Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
The description of instructions 'th.fmv.hw.x' and 'th.fmv.x.hw' of the
XTheadFmv extension in T-Head specific is incorrect, and it also has
some impact on the implementation of the binutils, so this patch
corrects this.
For details see:
https://github.com/T-head-Semi/thead-extension-spec/pull/34
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-fmv.d: Correct test.
* testsuite/gas/riscv/x-thead-fmv.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_FMV_HW_X): Correct coding.
(MASK_TH_FMV_HW_X): Likewise.
(MATCH_TH_FMV_X_HW): Likewise.
(MASK_TH_FMV_X_HW): Likewise.
opcodes/ChangeLog:
* riscv-opc.c: Correct operands.
SiFive has define as set of flexible instruction for extending vector
coprocessor, it able to encoding opcode like .insn but with predefined
format.
List of instructions:
sf.vc.x
sf.vc.i
sf.vc.vv
sf.vc.xv
sf.vc.iv
sf.vc.fv
sf.vc.vvv
sf.vc.xvv
sf.vc.ivv
sf.vc.fvv
sf.vc.vvw
sf.vc.xvw
sf.vc.ivw
sf.vc.fvw
sf.vc.v.x
sf.vc.v.i
sf.vc.v.vv
sf.vc.v.xv
sf.vc.v.iv
sf.vc.v.fv
sf.vc.v.vvv
sf.vc.v.xvv
sf.vc.v.ivv
sf.vc.v.fvv
sf.vc.v.vvw
sf.vc.v.xvw
sf.vc.v.ivw
sf.vc.v.fvw
Spec of Xsfvcp
https://www.sifive.com/document-file/sifive-vector-coprocessor-interface-vcix-software
Co-authored-by: Hau Hsu <hau.hsu@sifive.com>
Co-authored-by: Kito Cheng <kito.cheng@sifive.com>
Back then when the support for the RISC-V vector crypto extensions
was merged, the specification was frozen, but not ratified.
A frozen specification is allowed to change within tight bounds
before ratification and this has happend with the vector crypto
extensions.
The following changes were applied:
* A new extension Zvkb was defined, which is a strict subset of Zvbb.
* Zvkn and Zvks include now Zvkb instead of Zvbb.
This patch implements these changes between the frozen and the
ratified specification.
Note, that this technically an incompatible change of Zvkn and Zvks,
but I am not aware of any project that depends on the currently
implemented behaviour of Zvkn and Zvks. So this patch should be fine.
Reported-By: Jerry Shih <jerry.shih@sifive.com>
Reported-By: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds permutation instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
permutation instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VMVXS): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds mask instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
mask instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VMPOPCM): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds floating-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
floating-point arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VFSQRTV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds fixed-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
fixed-point arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VAADDVV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds integer arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
integer arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VADCVVM): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds the sub-extension "XTheadZvamo" for the
"XTheadVector" extension, and it provides AMO instructions
for T-Head VECTOR vendor extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add support
for "XTheadZvamo" extension.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-zvamo.d: New test.
* testsuite/gas/riscv/x-thead-vector-zvamo.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VAMOADDWV): New.
* opcode/riscv.h (enum riscv_insn_class): Add insn class.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore it
makes sense to group them into smaller chunks in form of vendor
extensions.
This patch adds provides load/store segment instructions for T-Head VECTOR
vendor extension, which same as the "Zvlsseg" extension in RVI 0.71 vector
extension, but belongs to the "XTheadVector" extension. The 'th' prefix
and the "XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add test.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VLSEG2BV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds load/store instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
load/store instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VLBV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the CSRs for XTheadVector. Because of the
conflict between encoding and teh 'V' extension, it is implemented
by alias. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Add the class for
the CSRs of the "XTheadVector" extension.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/x-thead-vector-csr-warn.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr-warn.l: New test.
* testsuite/gas/riscv/x-thead-vector-csr.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (DECLARE_CSR_ALIAS): Likewise.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Prefix the CSRs disassembly with 'th'.
Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html
Contributors:
Mary Bennett <mary.bennett@embecosm.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added `xcvalu`
instruction class.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Added the necessary
operands for the extension.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Noted XCValu as an additional ISA extension
for CORE-V.
