to any of these constrains will emit an assembly warning
and a disassembly note.
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (aarch64_inst): Remove.
(enum err_type): Add ERR_VFI.
(aarch64_is_destructive_by_operands): New.
(init_insn_sequence): New.
(aarch64_decode_insn): Remove param name.
opcodes/
* aarch64-opc.c (init_insn_block): New.
(verify_constraints, aarch64_is_destructive_by_operands): New.
* aarch64-opc.h (verify_constraints): New.
gas/
* config/tc-aarch64.c (output_operand_error_report): Order warnings.
The current verifiers only take an instruction description and encoded value as
arguments. This was enough when the verifiers only needed to do simple checking
but it's insufficient for the purposes of validating instruction sequences.
This patch adds the required arguments and also a flag to allow a verifier to
distinguish between whether it's being run during encoding or decoding. It also
allows for errors and warnings to be returned by a verifier instead of a simple
pass/fail.
include/
* opcode/aarch64.h (struct aarch64_opcode): Expand verifiers to take
more arguments.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Update verifier call.
* aarch64-opc.c (verify_ldpsw): Update arguments.
Previously the ERR_ values were defined as different constants, to make this a
bit more type safe and so they can be more easily re-used I'm changing them into
an actual enum and updating any usages.
include/
* opcode/aarch64.h (enum err_type): New.
(aarch64_decode_insn): Use it.
opcodes/
* aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove.
(aarch64_decode_insn, print_insn_aarch64_word): Use err_type.
This patch introduces aarch64_instr_sequence which is a structure similar to IT
blocks on Arm in order to track instructions that introduce a constraint or
dependency on instruction 1..N positions away from the instruction that opened
the block.
The struct is also wired through to the locations that require it.
gas/
* config/tc-aarch64.c (now_instr_sequence):
(*insn_sequence, now_instr_sequence): New.
(output_operand_error_record, do_encode): Add insn_sequence.
(md_assemble): Update insn_sequence.
(try_to_encode_as_unscaled_ldst, fix_mov_imm_insn, fix_insn):
Pass insn_sequence.
* config/tc-aarch64.h (struct aarch64_segment_info_type):
Add insn_sequence.
include/
* opcode/aarch64.h (struct aarch64_instr_sequence): New.
(aarch64_opcode_encode): Use it.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
* aarch64-dis.c (insn_sequence): New.
This patch series is to allow certain instructions such as the SVE MOVPRFX
instruction to apply a constraint/dependency on the instruction at PC+4.
This patch starts this off by marking which instructions impose the constraint
and which instructions must adhere to the constraint. This is done in a
generic way by extending the verifiers.
* The constraint F_SCAN indicates that an instruction opens a sequence and imposes
a constraint on an instructions following it. The length of the sequence depends
on the instruction itself and it handled in the verifier code.
* The C_SCAN_MOVPRFX flag is used to indicate which constrain the instruction is
checked against. An instruction with both F_SCAN and C_SCAN_MOVPRFX starts a
block for the C_SCAN_MOVPRFX instruction, and one with only C_SCAN_MOVPRFX must
adhere to a previous block constraint is applicable.
The SVE instructions in this list have been marked according to the SVE
specification[1].
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (struct aarch64_opcode): Add constraints,
extend flags field size.
(F_SCAN, C_SCAN_MOVPRFX, C_MAX_ELEM): New.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
constraints.
(_SVE_INSNC): New.
(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
constraints.
(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
F_SCAN flags.
(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
C_SCAN_MOVPRFX and C_MAX_ELEM constraints.
Some instructions in Armv8-a place a limitation on FP16 registers that can be
used as the register from which to select an element from.
e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction
does not apply for all instructions, e.g. fcmla does not have this restriction
as it gets an extra bit from the M field.
Unfortunately, this restriction to S_H was added for all _Em operands before,
meaning for a large number of instructions you couldn't use the full register
file.
This fixes the issue by introducing a new operand _Em16 which applies this
restriction only when paired with S_H and leaves the _Em and the other
qualifiers for _Em16 unbounded (i.e. using the full 5 bit range).
Also the patch updates all instructions that should be affected by this.
opcodes/
PR binutils/23192
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
* aarch64-opc.c (operand_general_constraint_met_p,
aarch64_print_operand): Likewise.
* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
fmlal2, fmlsl2.
(AARCH64_OPERANDS): Add Em2.
gas/
PR binutils/23192
* config/tc-aarch64.c (process_omitted_operand, parse_operands): Add
AARCH64_OPND_Em16
* testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper
16 registers.
* testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.s: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
* testsuite/gas/aarch64/sve.d: Likewise.
include/
PR binutils/23192
*opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
This patch adds constraints for read and write only system registers with the
msr and mrs instructions. The code will treat having both flags set and none
set as the same. These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs. If The
constraint fails a warning is emitted.
Examples of the warnings generated:
test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'
and disassembly notes:
0000000000000000 <main>:
0: d5130503 msr dbgdtrtx_el0, x3
4: d5130503 msr dbgdtrtx_el0, x3
8: d5330503 mrs x3, dbgdtrrx_el0
c: d5330503 mrs x3, dbgdtrrx_el0
10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register.
Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two. An exact
constraint match is always prefered over partial ones if available.
As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
gas/
PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.
include/
PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.
opcodes/
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.
These notes can contain information about a failing constraint such as reading
from a write-only register. The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.
For assembly this patch adds a new non-fatal status for errors. This is
essentially a warning. The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic. Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error. But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning. By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.
gas/
PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.
opcodes/
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
This patch if the first patch in a series to add the ability to add constraints
to system registers that an instruction must adhere to in order for the register
to be usable with that instruction.
These constraints can also be used to disambiguate between registers with the
same encoding during disassembly.
This patch adds a new flags entry in the sysreg structures and ensures it is
filled in and read out during assembly/disassembly. It also adds the ability for
the assemble and disassemble functions to be able to gracefully fail and re-use
the existing error reporting infrastructure.
The return type of these functions are changed to a boolean to denote success or
failure and the error structure is passed around to them. This requires
aarch64-gen changes so a lot of the changes here are just mechanical.
gas/
PR binutils/21446
* config/tc-aarch64.c (parse_sys_reg): Return register flags.
(parse_operands): Fill in register flags.
gdb/
PR binutils/21446
* aarch64-tdep.c (aarch64_analyze_prologue,
aarch64_software_single_step, aarch64_displaced_step_copy_insn):
Indicate not interested in errors.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct.
(aarch64_decode_insn): Accept error struct.
opcodes/
PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
Dot products deviate from the normal disassembly rules for lane indexed
instruction. Their canonical representation is in the form of:
v0.2s, v0.8b, v0.4b[0] instead of v0.2s, v0.8b, v0.b[0] to try to denote
that these instructions select 4x 1 byte elements instead of a single 1 byte
element.
Previously we were disassembling them following the normal rules, this patch
corrects the disassembly.
gas/
PR gas/22559
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_S_4B.
* gas/testsuite/gas/aarch64/dotproduct.d: Update disassembly.
include/
PR gas/22559
* aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_S_4B.
opcodes/
PR gas/22559
* aarch64-asm.c (aarch64_ins_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-dis.c (aarch64_ext_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
* aarch64-tbl.h (QL_V2DOT): Change S_B to S_4B.
Previously parse_vector_type_for_operand was changed to allow the use of 4b
register size for indexed lane instructions. However this had the unintended
side effect of also allowing 4b for normal vector registers.
Because this support was only partial the rest of the tool silently treated
4b as 8b and continued. This patch adds full support for 4b so it can be
properly distinguished from 8b and the correct errors are generated.
With this patch you still can't encode any instruction which actually requires
v<num>.4b but such instructions don't exist so to prevent needing a workaround
in get_vreg_qualifier_from_value this was just omitted.
gas/
PR gas/22529
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_V_4B.
* gas/testsuite/gas/aarch64/pr22529.s: New.
* gas/testsuite/gas/aarch64/pr22529.d: New.
* gas/testsuite/gas/aarch64/pr22529.l: New.
include/
PR gas/22529
* opcode/aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_V_4B.
opcodes/
PR gas/22529
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
This patch separates the new FP16 instructions backported from Armv8.4-a to Armv8.2-a
into a new flag order to distinguish them from the rest of the already existing optional
FP16 instructions in Armv8.2-a.
The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory on
Armv8.4-a.
gas/
* config/tc-aarch64.c (fp16fml): New.
* doc/c-aarch64.texi (fp16fml): New.
* testsuite/gas/aarch64/armv8_2-a-crypto-fp16.d (fp16): Make fp16fml.
* testsuite/gas/aarch64/armv8_3-a-crypto-fp16.d (fp16): Make fp16fml.
include/
* opcode/aarch64.h: (AARCH64_FEATURE_F16_FML): New.
