This updates the copyright headers to include 2025. I did this by
running gdb/copyright.py and then manually modifying a few files as
noted by the script.
Approved-By: Eli Zaretskii <eliz@gnu.org>
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
The generated mloop files can trigger compile time warnings. It can
be difficult to see/understand where the original code is coming from
as all the diagnostics point to the generated output. Using #line
pragmas, we can point people to the original source files.
Unfortunately, this code is written in POSIX shell, and that lacks
support for line number tracking. The $LINENO variable, even when
available, can just be plain wrong. For example, when using dash
and subshells, $LINENO can end up having negative values. Add a
wrapper script that will uses awk to rewrite the $LINENO variable
to the right value to avoid all that.
Basically lineno.sh takes an input script, rewrites all uses of
$LINENO into the actual line number (and $0 into the original file
name), and then executes the temporary script.
This commit doesn't actually add #line pragmas to any files. That
comes next.
Pull out the common parts of the genmloop invocation into the common
code. This will make it easier to add more, and make the per-port
differences a little more obvious.
This patch sets GUILE to just plain 'guile'.
In the distant ("devo") past, the top-level build did support building
Guile in-tree. However, I don't think this really works any more.
For one thing, there are no build dependencies on it, so there's no
guarantee it would actually be built before the uses.
This patch also removes the use of "-s" as an option to cgen scheme
scripts. With my latest patch upstream, this is no longer needed.
After the upstream changes, either Guile 2 or Guile 3 will work, with
or without the compiler enabled.
2023-08-24 Tom Tromey <tom@tromey.com>
* cgen.sh: Don't pass "-s" to cgen.
* Makefile.in: Rebuild.
* Makefile.am (GUILE): Simplify.
Now that sim-main.h has been reduced significantly, we can remove it
from sim-signal.c and unify it across all boards since it compiles to
the same code.
Now that all ports (other than ppc) build in the top-level, we don't
need to expand all the modules.c targets as a recursive dep. Each
port depends on their respective file now, and the ppc port doesn't
use it at all.
This simplifies the build logic and avoids an Automake bug where the
common_libcommon_a_OBJECTS variable isn't set in the arch libsim.a
DEPENDENCIES for targets that, alphabetically, come before "common".
We aren't affected by that bug with the current code, but as we move
things out of SIM_ALL_RECURSIVE_DEPS and rely on finer dependencies,
we will trip over it.
Now that all ports (other than ppc) build in the top-level, we don't
need to expand all the hw-config.h targets as a recursive dep. Each
port depends on their respective header now, and the ppc port doesn't
use it at all.
This is an internal developer target that isn't normally compiled,
but it can still be occasionally useful. Move it to the top-level
build so we can kill off common/Make-common.in.
The code so far has been assuming that we only compile common/ objects.
Now that we're ready to compile arch-specific objects, refactor some of
the flags & checks a bit to support both.
Now that all arches create libsim.a from the top-level, we have full
access to their inputs, and can move the actual generation from the
subdir up to the top-level. This avoids recursive makes and will
help simplify state passing between the two.
Add rules for tracking generated subdir modules.c files. This doesn't
actually generate the file from the top-level, but allows us to add
rules that need to be ordered wrt it. Once those changes land, we can
rework this to actually generate from the top-level.
This currently builds off of the objects that go into the libsim.a as
we don't build those from the top-level either. Once we migrate that
up, we can switch this to the source files directly. It's a bit hacky
overall, but makes it easier to migrate things in smaller chunks, and
we aren't going to keep this logic long term.
The rules seem to generate the same output as existing subdir cgen
rules with cgen ports, so hopefully this should be correct. These
are the last set of codegen rules that we run in subdirs, so this
will help unblock killing off subdir builds entirely.
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
In order to create libsim.a in the common dir, we need the list of
objects for each target. To avoid duplicating the list with the
recursive make in each port, pass it down as a variable. This is
a temporary hack until the top-level creates libsim.a for ports.
Automake will run each subdir individually before moving on to the next
one. This means that the linking phase, a single threaded process, will
not run in parallel with anything else. When we have to link ~32 ports,
that's 32 link steps that don't take advantage of parallel systems. On
my really old 4-core system, this cuts a multi-target build from ~60 sec
to ~30 sec. We eventually want to move all compile+link steps to this
common dir anyways, so might as well move linking now for a nice speedup.
We use noinst_PROGRAMS instead of bin_PROGRAMS because we're taking care
of the install ourselves rather than letting automake process it.
Since all host files we compile use these settings, move them out of
libcommon.a and into the default AM_CPPFLAGS. This has the effect of
dropping the custom per-target automake rules. Currently it saves us
~150 lines, but since it's about ~8 lines per object, the overhead
will increase quite a bit as we merge more files into a single build.
This also changes the object output names, so we have to tweak the
rules that were pulling in the common objects when linking.
In order to merge more common/ files into the top-level, we need to
add more host flags to CPPFLAGS, and that conflicts with our current
use with build-time tools. So split them apart like we do with all
other build flags to avoid the issue.
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
The ## marker tells automake to not include the comment in its
generated output, so use that in most places where the comment
only makes sense in the inputs.
Now that we've unified all the syscall tables, this file does not rely
on any port-specific settings, so move it up to building as part of the
common step so we only do it once in a multibuild.
Like we just did for pulling out the errno map, pull out the syscall
maps into a dedicated common file. Most newlib ports are using the
same syscall map, but not all, which means we have to do a bit more
work to migrate.
This commit adds the maps and switches the ports using the common
default syscall table over to it. Ports using unique syscall tables
are still using the old targ-map.c logic.
Switching common ports over is easy by checking NL_TARGET, but the
ppc code needs a bit more cleanup here hence its larger diff.
Like we just did for pulling out the errno & signal maps, pull out the
open flag map into a dedicated common file. All newlib ports are using
the same map which makes it easy.
Like we just did for pulling out the errno map, pull out the signal
map into a dedicated common file. All newlib ports are using the
same signal map which makes it easy.
The current system maintains a list of target errno constants in the
nltvals.def file, then runs a build-time tool to turn that into a C
file. This list of errno values is the same for all arches, so we
don't need the arch-specific flexibility. Further, these are only
for newlib/libgloss environments, which makes it confusing to support
other userland runtimes (like Linux). Let's simplify to make this
easier to understand & build. We don't namespace the variables yet,
but sets up the framework for it.
Create a new target-newlib-errno.c template file. The template file
is hand written, but the inline map is still automatically generated.
This allows us to move it to the common set of objects so it's only
built once in a multi-target build.
Now we can remove the output from the gentmap build-time tool since
it's checked into the tree.
Then we stop including the errno lists in nltvals.def since nothing
uses it.
This provides a space to generate things that we only need to build
once per-arch. Some day that will be all of common/, but for now,
we move the version.c management in.
