* reloc.c (BFD_RELOC_MIPS16_GOT16, BFD_RELOC_MIPS16_CALL16): Declare.
* libbfd.h, bfd-in2.h: Regenerate.
* elf32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_reloc_map): Add mappings.
* elf64-mips.c (mips16_elf64_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_elf64_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfn32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(elf_mips16_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfxx-mips.c (mips_elf_create_shadow_symbol): New function.
(section_allows_mips16_refs_p): Likewise.
(mips16_stub_symndx): Likewise.
(mips_elf_check_mips16_stubs): Treat the data argument as a
bfd_link_info. Mark every dynamic symbol as needing MIPS16 stubs
and create a "shadow" symbol for the original MIPS16 definition.
(mips16_reloc_p, got16_reloc_p, call16_reloc_p, hi16_reloc_p)
(lo16_reloc_p, mips16_call_reloc_p): New functions.
(_bfd_mips16_elf_reloc_unshuffle): Use mips16_reloc_p to generalize
relocation checks.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Handle R_MIPS16_GOT16.
(mips_elf_got16_entry): Add comment.
(mips_elf_calculate_relocation): Use hi16_reloc_p,
lo16_reloc_p, mips16_call_reloc_p, call16_reloc_p and got16_reloc_p
to generalize relocation checks. Use section_allows_mips16_refs_p
instead of mips16_stub_section_p. Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16, allowing the former to refer directly to a
MIPS16 function if its stub is not needed.
(mips16_stub_section_p): Delete.
(_bfd_mips_elf_symbol_processing): Convert odd-valued function
symbols into even MIPS16 symbols.
(mips_elf_add_lo16_rel_addend): Use mips16_reloc_p to generalize
a relocation check.
(_bfd_mips_elf_check_relocs): Calculate "bed" and "rel_end"
earlier in the function. Use mips16_stub_symndx to identify
the target function. Avoid out-of-bounds accesses when the
stub has no relocations; report an error instead. Use
section_allows_mips16_refs_p instead of mips16_stub_section_p.
Use mips16_call_reloc_p and got16_reloc_p to generalize relocation
checks. Handle R_MIPS16_CALL16 and R_MIPS16_GOT16. Don't create
dynamic relocations for absolute references to __gnu_local_gp.
(_bfd_mips_elf_always_size_sections): Pass a bfd_link_info as
the argument to mips_elf_check_mips16_stubs. Generalize comment.
(_bfd_mips_elf_relocate_section): Use hi16_reloc_p and got16_reloc_p
to generalize relocation checks.
(_bfd_mips_elf_finish_dynamic_symbol): If a dynamic MIPS16 function
symbol has a non-MIPS16 stub, redirect the symbol to the stub.
Fix an overly long line. Don't give dynamic symbols type STO_MIPS16.
(_bfd_mips_elf_gc_sweep_hook): Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16.
gas/
* config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
(lo16_reloc_p): New functions.
(reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
generalize relocation checks.
(matching_lo_reloc): New function.
(fixup_has_matching_lo_p): Use it.
(mips16_mark_labels): Don't clobber a symbol's visibility.
(append_insn): Use hi16_reloc_p and lo16_reloc_p.
(mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
(md_apply_fix): Likewise.
(mips16_percent_op): Add %got and %call16.
(mips_frob_file): Use got16_reloc_p to generalize relocation checks.
Use matching_lo_reloc.
(mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
generalize relocation checks.
(mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
checks.
gas/testsuite/
* gas/mips/elf-rel8-mips16.d, gas/mips/elf-rel8-mips16.s,
* gas/mips/elf-rel9-mips16.d, gas/mips/elf-rel9-mips16.s,
* gas/mips/elf-rel13-mips16.d, gas/mips/elf-rel13-mips16.s: New tests.
* gas/mips/mips.exp: Run them.
ld/testsuite/
* ld-mips-elf/mips16-local-stubs-1.d: Remove stub_for_h3,
which was only referenced by the .pdr section, and was not
actually needed by code.
* ld-mips-elf/mips16-intermix.d: Remove unused static function stubs.
* ld-mips-elf/mips16-pic-1a.s,
ld-mips-elf/mips16-pic-1b.s,
ld-mips-elf/mips16-pic-1-dummy.s,
ld-mips-elf/mips16-pic-1.dd,
ld-mips-elf/mips16-pic-1.gd,
ld-mips-elf/mips16-pic-1.inc,
ld-mips-elf/mips16-pic-1.ld,
ld-mips-elf/mips16-pic-2a.s,
ld-mips-elf/mips16-pic-2b.s,
ld-mips-elf/mips16-pic-2.ad,
ld-mips-elf/mips16-pic-2.dd,
ld-mips-elf/mips16-pic-2.gd,
ld-mips-elf/mips16-pic-2.nd,
ld-mips-elf/mips16-pic-2.rd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
(COP_INSN): New macro.