(AARCH64_ARCH_V8_4): Enable AARCH64_FEATURE_F16_FML by default.
opcodes/
* aarch64-tbl.h (aarch64_feature_fp_16_v8_2): Require AARCH64_FEATURE_F16_FML
and AARCH64_FEATURE_F16.
The new options are:
+aes: Enables the AES instructions of Armv8-a,
enabled by default with +crypto.
+sha2: Enables the SHA1 and SHA2 instructions of Armv8-a,
enabled by default with +crypto.
These options have been turned on by default when +crypto
is used, as such no breakage is expected.
The reason for the split is because with the introduction of Armv8.4-a
the implementation of AES has explicitly been made independent of the
implementation of the other crypto extensions. Backporting the split does
not break any of the previous requirements and so is safe to do.
gas * config/tc-aarch64.c
(aarch64_features): Include AES and SHA2 in CRYPTO.
Add SHA2 and AES.
include * opcode/aarch64.h:
(AARCH64_FEATURE_SHA2, AARCH64_FEATURE_AES): New.
opcodes * aarch64-tbl.h (aarch64_feature_crypto): Add AES and SHA2.
(aarch64_feature_sha2, aarch64_feature_aes): New.
(SHA2, AES): New.
(AES_INSN, SHA2_INSN): New.
(pmull, pmull2, aese, aesd, aesmc, aesimc): Change to AES_INS.
(sha1h, sha1su1, sha256su0, sha1c, sha1p,
sha1m, sha1su0, sha256h, sha256h2, sha256su1):
Change to SHA2_INS.
The FP16 feature is optional in ARMv8.2, so it is wrong to add it to
the default AARCH64_ARCH_V8_2 feature flags. This patch makes the
behaviour consistent with that of gcc, which also does not assume FP16
for ARMv8.2.
include/
* opcode/aarch64.h (AARCH64_ARCH_V8_2): Drop
AARCH64_FEATURE_F16.
This patch supports some additions to the SVE architecture prior to
its public release.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16)
(AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2)
(AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX)
(AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD)
(OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD)
(OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S)
(OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H)
(OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH)
(OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD)
(OP_SVE_V_HSD): New macros.
(OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD)
(OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD)
(OP_SVE_VZV_SD, OP_SVE_V_SD): Delete.
(aarch64_opcode_table): Add new SVE instructions.
(aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate
for rotation operands. Add new SVE operands.
* aarch64-asm.h (ins_sve_addr_ri_s4): New inserter.
(ins_sve_quad_index): Likewise.
(ins_imm_rotate): Split into...
(ins_imm_rotate1, ins_imm_rotate2): ...these two inserters.
* aarch64-asm.c (aarch64_ins_imm_rotate): Split into...
(aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two
functions.
(aarch64_ins_sve_addr_ri_s4): New function.
(aarch64_ins_sve_quad_index): Likewise.
(do_misc_encoding): Handle "MOV Zn.Q, Qm".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4): New extractor.
(ext_sve_quad_index): Likewise.
(ext_imm_rotate): Split into...
(ext_imm_rotate1, ext_imm_rotate2): ...these two extractors.
* aarch64-dis.c (aarch64_ext_imm_rotate): Split into...
(aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two
functions.
(aarch64_ext_sve_addr_ri_s4): New function.
(aarch64_ext_sve_quad_index): Likewise.
(aarch64_ext_sve_index): Allow quad indices.
(do_misc_decoding): Likewise.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New
aarch64_field_kinds.
(OPD_F_OD_MASK): Widen by one bit.
(OPD_F_NO_ZR): Bump accordingly.
(get_operand_field_width): New function.
* aarch64-opc.c (fields): Add new SVE fields.
(operand_general_constraint_met_p): Handle new SVE operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
gas/
* doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum.
* config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q
to be used with SVE registers.
(parse_operands): Handle new SVE operands.
(aarch64_features): Make "sve" require F16 rather than FP. Also
require COMPNUM.
* testsuite/gas/aarch64/sve.s: Add tests for new instructions.
Include compnum tests.
* testsuite/gas/aarch64/sve.d: Update accordingly.
* testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions.
* testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also
update expected output for new FMOV and MOV alternatives.
This patch adds a named "compnum" feature for the ARMv8.3-A FCADD
and FCMLA extensions.
include/
* opcode/aarch64.h (AARCH64_FEATURE_COMPNUM): New macro.
(AARCH64_ARCH_V8_3): Include AARCH64_FEATURE_COMPNUM.
opcodes/
* aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with...
