Some components of GNU Binutils will pass "-Wstack-usage=262144" when
"GCC >= 5.0" is detected. However, Clang does not support "-Wstack-usage",
despite that related configuration part in bfd/warning.m4 handles the latest
Clang (15.0.0 as of this writing) as "GCC >= 5.0".
The option "-Wstack-usage" was ignored when the first version of Clang is
released but even this "ignoring" behavior is removed before Clang 4.0.0.
So, if we give Clang "-Wstack-usage=262144", it generates a warning, making
the build failure.
This commit checks "__clang__" macro to prevent adding the option if the
compiler is identified as Clang.
bfd/ChangeLog:
* warning.m4: Stop appending "-Wstack-usage=262144" option when
compiled with Clang.
* configure: Regenerate.
binutils/ChangeLog:
* configure: Regenerate.
gas/ChangeLog:
* configure: Regenerate.
gold/ChangeLog:
* configure: Regenerate.
gprof/ChangeLog:
* configure: Regenerate.
ld/ChangeLog:
* configure: Regenerate.
opcodes/ChangeLog:
* configure: Regenerate.
The -mfuture and -Mfuture options which are used for adding potential
new ISA instructions were not documented. They also lacked a bitmask
so new instructions could not be enabled by those options. Fixed.
binutils/
* doc/binutils.texi: Document -Mfuture.
gas/
* config/tc-ppc.c: Document -mfuture
* doc/c-ppc.texi: Likewise.
include/
* opcode/ppc.h (PPC_OPCODE_FUTURE): Define.
opcodes/
* ppc-dis.c (ppc_opts) <future>: Use it.
* ppc-opc.c (FUTURE): Define.
While PR binutils/29483 has now been addressed differently, this
originally proposed change still has its merits: Avoiding vsnprintf()
for typically far more than half of the overall output results in a 2-3%
performance gain in my testing (with debug builds of objdump, libbfd,
and libopcodes).
With that part of output no longer using staging_area[], the array also
doesn't need to be quite as large anymore (the largest presently used
size is 27, from "64-bit address is disabled").
While limiting the scope of "res" it became apparent that
- no caller cares about the function's return value,
- the comment about the return value was wrong,
- a particular positive return value would have been meaningless to the
caller.
Therefore convert the function to return "void" at the same time.
This is paired with "gdb: Add non-enum disassembler options".
There is a portable mechanism for disassembler options and used on some
architectures:
- ARC
- Arm
- MIPS
- PowerPC
- RISC-V
- S/390
However, it only supports following forms:
- [NAME]
- [NAME]=[ENUM_VALUE]
Valid values for [ENUM_VALUE] must be predefined in
disasm_option_arg_t.values. For instance, for -M cpu=[CPU] in ARC
architecture, opcodes/arc-dis.c builds valid CPU model list from
include/elf/arc-cpu.def.
In this commit, it adds following format:
- [NAME]=[ARBITRARY_VALUE] (cannot contain "," though)
This is identified by NULL value of disasm_option_arg_t.values
(normally, this is a non-NULL pointer to a NULL-terminated list).
include/ChangeLog:
* dis-asm.h (disasm_option_arg_t): Update comment of values
to allow non-enum disassembler options.
opcodes/ChangeLog:
* riscv-dis.c (print_riscv_disassembler_options): Support
non-enum disassembler options on printing disassembler help.
* arc-dis.c (print_arc_disassembler_options): Likewise.
* mips-dis.c (print_mips_disassembler_options): Likewise.
This patch makes possible to print the highest address (-1) and the addresses
related to gp which value is -1. This is particularly useful if the highest
address space is used for I/O registers and corresponding symbols are defined.
Besides, despite that it is very rare to have GP the highest address, it would
be nice because we enabled highest address printing on regular cases.
gas/ChangeLog:
* testsuite/gas/riscv/dis-addr-topaddr.s: New test for the top
address (-1) printing.
* testsuite/gas/riscv/dis-addr-topaddr-32.d: Likewise.
* testsuite/gas/riscv/dis-addr-topaddr-64.d: Likewise.
* testsuite/gas/riscv/dis-addr-topaddr-gp.s: New test for
GP-relative addressing when GP is the highest address (-1).
* testsuite/gas/riscv/dis-addr-topaddr-gp-32.d: Likewise.
* testsuite/gas/riscv/dis-addr-topaddr-gp-64.d: Likewise.
opcodes/ChangeLog:
* riscv-dis.c (struct riscv_private_data): Add `to_print_addr' to
enable printing the highest address.
