Reuse float instructions in INSN_CLASS_F/D/Q, use riscv_subset_supports to
verify if z*inx enabled and use gpr instead of fpr when z*inx is enable.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
z*inx extension.
gas/ChangeLog:
* config/tc-riscv.c (riscv_ip): Added register choice for z*inx.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): Reused INSN_CLASS_* for z*inx.
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_insn): Added disassemble check for
z*inx.
* riscv-opc.c: Reused INSN_CLASS_* for z*inx.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch is adding new SVE2 instructions added to support SME extension.
The following SVE2 instructions are added by the SME architecture:
* PSEL,
* REVD, SCLAMP and UCLAMP.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_pred_reg_with_index):
New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-9-illegal.d: New test.
* testsuite/gas/aarch64/sme-9-illegal.l: New test.
* testsuite/gas/aarch64/sme-9-illegal.s: New test.
* testsuite/gas/aarch64/sme-9.d: New test.
* testsuite/gas/aarch64/sme-9.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_PnT_Wm_imm.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
New inserter.
* aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
New extractor.
* aarch64-opc.c (aarch64_print_operand): Printout of
OPND_SME_PnT_Wm_imm.
* aarch64-opc.h (enum aarch64_field_kind): New bitfields
FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
* aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
(OP_SVE_QMQ): New qualifier.
(struct aarch64_opcode): New instructions PSEL, REVD,
SCLAMP and UCLAMP.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new SME mode selection and state access instructions:
* Add SMSTART and SMSTOP instructions.
* Add SVCR system register.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_sm_za): New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-8-illegal.d: New test.
* testsuite/gas/aarch64/sme-8-illegal.l: New test.
* testsuite/gas/aarch64/sme-8-illegal.s: New test.
* testsuite/gas/aarch64/sme-8.d: New test.
* testsuite/gas/aarch64/sme-8.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_SM_ZA.
(enum aarch64_insn_class): New instruction classes
sme_start and sme_stop.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
(aarch64_ins_sme_sm_za): New inserter.
* aarch64-dis.c (aarch64_ext_imm): New extractor.
(aarch64_ext_pstatefield): New extractor.
(aarch64_ext_sme_sm_za): New extractor.
* aarch64-opc.c (operand_general_constraint_met_p):
New pstatefield value for SME instructions.
(aarch64_print_operand): Printout for OPND_SME_SM_ZA.
(SR_SME): New register SVCR.
* aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
* aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
(PSTATE_ENCODE_CRM): Encode CRm field.
(PSTATE_DECODE_CRM): Decode CRm field.
(PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
(PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
(PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
field.
* aarch64-tbl.h (struct aarch64_opcode): New SMSTART
and SMSTOP instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new loads and stores defined by SME instructions.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_address): New parser.
(parse_sme_za_hv_tiles_operand_with_braces): New parser.
(parse_sme_za_array): New parser.
(output_operand_error_record): Print error details if
present.
(parse_operands): Support new operands.
* testsuite/gas/aarch64/sme-5-illegal.d: New test.
* testsuite/gas/aarch64/sme-5-illegal.l: New test.
* testsuite/gas/aarch64/sme-5-illegal.s: New test.
* testsuite/gas/aarch64/sme-5.d: New test.
* testsuite/gas/aarch64/sme-5.s: New test.
* testsuite/gas/aarch64/sme-6-illegal.d: New test.
* testsuite/gas/aarch64/sme-6-illegal.l: New test.
* testsuite/gas/aarch64/sme-6-illegal.s: New test.
* testsuite/gas/aarch64/sme-6.d: New test.
* testsuite/gas/aarch64/sme-6.s: New test.
* testsuite/gas/aarch64/sme-7-illegal.d: New test.
* testsuite/gas/aarch64/sme-7-illegal.l: New test.
* testsuite/gas/aarch64/sme-7-illegal.s: New test.
* testsuite/gas/aarch64/sme-7.d: New test.
* testsuite/gas/aarch64/sme-7.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands.
(enum aarch64_insn_class): Added sme_ldr and sme_str.
(AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
(aarch64_ins_sme_za_list): New inserter.
(aarch64_ins_sme_za_array): New inserter.
(aarch64_ins_sme_addr_ri_u4xvl): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
(aarch64_ext_sme_za_list): New extractor.
(aarch64_ext_sme_za_array): New extractor.
(aarch64_ext_sme_addr_ri_u4xvl): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
* aarch64-opc.c (operand_general_constraint_met_p):
(aarch64_match_operands_constraint): Handle sme_ldr, sme_str
and sme_misc.
(aarch64_print_operand): New operands supported.
* aarch64-tbl.h (OP_SVE_QUU): New qualifier.
(OP_SVE_QZU): New qualifier.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding ZERO (a list of 64-bit element ZA tiles)
instruction.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
New parser.
(parse_operands): Handle OPND_SME_list_of_64bit_tiles.