(aarch64_feature_compnum): ...this.
(SIMD_V8_3): Replace with...
(COMPNUM): ...this.
(CNUM_INSN): New macro.
(aarch64_opcode_table): Use it for the complex number instructions.
gas/
* doc/c-aarch64.texi: Add a "compnum" entry.
* config/tc-aarch64.c (aarch64_features): Likewise,
* testsuite/gas/aarch64/advsimd-compnum.s: New test.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
The weaker release consistency support of ARMv8.3-A is allowed as an optional
extension for ARMv8.2-A, so separate command line option and feature flag is
added: -march=armv8.2-a+rcpc turns LDAPR, LDAPRB, LDAPRH instructions on.
opcodes/
* aarch64-tbl.h (RCPC, RCPC_INSN): Define.
(aarch64_opcode_table): Use RCPC_INSN.
include/
* opcode/aarch64.h (AARCH64_FEATURE_RCPC): Define.
(AARCH64_ARCH_V8_3): Update.
gas/
* config/tc-aarch64.c (aarch64_features): Add rcpc.
* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.d: This.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.s: This.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: New test.
The internal CN register representation for coprocessor fields used in aarch64
sys, sysl instructions are removed in this patch.
After the change, those fields are represented as immediate. Related checks are
added as well.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range
qualifier.
(operand_general_constraint_met_p): Remove case for CP_REG.
(aarch64_print_operand): Print CRn, CRm operand using imm field.
* aarch64-tbl.h (QL_SYS): Use CR qualifier.
(QL_SYSL): Likewise.
(aarch64_opcode_table): Change CRn, CRm operand class and type.
* aarch64-opc-2.c : Regenerate.
* aarch64-asm-2.c : Likewise.
* aarch64-dis-2.c : Likewise.
include/
* opcode/aarch64.h (aarch64_operand_class): Remove
AARCH64_OPND_CLASS_CP_REG.
(enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn,
AARCH64_OPND_Cm to AARCH64_OPND_CRm.
(aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier.
gas/
* config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register.
(get_reg_expected_msg): Remove CN register case.
(parse_operands): rewrite parser for CRn, CRm operand.
(reg_names): Remove CN register.
* testsuite/gas/aarch64/diagnostic.s: Add a new test case.
* testsuite/gas/aarch64/diagnostic.l: Adjust error message.
Add support for FCMLA and FCADD complex arithmetic SIMD instructions.
FCMLA has an indexed element variant where the index range has to be
treated specially because a complex number takes two elements and the
indexed vector size depends on the other operands.
These complex number SIMD instructions are part of ARMv8.3
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
include/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1,
AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3.
(enum aarch64_op): Add OP_FCMLA_ELEM.
opcodes/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define.
(aarch64_feature_simd_v8_3, SIMD_V8_3): Define.
(aarch64_opcode_table): Add fcmla and fcadd.
(AARCH64_OPERANDS): Add IMM_ROT{1,2,3}.
* aarch64-asm.h (aarch64_ins_imm_rotate): Declare.
* aarch64-asm.c (aarch64_ins_imm_rotate): Define.
* aarch64-dis.h (aarch64_ext_imm_rotate): Declare.
* aarch64-dis.c (aarch64_ext_imm_rotate): Define.
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}.
* aarch64-opc.c (fields): Add FLD_rotate{1,2,3}.
(operand_general_constraint_met_p): Rotate and index range check.
(aarch64_print_operand): Handle rotate operand.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*.
* testsuite/gas/aarch64/advsimd-armv8_3.d: New.
* testsuite/gas/aarch64/advsimd-armv8_3.s: New.
* testsuite/gas/aarch64/illegal-fcmla.s: New.
* testsuite/gas/aarch64/illegal-fcmla.l: New.
* testsuite/gas/aarch64/illegal-fcmla.d: New.
ARMv8.3 can be selected with -march=armv8.3-a command line option.
An overview of the ARMv8.3 architecture extension is at
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a".
* doc/c-aarch64.texi (-march): Likewise.
include/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define.
(AARCH64_ARCH_V8_3): Define.
(AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
SVE defines new names for existing NZCV conditions, to reflect the
result of instructions like PTEST. This patch adds support for these
names.
The patch also adds comments to the disassembly output to show the
alternative names of a condition code. For example:
cinv x0, x1, cc
becomes:
cinv x0, x1, cc // cc = lo, ul, last
and:
b.cc f0 <...>
becomes:
b.cc f0 <...> // b.lo, b.ul, b.last
Doing this for the SVE names follows the practice recommended by the
SVE specification and is definitely useful when reading SVE code.
