Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
include * dis-asm.h: Add prototypes for wasm32 disassembler.
opcodes * Makefile.am: Add wasm32-dis.c.
* configure.ac: Add wasm32-dis.c to wasm32 target.
* disassemble.c: Add wasm32 disassembler code.
* wasm32-dis.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
changes.
* testsuite/gas/wasm32/disass.d: New test.
* testsuite/gas/wasm32/disass.s: New test.
* testsuite/gas/wasm32/disass-2.d: New test.
* testsuite/gas/wasm32/disass-2.s: New test.
* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
names.
* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
syntax.
* testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn
test to succeed.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