* testsuite/gas/aarch64/sme-4-illegal.d: New test.
* testsuite/gas/aarch64/sme-4-illegal.l: New test.
* testsuite/gas/aarch64/sme-4-illegal.s: New test.
* testsuite/gas/aarch64/sme-4.d: New test.
* testsuite/gas/aarch64/sme-4.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_list_of_64bit_tiles.
opcodes/ChangeLog:
* aarch64-opc.c (print_sme_za_list): New printing function.
(aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
* aarch64-opc.h (enum aarch64_field_kind): New bitfield
FLD_SME_zero_mask.
* aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new MOV (alias) and MOVA SME instruction.
gas/ChangeLog:
* config/tc-aarch64.c (enum sme_hv_slice): new enum.
(struct reloc_entry): Added ZAH and ZAV registers.
(parse_sme_immediate): Immediate parser.
(parse_sme_za_hv_tiles_operand): ZA tile parser.
(parse_sme_za_hv_tiles_operand_index): Index parser.
(parse_operands): Added ZA tile parser calls.
(REGNUMS): New macro. Regs with suffix.
(REGSET16S): New macro. 16 regs with suffix.
* testsuite/gas/aarch64/sme-2-illegal.d: New test.
* testsuite/gas/aarch64/sme-2-illegal.l: New test.
* testsuite/gas/aarch64/sme-2-illegal.s: New test.
* testsuite/gas/aarch64/sme-2.d: New test.
* testsuite/gas/aarch64/sme-2.s: New test.
* testsuite/gas/aarch64/sme-2a.d: New test.
* testsuite/gas/aarch64/sme-2a.s: New test.
* testsuite/gas/aarch64/sme-3-illegal.d: New test.
* testsuite/gas/aarch64/sme-3-illegal.l: New test.
* testsuite/gas/aarch64/sme-3-illegal.s: New test.
* testsuite/gas/aarch64/sme-3.d: New test.
* testsuite/gas/aarch64/sme-3.s: New test.
* testsuite/gas/aarch64/sme-3a.d: New test.
* testsuite/gas/aarch64/sme-3a.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New enums
AARCH64_OPND_SME_ZA_HV_idx_src and
AARCH64_OPND_SME_ZA_HV_idx_dest.
(struct aarch64_opnd_info): New ZA tile vector struct.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
New inserter ins_sme_za_hv_tiles.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
New extractor ext_sme_za_hv_tiles.
* aarch64-opc.c (aarch64_print_operand):
Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
* aarch64-opc.h (enum aarch64_field_kind): New enums
FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
(struct aarch64_operand): Increase fields size to 5.
* aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Patch is adding new SME matrix instructions. Please note additional
instructions will be added in following patches.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_zada_operand):
New parser.
* config/tc-aarch64.c (parse_reg_with_qual):
New reg parser.
* config/tc-aarch64.c (R_ZA): New egister type.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-illegal.d: New test.
* testsuite/gas/aarch64/sme-illegal.l: New test.
* testsuite/gas/aarch64/sme-illegal.s: New test.
* testsuite/gas/aarch64/sme.d: New test.
* testsuite/gas/aarch64/sme.s: New test.
* testsuite/gas/aarch64/sme-f64.d: New test.
* testsuite/gas/aarch64/sme-f64.s: New test.
* testsuite/gas/aarch64/sme-i64.d: New test.
* testsuite/gas/aarch64/sme-i64.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands
AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
AARCH64_OPND_SME_Pm.
(enum aarch64_insn_class): New instruction class sme_misc.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_print_operand):
Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
(verify_constraints): Handle OPND_SME_Pm.
* aarch64-opc.h (enum aarch64_field_kind):
New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
* aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
(OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
(OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
(OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
(OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
(OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
(OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
(OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
(SME_INSN): New instruction macro.
(SME_F64_INSN): New instruction macro.
(SME_I64_INSN): New instruction macro.
(SME_INSNC): New instruction macro.
(struct aarch64_opcode): New SME instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This series of patches (tagged [SME]) add support for the Scalable
Matrix Extension. Patch introduces new command line options: +sme, +sme-f64 and
+sme-i64 to -march command line options.
gas/ChangeLog:
* NEWS: Updated docs.
* config/tc-aarch64.c: New SME command line options.
* doc/c-aarch64.texi: Update docs.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_FEATURE_SME): New flag.
(AARCH64_FEATURE_SME_F64): New flag.
(AARCH64_FEATURE_SME_I64): New flag.
opcodes/ChangeLog:
* aarch64-tbl.h (SME): New feature object.
2021-11-17 Jim Wilson <jimw@sifive.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
This patch is porting from the following riscv github,
https://github.com/riscv/riscv-binutils-gdb/tree/rvv-1.0.x
And here is the vector spec,
https://github.com/riscv/riscv-v-spec
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Added imply rules
of v, zve and zvl extensions.
