These were renamed from bfd_read and bfd_write back in 2001 when they
lost an unnecessary parameter. Rename them back, and get rid of a few
casts that are only needed without prototyped functions (K&R C).
According to the reporter of this bug the newlib fseek implementation
is likely slowed down by locking and fflush, only attempting to
optimise seeks when the file is opened read-only. Thus when writing
the output we get a dramatic slowdown due to commit 014a602b86.
PR 30724
* bfd.c (enum bfd_last_io): New.
(struct bfd): Add last_io field.
* bfd-in2.h: Regenerate.
* bfd-io.c (bfd_bread, bfd_bwrite): Force seek if last_io is
opposite direction.
(bfd_seek): Reinstate optimisation for seek to same position.
This patch adds support for the V4 BPF instruction jal/gotol, which is
like ja/goto but it supports a signed 32-bit PC-relative (in number of
64-bit words minus one) target operand instead of the 16-bit signed
operand of the other instruction. This greatly increases the jump
range in BPF programs.
Tested in bpf-unkown-none.
bfd/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* reloc.c: New reloc BFD_RELOC_BPF_DISPCALL32.
* elf64-bpf.c (bpf_reloc_type_lookup): Handle the new reloc.
* libbfd.h (bfd_reloc_code_real_names): Regenerate.
gas/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (struct bpf_insn): New field `id'.
(md_assemble): Save the ids of successfully parsed instructions
and use the new BFD_RELOC_BPF_DISPCALL32 whenever appropriate.
(md_apply_fix): Adapt to the new BFD reloc.
* testsuite/gas/bpf/jump.s: Test JAL.
* testsuite/gas/bpf/jump.d: Likewise.
* testsuite/gas/bpf/jump-pseudoc.d: Likewise.
* testsuite/gas/bpf/jump-be.d: Likewise.
* testsuite/gas/bpf/jump-be-pseudoc.d: Likewise.
* doc/c-bpf.texi (BPF Instructions): Document new instruction
jal/gotol.
Document new operand type disp32.
include/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/bpf.h (enum bpf_insn_id): Add entry BPF_INSN_JAL.
(enum bpf_insn_id): Remove spurious entry BPF_INSN_CALLI.
opcodes/ChangeLog:
2023-07-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Add entry for jal.
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
For example, objcopy --set-section-flags .data=alloc,large will add
SHF_X86_64_LARGE to the .data section. Omitting "large" will drop the
SHF_X86_64_LARGE flag.
The bfd_section flag is named generically, SEC_ELF_LARGE, in case other
processors want to follow SHF_X86_64_LARGE. SEC_ELF_LARGE has the same
value as SEC_TIC54X_BLOCK used by coff.
bfd/
* section.c: Define SEC_ELF_LARGE.
* bfd-in2.h: Regenerate.
* elf64-x86-64.c (elf_x86_64_section_flags, elf_x86_64_fake_sections,
elf_x86_64_copy_private_section_data): New.
binutils/
* NEWS: Mention the new feature for objcopy.
* doc/binutils.texi: Mention "large".
* objcopy.c (parse_flags): Parse "large".
(check_new_section_flags): Error if "large" is used with a
non-x86-64 ELF target.
* testsuite/binutils-all/x86-64/large-sections.d: New.
* testsuite/binutils-all/x86-64/large-sections.s: New.
* testsuite/binutils-all/x86-64/large-sections-i386.d: New.
* testsuite/binutils-all/x86-64/large-sections-2.d: New.
* testsuite/binutils-all/x86-64/large-sections-2-x32.d: New.
The Allegrex CPU was created by Sony Interactive Entertainment to power
their portable console, the PlayStation Portable.
The pspdev organization maintains all sorts of tools to create software
for said device including documentation.
Signed-off-by: David Guillen Fandos <david@davidgf.net>
Add relax support and related relocs in bfd.
bfd/ChangeLog:
* bfd-in2.h: Add relocs related to relax.
* elfnn-loongarch.c (struct loongarch_elf_link_hash_table): New integer
pointer (data_segment_phase) to monitor the data segment phase.