(maybe_print_address): Utilize `to_print_addr'.
(riscv_disassemble_insn): Likewise.
If either the base register is `zero', `tp' or `gp' and XLEN is 32, an
incorrectly sign-extended address is produced when printing. This commit
fixes this by fitting an address into a 32-bit value on RV32.
Besides, H. Peter Anvin discovered that we have wrong address computation
for JALR instruction (the initial bug is back in 2018). This commit also
fixes that based on the idea of Palmer Dabbelt.
gas/
pr29342
* testsuite/gas/riscv/lla32.d: Reflect RV32 address computation fix.
* testsuite/gas/riscv/dis-addr-overflow.s: New testcase.
* testsuite/gas/riscv/dis-addr-overflow-32.d: Likewise.
* testsuite/gas/riscv/dis-addr-overflow-64.d: Likewise.
opcodes/
pr29342
* riscv-dis.c (maybe_print_address): Fit address into 32-bit on RV32.
(print_insn_args): Fix JALR address by adding EXTRACT_ITYPE_IMM.
Three-part patch set from Tsukasa OI to support zmmul in assembler.
The 'Zmmul' is a RISC-V extension consisting of only multiply instructions
(a subset of 'M' which has multiply and divide instructions).
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Add 'Zmmul' implied by 'M'.
(riscv_supported_std_z_ext): Add 'Zmmul' extension.
(riscv_multi_subset_supports): Add handling for new instruction class.
gas/
* testsuite/gas/riscv/attribute-09.d: Updated implicit 'Zmmul' by 'M'.
* testsuite/gas/riscv/option-arch-02.d: Likewise.
* testsuite/gas/riscv/m-ext.s: New test.
* testsuite/gas/riscv/m-ext-32.d: New test (RV32).
* testsuite/gas/riscv/m-ext-64.d: New test (RV64).
* testsuite/gas/riscv/zmmul-32.d: New expected output.
* testsuite/gas/riscv/zmmul-64.d: Likewise.
* testsuite/gas/riscv/m-ext-fail-xlen-32.d: New test (failure
by using RV64-only instructions in RV32).
* testsuite/gas/riscv/m-ext-fail-xlen-32.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-zmmul-32.d: New failure test
(RV32 + Zmmul but with no M).
* testsuite/gas/riscv/m-ext-fail-zmmul-32.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-zmmul-64.d: New failure test
(RV64 + Zmmul but with no M).
* testsuite/gas/riscv/m-ext-fail-zmmul-64.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-noarch-64.d: New failure test
(no Zmmul or M).
* testsuite/gas/riscv/m-ext-fail-noarch-64.l: Likewise.
include/
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZMMUL.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: We don't care zmmul in
these testcases, so just replaced m by a.
* testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-01b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p0.s: Renamed.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p1.s: Renamed.
opcodes/
* riscv-opc.c (riscv_opcodes): Updated multiply instructions to zmmul.
When displaying operands, invalid opcodes may overflow operand buffer
due to additional styling characters. Each style is encoded with 3
bytes. Define MAX_OPERAND_BUFFER_SIZE for operand buffer size and
increase it from 100 bytes to 128 bytes to accommodate 9 sets of styles
in an operand.
gas/
PR binutils/29483
* testsuite/gas/i386/i386.exp: Run pr29483.
* testsuite/gas/i386/pr29483.d: New file.
* testsuite/gas/i386/pr29483.s: Likewise.
opcodes/
PR binutils/29483
* i386-dis.c (MAX_OPERAND_BUFFER_SIZE): New.
(obuf): Replace 100 with MAX_OPERAND_BUFFER_SIZE.
(staging_area): Likewise.
(op_out): Likewise.
Now that we can purge templates, let's use this to improve readability a
little by shortening a few of their names, making functionally similar
ones also have identical names in their multiple incarnations.
Many of the vector conversion insns come with X/Y/Z suffixed forms, for
disambiguation purposes in AT&T syntax. All of these gorups follow
certain patterns. Introduce "xy" and "xyz" templates to reduce
redundancy.
To facilitate using a uniform name for both AVX and AVX512, further
introduce a means to purge a previously defined template: A standalone
<name> will be recognized to have this effect.
Note that in the course of the conversion VFPCLASSPH is properly split
to separate AT&T and Intel syntax forms, matching VFPCLASSP{S,D} and
yielding the intended "ambiguous operand size" diagnostic in Intel mode.