(is_opcode_valid): Use them.
(macro) <ld_st>: Use them. Don't accept coprocessor load store
insns based on the ISA if CPU is NO_ISA_COP.
<copz>: Likewise for coprocessor operations.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
* config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
with non-MIPS16 relocs.
gas/testsuite/
* gas/mips/mips16-hilo-match.s: New test.
* gas/mips/mip16-hilo-match.d: New test output.Index: config/tc-mips.c
New statics.
(OPTION_ELF_BASE): Make room for new option macros.
(OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT): New option macros.
(md_longopts): Add msoft-float, mhard-float, msingle-float and
mdouble-float.
(md_parse_option): Handle OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
(md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
and -mdouble-float.
(struct mips_set_options): New fields soft_float and single_float.
(mips_opts): Initialized them. Add comment for each field
initializer.
(mips_after_parse_args): Set them based on file_mips_soft_float
and file_mips_single_float.
(s_mipsset): Add support for `.set softfloat', `.set hardfloat',
`.set singlefloat' and `.set doublefloat'.
(is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
Handle single-float and soft-float instructions here.
(macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
(is_opcode_valid_16): New function.
(mips16_ip): Use it instead of OPCODE_IS_MEMBER.
(macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
M_S_DOB>: Remove special-casing of r4650.
* doc/c-mips.texi (-march=): Add Octeon.
(MIPS Opts): Document -msoft-float and -mhard-float. Document
-msingle-float and -mdouble-float.
(MIPS floating-point): New section. Document `.set softfloat' and
`.set hardfloat'. Document `.set singlefloat' and `.set
doublefloat'.
* config/tc-mips.h (mips_nop_opcode): Declare.
(NOP_OPCODE): Define.
(mips_segment_info): New structure.
(TC_SEGMENT_INFO_TYPE): Use it instead of insn_label_list.
* config/tc-mips.c (label_list): Adjust for new TC_SEGMENT_INFO_TYPE.
(mips_record_mips16_mode): New function.
(install_insn): Call it.
(mips_align): Likewise. Turn the fill argument into an "int *".
Use frag_align_code for code segments if no fill data is given.
(s_align): Adjust call accordingly.
(mips_nop_opcode): New function.
(mips_handle_align): Use the first variable byte to decide which
nop sequence is needed. Use md_number_to_chars and mips16_nop_insn.
gas/testsuite/
* gas/mips/align2.s, gas/mips/align2.d, gas/mips/align2-el.d: New
tests.
* gas/mips/mips.exp: Run them.
* config/tc-mips.c (AT): Rename to...
(ATREG): ... this.
(AT): New definition.
(mips_set_options): Rename "noat" to "at"; change the type.
(mips_opts): Update accordingly.
(append_insn): Likewise.
(macro_build_ldst_constoffset): Likewise.
(load_address): Likewise.
(macro, macro2): Likewise.
(s_mipsset): Handle ".set at=REG". Update handling of ".set at"
and ".set noat".
gas/testsuite/:
* gas/mips/at-1.d, gas/mips/at-2.l: New tests to check the ".set
at=REG" directive.
* gas/mips/at-1.s, gas/mips/at-2.s: Sources for the new tests.
* gas/mips/mips.exp: Run the new tests.
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* config/tc-mips.c (s_align): Set max_alignment to 28.
gas/testsuite/
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* gas/mips/align.s, gas/mips/align.d: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips_cpu_info_table): Add new entries for
{24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
Deprecate *x and *fx.
* doc/c-mips.texi: Document the new CPU arguments. Deprecate
*x and *fx.
* elfxx-mips.c (mips_elf_calculate_relocation): Allow local stubs
to be used for calls from MIPS16 code.
gas/
* config/tc-mips.h (TC_SYMFIELD_TYPE): New.
* config/tc-mips.c (append_insn): Record which symbols have
R_MIPS16_26 relocations against them.
(mips_fix_adjustable): Don't reduce relocations against such symbols.
ld/testsuite/
* ld-mips-elf/mips16-local-stubs-1.s,
* ld-mips-elf/mips16-local-stubs-1.d: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
* doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
* config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
* config/tc-mips.c (pic_need_relax): Return true for section symbols.
gas/testsuite:
* gas/mips/elf-rel26.s: New test.
* gas/mips/elf-rel26.d: Ditto.
* gas/mips/mips.exp: Run it.