(riscv_supported_std_ext): Updated verison of v to 1.0.
(riscv_supported_std_z_ext): Added zve and zvl extensions.
(riscv_parse_check_conflicts): The zvl extensions need to
enable either v or zve extension.
(riscv_multi_subset_supports): Check the subset list to know
if the INSN_CLASS_V and INSN_CLASS_ZVEF instructions are supported.
gas/
* config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_V.
(enum reg_class): Added RCLASS_VECR and RCLASS_VECM.
(validate_riscv_insn): Check whether the rvv operands are valid.
(md_begin): Initialize register hash for rvv registers.
(macro_build): Added rvv operands when expanding rvv pseudoes.
(vector_macro): Expand rvv macros into one or more instructions.
(macro): Likewise.
(my_getVsetvliExpression): Similar to my_getVsetvliExpression,
but used for parsing vsetvli operands.
(riscv_ip): Parse and encode rvv operands. Besides, The rvv loads
and stores with EEW 64 cannot be used when zve32x is enabled.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated -march
to rv32ifv_zkr.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg.s: Added rvv csr testcases.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/march-imply-v.d: New testcase.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.l: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.l: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.d: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.s: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.d: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.s: Likewise.
* testsuite/gas/riscv/vector-insns.d: Likewise.
* testsuite/gas/riscv/vector-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Defined mask/match encodings and csrs for rvv.
* opcode/riscv.h: Defined rvv immediate encodings and fields.
(enum riscv_insn_class): Added INSN_CLASS_V and INSN_CLASS_ZVEF.
(INSN_V_EEW64): Defined.
(M_VMSGE, M_VMSGEU): Added for the rvv pseudoes.
opcodes/
* riscv-dis.c (print_insn_args): Dump the rvv operands.
* riscv-opc.c (riscv_vecr_names_numeric): Defined rvv registers.
(riscv_vecm_names_numeric): Likewise.
(riscv_vsew): Likewise.
(riscv_vlmul): Likewise.
(riscv_vta): Likewise.
(riscv_vma): Likewise.
(match_vs1_eq_vs2): Added for rvv Vu operand.
(match_vd_eq_vs1_eq_vs2): Added for rvv Vv operand.
(riscv_opcodes): Added rvv v1.0 instructions.
Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from
zbb,zbc, we just change the class attribute to make them both support.
The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd
and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs'
symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add
a new Entropy Source CSR define 'seed' located at address 0x015.
bfd/
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
crypto extension.
gas/
*config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR.
(riscv_csr_address): Checked for CSR_CLASS_ZKR.
(validate_riscv_insn): Added y and Y for bs and rnum operands.
(riscv_ip): Handle y and Y operands.
include/
* opcode/riscv-opc.h: Added encodings of crypto instructions.
Also defined new csr seed, which address is 0x15.
* opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto.
opcodes/
* riscv-dis.c (print_insn_args): Recognized new y and Y operands.
* riscv-opc.c (riscv_opcodes): Added crypto instructions.
Patch is adding new 'armv9-a` command line flag to -march for AArch64.
gas/
* config/tc-aarch64.c: Add 'armv9-a' command line flag.
* docs/c-aarch64.text: Update docs.
* NEWS: Update docs.
include/
* opcode/aarch64.h (AARCH64_FEATURE_V9): New define.
(AARCH64_ARCH_V9): New define.
Similar to ARM/AARCH64, we add mapping symbols in the symbol table,
to mark the start addresses of data and instructions. The $d means
data, and the $x means instruction. Then the disassembler uses these
symbols to decide whether we should dump data or instruction.
Consider the mapping-04 test case,
$ cat tmp.s
.text
.option norelax
.option norvc
.fill 2, 4, 0x1001
.byte 1
.word 0
.balign 8
add a0, a0, a0
.fill 5, 2, 0x2002
add a1, a1, a1
.data
.word 0x1 # No need to add mapping symbols.
.word 0x2
$ riscv64-unknown-elf-as tmp.s -o tmp.o
$ riscv64-unknown-elf-objdump -d tmp.o
Disassembly of section .text:
0000000000000000 <.text>:
0: 00001001 .word 0x00001001 # Marked $d, .fill directive.
4: 00001001 .word 0x00001001
8: 00000001 .word 0x00000001 # .byte + part of .word.
c: 00 .byte 0x00 # remaining .word.
d: 00 .byte 0x00 # Marked $d, odd byte of alignment.
e: 0001 nop # Marked $x, nops for alignment.
10: 00a50533 add a0,a0,a0
14: 20022002 .word 0x20022002 # Marked $d, .fill directive.
18: 20022002 .word 0x20022002
1c: 2002 .short 0x2002
1e: 00b585b3 add a1,a1,a1 # Marked $x.
22: 0001 nop # Section tail alignment.
24: 00000013 nop
* Use $d and $x to mark the distribution of data and instructions.