If the feeling is that it's too distracting elsewhere, we could add
an option to turn it off.
include/
* opcode/aarch64.h (aarch64_cond): Bump array size to 4.
opcodes/
* aarch64-dis.c (remove_dot_suffix): New function, split out from...
(print_mnemonic_name): ...here.
(print_comment): New function.
(print_aarch64_insn): Call it.
* aarch64-opc.c (aarch64_conds): Add SVE names.
(aarch64_print_operand): Print alternative condition names in
a comment.
gas/
* config/tc-aarch64.c (opcode_lookup): Search for the end of
a condition name, rather than assuming that it will have exactly
2 characters.
(parse_operands): Likewise.
* testsuite/gas/aarch64/alias.d: Add new condition-code comments
to the expected output.
* testsuite/gas/aarch64/beq_1.d: Likewise.
* testsuite/gas/aarch64/float-fp16.d: Likewise.
* testsuite/gas/aarch64/int-insns.d: Likewise.
* testsuite/gas/aarch64/no-aliases.d: Likewise.
* testsuite/gas/aarch64/programmer-friendly.d: Likewise.
* testsuite/gas/aarch64/reloc-insn.d: Likewise.
* testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s:
New test.
ld/
* testsuite/ld-aarch64/emit-relocs-280.d: Match branch comments.
* testsuite/ld-aarch64/weak-undefined.d: Likewise.
The main purpose of the SVE aarch64_insn_classes is to describe how
an index into an aarch64_opnd_qualifier_seq_t is represented in the
instruction encoding. Other instructions usually use flags for this
information, but (a) we're running out of those and (b) the iclass
would otherwise be unused for SVE.
include/
* opcode/aarch64.h (sve_cpy, sve_index, sve_limm, sve_misc)
(sve_movprfx, sve_pred_zm, sve_shift_pred, sve_shift_unpred)
(sve_size_bhs, sve_size_bhsd, sve_size_hsd, sve_size_sd): New
aarch64_insn_classes.
opcodes/
* aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16)
(FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New
aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
* aarch64-asm.c (aarch64_get_variant): New function.
(aarch64_encode_variant_using_iclass): Likewise.
(aarch64_opcode_encode): Call it.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): New function.
(aarch64_opcode_decode): Call it.
SVE uses some new fields to store W, X and scalar FP registers.
This patch adds corresponding operands.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_Rm): New aarch64_opnd.
(AARCH64_OPND_SVE_Rn_SP, AARCH64_OPND_SVE_VZn, AARCH64_OPND_SVE_Vd)
(AARCH64_OPND_SVE_Vm, AARCH64_OPND_SVE_Vn): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core
and FP register operands.
* aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm)
(FLD_SVE_Vn): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(aarch64_print_operand): Handle the new SVE core and FP register
operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm-2.c: Likewise.
* aarch64-dis-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE core
and FP register operands.
This patch adds support for the new SVE floating-point immediate
operands. One operand uses the same 8-bit encoding as base AArch64,
but in a different position. The others use a single bit to select
between two values.
One of the single-bit operands is a choice between 0 and 1, where 0
is not a valid 8-bit encoding. I think the cleanest way of handling
these single-bit immediates is therefore to use the IEEE float encoding
itself as the immediate value and select between the two possible values
when encoding and decoding.
As described in the covering note for the patch that added F_STRICT,
we get better error messages by accepting unsuffixed vector registers
and leaving the qualifier matching code to report an error. This means
that we carry on parsing the other operands, and so can try to parse FP
immediates for invalid instructions like:
fcpy z0, #2.5
In this case there is no suffix to tell us whether the immediate should
be treated as single or double precision. Again, we get better error
messages by picking one (arbitrary) immediate size and reporting an error
for the missing suffix later.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_FPIMM8): New aarch64_opnd.
(AARCH64_OPND_SVE_I1_HALF_ONE, AARCH64_OPND_SVE_I1_HALF_TWO)
(AARCH64_OPND_SVE_I1_ZERO_ONE): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP
immediate operands.
* aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind.
* aarch64-opc.c (fields): Add corresponding entry.
(operand_general_constraint_met_p): Handle the new SVE FP immediate
operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two)
(ins_sve_float_zero_one): New inserters.
* aarch64-asm.c (aarch64_ins_sve_float_half_one): New function.
