Along with the normal JAL alias, the C-extension one should have been
moved as well by 839189bc93 ("RISC-V: re-arrange opcode table for
consistent alias handling"), for the assembler to actually be able to
use it where/when possible.
Since neither this nor any other compressed branch insn was being tested
so far, take the opportunity and introduce a new testcase covering those.
PR gas/29940
With the single-operand JAL entry now sitting ahead of the two-operand
one, the parsing of a two-operand insn would first try to parse an 'a'-
style operand, resulting in the insertion of bogus (and otherwise
unused) undefined symbols in the symbol table, having register names.
Since 'a' is used as 1st operand only with J and JAL, and since JAL is
the only insn _also_ allowing for a register as 1st operand (and then
there being a 2nd one), special case this parsing aspect right there.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
This commit makes CSR class handling for 'Smstateen' and 'Ssstateen'
extensions simpler using fall-throughs (as used in CSR_CLASS_I{,_32}).
gas/ChangeLog:
* config/tc-riscv.c (riscv_csr_address): Simplify the logic for
'Smstateen' and 'Ssstateen' extensions.
The current AS accepts invalid operands due to miss of operands length check.
For example, "e6" is an invalid operand in (vsetvli a0, a1, e6, mf8, tu, ma),
but it's still accepted by assembler. In detail, the condition check "strncmp
(array[i], *s, len) == 0" in arg_lookup function passes with "strncmp ("e64",
"e6", 2)" in the case above. So the generated encoding is same as that of
(vsetvli a0, a1, e64, mf8, tu, ma).
This patch fixes issue above by prompting an error in such case and also adds
a new testcase.
gas/ChangeLog:
* config/tc-riscv.c (arg_lookup): Add string length check for operands.
* testsuite/gas/riscv/vector-insns-fail-vsew.d: New testcase for an illegal vsew.
* testsuite/gas/riscv/vector-insns-fail-vsew.l: Likewise.
* testsuite/gas/riscv/vector-insns-fail-vsew.s: Likewise.
Commit bb996692bd ("RISC-V/gas: allow generating up to 176-bit
instructions with .insn") tried to start supporting long instructions but
it was insufficient.
1. It heavily depended on the bignum internals (radix of 2^16),
2. It generates "value conflicts with instruction length" even if a big
number instruction encoding does not exceed its expected length and
3. Because long opcode was handled separately (from struct riscv_cl_insn),
some information like DWARF line number correspondence was missing.
To resolve these problems, this commit:
1. Handles bignum (and its encodings) precisely and
2. Incorporates long opcode handling into regular instruction handling.
This commit will be tested on the separate commit.
gas/ChangeLog:
* config/tc-riscv.c (struct riscv_cl_insn): Add long opcode field.
(create_insn) Clear long opcode marker.
(install_insn) Install longer opcode as well.
(s_riscv_insn) Likewise.
(riscv_ip_hardcode): Make big number handling stricter. Length and
the value conflicts only if the bignum size exceeds the expected
maximum length.
This commit adds 'Ssstateen' extension, which is a supervisor-visible view
of the 'Smstateen' extension. It means, this extension implements sstateen*
and hstateen* CSRs of the 'Smstateen' extension.
Note that 'Smstateen' extension itself is unchanged but due to
implementation simplicity, it is implemented so that 'Smstateen' implies
'Ssstateen' (just like 'M' implies 'Zmmul').
This is based on the latest version of RISC-V Profiles
(version 0.9-draft, Frozen):
<226b7f6430>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Update implication rules.
(riscv_supported_std_s_ext) Add 'Ssstateen' extension.
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Rename
CSR_CLASS_SMSTATEEN_AND_H{,_32} to CSR_CLASS_SSSTATEEN_...
Add CSR_CLASS_SSSTATEEN.
(riscv_csr_address): Support new/renamed CSR classes.
* testsuite/gas/riscv/csr.s: Add 'Ssstateen' extension to comment.
* testsuite/gas/riscv/csr-version-1p9p1.l: Reflect changes to
error messages.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/ssstateen-csr.s: Test for 'Ssstateen' CSRs.
* testsuite/gas/riscv/ssstateen-csr.d: Likewise.