Alignments of code are recognized as instructions, since we usually
fill nops for them.
* If the alignment have odd bytes, then we cannot just fill the nops
into the spaces. We always fill an odd byte 0x00 at the start of
the spaces. Therefore, add a $d mapping symbol for the odd byte,
to tell disassembler that it isn't an instruction. The behavior
is same as Arm and Aarch64.
The elf/linux toolchain regressions all passed. Besides, I also
disable the mapping symbols internally, but use the new objudmp, the
regressions passed, too. Therefore, the new objudmp should dump
the objects corretly, even if they don't have any mapping symbols.
bfd/
pr 27916
* cpu-riscv.c (riscv_elf_is_mapping_symbols): Define mapping symbols.
* cpu-riscv.h: extern riscv_elf_is_mapping_symbols.
* elfnn-riscv.c (riscv_maybe_function_sym): Do not choose mapping
symbols as a function name.
(riscv_elf_is_target_special_symbol): Add mapping symbols.
binutils/
pr 27916
* testsuite/binutils-all/readelf.s: Updated.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/readelf.s-64-unused: Likewise.
* testsuite/binutils-all/readelf.ss: Likewise.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
gas/
pr 27916
* config/tc-riscv.c (make_mapping_symbol): Create a new mapping symbol.
(riscv_mapping_state): Decide whether to create mapping symbol for
frag_now. Only add the mapping symbols to text sections.
(riscv_add_odd_padding_symbol): Add the mapping symbols for the
riscv_handle_align, which have odd bytes spaces.
(riscv_check_mapping_symbols): Remove any excess mapping symbols.
(md_assemble): Marked as MAP_INSN.
(riscv_frag_align_code): Marked as MAP_INSN.
(riscv_init_frag): Add mapping symbols for frag, it usually called
by frag_var. Marked as MAP_DATA for rs_align and rs_fill, and
marked as MAP_INSN for rs_align_code.
(s_riscv_insn): Marked as MAP_INSN.
(riscv_adjust_symtab): Call riscv_check_mapping_symbols.
* config/tc-riscv.h (md_cons_align): Defined to riscv_mapping_state
with MAP_DATA.
(TC_SEGMENT_INFO_TYPE): Record mapping state for each segment.
(TC_FRAG_TYPE): Record the first and last mapping symbols for the
fragments. The first mapping symbol must be placed at the start
of the fragment.
(TC_FRAG_INIT): Defined to riscv_init_frag.
* testsuite/gas/riscv/mapping-01.s: New testcase.
* testsuite/gas/riscv/mapping-01a.d: Likewise.
* testsuite/gas/riscv/mapping-01b.d: Likewise.
* testsuite/gas/riscv/mapping-02.s: Likewise.
* testsuite/gas/riscv/mapping-02a.d: Likewise.
* testsuite/gas/riscv/mapping-02b.d: Likewise.
* testsuite/gas/riscv/mapping-03.s: Likewise.
* testsuite/gas/riscv/mapping-03a.d: Likewise.
* testsuite/gas/riscv/mapping-03b.d: Likewise.
* testsuite/gas/riscv/mapping-04.s: Likewise.
* testsuite/gas/riscv/mapping-04a.d: Likewise.
* testsuite/gas/riscv/mapping-04b.d: Likewise.
* testsuite/gas/riscv/mapping-norelax-04a.d: Likewise.
* testsuite/gas/riscv/mapping-norelax-04b.d: Likewise.
* testsuite/gas/riscv/no-relax-align.d: Updated.
* testsuite/gas/riscv/no-relax-align-2.d: Likewise.
include/
pr 27916
* opcode/riscv.h (enum riscv_seg_mstate): Added.
opcodes/
pr 27916
* riscv-dis.c (last_map_symbol, last_stop_offset, last_map_state):
Added to dump sections with mapping symbols.
(riscv_get_map_state): Get the mapping state from the symbol.
(riscv_search_mapping_symbol): Check the sorted symbol table, and
then find the suitable mapping symbol.
(riscv_data_length): Decide which data size we should print.
(riscv_disassemble_data): Dump the data contents.
(print_insn_riscv): Handle the mapping symbols.
(riscv_symbol_is_valid): Marked mapping symbols as invalid.
Although the XScale and its iwMMX extensions are implemented in the
Arm co-processor space, they are not considered to be part of the FPU
specification. In particular, they cannot be enabled or disabled via
a .fpu directive. It's therefore incorrect to strip these properties
when a new .fpu directive is encountered.
Note that the legacy Maverick co-processor is considered to be a FPU
and it is possible to control this via the .fpu directive.
include:
PR gas/28031
* opcode/arm.h (FPU_ANY): Exclude XScale-related features.
Remove the hack used for MIPSr6 ISA exclusion from `cpu_is_member' and
handle the exclusion for any ISA levels properly in `opcode_is_member'.