(aarch64_ins_sve_float_half_two): Likewise.
(aarch64_ins_sve_float_zero_one): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two)
(ext_sve_float_zero_one): New extractors.
* aarch64-dis.c (aarch64_ext_sve_float_half_one): New function.
(aarch64_ext_sve_float_half_two): Likewise.
(aarch64_ext_sve_float_zero_one): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (double_precision_operand_p): New function.
(parse_operands): Use it to calculate the dp_p input to
parse_aarch64_imm_float. Handle the new SVE FP immediate operands.
This patch adds the new SVE integer immediate operands. There are
three kinds:
- simple signed and unsigned ranges, but with new widths and positions.
- 13-bit logical immediates. These have the same form as in base AArch64,
but at a different bit position.
In the case of the "MOV Zn.<T>, #<limm>" alias of DUPM, the logical
immediate <limm> is not allowed to be a valid DUP immediate, since DUP
is preferred over DUPM for constants that both instructions can handle.
- a new 9-bit arithmetic immediate, of the form "<imm8>{, LSL #8}".
In some contexts the operand is signed and in others it's unsigned.
As an extension, we allow shifted immediates to be written as a single
integer, e.g. "#256" is equivalent to "#1, LSL #8". We also use the
shiftless form as the preferred disassembly, except for the special
case of "#0, LSL #8" (a redundant encoding of 0).
include/
* opcode/aarch64.h (AARCH64_OPND_SIMM5): New aarch64_opnd.
(AARCH64_OPND_SVE_AIMM, AARCH64_OPND_SVE_ASIMM)
(AARCH64_OPND_SVE_INV_LIMM, AARCH64_OPND_SVE_LIMM)
(AARCH64_OPND_SVE_LIMM_MOV, AARCH64_OPND_SVE_SHLIMM_PRED)
(AARCH64_OPND_SVE_SHLIMM_UNPRED, AARCH64_OPND_SVE_SHRIMM_PRED)
(AARCH64_OPND_SVE_SHRIMM_UNPRED, AARCH64_OPND_SVE_SIMM5)
(AARCH64_OPND_SVE_SIMM5B, AARCH64_OPND_SVE_SIMM6)
(AARCH64_OPND_SVE_SIMM8, AARCH64_OPND_SVE_UIMM3)
(AARCH64_OPND_SVE_UIMM7, AARCH64_OPND_SVE_UIMM8)
(AARCH64_OPND_SVE_UIMM8_53): Likewise.
(aarch64_sve_dupm_mov_immediate_p): Declare.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
integer immediate operands.
* aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5)
(FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9)
(FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(operand_general_constraint_met_p): Handle the new SVE integer
immediate operands.
(aarch64_print_operand): Likewise.
(aarch64_sve_dupm_mov_immediate_p): New function.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm)
(ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters.
* aarch64-asm.c (aarch64_ins_limm_1): New function, split out from...
(aarch64_ins_limm): ...here.
(aarch64_ins_inv_limm): New function.
(aarch64_ins_sve_aimm): Likewise.
(aarch64_ins_sve_asimm): Likewise.
(aarch64_ins_sve_limm_mov): Likewise.
(aarch64_ins_sve_shlimm): Likewise.
(aarch64_ins_sve_shrimm): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm)
(ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors.
* aarch64-dis.c (decode_limm): New function, split out from...
(aarch64_ext_limm): ...here.
(aarch64_ext_inv_limm): New function.
(decode_sve_aimm): Likewise.
(aarch64_ext_sve_aimm): Likewise.
(aarch64_ext_sve_asimm): Likewise.
(aarch64_ext_sve_limm_mov): Likewise.
(aarch64_top_bit): Likewise.
(aarch64_ext_sve_shlimm): Likewise.
(aarch64_ext_sve_shrimm): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE integer
immediate operands.
This patch adds support for addresses of the form:
[<base>, #<offset>, MUL VL]
This involves adding a new AARCH64_MOD_MUL_VL modifier, which is
why I split it out from the other addressing modes.
For LD2, LD3 and LD4, the offset must be a multiple of the structure
size, so for LD3 the possible values are 0, 3, 6, .... The patch
therefore extends value_aligned_p to handle non-power-of-2 alignments.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4xVL): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_S4x2xVL, AARCH64_OPND_SVE_ADDR_RI_S4x3xVL)
(AARCH64_OPND_SVE_ADDR_RI_S4x4xVL, AARCH64_OPND_SVE_ADDR_RI_S6xVL)
(AARCH64_OPND_SVE_ADDR_RI_S9xVL): Likewise.