* testsuite/gas/riscv/smstateen-csr-s.d: Test to make sure that
supervisor/hypervisor part of 'Smstateen' CSRs are accessible from
'RV32IH_Smstateen', not just from 'RV32IH_Ssstateen' that is tested
in ssstateen-csr.d.
include/ChangeLog:
* opcode/riscv-opc.h: Update DECLARE_CSR declarations with
new CSR classes.
Consider the case,
.option arch, rv32i
.option norelax
.option arch, +c
.byte 1
.align 2
addi a0, zero, 1
Assembler adds $d for the odd .byte, and then adds $x+arch for the
alignment. Since norelax, riscv_add_odd_padding_symbol will add the
$d and $x for the odd alignment, but accidently remove the $x+arch because
it has the same address as $d. Therefore, we will get the unexpected result
before applying this patch,
.byte 1 # $d
.align 2 # odd alignment, $xrv32ic replaced by $d + $x
After this patch, the expected result should be,
.byte 1 # $d
.align 2 # odd alignment, $xrv32ic replaced by $d + $xrv32ic
gas/
* config/tc-riscv.c (make_mapping_symbol): If we are adding mapping symbol
for odd alignment, then we probably will remove the $x+arch by accidently
when it has the same address of $d. Try to add the removed $x+arch back
after the $d rather than just $x.
(riscv_mapping_state): Updated since parameters of make_mapping_symbol are
changed.
(riscv_add_odd_padding_symbol): Likewise.
(riscv_remove_mapping_symbol): Removed and moved the code into the
riscv_check_mapping_symbols.
(riscv_check_mapping_symbols): Updated.
* testsuite/gas/riscv/mapping-dis.d: Updated and added new testcase.
* testsuite/gas/riscv/mapping-symbols.d: Likewise.
* testsuite/gas/riscv/mapping.s: Likewise.
Before figuring out the suppress rule of mapping symbol with architecture
(changed back to $x), always generate them at the start of the sections.
gas/
* config/tc-riscv.c (need_arch_map_symbol): Removed.
(riscv_mapping_state): Updated.
(riscv_check_mapping_symbols): Updated.
* testsuite/gas/riscv/mapping-non-arch.d: Removed.
* testsuite/gas/riscv/mapping-non-arch.s: Likewise.
We don't support instructions longer than 64-bits yet. Still, we can
modify validate_riscv_insn function to prevent unexpected behavior by
limiting the "length" of an instruction to 64-bit (or less).
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Fix function
description comment based on current spec. Limit instruction
length up to 64-bit for now. Make sure that required_bits does
not corrupt even if unsigned long long is longer than 64-bit.
Some versions of gcc warn by default about shadowed outer-scope
declarations. This affects frag_align_code, which is declared in
frags.h. Rename the offending function parameter. While there also
switch to using true/false at the function call sites.
Commit 40f1a1a456 ("RISC-V: Output mapping symbols with ISA string.")
caused a build failure on GCC 12 as follows:
make[3]: Entering directory '$(builddir)/gas'
CC config/tc-riscv.o
In file included from $(srcdir)/gas/config/tc-riscv.c:23:
$(srcdir)/gas/as.h: In function ‘make_mapping_symbol’:
$(srcdir)/gas/as.h:123:15: error: ‘buff’ may be used uninitialized [-Werror=maybe-uninitialized]
123 | #define xfree free
| ^~~~
$(srcdir)/gas/config/tc-riscv.c:487:9: note: ‘buff’ was declared here
487 | char *buff;
| ^~~~
cc1: all warnings being treated as errors
make[3]: *** [Makefile:1425: config/tc-riscv.o] Error 1
This is caused by a false positive of "maybe uninitialized" variable
detection (-Wmaybe-uninitialized). To avoid this error, this commit
initializes the local variable buff to NULL first in all cases.
gas/ChangeLog:
* config/tc-riscv.c (make_mapping_symbol): Initialize variable
buff with NULL to avoid build failure caused by a GCC's false
positive of maybe uninitialized variable detection.
RISC-V Psabi pr196,
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/196
bfd/
* elfxx-riscv.c (riscv_release_subset_list): Free arch_str if needed.