Flatten the structure of the `if' statements there. No functional
change for the existing opcode tables.
include/
* opcode/mips.h (cpu_is_member): Remove code for MIPSr6 ISA
exclusion.
(opcode_is_member): Handle ISA level exclusion.
In preparation for the next change factor out code for ISA matching
against instruction flags used in MIPS opcode tables, similarly to how
CPU matching is already done. No functional change, though for clarity
split the single `if' statement into multiple ones and use temporaries
rather than repeated expressions.
include/
* opcode/mips.h (isa_is_member): New inline function, factored
out from...
(opcode_is_member): ... here.
The CP0 control register set has never been defined, however encodings
for the CFC0 and CTC0 instructions remained available for implementers
up until the MIPS32 ISA declared them invalid and causing the Reserved
Instruction exception[1]. Therefore we handle them for both assembly
and disassembly, however in the latter case the names of CP0 registers
from the regular set are incorrectly printed if named registers are
requested. This is because we do not define separate operand classes
for coprocessor regular and control registers respectively, which means
the disassembler has no way to tell the two cases apart. Consequently
nonsensical disassembly is produced like:
cfc0 v0,c0_random
Later the MIPSr5 ISA reused the encodings for XPA ASE MFHC0 and MTHC0
instructions[2] although it failed to document them in the relevant
opcode table until MIPSr6 only.
Correct the issue then by defining a new register class, OP_REG_CONTROL,
and corresponding operand codes, `g' and `y' for the two positions in
the machine instruction a control register operand can take. Adjust the
test cases affected accordingly.
While at it swap the regular MIPS opcode table "cfc0" and "ctc0" entries
with each other so that they come in the alphabetical order.
References:
[1] "MIPS32 Architecture For Programmers, Volume II: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 1.00, August 29, 2002, Table A-9 "MIPS32 COP0 Encoding of
rs Field", p. 242
[2] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Section 3.2 "Alphabetical List of
Instructions", pp. 195, 216
include/
* opcode/mips.h: Document `g' and `y' operand codes.
(mips_reg_operand_type): Add OP_REG_CONTROL enumeration
constant.
gas/
* tc-mips.c (convert_reg_type) <OP_REG_CONTROL>: New case.
(macro) <M_TRUNCWS, M_TRUNCWD>: Use the `g' rather than `G'
operand code.
opcodes/
* mips-dis.c (print_reg) <OP_REG_COPRO>: Move control register
handling code over to...
<OP_REG_CONTROL>: ... this new case.
* mips-opc.c (decode_mips_operand) <'g', 'y'>: New cases.
(mips_builtin_opcodes): Update "cfc1", "ctc1", "cttc1", "cttc2",
"cfc0", "ctc0", "cfc2", "ctc2", "cfc3", and "ctc3" entries
replacing the `G' operand code with `g'. Update "cftc1" and
"cftc2" entries replacing the `E' operand code with `y'.
* micromips-opc.c (decode_micromips_operand) <'g'>: New case.
(micromips_opcodes): Update "cfc1", "cfc2", "ctc1", and "ctc2"
entries replacing the `G' operand code with `g'.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: Correct CFC0
operand disassembly.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: Likewise.
In the operand handling rewrite made for the MIPS disassembler with
commit ab90248154 ("Add structures to describe MIPS operands"),
<https://sourceware.org/ml/binutils/2013-07/msg00135.html>, the `g'
operand code has become redundant for the regular MIPS instruction set
by duplicating the OP_REG_COPRO semantics of the `G' operand code.
Later commit 351cdf24d2 ("Implement O32 FPXX, FP64 and FP64A ABI
extensions") converted the CTTC1 instruction from the `g' to the `G'
operand code, but still left a few instructions behind.
Convert the three remaining instructions still using the `g' code then,
namely: CTTC2, MTTC2 and MTTHC2, and remove all traces of the operand
code, freeing it up for other use.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Switch "cttc2", "mttc2",
and "mtthc2" to using the `G' rather than `g' operand code for
the coprocessor control register referred.
include/
* opcode/mips.h: Complement change made to opcodes and remove
references to the `g' regular MIPS ISA operand code.
Make the opcode/riscv-opc.c and include/opcode/riscv.h tidy, move the
spec versions stuff to bfd/cpu-riscv.h. Also move the csr stuff and
ext_version_table to gas/config/tc-riscv.c for internal use. To avoid
too many repeated code, define general RISCV_GET_SPEC_NAME/SPEC_CLASS
macros. Therefore, assembler/dis-assembler/linker/gdb can get all spec
versions related stuff from cpu-riscv.h and cpu-riscv.c, since the stuff
are defined there uniformly.
bfd/
* Makefile.am: Added cpu-riscv.h.
* Makefile.in: Regenerated.
* po/SRC-POTFILES.in: Regenerated.
* cpu-riscv.h: Added to support spec versions controlling.