(AARCH64_MOD_MUL_VL): New aarch64_modifier_kind.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL
operands.
* aarch64-opc.c (aarch64_operand_modifiers): Initialize
the AARCH64_MOD_MUL_VL entry.
(value_aligned_p): Cope with non-power-of-two alignments.
(operand_general_constraint_met_p): Handle the new MUL VL addresses.
(print_immediate_offset_address): Likewise.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl)
(ins_sve_addr_ri_s9xvl): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function.
(aarch64_ins_sve_addr_ri_s6xvl): Likewise.
(aarch64_ins_sve_addr_ri_s9xvl): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl)
(ext_sve_addr_ri_s9xvl): New extractors.
* aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function.
(aarch64_ext_sve_addr_ri_s4xvl): Likewise.
(aarch64_ext_sve_addr_ri_s6xvl): Likewise.
(aarch64_ext_sve_addr_ri_s9xvl): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New
parse_shift_modes.
(parse_shift): Handle SHIFTED_MUL_VL.
(parse_address_main): Add an imm_shift_mode parameter.
(parse_address, parse_sve_address): Update accordingly.
(parse_operands): Handle MUL VL addressing modes.
This patch adds most of the new SVE addressing modes and associated
operands. A follow-on patch adds MUL VL, since handling it separately
makes the changes easier to read.
The patch also introduces a new "operand-dependent data" field to the
operand flags, based closely on the existing one for opcode flags.
For SVE this new field needs only 2 bits, but it could be widened
in future if necessary.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_U6): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_U6x2, AARCH64_OPND_SVE_ADDR_RI_U6x4)
(AARCH64_OPND_SVE_ADDR_RI_U6x8, AARCH64_OPND_SVE_ADDR_RR)
(AARCH64_OPND_SVE_ADDR_RR_LSL1, AARCH64_OPND_SVE_ADDR_RR_LSL2)
(AARCH64_OPND_SVE_ADDR_RR_LSL3, AARCH64_OPND_SVE_ADDR_RX)
(AARCH64_OPND_SVE_ADDR_RX_LSL1, AARCH64_OPND_SVE_ADDR_RX_LSL2)
(AARCH64_OPND_SVE_ADDR_RX_LSL3, AARCH64_OPND_SVE_ADDR_RZ)
(AARCH64_OPND_SVE_ADDR_RZ_LSL1, AARCH64_OPND_SVE_ADDR_RZ_LSL2)
(AARCH64_OPND_SVE_ADDR_RZ_LSL3, AARCH64_OPND_SVE_ADDR_RZ_XTW_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW_22, AARCH64_OPND_SVE_ADDR_RZ_XTW1_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW1_22, AARCH64_OPND_SVE_ADDR_RZ_XTW2_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW2_22, AARCH64_OPND_SVE_ADDR_RZ_XTW3_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW3_22, AARCH64_OPND_SVE_ADDR_ZI_U5)
(AARCH64_OPND_SVE_ADDR_ZI_U5x2, AARCH64_OPND_SVE_ADDR_ZI_U5x4)
(AARCH64_OPND_SVE_ADDR_ZI_U5x8, AARCH64_OPND_SVE_ADDR_ZZ_LSL)
(AARCH64_OPND_SVE_ADDR_ZZ_SXTW, AARCH64_OPND_SVE_ADDR_ZZ_UXTW):
Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
address operands.
* aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14)
(FLD_SVE_xs_22): New aarch64_field_kinds.
(OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags.
(get_operand_specific_data): New function.
* aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz,
FLD_SVE_xs_14 and FLD_SVE_xs_22.
(operand_general_constraint_met_p): Handle the new SVE address
operands.
(sve_reg): New array.
(get_addr_sve_reg_name): New function.
(aarch64_print_operand): Handle the new SVE address operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl)
(ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl)
(ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function.
(aarch64_ins_sve_addr_rr_lsl): Likewise.
(aarch64_ins_sve_addr_rz_xtw): Likewise.
(aarch64_ins_sve_addr_zi_u5): Likewise.
(aarch64_ins_sve_addr_zz): Likewise.
(aarch64_ins_sve_addr_zz_lsl): Likewise.
(aarch64_ins_sve_addr_zz_sxtw): Likewise.
(aarch64_ins_sve_addr_zz_uxtw): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl)
(ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl)
(ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors.
* aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function.