(riscv_copy_subset_list): Copy arch_str as well.
* elfxx-riscv.h (riscv_subset_list_t): Store arch_str for each subset list.
gas/
* config/tc-riscv.c (riscv_reset_subsets_list_arch_str): Update the
architecture string in the subset_list.
(riscv_set_arch): Call riscv_reset_subsets_list_arch_str after parsing new
architecture string.
(s_riscv_option): Likewise.
(need_arch_map_symbol): New boolean, used to indicate if .option
directives do affect instructions.
(make_mapping_symbol): New boolean parameter reset_seg_arch_str. Need to
generate $x+arch for MAP_INSN, and then store it into tc_segment_info_data
if reset_seg_arch_str is true.
(riscv_mapping_state): Decide if we need to add $x+arch for MAP_INSN. For
now, only add $x+arch if the architecture strings in subset list and segment
are different. Besides, always add $x+arch at the start of section, and do
not add $x+arch for code alignment, since rvc for alignment can be judged
from addend of R_RISCV_ALIGN.
(riscv_remove_mapping_symbol): If current and previous mapping symbol have
same value, then remove the current $x only if the previous is $x+arch;
Otherwise, always remove previous.
(riscv_add_odd_padding_symbol): Updated.
(riscv_check_mapping_symbols): Don't need to add any $x+arch if
need_arch_map_symbol is false, so changed them to $x.
(riscv_frag_align_code): Updated since riscv_mapping_state is changed.
(riscv_init_frag): Likewise.
(s_riscv_insn): Likewise.
(riscv_elf_final_processing): Call riscv_release_subset_list to release
subset_list of riscv_rps_as, rather than only release arch_str in the
riscv_write_out_attrs.
(riscv_write_out_attrs): No need to call riscv_arch_str, just get arch_str
from subset_list of riscv_rps_as.
* config/tc-riscv.h (riscv_segment_info_type): Record current $x+arch mapping
symbol of each segment.
* testsuite/gas/riscv/mapping-0*: Merged and replaced by mapping.s.
* testsuite/gas/riscv/mapping.s: New testcase, to test most of the cases in
one file.
* testsuite/gas/riscv/mapping-symbols.d: Likewise.
* testsuite/gas/riscv/mapping-dis.d: Likewise.
* testsuite/gas/riscv/mapping-non-arch.s: New testcase for the case that
does need any $x+arch.
* testsuite/gas/riscv/mapping-non-arch.d: Likewise.
* testsuite/gas/riscv/option-arch-01a.d: Updated.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Set riscv_fpr_names back to
riscv_fpr_names_abi or riscv_fpr_names_numeric when zfinx is disabled
for some specfic code region.
(riscv_get_map_state): Recognized mapping symbols $x+arch, and then reset
the architecture string once the ISA is different.
There's no need for such workarounds anymore now that we use C99
uniformly. This addresses several testsuite failures encountered when
(cross-)building on a 32-bit host.
Pre- and post-increment/decrement are side effects, the behavior of
which is undefined when combined with passing an address of the accessed
variable in the same function invocation. There's no need for the
increments here - simply adding 1 achieves the intended effect without
triggering compiler diagnostics (which are fatal with -Werror).
This patch introduces support for arbitrary literal instruction
arguments, that are not encoded in the opcode.
A typical use case for this feature would be an instruction that
applies an implicit shift by a constant value on an immediate
(that is a real operand). With this patch it is possible to make
this shift visible in the dissasembly and support such artificial
parameter as part of the asssembly code.
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch introduces support for arbitrary signed or unsigned immediate
encoding formats. The formats have the form "XsN@S" and "XuN@S" with N
being the number of bits and S the LSB position.
For example an immediate field of 5 bytes that encodes a signed value
and is stored in the bits 24-20 of the instruction word can use the
format specifier "Xs5@20".
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Although they are not (and should not be) reachable, following macro-only
operands are parsed in the `validate_riscv_insn' function and ignored.
That function also notes that they are macro-only.
- "A"
- "B"
- "I"
Following this convention, this commit adds three remaining macro-only
operands to this function. By doing this, we could instead choose to reject
those operands from appearing in regular instructions later.