Many of the vector integer insns come in byte/word element pairs. Most
of these pairs follow certain encoding patterns. Introduce a "bw"
template to reduce redundancy.
Note that in the course of the conversion
- the AVX VPEXTRW template which is not being touched needs to remain
ahead of the new "combined" ones, as (a) this should be tried first
when matching insns against templates and (b) its Load attributes
requires it to be first,
- this add a benign/meaningless IgnoreSize attribute to the memory form
of PEXTRB; it didn't seem worth avoiding this.
Many of the vector integer insns come in dword/qword element pairs. Most
of these pairs follow certain encoding patterns. Introduce a "dq"
template to reduce redundancy.
Note that in the course of the conversion
- a few otherwise untouched templates are moved, so they end up next to
their siblings),
- drop an unhelpful Cpu64 from the GPR form of VPBROADCASTQ, matching
what we already have for KMOVQ - the diagnostic is better this way for
insns with multiple forms (i.e. the same Cpu64 attributes on {,V}MOVQ,
{,V}PEXTRQ, and {,V}PINSRQ are useful to keep),
- this adds benign/meaningless IgnoreSize attributes to the GPR forms of
KMOVD and VPBROADCASTD; it didn't seem worth avoiding this.
The vast majority of vector FP insns comes in single/double pairs. Many
pairs follow certain encoding patterns. Introduce an "sd" template to
reduce redundancy. Similarly, to further cover similarities between
AVX512F and AVX512-FP16, introduce an "sdh" template.
For element-size Disp8 shift generalize i386-gen's broadcast size
determination, allowing Disp8MemShift to be specified without an operand
in the affected templated templates. While doing the adjustment also
eliminate an unhelpful (lost information) diagnostic combined with a use
after free in what is now get_element_size().
Note that in the course of the conversion
- the AVX512F form of VMOVUPD has a stray (leftover) Load attribute
dropped,
- VMOVSH has a benign IgnoreSize added (the attribute is still strictly
necessary for VMOVSD, and necessary for VMOVSS as long as we permit
strange combinations like "-march=i286+avx"),
- VFPCLASSPH is properly split to separate AT&T and Intel syntax forms,
matching VFPCLASSP{S,D}.
This reverts commit 384f368958, which
broke i386-gen's emitting of diagnostics. As a replacement to address
the original issue of newer gcc no longer splicing lines when dropping
the line continuation backslashes, switch to using + as the line
continuation character, doing the line splicing in i386-gen.
svstep and svshape instructions subtract 1 before encoding some of the
operands. Obviously zero is not supported for these operands. Whilst
PPC_OPERAND_PLUS1 fits perfectly to mark that maximal value should be
incremented, there is no flag which marks the fact that zero values are
not allowed. This patch adds a new flag, PPC_OPERAND_NONZERO, for this
purpose.
This patch adds support for LibreSOC machine and SVP64 extension flag
for PowerPC architecture. SV (Simple-V) is a strict RISC-paradigm
Scalable Vector Extension for the Power ISA. SVP64 is the 64-bit
Prefixed instruction format implementing SV. Funded by NLnet through EU
Grants No: 825310 and 825322, SV is in DRAFT form and is to be publicly
submitted via the OpenPOWER Foundation ISA Working Group via the
newly-created External RFC Process.
For more details, visit https://libre-soc.org.
It is unclear to me why the corresponding MOV (no Q suffix) can be
issued without REX.W, but MOVQ has to have that prefix (bit). Add
NoRex64 and in exchange drop Size64.
The non-SSE2AVX form of the SIMD variant of the instruction needlessly
has the (still multi-purpose) IgnoreSize attribute. All other similar
SSE2 insns use NoRex64 instead. Make this consistent, noting that the
SSE2AVX form can't have the same change made - there the memory operand
doesn't at the same time permit RegXMM (which logic uses when deciding
whether a Q suffix is okay outside of 64-bit mode).
While the other three variants each differ in attributes and hence can't
be folded, these two pairs actually can be (and were previously
overlooked). This effectively matches their AVX512VL counterparts, which
are also expressed as a single template.
While the x/y/z suffix isn't necessary to use in this case, it is still
odd that these forms don't support broadcast (unlike their AVX512F /
AVX512DQ counterparts). The lack thereof can e.g. make macro-ized
programming more difficult.
One more place where pre-existing templates should have been taken as a
basis: In Intel syntax we want to consistently issue an "ambiguous
operand size" error when a size-less memory operand is specified for an
insn where register use alone isn't sufficient for disambiguation.