(aarch64_ext_sve_addr_ri_u6): Likewise.
(aarch64_ext_sve_addr_rr_lsl): Likewise.
(aarch64_ext_sve_addr_rz_xtw): Likewise.
(aarch64_ext_sve_addr_zi_u5): Likewise.
(aarch64_ext_sve_addr_zz): Likewise.
(aarch64_ext_sve_addr_zz_lsl): Likewise.
(aarch64_ext_sve_addr_zz_sxtw): Likewise.
(aarch64_ext_sve_addr_zz_uxtw): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New
register types.
(get_reg_expected_msg): Handle them.
(aarch64_addr_reg_parse): New function, split out from
aarch64_reg_parse_32_64. Handle Z registers too.
(aarch64_reg_parse_32_64): Call it.
(parse_address_main): Add base_qualifier, offset_qualifier,
base_type and offset_type parameters. Handle SVE base and offset
registers.
(parse_address): Update call to parse_address_main.
(parse_sve_address): New function.
(parse_operands): Parse the new SVE address operands.
Some SVE instructions count the number of elements in a given vector
pattern and allow a scale factor of [1, 16] to be applied to the result.
This scale factor is written ", MUL #n", where "MUL" is a new operator.
E.g.:
UQINCD X0, POW2, MUL #2
This patch adds support for this kind of operand.
All existing operators were shifts of some kind, so there was a natural
range of [0, 63] regardless of context. This was then narrowered further
by later checks (e.g. to [0, 31] when used for 32-bit values).
In contrast, MUL doesn't really have a natural context-independent range.
Rather than pick one arbitrarily, it seemed better to make the "shift"
amount a full 64-bit value and leave the range test to the usual
operand-checking code. I've rearranged the fields of aarch64_opnd_info
so that this doesn't increase the size of the structure (although I don't
think its size is critical anyway).
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN_SCALED): New
aarch64_opnd.
(AARCH64_MOD_MUL): New aarch64_modifier_kind.
(aarch64_opnd_info): Make shifter.amount an int64_t and
rearrange the fields.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind.
* aarch64-opc.c (fields): Add a corresponding entry.
(set_multiplier_out_of_range_error): New function.
(aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL.
(operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
(print_register_offset_address): Use PRIi64 to print the
shift amount.
(aarch64_print_operand): Likewise. Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_scale): New inserter.
* aarch64-asm.c (aarch64_ins_sve_scale): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_scale): New inserter.
* aarch64-dis.c (aarch64_ext_sve_scale): New function.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode.
(parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other
shift modes. Skip range tests for AARCH64_MOD_MUL.
(process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED.
(parse_operands): Likewise.
The SVE instructions have two enumerated operands: one to select a
vector pattern and another to select a prefetch operation. The latter
is a cut-down version of the base AArch64 prefetch operation.
Both types of operand can also be specified as raw enum values such as #31.
Reserved values can only be specified this way.
If it hadn't been for the pattern operand, I would have been tempted
to use the existing parsing for prefetch operations and add extra
checks for SVE. However, since the patterns needed new enum parsing
code anyway, it seeemed cleaner to reuse it for the prefetches too.
Because of the small number of enum values, I don't think we'd gain
anything by using hash tables.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN): New aarch64_opnd.
(AARCH64_OPND_SVE_PRFOP): Likewise.
(aarch64_sve_pattern_array): Declare.
(aarch64_sve_prfop_array): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for
AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP.
* aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind.
(FLD_SVE_prfop): Likewise.
* aarch64-opc.c: Include libiberty.h.
(aarch64_sve_pattern_array): New variable.
(aarch64_sve_prfop_array): Likewise.
(fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_enum_string): New function.
(po_enum_or_fail): New macro.
(parse_operands): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
This patch adds qualifiers to represent /z and /m suffixes on
predicate registers.
include/
* opcode/aarch64.h (AARCH64_OPND_QLF_P_Z): New aarch64_opnd_qualifier.
(AARCH64_OPND_QLF_P_M): Likewise.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): Add entries for
AARCH64_OPND_QLF_P_[ZM].
(aarch64_print_operand): Print /z and /m where appropriate.
gas/
* config/tc-aarch64.c (vector_el_type): Add NT_zero and NT_merge.
(parse_vector_type_for_operand): Assert that the skipped character
is a '.'.
(parse_predication_for_operand): New function.
(parse_typed_reg): Parse /z and /m suffixes for predicate registers.
(vectype_to_qualifier): Handle NT_zero and NT_merge.