* testsuite/gas/riscv/cv-alu-boundaries.d: New test.
* testsuite/gas/riscv/cv-alu-boundaries.l: New test.
* testsuite/gas/riscv/cv-alu-boundaries.s: New test.
* testsuite/gas/riscv/cv-alu-fail-march.d: New test.
* testsuite/gas/riscv/cv-alu-fail-march.l: New test.
* testsuite/gas/riscv/cv-alu-fail-march.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.s: New test.
* testsuite/gas/riscv/cv-alu-insns.d: New test.
* testsuite/gas/riscv/cv-alu-insns.s: New test.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Disassemble xcb operand.
* riscv-opc.c: Defined the MASK and added XCValu instructions.
include/ChangeLog:
* opcode/riscv-opc.h: Added corresponding MATCH and MASK macros
for XCValu.
* opcode/riscv.h: Added corresponding EXTRACT and ENCODE macros
for XCValu.
(enum riscv_insn_class): Added the XCValu instruction class.
Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html
Contributors:
Mary Bennett <mary.bennett@embecosm.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added `xcvmac`
instruction class.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Added the necessary
operands for the extension.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Noted XCVmac as an additional ISA extension
for CORE-V.
* testsuite/gas/riscv/cv-mac-fail-march.d: New test.
* testsuite/gas/riscv/cv-mac-fail-march.l: New test.
* testsuite/gas/riscv/cv-mac-fail-march.s: New test.
* testsuite/gas/riscv/cv-mac-fail-operand.d: New test.
* testsuite/gas/riscv/cv-mac-fail-operand.l: New test.
* testsuite/gas/riscv/cv-mac-fail-operand.s: New test.
* testsuite/gas/riscv/cv-mac-insns.d: New test.
* testsuite/gas/riscv/cv-mac-insns.s: New test.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Disassemble information with
the EXTRACT macro implemented.
* riscv-opc.c: Defined the MASK and added
XCVmac instructions.
include/ChangeLog:
* opcode/riscv-opc.h: Added corresponding MATCH and MASK macros
for XCVmac.
* opcode/riscv.h: Added corresponding EXTRACT and ENCODE macros
for uimm.
(enum riscv_insn_class): Added the XCVmac instruction class.
This is for consistency and to prevent possible unnecessary errors due
to this inconsistency.
include/ChangeLog:
* opcode/riscv-opc.h (DECLARE_INSN): Remove semicolons from the
end of each entry.
This commit adds now stable and approved 'Smcntrpmf' extension defined by
the RISC-V Cycle and Instret Privilege Mode Filtering specification.
Note that, because mcyclecfg and minstretcfg CSRs conflict with the
privileged specification version 1.9.1, CSRs for this extension are only
enabled on the privileged specification version 1.10 or later.
By checking the base privileged specification, we no longer need to change
the design of base CSR handling.
This is based on the specification version v1.0_rc1 (Frozen):
<32b752c40d>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Add implication rule from
the new 'Smcntrpmf' extension. (riscv_supported_std_s_ext): Add
'Smcntrpmf' to the supported S extension list.
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Add new CSR classes
CSR_CLASS_SMCNTRPMF and CSR_CLASS_SMCNTRPMF_32.
(riscv_csr_address): Add handling for new CSR classes.
* testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs. Move
"mscounteren" and "mhcounteren" CSRs and note that they are now
aliases.
* testsuite/gas/riscv/csr-dw-regnums.d: Reflect the change.
* testsuite/gas/riscv/csr.s: Add new CSRs. Move "mscounteren"
and "mhcounteren" CSRs and note that they are now reused for
the 'Smcntrpmf' extension.
* testsuite/gas/riscv/csr-version-1p9p1.d: Reflect the changes of
csr.s.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Likewise.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h: Add new CSRs noting that this extension is
incompatible with the privileged specification version 1.9.1.
Move "mscounteren" and "mhcounteren" CSRs, make them aliases and
reuse the CSR numbers from the 'Smcntrpmf' extension.
(CSR_MSCOUNTEREN, CSR_MHCOUNTEREN) Remove as "mscounteren" and
"mhcounteren" are now aliases and new CSR macros are used instead.