(loongarch_elf_check_relocs): Swap B21/B26 reloc sequence.
(loongarch_elf_adjust_dynamic_symbol): Fix code format.
(loongarch_reloc_rewrite_imm_insn): Fix function call.
(perform_relocation): Handle new relocs related to relax.
(RELOCATE_CALC_PC32_HI20): Fix code format.
(RELOCATE_CALC_PC64_HI32): Likewise.
(loongarch_elf_relocate_section): Handle new relocs related to relax.
(loongarch_relax_delete_bytes): New function.
(loongarch_relax_pcala_addi): Likewise.
(loongarch_relax_pcala_ld): Likewise.
(bfd_elfNN_loongarch_set_data_segment_info): Likewise.
(loongarch_relax_align): Likewise.
(loongarch_elf_relax_section): Likewise.
(bfd_elfNN_bfd_relax_section): New macro define.
* elfxx-loongarch.c (reloc_bits): New bfd point parameter.
(reloc_bits_b16): Likewise.
(reloc_bits_b21): Likewise.
(reloc_bits_b26): Likewise.
(loongarch_adjust_reloc_bitsfield): Likewise.
(reloc_bits_pcrel20_s2): New function.
(loongarch_elf_add_sub_reloc): Likewise.
(loongarch_elf_add_sub_reloc_uleb128): Likewise.
(loongarch_write_unsigned_leb128): New function.
* elfxx-loongarch.h (loongarch_adjust_reloc_bitsfield): New bfd point
parameter.
(bfd_elf32_loongarch_set_data_segment_info): New declare.
(bfd_elf64_loongarch_set_data_segment_info): Likewise.
(loongarch_write_unsigned_leb128): Likewise.
* libbfd.h: Add relocs related to relax.
* reloc.c: Add relocs related to relax.
96d6e190e9
There are some known limitations for now,
* Do not shrink the length of the uleb128 value, even if the value is reduced
after relaxations. Also reports error if the length grows up.
* The R_RISCV_SET_ULEB128 needs to be paired with and be placed before the
R_RISCV_SUB_ULEB128.
bfd/
* bfd-in2.h: Regenerated.
* elfnn-riscv.c (perform_relocation): Perform R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128 relocations. Do not shrink the length of the
uleb128 value, and report error if the length grows up. Called the
generic functions, _bfd_read_unsigned_leb128 and _bfd_write_unsigned_leb128,
to encode the uleb128 into the section contents.
(riscv_elf_relocate_section): Make sure that the R_RISCV_SET_ULEB128
must be paired with and be placed before the R_RISCV_SUB_ULEB128.
* elfxx-riscv.c (howto_table): Added R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128.
(riscv_reloc_map): Likewise.
(riscv_elf_ignore_reloc): New function.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_RISCV_SET_ULEB128, BFD_RELOC_RISCV_SUB_ULEB128):
New relocations to support .uleb128 subtraction.
gas/
* config/tc-riscv.c (md_apply_fix): Added BFD_RELOC_RISCV_SET_ULEB128
and BFD_RELOC_RISCV_SUB_ULEB128.
(s_riscv_leb128): Updated to allow uleb128 subtraction.
(riscv_insert_uleb128_fixes): New function, scan uleb128 subtraction
expressions and insert fixups for them.
(riscv_md_finish): Called riscv_insert_uleb128_fixes for all sections.
include/
* elf/riscv.h ((R_RISCV_SET_ULEB128, (R_RISCV_SUB_ULEB128): Defined.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
* testsuite/ld-riscv-elf/uleb128*: New testcase for uleb128 subtraction.
binutils/
* testsuite/binutils-all/nm.exp: Updated since RISCV supports .uleb128.
bfd/doc/chew.c extracts documentation from source code comments
annotated with keywords, and generates much of bfd.h and libbfd.h from
those same comments. The docs have suffered from people (me too)
adding things like CODE_FRAGMENT to the source to put code into bfd.h
without realising that CODE_FRAGMENT also puts @example around said
code into the docs. So we have random senseless things in the docs.