- "c" (used by call, tail and jump macros)
- "VM" (used by vmsge.vx and vmsgeu.vx macros)
- "VT" (likewise)
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Add "c", "VM" and "VT"
macro-only operand types.
To avoid -Werror=strict-prototypes, this commit changes () to (void).
This is because "()" possibly means a function prototype with indeterminate
arguments on old C standards.
gas/ChangeLog:
* config/tc-riscv.c (riscv_set_tso): Fix declaration.
This is a minor fix to commit 96462b0129
("RISC-V: Implement Ztso extension"). Currently, it sets EF_RISCV_TSO ELF
flag when initial ISA string contains the 'Ztso' extension. However, GAS
has a way to update the ISA string: ".option arch".
When the architecture is updated by ".option arch", EF_RISCV_RVC ELF flag
is set when the 'C' extension is detected. Analogously, this commit sets
the EF_RISCV_TSO when the 'Ztso' extension is detected.
gas/ChangeLog:
* config/tc-riscv.c (s_riscv_option): Set TSO ELF flag if the
'Ztso' extension is specified via ".option arch" directive.
This patch support ZTSO extension. It will turn on the tso flag for elf_flags
once we have enabled Ztso extension. This is intended to implement v0.1 of
the proposed specification which can be found in Chapter 25 of,
https://github.com/riscv/riscv-isa-manual/releases/download/draft-20220723-10eea63/riscv-spec.pdf.
bfd\ChangeLog:
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Set TSO flag.
* elfxx-riscv.c: Add Ztso's arch.
binutils\ChangeLog:
* readelf.c (get_machine_flags): Set TSO flag.
gas\ChangeLog:
* config/tc-riscv.c (riscv_set_tso): Ditto.
(riscv_set_arch): Ditto.
* testsuite/gas/riscv/ztso.d: New test.
include\ChangeLog:
* elf/riscv.h (EF_RISCV_TSO): Ditto.
Since we have the same behaviors of CALL and CALL_PLT relocs in linker for now,
3b1450b38c
And the psabi already deprecate the CALL reloc,
a0dced8501
Therefore, we should always generate R_RISCV_CALL_PLT reloc for call, even if
it has @plt postfix. I believe LLVM (https://reviews.llvm.org/D132530) already
support this, so GNU as should do the same thing.
gas/
* config/tc-riscv.c (riscv_ip): Always generate CALL_PLT reloc for
call, even if it has @plt postfix.
* testsuite/gas/riscv/no-relax-reloc.d: Updated CALL to CALL_PLT.
* testsuite/gas/riscv/relax-reloc.d: Likewise.
ld/
* testsuite/ld-riscv-elf/variant_cc-r.d: Updated CALL to CALL_PLT.
Clang generates a warning on unused (technically, written but not read
thereafter) variables. By the default configuration (with "-Werror"), it
causes a build failure (unless "--disable-werror" is specified).
This commit adds ATTRIBUTE_UNUSED attribute to some of them, which means
they are *possibly* unused (can be used but no warnings occur when
unused) and removes others.
bfd/ChangeLog:
* elf32-lm32.c (lm32_elf_size_dynamic_sections): Mark unused
rgot_count variable.
* elf32-nds32.c (elf32_nds32_unify_relax_group): Remove unused
count variable.
* mmo.c (mmo_scan): Mark unused lineno variable.
binutils/ChangeLog:
* windmc.c (write_rc): Remove unused i variable.
gas/ChangeLog:
* config/tc-riscv.c (riscv_ip): Remove unused argnum variable.
ld/ChangeLog:
* pe-dll.c (generate_reloc): Remove unused bi and page_count
variables.
Vector CSRs are also required on smaller vector subsets.
Not only that the most of vector CSRs are general purpose (and must be
accessible for every vector subsets), current minimum vector subset 'Zve32x'
requires fixed point arithmetic, making remaining non-general purpose
(fixed point arithmetic only) CSRs mandatory for such subsets.
So, those CSRs must be accessible from 'Zve32x', not just from 'V'.
This commit fixes this issue which caused CSR accessibility warnings.
gas/ChangeLog:
* config/tc-riscv.c (riscv_csr_address): Change vector CSR
requirement from 'V' to 'Zve32x'.