BFD_VMA_FMT can't be used in format strings that need to be
translated, because the translation won't work when the type of
bfd_vma differs from the machine used to compile .pot files. We've
known about this for a long time, but patches slip through review.
So just get rid of BFD_VMA_FMT, instead using the appropriate PRId64,
PRIu64, PRIx64 or PRIo64 and SCN variants for scanf. The patch is
mostly mechanical, the only thing requiring any thought is casts
needed to preserve PRId64 output from bfd_vma values, or to preserve
one of the unsigned output formats from bfd_signed_vma values.
First of all rename the meanwhile misleading Opcode_SIMD_FloatD, as it
has also been used for KMOV* and BNDMOV. Then simplify the condition
selecting which form if "reversing" to use - except for the MOV to/from
control/debug/test registers all extended opcode space insns use bit 0
(rather than bit 1) to indicate the direction (from/to memory) of an
operation. With that, D can simply be set on the first of the two
templates, while the other can be dropped.
This syntactic sugar is present in both classical and emerging
architectures, like Alpha, SPARC and RISC-V, and assembler macros
doing the same thing can already be found in the wild e.g. [1], proving
the feature's popularity. It's better to provide support directly in the
assembler so downstream users wouldn't have to re-invent this over and
over again.
[1]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/loongarch/sysdep.h;h=c586df819cd90;hb=HEAD#l28
Also re-order the jump/branch opcodes while at it, so that insns are
sorted in ascending order according to opcodes, and the label form
preceding the real definition.
These two macros print either a 16 digit hex number or an 8 digit
hex number. Unfortunately they depend on both target and host, which
means that the output for 32-bit targets may be either 8 or 16 hex
digits.
Replace them in most cases with code that prints a bfd_vma using
PRIx64. In some cases, deliberately lose the leading zeros.
This change some output, notably in base/offset fields of m68k
disassembly which I think looks better that way, and in error
messages. I've kept leading zeros in symbol dumps (objdump -t)
and in PE header dumps.
bfd/
* bfd-in.h (fprintf_vma, sprintf_vma, printf_vma): Delete.
* bfd-in2.h: Regenerate.
* bfd.c (bfd_sprintf_vma): Don't use sprintf_vma.
(bfd_fprintf_vma): Don't use fprintf_vma.
* coff-rs6000.c (xcoff_reloc_type_tls): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(xcoff_ppc_relocate_section): Likewise.
* cofflink.c (_bfd_coff_write_global_sym): Likewise.
* mmo.c (mmo_write_symbols_and_terminator): Likewise.
* srec.c (srec_write_symbols): Likewise.
* elf32-xtensa.c (print_r_reloc): Similarly for fprintf_vma.
* pei-x86_64.c (pex64_dump_xdata): Likewise.
(pex64_bfd_print_pdata_section): Likewise.
* som.c (som_print_symbol): Likewise.
* ecoff.c (_bfd_ecoff_print_symbol): Use bfd_fprintf_vma.
opcodes/
* dis-buf.c (perror_memory, generic_print_address): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* i386-dis.c (print_operand_value, print_displacement): Likewise.
* m68k-dis.c (print_base, print_indexed): Likewise.
* ns32k-dis.c (print_insn_arg): Likewise.
* ia64-gen.c (_opcode_int64_low, _opcode_int64_high): Delete.
(opcode_fprintf_vma): Delete.
(print_main_table): Use PRIx64 to print opcode.
binutils/
* od-macho.c: Replace all uses of printf_vma with bfd_printf_vma.
* objcopy.c (copy_object): Don't use sprintf_vma. Instead use
PRIx64 to print bfd_vma values.
(copy_main): Likewise.
* readelf.c (CHECK_ENTSIZE_VALUES): Likewise.
(dynamic_section_mips_val): Likewise.
(print_vma): Don't use printf_vma. Instead use PRIx64 to print
bfd_vma values.
(dump_ia64_vms_dynamic_fixups): Likewise.
(process_version_sections): Likewise.
* rddbg.c (stab_context): Likewise.
gas/
* config/tc-i386.c (offset_in_range): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(md_assemble): Likewise.
* config/tc-mips.c (load_register, macro): Likewise.
* messages.c (as_internal_value_out_of_range): Likewise.
* read.c (emit_expr_with_reloc): Likewise.
* config/tc-ia64.c (note_register_values): Don't use fprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(print_dependency): Likewise.
* listing.c (list_symbol_table): Use bfd_sprintf_vma.
* symbols.c (print_symbol_value_1): Use %p to print pointers.