This patch fixes that problem (well, the senseless things from
CODE_FRAGMENT), moves most of the code out of bfd-in.h, and improves a
few chew.c features. libbfd.h now automatically gets ATTRIBUTE_HIDDEN
prototypes, and indentation in bfd.h and libbfd.h is better.
These functions don't belong in opncls.c.
* libbfd-in.h (bfd_release): Delete prototype.
* opncls.c (bfd_alloc, bfd_zalloc, bfd_release): Move to..
* libbfd.c: ..here. Include objalloc.c and provide bfd_release
with a FUNCTION comment.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
bfd_elf_bfd_from_remote_memory is just a wrapper, and the function
could be implemented for other formats. Move it to opncls.c because
it acts a little like some of the other bfd_open* routines. Also give
it the usual FUNCTION etc. comment so prototypes and docs are handled
automatically.
* elf.c (bfd_elf_bfd_from_remote_memory): Move to..
* opncls.c: ..here, add FUNCTION comment.
* bfd-in.h (bfd_elf_bfd_from_remote_memory): Delete prototype.
* bfd-in2.h: Regenerate.
* hash.c (higher_prime_number): Use uint32_t param, return value,
tables and variables.
(bfd_default_hash_table_size): Make it an unsigned int.
(bfd_hash_set_default_size): Use unsigned int param and return.
* bfd-in.h (bfd_hash_set_default_size): Update prototype.
* bfd-in2.h: Regenerate.
The crc calculated is 32 bits. Replace uses of unsigned long with
uint32_t. Also use bfd_byte* for buffers.
bfd/
* opncls.c (bfd_calc_gnu_debuglink_crc32): Use stdint types.
(bfd_get_debug_link_info_1, bfd_get_debug_link_info): Likewise.
(separate_debug_file_exists, bfd_follow_gnu_debuglink): Likewise.
(bfd_fill_in_gnu_debuglink_section): Likewise.
* bfd-in2.h: Regenerate.
gdb/
* auto-load.c (auto_load_objfile_script): Update type of
bfd_get_debug_link_info argument.
* symfile.c (find_separate_debug_file_by_debuglink): Likewise.
* gdb_bfd.c (get_file_crc): Update type of
bfd_calc_gnu_debuglink_crc32 argument.
If pe_ILF_object_p succeeds, pe_ILF_build_a_bfd will have changed the
bfd from being file backed to in-memory. This can have unfortunate
results for targets checked by bfd_check_format_matches after that
point as they will be matching against the created in-memory image
rather than the file. bfd_preserve_restore also has a problem if it
flips the BFD_IN_MEMORY flag, because the flag affects iostream
meaning and should be set if using _bfd_memory_iovec. To fix these
problems, save and restore iostream and iovec along with flags, and
modify bfd_reinit to make the bfd file backed again. Restoring the
iovec and iostream allows the hack in bfd_reinit keeping BFD_IN_MEMORY
(part of BFD_FLAGS_SAVED) to be removed.
One more detail: If restoring from file backed to in-memory then the
bfd needs to be forcibly removed from the cache lru list, since after
the bfd becomes in-memory a bfd_close will delete the bfd's memory
leaving the lru list pointing into freed memory.
* cache.c (bfd_cache_init): Clear BFD_CLOSED_BY_CACHE here..
(bfd_cache_lookup_worker): ..rather than here.
(bfd_cache_close): Comment.
* format.c (struct bfd_preserve): Add iovec and iostream fields.
(bfd_preserve_save): Save them..
(bfd_preserve_restore): ..and restore them, calling
bfd_cache_close if the iovec differs.
(bfd_reinit): Add preserve param. If the bfd has been flipped
to in-memory, reopen the file. Restore flags.
* peicode.h (pe_ILF_cleanup): New function.
(pe_ILF_object_p): Return it.
* bfd.c (BFD_FLAGS_SAVED): Delete.
* bfd-in2.h: Regenerate.