(CSR_MCYCLECFG, CSR_MINSTRETCFG, CSR_MCYCLECFGH, CSR_MINSTRETCFGH):
New CSR macros.
This commit adds 'Zihintntl' extension and its hint instructions.
This is based on:
<0dc91f505e>,
the first ISA Manual noting that the 'Zihintntl' extension is ratified.
Note that compressed 'Zihintntl' hints require either 'C' or
'Zca' extension.
Co-authored-by: Nelson Chu <nelson@rivosinc.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_supported_std_z_ext): Add 'Zihintntl'
standard hint 'Z' extension.
(riscv_multi_subset_supports): Support new instruction classes.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zihintntl.s: New test for 'Zihintntl'
including auto-compression without C prefix and explicit C prefix.
* testsuite/gas/riscv/zihintntl.d: Likewise.
* testsuite/gas/riscv/zihintntl-na.d: Likewise.
* testsuite/gas/riscv/zihintntl-base.s: New test for correspondence
between 'Zihintntl' and base 'I' or 'C' instructions.
* testsuite/gas/riscv/zihintntl-base.d: Likewise.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): Add new instruction
classes: INSN_CLASS_ZIHINTNTL and INSN_CLASS_ZIHINTNTL_AND_C.
(MASK_NTL_P1, MATCH_NTL_P1, MASK_NTL_PALL,
MATCH_NTL_PALL, MASK_NTL_S1, MATCH_NTL_S1, MASK_NTL_ALL,
MATCH_NTL_ALL, MASK_C_NTL_P1, MATCH_C_NTL_P1, MASK_C_NTL_PALL,
MATCH_C_NTL_PALL, MASK_C_NTL_S1, MATCH_C_NTL_S1, MASK_C_NTL_ALL,
MATCH_C_NTL_ALL): New.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Add instructions from the
'Zihintntl' extension.
This patch support Zcb extension, contains new compressed instructions,
some instructions depend on other existed extension, like 'zba', 'zbb'
and 'zmmul'. Zcb also imply Zca extension to enable the compressing
features.
Co-Authored by: Charlie Keaney <charlie.keaney@embecosm.com>
Co-Authored by: Mary Bennett <mary.bennett@embecosm.com>
Co-Authored by: Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Co-Authored by: Sinan Lin <sinan.lin@linux.alibaba.com>
Co-Authored by: Simon Cook <simon.cook@embecosm.com>
Co-Authored by: Shihua Liao <shihua@iscas.ac.cn>
Co-Authored by: Yulong Shi <yulong@iscas.ac.cn>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): New extension.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): New operators.
(riscv_ip): Ditto.
* testsuite/gas/riscv/zcb.d: New test.
* testsuite/gas/riscv/zcb.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_C_LBU): New opcode.
(MASK_C_LBU): New mask.
(MATCH_C_LHU): New opcode.
(MASK_C_LHU): New mask.
(MATCH_C_LH): New opcode.
(MASK_C_LH): New mask.
(MATCH_C_SB): New opcode.
(MASK_C_SB): New mask.
(MATCH_C_SH): New opcode.
(MASK_C_SH): New mask.
(MATCH_C_ZEXT_B): New opcode.
(MASK_C_ZEXT_B): New mask.
(MATCH_C_SEXT_B): New opcode.
(MASK_C_SEXT_B): New mask.
(MATCH_C_ZEXT_H): New opcode.
(MASK_C_ZEXT_H): New mask.
(MATCH_C_SEXT_H): New opcode.
(MASK_C_SEXT_H): New mask.
(MATCH_C_ZEXT_W): New opcode.
(MASK_C_ZEXT_W): New mask.
(MATCH_C_NOT): New opcode.
(MASK_C_NOT): New mask.
(MATCH_C_MUL): New opcode.
(MASK_C_MUL): New mask.
(DECLARE_INSN): New opcode.
* opcode/riscv.h (EXTRACT_ZCB_BYTE_UIMM): New inline func.
(EXTRACT_ZCB_HALFWORD_UIMM): Ditto.
(ENCODE_ZCB_BYTE_UIMM): Ditto.
(ENCODE_ZCB_HALFWORD_UIMM): Ditto.
(VALID_ZCB_BYTE_UIMM): Ditto.