Also added extern arrays and functions for cpu-riscv.c.
(enum riscv_spec_class): Define all spec classes here uniformly.
(struct riscv_spec): Added for all specs.
(RISCV_GET_SPEC_CLASS): Added to reduce repeated code.
(RISCV_GET_SPEC_NAME): Likewise.
(RISCV_GET_ISA_SPEC_CLASS): Added to get ISA spec class.
(RISCV_GET_PRIV_SPEC_CLASS): Added to get privileged spec class.
(RISCV_GET_PRIV_SPEC_NAME): Added to get privileged spec name.
* cpu-riscv.c (struct priv_spec_t): Replaced with struct riscv_spec.
(riscv_get_priv_spec_class): Replaced with RISCV_GET_PRIV_SPEC_CLASS.
(riscv_get_priv_spec_name): Replaced with RISCV_GET_PRIV_SPEC_NAME.
(riscv_priv_specs): Moved below.
(riscv_get_priv_spec_class_from_numbers): Likewise, updated.
(riscv_isa_specs): Moved from include/opcode/riscv.h.
* elfnn-riscv.c: Included cpu-riscv.h.
(riscv_merge_attributes): Initialize in_priv_spec and out_priv_spec.
* elfxx-riscv.c: Included cpu-riscv.h and opcode/riscv.h.
(RISCV_UNKNOWN_VERSION): Moved from include/opcode/riscv.h.
* elfxx-riscv.h: Removed extern functions to cpu-riscv.h.
gas/
* config/tc-riscv.c: Included cpu-riscv.h.
(enum riscv_csr_clas): Moved from include/opcode/riscv.h.
(struct riscv_csr_extra): Likewise.
(struct riscv_ext_version): Likewise.
(ext_version_table): Moved from opcodes/riscv-opc.c.
(default_isa_spec): Updated type to riscv_spec_class.
(default_priv_spec): Likewise.
(riscv_set_default_isa_spec): Updated.
(init_ext_version_hash): Likewise.
(riscv_init_csr_hash): Likewise, also fixed indent.
include/
* opcode/riscv.h: Moved stuff and make the file tidy.
opcodes/
* riscv-dis.c: Included cpu-riscv.h, and removed elfxx-riscv.h.
(default_priv_spec): Updated type to riscv_spec_class.
(parse_riscv_dis_option): Updated.
* riscv-opc.c: Moved stuff and make the file tidy.
opcodes/
* s390-mkopc.c (main): Accept arch14 as cpu string.
* s390-opc.txt: Add new arch14 instructions.
include/
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH14.
gas/
* config/tc-s390.c (s390_parse_cpu): New entry for arch14.
* doc/c-s390.texi: Document arch14 march option.
* testsuite/gas/s390/s390.exp: Run the arch14 related tests.
* testsuite/gas/s390/zarch-arch14.d: New test.
* testsuite/gas/s390/zarch-arch14.s: New test.
bfd/
* elfnn-riscv.c: Indent, labels and GNU coding standards tidy,
also aligned the code.
gas/
* config/tc-riscv.c: Indent and GNU coding standards tidy,
also aligned the code.
* config/tc-riscv.h: Likewise.
include/
* opcode/riscv.h: Indent and GNU coding standards tidy,
also aligned the code.
opcodes/
* riscv-opc.c (riscv_gpr_names_abi): Aligned the code.
(riscv_fpr_names_abi): Likewise.
(riscv_opcodes): Likewise.
(riscv_insn_types): Likewise.
The GNU coding standards said the comments should be complete sentences
and end with a period and two spaces. But sometimes it should be more
cleaner when the comments only include a word or codes. Therefore, I made
the following changes after referring to other target/generic codes,
* Try to write sentences in comments, must end with a period and two spaces.
* End with two spaces without a period for codes/instructions only.
* End with one space without a period for a single word/variable only.
Besids, also rewrite/remove some comments which are obsolete or too long,
and fix indents for comments.
bfd/
* elfnn-riscv.c: Comments tidy and improvement.
* elfxx-riscv.c: Likewise.
* elfxx-riscv.h: Likewise.
gas/
* config/tc-riscv.c: Comments tidy and improvement. Also update
comment "fallthru" to "Fall through" that end with a period and
two spaces.
include/
* elf/riscv.h: Comments tidy and improvement.
* opcode/riscv-opc.h: Likewise.
* opcode/riscv.h: Likewise.
opcodes/
* riscv-dis.c: Comments tidy and improvement.
* riscv-opc.c: Likewise.
Add support for the pause hint instruction, as specified in the
Zihintpause extension. The pause instruction is encoded as a
special form of a memory fence (which is available as part of the
base instruction set). The chosen encoding does not mandate any
particular memory ordering and therefore is a true hint.
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zihintpause.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Added
INSN_CLASS_ZIHINTPAUSE.
* testsuite/gas/riscv/pause.d: New testcase. Adding coverage for
the pause hint instruction.