This adds a new flag to the reloc howtos that can be used to
incrementally change targets over to simple bfd_install_relocation
that just installs the addend without any weird adjustments.
I've made a few other changes to bfd_install_relocation, removing dead
code and comments that are really only applicable to
bfd_perform_relocation.
There is also a reloc offset bounds check change. I've moved the
check to where data is accessed, as it seems reasonable to me to not
perform the check unless it is needed. There is precedence for this;
Relocations against absolute symbols already avoided the check.
I also tried always performing the reloc offset check, and ran into
testsuite failures due to _NONE and _ALIGN relocs at the end of
sections. These likely would be fixed if all such reloc howtos had
size set to zero, but I would rather not edit lots of files when it
involves checking that target code does not use the size.
* reloc.c (struct reloc_howto_struct): Add install_addend.
(HOWTO_INSTALL_ADDEND): Define.
(HOWTO): Init new field with HOWTO_INSTALL_ADDEND.
(bfd_install_relocation): Remove comments copied from
bfd_perform_relocation that aren't applicable here. Remove
code dealing with output_offset and output_section. Just set
relocation to addend if install_addend. Move reloc offset
bounds check to just before section data is accessed, avoiding
the check when data is not accessed.
* bfd-in2.h: Regenerate.
We already use C99's __func__ in places, use it more generally. This
patch doesn't change uses in the testsuite. I've also left one in
gold.h that is protected by GCC_VERSION < 4003. If any of the
remaining uses bothers anyone I invite patches.
bfd/
* bfd-in.h: Replace __FUNCTION__ with __func__.
* elf32-bfin.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfxx-sparc.c: Likewise.
* bfd-in2.h: Regenerate.
gas/
* config/tc-cris.c: Replace __FUNCTION__ with __func__.
* config/tc-m68hc11.c: Likewise.
* config/tc-msp430.c: Likewise.
gold/
* dwp.h: Replace __FUNCTION__ with __func__.
* gold.h: Likewise, except for use inside GCC_VERSION < 4003.
ld/
* emultempl/pe.em: Replace __FUNCTION__ with __func__.
* emultempl/pep.em: Likewise.
* pe-dll.c: Likewise.
Commit b1c95bc4dd resulted in
...bfd.texi:246: @include: could not find init.texi
which went unnoticed due to not building in a clean directory.
This fixes the problem by moving bfd_init earlier, giving it a
doc node, and stitching the nodes back together.
* bfd.c (bfd_init): Move earlier. Give it a doc inode.
Adjust other inodes to suit.
* doc/bfd.texi: Don't include init.texi. Adjust nodes to suit.
init.c contains just one function that doesn't do much. Move it to
bfd.c and give it something to do, initialising static state. So far
the only initialisation is for bfd.c static variables.
The idea behind reinitialising state is to see whether some set of
flaky oss-fuzz crashes go away. oss-fuzz stresses binutils in ways
that can't occur in reality, feeding multiple testcases into the
internals of binutils. So one testcase may affect the result of the
next testcase.
* init.c: Delete file. Move bfd_init to..
* bfd.c (bfd_init): ..here. Init static variables.
* Makefile.am (BFD32_LIBS): Remove init.lo.
(BFD32_LIBS_CFILES, BFD_H_FILES): Remove init.c.
* doc/local.mk: Remove mention of init.texi and init.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
This patch removes the bfd_malloc in default_indirect_link_order and
bfd_simple_get_relocated_section_contents, pushing the allocation down
to bfd_get_relocated_section_contents. The idea is to make use of the
allocation done with sanity checking in bfd_get_full_section_contents,
which is called by bfd_generic_get_relocated_section_contents.
Doing this exposed a bug in bfd_get_full_section_contents. With
relaxation it is possible that an input section rawsize is different
to the section size. In that case we want to use the larger of
rawsize (the on-disk size for input sections) and size.