(VALID_ZCB_HALFWORD_UIMM): Ditto.
(enum riscv_insn_class): New extension class.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): New operators.
* riscv-opc.c: New instructions.
Zvksh is part of the vector crypto extensions.
This extension adds the following instructions:
- vsm3me.vv
- vsm3c.vi
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvksh.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvksh.d: New test.
* testsuite/gas/riscv/zvksh.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSM3C_VI): New.
(MASK_VSM3C_VI): New.
(MATCH_VSM3ME_VV): New.
(MASK_VSM3ME_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvksh.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvksh instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvksed is part of the vector crypto extensions.
This extension adds the following instructions:
- vsm4k.vi
- vsm4r.[vv,vs]
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvksed.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvksed.d: New test.
* testsuite/gas/riscv/zvksed.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSM4K_VI): New.
(MASK_VSM4K_VI): New.
(MATCH_VSM4R_VS): New.
(MASK_VSM4R_VS): New.
(MATCH_VSM4R_VV): New.
(MASK_VSM4R_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvksed.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvksed instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvknh[a,b] are parts of the vector crypto extensions.
This extension adds the following instructions:
- vsha2ms.vv
- vsha2c[hl].vv
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvknh[a,b].
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvknha.d: New test.
* testsuite/gas/riscv/zvknha_zvknhb.s: New test.
* testsuite/gas/riscv/zvknhb.d: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSHA2CH_VV): New.
(MASK_VSHA2CH_VV): New.
(MATCH_VSHA2CL_VV): New.
(MASK_VSHA2CL_VV): New.
(MATCH_VSHA2MS_VV): New.
(MASK_VSHA2MS_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvknh[a,b].
opcodes/ChangeLog:
* riscv-opc.c: Add Zvknh[a,b] instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvkg is part of the vector crypto extensions.
This extension adds the following instructions:
- vghsh.vv
- vgmul.vv
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvkg.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvkg.d: New test.
* testsuite/gas/riscv/zvkg.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VGHSH_VV): New.
(MASK_VGHSH_VV): New.
(MATCH_VGMUL_VV): New.
(MASK_VGMUL_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvkg.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvkg instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch adds support for the RISC-V Zfa extension,
which introduces additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of FP registers in case XLEN < FLEN
* fleq/fltq (quiet comparison instructions)
Zfa defines its instructions in combination with the following
extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
This patch is based on an earlier version from Tsukasa OI:
https://sourceware.org/pipermail/binutils/2022-September/122939.html
Most significant change to that commit is the switch from the rs1-field
value to the actual floating-point value in the last operand of the fli*
instructions. Everything that strtof() can parse is accepted and
the '%a' printf specifier is used to output hex floating-point literals
in the disassembly.
The Zfa specification is frozen (and has passed public review). It is
available as a chapter in "The RISC-V Instruction Set Manual: Volume 1":
https://github.com/riscv/riscv-isa-manual/releases
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for 'Zfa' extension.
(riscv_multi_subset_supports_ext): Likewise.
(riscv_implicit_subsets): Add 'Zfa' -> 'F' dependency.
gas/ChangeLog:
* config/tc-riscv.c (flt_lookup): New helper to lookup a float value
in an array.
(validate_riscv_insn): Add 'Wfv' as new format string directive.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Add floating-point chapter and describe
limiations of the Zfa FP literal parsing.
* testsuite/gas/riscv/zfa-32.d: New test.
* testsuite/gas/riscv/zfa-32.s: New test.
* testsuite/gas/riscv/zfa-64.d: New test.
* testsuite/gas/riscv/zfa-64.s: New test.
* testsuite/gas/riscv/zfa-fail.d: New test.
* testsuite/gas/riscv/zfa-fail.l: New test.
* testsuite/gas/riscv/zfa-fail.s: New test.
* testsuite/gas/riscv/zfa.d: New test.
* testsuite/gas/riscv/zfa.s: New test.
* testsuite/gas/riscv/zfa.s: New test.
* opcode/riscv-opc.h (MATCH_FLI_H): New.
(MASK_FLI_H): New.
(MATCH_FMINM_H): New.
(MASK_FMINM_H): New.
(MATCH_FMAXM_H): New.