(print_binary): Likewise.
(print_expr_1): Use PRIx64 to print bfd_vma values.
* write.c (print_fixup): Use %p to print pointers. Don't use
fprintf_vma.
* testsuite/gas/all/overflow.l: Update expected output.
* testsuite/gas/m68k/mcf-mov3q.d: Likewise.
* testsuite/gas/m68k/operands.d: Likewise.
* testsuite/gas/s12z/truncated.d: Likewise.
ld/
* deffilep.y (def_file_print): Don't use fprintf_vma. Instead
use PRIx64 to print bfd_vma values.
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* emultempl/pe.em (gld${EMULATION_NAME}_finish): Likewise.
* ldlang.c (lang_map): Use %V to print region origin.
(lang_one_common): Don't use sprintf_vma.
* ldmisc.c (vfinfo): Don't use fprintf_vma or sprintf_vma.
* pe-dll.c (pe_dll_generate_def_file): Likewise.
gdb/
* remote.c (remote_target::trace_set_readonly_regions): Replace
uses of sprintf_vma with bfd_sprintf_vma.
This commit enables disassembler styling for AArch64. After this
commit it is possible to have objdump style AArch64 disassembler
output (using --disassembler-color option). Once the required GDB
patches are merged, GDB will also style the disassembler output.
The changes to support styling are mostly split between two files
opcodes/aarch64-dis.c and opcodes/aarch64-opc.c.
The entry point for the AArch64 disassembler can be found in
aarch64-dis.c, this file handles printing the instruction mnemonics,
and assembler directives (e.g. '.byte', '.word', etc). Some operands,
mostly relating to assembler directives are also printed from this
file. This commit changes all of this to pass through suitable
styling information.
However, for most "normal" instructions, the instruction operands are
printed using a two step process. From aarch64-dis.c, in the
print_operands function, the function aarch64_print_operand is called,
this function is in aarch64-opc.c, and converts an instruction operand
into a string. Then, back in print_operands (aarch64-dis.c), the
operand string is printed.
Unfortunately, the string returned by aarch64_print_operand can be
quite complex, it will include syntax elements, like '[' and ']', in
addition to register names and immediate values. In some cases, a
single operand will expand into what will appear (to the user) as
multiple operands separated with a ','.
This makes the task of styling more complex, all these different
components need to by styled differently, so we need to get the
styling information out of aarch64_print_operand in some way.
The solution that I propose here is similar to the solution that I
used for the i386 disassembler.
Currently, aarch64_print_operand uses snprintf to write the operand
text into a buffer provided by the caller.
What I propose is that we pass an extra argument to the
aarch64_print_operand function, this argument will be a structure, the
structure contains a callback function and some state.
When aarch64_print_operand needs to format part of its output this can
be done by using the callback function within the new structure, this
callback returns a string with special embedded markers that indicate
which mode should be used for each piece of text. Back in
aarch64-dis.c we can spot these special style markers and use this to
split the disassembler output up and apply the correct style to each
piece.
To make aarch64-opc.c clearer a series of new static functions have
been added, e.g. 'style_reg', 'style_imm', etc. Each of these
functions formats a piece of text in a different style, 'register' and
'immediate' in this case.
Here's an example taken from aarch64-opc.c of the new functions in
use:
snprintf (buf, size, "[%s, %s]!",
style_reg (styler, base),
style_imm (styler, "#%d", opnd->addr.offset.imm));
The aarch64_print_operand function is also called from the assembler
to aid in printing diagnostic messages. Right now I have no plans to
add styling to the assembler output, and so, the callback function
used in the assembler ignores the styling information and just returns
an plain string.
I've used the source files in gas/testsuite/gas/aarch64/ for testing,
and have manually gone through and checked that the styling looks
reasonable, however, I'm not an AArch64 expert, so it is possible that
the odd piece is styled incorrectly. Please point out any mistakes
I've made.
With objdump disassembler color turned off, there should be no change
in the output after this commit.
It's entirely unclear why some of the KeyLocker insns had NoRex64 on
them - there's nothing here which could cause emission of REX.W (except
of course a user-specified "rex.w", which we ought to honor anyway).
This commit adds disassembler styling to the libopcodes ppc
disassembler. This conversion was pretty straight forward, I just
converted the fprintf_func calls to fprintf_styled_func calls and
added an appropriate style.
For testing the new styling I just assembled then disassembled the
source files in gas/testsuite/gas/ppc and manually checked that the
styling looked reasonable.