* reloc.c (bfd_generic_get_relocated_section_contents),
* reloc16.c (bfd_coff_reloc16_get_relocated_section_contents),
* coff-alpha.c (alpha_ecoff_get_relocated_section_contents),
* coff-sh.c (sh_coff_get_relocated_section_contents),
* elf-m10200.c (mn10200_elf_get_relocated_section_contents),
* elf-m10300.c (mn10300_elf_get_relocated_section_contents),
* elf32-avr.c (elf32_avr_get_relocated_section_contents),
* elf32-cr16.c (elf32_cr16_get_relocated_section_contents),
* elf32-crx.c (elf32_crx_get_relocated_section_contents),
* elf32-h8300.c (elf32_h8_get_relocated_section_contents),
* elf32-nds32.c (nds32_elf_get_relocated_section_contents),
* elf32-sh.c (sh_elf_get_relocated_section_contents),
* elfxx-mips.c (_bfd_elf_mips_get_relocated_section_contents):
Handle NULL data buffer.
* bfd.c (bfd_get_section_alloc_size): New function.
* bfd-in2.h: Regenerate.
* compress.c (bfd_get_full_section_contents): Correct section
malloc size.
* linker.c (default_indirect_link_order): Don't malloc memory
here before calling bfd_get_relocated_section_contents.
* simple.c (bfd_simple_get_relocated_section_contents): Likewise.
Commit 5aa0f10c42 added a per_xvec_warn array to provide support for
warnings from elf_object_p (and a later patch for warnings from
pe_bfd_object_p) to be cached and then only printed if the target
matches. It was quite limited in the style of message supported, only
one message could be printed, and didn't really meet the stated aim of
only warning when a target matches: There are many other errors and
warnings that can be emitted by functions called from elf_object_p.
So this patch extends the error handler functions to support printing
to a string buffer, extends per_xvec_warn to support multiple errors/
warnings, and hooks this all into bfd_check_format_matches. If
bfd_check_format_matches succeeds then any errors/warnings are printed
for the matching target. If bfd_check_format_matches fails either due
to no match or to multiple matches and only one target vector produced
errors, then those errors are printed.
* bfd.c (MAX_ARGS): Define, use throughout.
(print_func): New typedef.
(_bfd_doprnt): Add new print param. Replace calls to fprintf
with print.
(PRINT_TYPE): Similarly.
(error_handler_fprintf): Renamed from error_handler_internal.
Use _bfd_get_error_program_name. Add fprintf arg. Move code
setting up args..
(_bfd_doprnt_scan): ..to here. Add ap param.
(struct buf_stream): New.
(err_sprintf): New function.
(error_handler_bfd): New static variable.
(error_handler_sprintf): New function.
(_bfd_set_error_handler_caching): New function.
(_bfd_get_error_program_name): New function.
* elfcode.h (elf_swap_shdr_in): Use _bfd_error_handler in
warning messages.
(elf_object_p): Likewise.
* format.c (print_warnmsg): New function.
(clear_warnmsg): Rewrite.
(null_error_handler): New function.
(bfd_check_format_matches): Ignore warnings from recursive calls
checking first element of an archive. Use caching error handler
otherwise. Print warnings on successful match, or when only one
target has emitted warnings/errors.
* peicode.h (pe_bfd_object_p): Use _bfd_error_handler in
warning messages.
* targets.c (per_xvec_warn): Change type of array elements.
(struct per_xvec_message): New.
(_bfd_per_xvec_warn): Rewrite.
* Makefile.am (LIBBFD_H_FILES): Add bfd.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
Tidies:
- Move stuff from bfd-in.h and libbfd.c to compress.c
- Delete COMPRESS_DEBUG from enum compressed_debug_section_type
- Move compress_debug field out of link_info to ld_config.
Fixes:
- Correct test in bfd_convert_section_setup to use obfd flags,
not ibfd.
- Apply bfd_applicable_file_flags to compression bfd flags added
by gas and ld to the output bfd.
bfd/
* bfd-in.h (enum compressed_debug_section_type),
(struct compressed_type_tuple),
(bfd_get_compression_algorithm),
(bfd_get_compression_algorithm_name),
* libbfd.c (compressed_debug_section_names),
(bfd_get_compression_algorithm),
(bfd_get_compression_algorithm_name): Move..