* testsuite/gas/riscv/pause.s: Likewise.
include/
* opcode/riscv-opc.h: Added MATCH_PAUSE, MASK_PAUSE and DECLARE_INSN
for pause hint instruction.
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZIHINTPAUSE.
opcodes/
* riscv-opc.c (riscv_opcodes): Add pause hint instruction.
In fact rev8/orc.b/zext.h are the aliases of grevi/gorci/pack[w], so we
should update them to INSN_ALIAS when we have supported their true instruction
in the future. Though we still use the [MATCH|MAKS]_[GREVI|GORCI|PACK|PACKW]
to encode them. Besides, the orc.b has the same encoding both in rv32 and
rv64, so we just keep one of them in the opcode table.
This patch is implemented according to the following link,
https://github.com/riscv/riscv-bitmanip/pull/101
2021-01-07 Claire Xenia Wolf <claire@symbioticeda.com>
Jim Wilson <jimw@sifive.com>
Andrew Waterman <andrew@sifive.com>
Maxim Blinov <maxim.blinov@embecosm.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zba, zbb and zbc.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZB*.
(riscv_get_default_ext_version): Do not check the default_isa_spec when
the version defined in the riscv_opcodes table is ISA_SPEC_CLASS_DRAFT.
* testsuite/gas/riscv/bitmanip-insns-32.d: New testcase.
* testsuite/gas/riscv/bitmanip-insns-64.d: Likewise.
* testsuite/gas/riscv/bitmanip-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Added MASK/MATCH/DECLARE_INSN for ZBA/ZBB/ZBC.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_ZB*.
(enum riscv_isa_spec_class): Added ISA_SPEC_CLASS_DRAFT for the
frozen extensions.
opcodes/
* riscv-opc.c (riscv_opcodes): Add ZBA/ZBB/ZBC instructions.
(MASK_RVB_IMM): Used for rev8 and orc.b encoding.
https://github.com/riscv/riscv-asm-manual/pull/61
We aleady have sext.w, so just add sext.b, sext.h, zext.b, zext.h
and zext.w. In a certain sense, zext.b is not a pseudo - It is an
alias of andi. Similarly, sext.b and sext.h are aliases of other
rvb instructions, when we enable b extension; But they are pseudos
when we just enable rvi. However, this patch does not consider the
rvb cases. Besides, zext.w is only valid in rv64.
gas/
* config/tc-riscv.c (riscv_ext): New function. Use md_assemblef
to expand the zext and sext pseudos, to give them a chance to be
expanded into c-ext instructions.
(macro): Handle M_ZEXTH, M_ZEXTW, M_SEXTB and M_SEXTH.
* testsuite/gas/riscv/ext.s: New testcase.
* testsuite/gas/riscv/ext-32.d: Likewise.
* testsuite/gas/riscv/ext-64.d: Likewise.
include/
* opcode/riscv.h (M_ZEXTH, M_ZEXTW, M_SEXTB, M_SEXTH.): Added.
opcodes/
* riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw].
bfd/
* elfxx-riscv.c (riscv_ext_dont_care_version): New function. Return
TRUE if we don't care the versions of the extensions. These extensions
are added to the subset list for special purposes, with the explicit
versions or the RISCV_UNKNOWN_VERSION versions.
(riscv_parse_add_subset): If we do care the versions of the extension,
and the versions are unknown, then report errors for the non-implicit
extensions, and return directly for the implicit one.
(riscv_arch_str1): Do not output i extension after e, and the extensions
which versions are unknown.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZICSR
and INSN_CLASS_ZIFENCEI.
* testsuite/gas/riscv/march-imply-i.s: New testcase.
* testsuite/gas/riscv/march-imply-i2p0-01.d: New testcase. The version
of i is less than 2.1, and zi* are supported in the chosen spec, so
enable the fence.i and csr instructions, also output the implicit zi* to
the arch string.
* testsuite/gas/riscv/march-imply-i2p0-02.d: Likewise, but the zi* are
not supported in the spec 2.2. Enable the related instructions since
i's version is less than 2.1, but do not output them.
* testsuite/gas/riscv/march-imply-i2p1-01.d: New testcase. The version
of i is 2.1, so don't add it's implicit zi*, and disable the related
instructions.
* testsuite/gas/riscv/march-imply-i2p1-01.l: Likewise.
* testsuite/gas/riscv/march-imply-i2p1-02.d: Likewise, and set the zi*
explicitly, so enable the related instructions.
* testsuite/gas/riscv/march-imply-i2p0.d: Removed.
* testsuite/gas/riscv/march-imply-i2p1.d: Removed.
include/
* opcode/riscv.h: Add INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI.
opcodes/
* riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by
zifencei and zicsr.