(MASK_FMAXM_H): New.
(MATCH_FROUND_H): New.
(MASK_FROUND_H): New.
(MATCH_FROUNDNX_H): New.
(MASK_FROUNDNX_H): New.
(MATCH_FLTQ_H): New.
(MASK_FLTQ_H): New.
(MATCH_FLEQ_H): New.
(MASK_FLEQ_H): New.
(MATCH_FLI_S): New.
(MASK_FLI_S): New.
(MATCH_FMINM_S): New.
(MASK_FMINM_S): New.
(MATCH_FMAXM_S): New.
(MASK_FMAXM_S): New.
(MATCH_FROUND_S): New.
(MASK_FROUND_S): New.
(MATCH_FROUNDNX_S): New.
(MASK_FROUNDNX_S): New.
(MATCH_FLTQ_S): New.
(MASK_FLTQ_S): New.
(MATCH_FLEQ_S): New.
(MASK_FLEQ_S): New.
(MATCH_FLI_D): New.
(MASK_FLI_D): New.
(MATCH_FMINM_D): New.
(MASK_FMINM_D): New.
(MATCH_FMAXM_D): New.
(MASK_FMAXM_D): New.
(MATCH_FROUND_D): New.
(MASK_FROUND_D): New.
(MATCH_FROUNDNX_D): New.
(MASK_FROUNDNX_D): New.
(MATCH_FLTQ_D): New.
(MASK_FLTQ_D): New.
(MATCH_FLEQ_D): New.
(MASK_FLEQ_D): New.
(MATCH_FLI_Q): New.
(MASK_FLI_Q): New.
(MATCH_FMINM_Q): New.
(MASK_FMINM_Q): New.
(MATCH_FMAXM_Q): New.
(MASK_FMAXM_Q): New.
(MATCH_FROUND_Q): New.
(MASK_FROUND_Q): New.
(MATCH_FROUNDNX_Q): New.
(MASK_FROUNDNX_Q): New.
(MATCH_FLTQ_Q): New.
(MASK_FLTQ_Q): New.
(MATCH_FLEQ_Q): New.
(MASK_FLEQ_Q): New.
(MATCH_FCVTMOD_W_D): New.
(MASK_FCVTMOD_W_D): New.
(MATCH_FMVH_X_D): New.
(MASK_FMVH_X_D): New.
(MATCH_FMVH_X_Q): New.
(MASK_FMVH_X_Q): New.
(MATCH_FMVP_D_X): New.
(MASK_FMVP_D_X): New.
(MATCH_FMVP_Q_X): New.
(MASK_FMVP_Q_X): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction
classes for the Zfa extension.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Add support for
new format string directive 'Wfv'.
* riscv-opc.c: Add Zfa instructions.
Co-Developed-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Co-Developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Ventana Micro has published the specification for their
XVentanaCondOps ("conditional ops") extension at
https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf
which contains two new instructions
- vt.maskc
- vt.maskcn
that can be used in constructing branchless sequences for
various conditional-arithmetic, conditional-logical, and
conditional-select operations.
To support such vendor-defined instructions in the mainline binutils,
this change also adds a riscv_supported_vendor_x_ext secondary
dispatch table (but also keeps the behaviour of allowing any unknow
X-extension to be specified in addition to the known ones from this
table).
As discussed, this change already includes the planned/agreed future
requirements for X-extensions (which are likely to be captured in the
riscv-toolchain-conventions repository):
- a public specification document is available (see above) and is
referenced from the gas-documentation
- the naming follows chapter 27 of the RISC-V ISA specification
- instructions are prefixed by a vendor-prefix (vt for Ventana)
to ensure that they neither conflict with future standard
extensions nor clash with other vendors
bfd/ChangeLog:
* elfxx-riscv.c (riscv_get_default_ext_version): Add riscv_supported_vendor_x_ext.
(riscv_multi_subset_supports): Recognize INSN_CLASS_XVENTANACONDOPS.
gas/ChangeLog:
* doc/c-riscv.texi: Add section to list custom extensions and
their documentation URLs.
* testsuite/gas/riscv/x-ventana-condops.d: New test.
* testsuite/gas/riscv/x-ventana-condops.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h Add vt.maskc and vt.maskcn.