I think the only slightly weird case was how things like '4*cr1+eq'
are styled. As best I can tell, this construct, used for example in
this instruction:
crand 4*cr1+lt,4*cr1+gt,4*cr1+eq
is used to access a field of a control register. I initially tried
styling this whole construct as a register[1], but during review it
was suggested that instead different parts of the text should have
different styles. In this commit I propose styling '4*cr1+lt' like
this:
4 - immediate,
* - text,
cr1 - register
+ - text
lt - sub-mnemonic
If the user does not request styled output from objdump, then there
should be no change in the disassembler output after this commit.
[1] https://sourceware.org/pipermail/binutils/2022-July/121771.html
The MMA instructions use XX3_MASK|3<<21 as an instruction mask, but that
misses the RC bit/bit 31, so if we disassemble a .long that represents an
MMA instruction except that it also has bit 31 set, we will erroneously
disassemble it to that MMA instruction. We create new masks defines that
contain bit 31 so that doesn't happen anymore.
opcodes/
* ppc-opc.c (XACC_MASK, XX3ACC_MASK): New defines.
(P_GER_MASK, xxmfacc, xxmtacc, xxsetaccz, xvi8ger4pp, xvi8ger4,
xvf16ger2pp, xvf16ger2, xvf32gerpp, xvf32ger, xvi4ger8pp, xvi4ger8,
xvi16ger2spp, xvi16ger2s, xvbf16ger2pp, xvbf16ger2, xvf64gerpp,
xvf64ger, xvi16ger2, xvf16ger2np, xvf32gernp, xvi8ger4spp, xvi16ger2pp,
xvbf16ger2np, xvf64gernp, xvf16ger2pn, xvf32gerpn, xvbf16ger2pn,
xvf64gerpn, xvf16ger2nn, xvf32gernn, xvbf16ger2nn, xvf64gernn: Use them.
A standalone (without SAE) StaticRounding attribute is meaningless, and
indeed all other similar insns have ATTSyntax there instead. I can only
assume this was some strange copy-and-paste mistake.
I clearly screwed up in 6ff00b5e12 ("x86/Intel: correct permitted
operand sizes for AVX512 scatter/gather") giving all AVX512F scatter
insns Dword element size. Update testcases (also their gather parts),
utilizing that there previously were two identical lines each (for no
apparent reason).
Update the ARC disassembler to supply style information to the
disassembler output. The output formatting remains unchanged.
opcodes/ChangeLog:
* disassemble.c (disassemble_init_for_target): Set
created_styled_output for ARC based targets.
* arc-dis.c (find_format_from_table): Use fprintf_styled_ftype
instead of fprintf_ftype throughout.
(find_format): Likewise.
(print_flags): Likewise.
(print_insn_arc): Likewise.
Signed-off-by: Claudiu Zissulescu <claziss@gmail.com>
Both forms were missing VexW0 (thus allowing Evex.W=1 to be encoded by
suitable means, which would cause #UD). The memory operand form further
was using the wrong Masking value, thus allowing zeroing-masking to be
encoded for the store form (which would again cause #UD).
This saves quite a number of shift instructions: The "operands" field
can now be retrieved by just masking (no shift), and extracting the
"extension_opcode" field now only requires a (signed) right shift, with
no prereq left one. (Of course there may be architectures where, in a
cross build, there might be no difference at all, e.g. when there are
suitable bitfield extraction insns.)
Until we update the recommended versions of autoconf/automake, files
should be regenerated with automake-1.15.1 and autoconf-2.69. That's
not because we think those versions are golden, and newer versions are
bad. It's simply because maintainers want to be able to update
configury files without trouble, and if someone regenerates files with
automake-1.16.5 then --enable-maintainer-mode builds will hit errors:
checking that generated files are newer than configure... configure.ac:26: error: version mismatch. This is Automake 1.15.1,
configure.ac:26: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:26: comes from Automake 1.16.5. You should recreate
configure.ac:26: aclocal.m4 with aclocal and run automake again.
WARNING: 'automake-1.15' is probably too old.
Correcting this requires regenerating the files by hand.
This commit adds disassembler style to the libopcodes s390
disassembler. This conversion was pretty straight forward, I just
converted the fprintf_func calls to fprintf_styled_func calls and
added an appropriate style.
For testing the new styling I just assembled then disassembled the
source files in gas/testsuite/gas/s390 and manually checked that the
styling looked reasonable.
If the user does not request styled output from objdump, then there
should be no change in the disassembler output after this commit.