* testsuite/gas/riscv/csr-version-1p9p1.l: Change vector CSR
requirement from 'V' to 'Zve32x'.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
BFD_VMA_FMT can't be used in format strings that need to be
translated, because the translation won't work when the type of
bfd_vma differs from the machine used to compile .pot files. We've
known about this for a long time, but patches slip through review.
So just get rid of BFD_VMA_FMT, instead using the appropriate PRId64,
PRIu64, PRIx64 or PRIo64 and SCN variants for scanf. The patch is
mostly mechanical, the only thing requiring any thought is casts
needed to preserve PRId64 output from bfd_vma values, or to preserve
one of the unsigned output formats from bfd_signed_vma values.
This commit adds `OP_V' (OP-V: vector instruction opcode for now
ratified `V' extension) to .insn opcode name list. Although vector
instruction encoding is not implemented in `.insn' directive, it will
help future implementation of custom vector `.insn'.
gas/ChangeLog:
* config/tc-riscv.c (opcode_name_list): Add `OP_V'.
* testsuite/gas/riscv/insn.s: Add testcase.
* testsuite/gas/riscv/insn.d: Likewise.
* testsuite/gas/riscv/insn-dwarf.d: Reflect insn.s update.
This allocates entries added to the string hash tables on the notes
obstack, so that at least those do not leak. A followup patch will
switch over the str_hash allocation to notes_calloc, which is why I
haven't implemented deleting all the target string hash tables.
* config/obj-coff-seh.c (get_pxdata_name, alloc_pxdata_item): Use
notes obstack for string hash table entries.
* config/tc-alpha.c (get_alpha_reloc_tag, md_begin): Likewise.
* config/tc-h8300.c (md_begin): Likewise.
* config/tc-ia64.c (dot_rot, dot_pred_rel, dot_alias): Likewise.
* config/tc-nds32.c (nds32_relax_hint): Likewise.
* config/tc-riscv.c (riscv_init_csr_hash): Likewise.
* config/tc-score.c (s3_insert_reg): Likewise.
(s3_build_score_ops_hsh, s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
* config/tc-tic4x.c (tic4x_asg): Likewise.
Currently md_end is typically used for some final actions rather than
freeing memory like other *_end functions. Rename it to md_finish,
and rename target implementation. The renaming of target functions
makes it possible to find them all with "grep md_finish",
eg. md_mips_end is renamed to mips_md_finish, not md_mips_finish.
This patch leaves a number of md_end functions unchanged, those that
either do nothing or deallocate memory, and calls them late.
The idea here is that target maintainers implement md_end functions to
tidy memory, if anyone cares. Freeing persistent memory in gas is
not at all important, except that it can hide more important memory
leaks, those that happen once per some frequent gas operation, amongst
these unimportant memory leaks.
* as.c (main): Rename md_end to md_finish.
* config/tc-alpha.c, * config/tc-alpha.h,
* config/tc-arc.c, * config/tc-arc.h,
* config/tc-arm.c, * config/tc-arm.h,
* config/tc-csky.c, * config/tc-csky.h,
* config/tc-ia64.c, * config/tc-ia64.h,
* config/tc-mcore.c, * config/tc-mcore.h,
* config/tc-mips.c, * config/tc-mips.h,
* config/tc-mmix.c, * config/tc-mmix.h,
* config/tc-msp430.c, * config/tc-msp430.h,
* config/tc-nds32.c, * config/tc-nds32.h,
* config/tc-ppc.c, * config/tc-ppc.h,
* config/tc-pru.c, * config/tc-pru.h,
* config/tc-riscv.c, * config/tc-riscv.h,
* config/tc-s390.c, * config/tc-s390.h,
* config/tc-sparc.c, * config/tc-sparc.h,
* config/tc-tic4x.c, * config/tc-tic4x.h,
* config/tc-tic6x.c, * config/tc-tic6x.h,
* config/tc-v850.c, * config/tc-v850.h,
* config/tc-xtensa.c, * config/tc-xtensa.h,
* config/tc-z80.c, * config/tc-z80.h: Similarly.