* opcode/riscv.h (enum riscv_insn_class): Add INSN_CLASS_XVENTANACONDOPS.
opcodes/ChangeLog:
* riscv-opc.c: Add vt.maskc and vt.maskcn.
Series-version: 1
Series-to: binutils@sourceware.org
Series-cc: Kito Cheng <kito.cheng@sifive.com>
Series-cc: Nelson Chu <nelson.chu@sifive.com>
Series-cc: Greg Favor <gfavor@ventanamicro.com>
Series-cc: Christoph Muellner <cmuellner@gcc.gnu.org>
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
This commit adds 'Ssstateen' extension, which is a supervisor-visible view
of the 'Smstateen' extension. It means, this extension implements sstateen*
and hstateen* CSRs of the 'Smstateen' extension.
Note that 'Smstateen' extension itself is unchanged but due to
implementation simplicity, it is implemented so that 'Smstateen' implies
'Ssstateen' (just like 'M' implies 'Zmmul').
This is based on the latest version of RISC-V Profiles
(version 0.9-draft, Frozen):
<226b7f6430>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Update implication rules.
(riscv_supported_std_s_ext) Add 'Ssstateen' extension.
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Rename
CSR_CLASS_SMSTATEEN_AND_H{,_32} to CSR_CLASS_SSSTATEEN_...
Add CSR_CLASS_SSSTATEEN.
(riscv_csr_address): Support new/renamed CSR classes.
* testsuite/gas/riscv/csr.s: Add 'Ssstateen' extension to comment.
* testsuite/gas/riscv/csr-version-1p9p1.l: Reflect changes to
error messages.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/ssstateen-csr.s: Test for 'Ssstateen' CSRs.
* testsuite/gas/riscv/ssstateen-csr.d: Likewise.
* testsuite/gas/riscv/smstateen-csr-s.d: Test to make sure that
supervisor/hypervisor part of 'Smstateen' CSRs are accessible from
'RV32IH_Smstateen', not just from 'RV32IH_Ssstateen' that is tested
in ssstateen-csr.d.
include/ChangeLog:
* opcode/riscv-opc.h: Update DECLARE_CSR declarations with
new CSR classes.
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemPair extension, a collection of T-Head specific
two-GP-register memory operations.
The 'th' prefix and the "XTheadMemPair" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemIdx extension, a collection of T-Head specific
GPR memory access instructions.
The 'th' prefix and the "XTheadMemIdx" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 44 instructions
(BU,HU,WU only for loads (zero-extend instead of sign-extend)):
* {L,S}{D,W,WU,H,HU,B,BU}{IA,IB} rd, rs1, imm5, imm2
* {L,S}R{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
* {L,S}UR{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadFMemIdx extension, a collection of
T-Head-specific floating-point memory access instructions.
The 'th' prefix and the "XTheadFMemIdx" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMac extension, a collection of
T-Head-specific multiply-accumulate instructions.
The 'th' prefix and the "XTheadMac" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCondMov extension, a collection of
T-Head-specific conditional move instructions.
The 'th' prefix and the "XTheadCondMov" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XThead{Ba,Bb,Bs} extensions, a collection of
T-Head-specific bitmanipulation instructions.
The 'th' prefix and the "XThead{Ba,Bb,Bs}" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadSync extension, a collection of
T-Head-specific multi-processor synchronization instructions.
The 'th' prefix and the "XTheadSync" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCmo extension, a collection of T-Head specific
cache management operations.
The 'th' prefix and the "XTheadCmo" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 21 instructions:
* DCACHE.{C,CI,I}ALL
* DCACHE.{C,CI,I}{PA,VA,SW} rs1
* DCACHE.C{PAL1,VAL1} rs1
* ICACHE.I{ALL,ALLS}
* ICACHE.I{PA,VA} rs1
* L2CACHE.{C,CI,I}ALL
Contrary to Zicbom, the XTheadCmo instructions don't have a constant
displacement, therefore we have a different syntax for the arguments.
To clarify this is intended behaviour, there is a set of negative test
for Zicbom-style arguments in x-thead-cmo-fail.s.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
v2:
- Add missing DECLARE_INSN() list
- Fix ordering
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