G is a special case, consider the ISA spec github issue as follows,
https://github.com/riscv/riscv-isa-manual/issues/575
My understand is that - i, m, a, f and d extensions are not g's implicit
extensions, they are g's expansions. The zifencei is the implicit extension
of g, and so is zicsr, since it is implicited by f (or i2p1). However,
we add the g with the RISCV_UNKNOWN_VERSION to the subset list, and it
will not output to the arch string, it is only used to check what implicit
extensions are need to be added.
bfd/
* elfxx-riscv.c (riscv_parse_add_subset): Allow to add g with
RISCV_UNKNOWN_VERSION versions.
(riscv_parse_std_ext): Add g to the subset list, we only use it
to add the implicit extensions, but won't output it to arch string.
(riscv_parse_add_implicit_subsets): Add implicit zicsr and zifencei
for g extension.
(riscv_arch_str1): Do not output g to the arch string.
* elfxx-riscv.h (RISCV_UNKNOWN_VERSION): Moved to include/opcode/riscv.h.
gas/
* testsuite/gas/riscv/attribute-10.d: Updated.
* testsuite/gas/riscv/march-imply-g.d: New testcase for g.
* testsuite/gas/riscv/march-imply-unsupported.d: The zicsr and zifencei
are not supported in the ISA spec v2.2, so don't add and output them.
include/
* opcode/riscv.h (RISCV_UNKNOWN_VERSION): added.
Keep the riscv_add_subset to do the same thing, and use a new
function, riscv_parse_add_subset, to cover most of the things
when parsing, including find the default versions for extensions,
and check whether the versions are valid. The version 0p0 should
be an invalid version, that is the mistake I made before. This
patch clarify the version rules as follows,
* We accept any version of extensions set by users, except 0p0.
* The non-standard x extensions must be set with versions in arch string.
* If user don't set the versions, or set 0p0 for the extensions, then try
to find the supported versions according to the chosen ISA spec.
Otherwise, report errors rather than output 0p0 for them.
Besides, we use as_bad rather than as_fatal to report more errors
for assembler.
bfd/
* elfxx-riscv.c (riscv_lookup_subset): Moved to front.
(riscv_add_subset): Likewise.
(riscv_release_subset_list): Likewise.
(riscv_parse_add_subset): New function. Find and check the
versions before adding them by riscv_add_subset.
(riscv_parsing_subset_version): Remove use_default_version
and change the version type from unsigned to int. Set the
versions to RISCV_UNKNOWN_VERSION if we can not find them
in the arch string.
(riscv_parse_std_ext): Updated.
(riscv_parse_prefixed_ext): Updated. Since we use as_bad
rather than as_fatal to report more errors, return NULL
string if the parsed end_of_version is NULL, too.
(riscv_parse_subset): Use a new boolean, no_conflict, to
report more errors when we have more than one ISA conflicts.
* elfxx-riscv.h (RISCV_DONT_CARE_VERSION): Changed to
RISCV_UNKNOWN_VERSION.
(riscv_lookup_subset_version): Removed.
(riscv_parse_subset_t): Updated.
gas/
* config/tc-riscv.c (riscv_get_default_ext_version):
Change the version type from unsigned to int.
(riscv_set_arch): Use as_bad rather than as_fatal to
report more errors.
* testsuite/gas/riscv/attribute-02.d: Updated since x must be
set with versions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/march-ok-two-nse.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: zicsr wasn't supported
in the spec 2.2, so choose the newer spec.
* testsuite/gas/riscv/march-fail-base-01.l: Updated since as_bad.
* testsuite/gas/riscv/march-fail-base-02.l: Likewise.
* testsuite/gas/riscv/march-fail-order-std.l: Likewise.
* testsuite/gas/riscv/march-fail-order-x.l: Likewise.
* testsuite/gas/riscv/march-fail-order-z.l: Likewise.
* testsuite/gas/riscv/march-fail-porder.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32ef.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32id.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32iq.l: Likewise.
* testsuite/gas/riscv/march-fail-rv64iq.l: Likewise.
* testsuite/gas/riscv/march-fail-single-char.l: Likewise.
* testsuite/gas/riscv/march-fail-unknown-std.l: Likewise.
* testsuite/gas/riscv/march-fail-unknown.l: Likewise.
* testsuite/gas/riscv/march-fail-uppercase.l: Likewise.
* testsuite/gas/riscv/march-fail-version.l: Likewise.
* testsuite/gas/riscv/march-fail-isa-spec.d: Likewise.
* testsuite/gas/riscv/march-fail-isa-spec.l: Likewise.
include/
* opcode/riscv.h (riscv_ext_version):
Change the version type from unsigned to int.
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
New -march option +flagm is added to enable independently this
feature.
include * opcode/pru.h: Add LMBD (left-most bit detect) opcode index
opcodes * pru-opc.c: Add opcode description for LMBD (left-most bit detect)
gas * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit detect)
* testsuite/gas/pru/misc.d: Add tests for lmbd (left-most bit