* output-file.c (output_file_close): Call md_end.
To support feature gate like Smstateen && H, this commit adds certain
CSR feature gate handling. It also changes how RV32-only CSRs are
handled for cleanliness.
gas/ChangeLog:
* config/tc-riscv.c (riscv_csr_address): Add CSR feature gate
handling for H. Change handling on RV32.
According to the picture 28.1 in the current ISA spec, h is no larger the
multi-letter extension, it is a single extension after v. Therefore, this
patch fix the implementation, and use the single h to control hypervisor
CSRs and instructions, which we promised to do before.
bfd/
* elfxx-riscv.c (riscv_supported_std_ext): Added h with version 1.0 after v.
(riscv_supported_std_h_ext): Removed.
(riscv_all_supported_ext): Updated since riscv_supported_std_h_ext is removed.
(riscv_prefix_ext_class): Removed RV_ISA_CLASS_H.
(parse_config): Updated since riscv_prefix_ext_class is removed.
(riscv_recognized_prefixed_ext): Likewise.
(riscv_get_default_ext_version): Likewise.
(riscv_multi_subset_supports): Handle INSN_CLASS_H for hypervisor instructions.
(riscv_multi_subset_supports_ext): Likewise.
gas/
* config/tc-riscv.c (riscv_csr_class): Added CSR_CLASS_H and CSR_CLASS_H_32 for
hypervisor CSRs.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Updated since hypervisor CSRs are
controlled by single h extension for now.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/h-ext-32.d: Added h to architecture string.
* testsuite/gas/riscv/h-ext-64.d: Likewise.
* testsuite/gas/riscv/march-fail-single-prefix-h: Removed since h is no
longer multi-letter extension.
* testsuite/gas/riscv/march-fail-unknown-h.d: Likewise.
include/
* opcode/riscv-opc.h: Control hypervisor CSRs by h extension, rather than
the privileged spec verisons.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_H.
opcodes/
* riscv-opc.c (riscv_opcodes): Control hypervisor instructions by h extension.
This commit fixes inconsistent error message format involving compressed
funct<n> fields. In specific, funct6 had an error message with range
0..2^<n> ("0..64") unlike other funct<n> fields with 0..2^<n>-1
(e.g. funct4 with "0..15").
gas/ChangeLog:
* config/tc-riscv.c (riscv_ip): Fix inconsistent error message.
Presently in this case, due to an undefined behavior shift, at least
with x86 cross builds I'm observing:
Error: value conflicts with instruction length `8,0x0000003f'
Eliminate the UB and extend the respective testcase.
Currently we report errors as "unrecognized opcode `fence.i'" when the
opcode isn't part of the selected extensions.
This patch expands that error message to include the missing extension
information. For example, now the error message would be "unrecognized
opcode `fence.i', extension `zifencei' required".
If the opcode is not a part of any extension, the error message reverts
to "unrecognized opcode `<op statement>'".
Signed-off-by: Patrick O'Neill <patrick@rivosinc.com>
bfd/
pr 28733
* elfxx-riscv.c (riscv_multi_subset_supports_ext): New function,
used to return the extension string for each INSN_CLASS_*.
* elfxx-riscv.h: Added extern riscv_multi_subset_supports_ext.
gas/
pr 28733
* config/tc-riscv.c (struct riscv_ip_error): New structure,
contains information about errors that occur within the riscv_ip.
(riscv_ip): Use struct riscv_ip_error to report more detailed errors.
* testsuite/gas/riscv/c-fld-fsd-fail.l: Updated.
* testsuite/gas/riscv/march-imply-i2p1-01.: Likewise.
Currently we report errors as "invalid CSR 'fscr' for the current ISA"
when the instruction isn't valid.
This patch expands that error message to include the missing extension
information. For example, now the error message would be "invalid CSR
'fscr' for the current ISA, CSR 'fscr' needs 'f' extension".
Signed-off-by: Patrick O'Neill <patrick@rivosinc.com>
gas/
pr 28733
* config/tc-riscv.c (riscv_csr_address): Report more details
when the CSR is invalid.
* testsuite/gas/riscv/csr-version-1p10.l: Updated detailed errors.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
