Mode field should be read in octal, all the rest in decimal. Do so.
PR 24061
PR 21786
* coff-rs6000.c (GET_VALUE_IN_FIELD): Add base parameter and
adjust all callers.
(EQ_VALUE_IN_FIELD): Likewise.
* coff64-rs6000.c (GET_VALUE_IN_FIELD): Likewise.
When optimising inline plt calls to __tls_get_addr without tls marker
relocs, ld should zap any toc restore insn after the bctrl, to stop a
load-hit-store stall.
* elf64-ppc.c (ppc64_elf_relocate_section <tls_ldgd_opt>): When
editing an old-style __tls_get_addr call, replace a toc restore
insn with a nop.
Commit 2bf2bf23da exposed a bug on targets that create common sections
other than the standard ELF SHN_COMMON. If these are output by ld -r,
then their type becomes SHT_PROGBITS unless the target handles them
specially (eg. by elf_backend_special_sections), and if they are
merged into .bss/.sbss by ld -r then that section becomes SHT_PROGBITS.
Worse, if they are output by ld -r, then their size is increased by
bfd_generic_define_common_symbol during final link, which leads to
bogus file contents being copied to output.
For mips, it seems to me that the .scommon section should not be
output for ld -r, but I haven't made that change in this patch.
PR 24015
* elf.c (bfd_elf_get_default_section_type): Make common sections
SHT_NOBITS.
* linker.c (bfd_generic_define_common_symbol): Clear
SEC_HAS_CONTENTS.
PR 23966
* libbfd.c (SSIZE_MAX): Define.
(bfd_malloc, bfd_realloc): Don't cast size to long to check for
"negative" values, compare against SSIZE_MAX instead.
* elf32-i386.c (elf_i386_relocate_section): Call
elf_i386_rtype_to_howto to get reloc_howto_type pointer.
* elf64-x86-64.c (elf_x86_64_relocate_section): Call
elf_x86_64_rtype_to_howto to get reloc_howto_type pointer.
All of the backend relocate_section functions that interpret reloc
numbers assuming the input file is of the expected type (ie. same as
output or very similar) really ought to be checking input file type.
Not many do, and those that do currently just assert. This patch
replaces the assertion with a more graceful exit.
PR 23980
* elf32-i386.c (elf_i386_relocate_section): Exit with wrong format
error rather than asserting input file is as expected.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf32-sh.c (sh_elf_relocate_section): Likewise.
* elf32-xtensa.c (elf_xtensa_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Exit with wrong format
error if input file is not ppc32 ELF.
PR 23994
* aoutx.h: Include limits.h.
(get_reloc_upper_bound): Detect long overflow and return a file
too big error if it occurs.
* elf.c: Include limits.h.
(_bfd_elf_get_symtab_upper_bound): Detect long overflow and return
a file too big error if it occurs.
(_bfd_elf_get_dynamic_symtab_upper_bound): Likewise.
(_bfd_elf_get_dynamic_reloc_upper_bound): Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
32-bit constants loaded by two const16 opcodes that involve relocation
(e.g. calculated as a sum of a symbol and a constant) may overflow,
resulting in linking error with the following message:
dangerous relocation: const16: cannot encode: (_start+0x70000000)
They should wrap around instead. Limit const16 opcode immediate field to
16 least significant bits to implement this wrap around.
bfd/
2018-12-11 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (elf_xtensa_do_reloc): Limit const16 opcode
immediate field to 16 least significant bits.
Add elf32_xc16x_rtype_to_howto to get reloc_howto_type pointer from
ELF32_R_TYPE.
* elf32-xc16x.c (elf32_xc16x_rtype_to_howto): New function.
(elf32_xc16x_relocate_section): Call elf32_xc16x_rtype_to_howto
instead of xc16x_reloc_type_lookup to get reloc_howto_type.
Mark the previous definition from IR object as undefined so that the
generic linker will override it.
bfd/
PR ld/23958
* elflink.c (_bfd_elf_add_default_symbol): Override the previous
definition from IR object.
ld/
PR ld/23958
* testsuite/ld-plugin/lto.exp: Run PR ld/23958 test.
* testsuite/ld-plugin/pr23958.c: New file.
* testsuite/ld-plugin/pr23958.t: Likewise.
Up until now OpenRISC GDB only has supported bare metal debugging. This
patch adds linux userspace debugging and core dump analysis support.
The changes are loosely based on nios2 and riscv implementations.
This was tested with linux 4.20 core dumps for executables linked
against musl libc.
bfd/ChangeLog:
* elf32-or1k.c (or1k_grok_prstatus): New function.
(or1k_grok_psinfo): Likewise.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add or1k-linux-tdep.o.
* configure.tgt: Add or1k*-*-linux*.
* or1k-linux-tdep.c: New file.
* or1k-tdep.c (or1k_gdbarch_init): Call gdbarch_init_osabi.
bfd/
PR 23952
* syms.c (_bfd_generic_read_minisymbols): Free syms before
returning with zero symcount.
binutils/
* nm.c (display_rel_file): Use xrealloc to increase minisyms
for synthetic symbols.