* compress.c: ..to here, deleting COMPRESS_DEBUG from
enum compressed_debug_section_type.
(bfd_convert_section_setup): Test obfd flags not ibfd for
compression flags.
* elf.c (elf_fake_sections): Replace link_info->compress_debug
test with abfd->flags test.
* bfd-in2.h: Regenerate.
binutils/
* objcopy.c (copy_file): Tidy setting of bfd compress flags.
Expand comment.
gas/
* write.c (compress_debug): Test bfd compress flags rather than
flag_compress_debug.
(write_object_file): Apply bfd_applicable_file_flags to compress
debug flags added to output bfd.
include/
* bfdlink.h (struct bfd_link_info): Delete compress_debug.
ld/
* ld.h (ld_config_type): Add compress_debug.
* emultempl/elf.em: Replace references to link_info.compress_debug
with config.compress_debug.
* lexsup.c (elf_static_list_options): Likewise.
* ldmain.c (main): Likewise. Apply bfd_applicable_file_flags
to compress debug flags added to output bfd.
This flag also isn't needed, except for some sanity checks which we
can omit.
* elf.c (elf_fake_sections): Don't set SEC_ELF_COMPRESS for
compressed debug sections, just leave sh_name as -1.
(assign_file_positions_for_non_load_sections),
(assign_file_positions_except_relocs): Decide whether a section
needs compressing and thus should not have its file offset set
by looking at sh_name.
(_bfd_elf_assign_file_positions_for_non_load): Similarly decide
which sections need compressing.
* elflink.c (bfd_elf_final_link): Don't test SEC_ELF_COMPRESS.
* merge.c (_bfd_write_merged_section): Likewise.
* section.c (SEC_ELF_COMPRESS): Don't define.
(SEC_ELF_PURECODE): Renumber.
* bfd-in2.h: Regenerate.
SEC_ELF_RENAME is a flag used to effect section name changes when
compressing/decompressing zlib-gnu debug sections. This can be
accomplished more directly in one of the objcopy specific bfd
functions. Renaming for ld input is simplified too. Ld input object
files always have BFD_DECOMPRESS set.
bfd/
* compress.c (bfd_convert_section_size): Rename to..
(bfd_convert_section_setup): ..this. Handle objcopy renaming
of compressed/decompressed debug sections.
* elf.c (_bfd_elf_make_section_from_shdr): Only rename zdebug
input for linker.
(elf_fake_sections): Don't handle renaming of debug sections for
objcopy here.
* section.c (SEC_ELF_RENAME): Delete.
* bfd-in2.h: Regenerate.
binutils/
* objcopy.c (setup_section): Call bfd_convert_section_setup.
Don't call bfd_convert_section_size.
Define an enum instead of using ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD
in bfd and binutils, and move some functions from bfd.c to compress.c.
When looking at the COFF/PE debug compression support, I wondered
about extending it to support zstd. I likely won't do that, but
the compression header ch_type field isn't just ELF specific if these
headers are to be used in COFF/PE too.
bfd/
* bfd.c (bfd_update_compression_header),
(bfd_check_compression_header, bfd_get_compression_header_size),
(bfd_convert_section_size, bfd_convert_section_contents): Move to..
* compress.c: ..here.
(enum compression_type): New. Use it throughout file.
* elf.c (_bfd_elf_make_section_from_shdr): Replace uses of
ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with ch_compress_zlib and
ch_compress_zstd.
* bfd-in2.h: Regenerate.
binutils/
* readelf.c (process_section_headers, dump_section_as_strings),
(dump_section_as_bytes, load_specific_debug_section): Replace
uses of ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with
ch_compress_zlib and ch_compress_zstd.
Move a couple of elf.c functions to compress.c.
* compress.c (bfd_debug_name_to_zdebug): New inline function.
(bfd_zdebug_name_to_debug): Likewise.
* elf.c (convert_debug_to_zdebug, convert_zdebug_to_debug): Delete.
(_bfd_elf_make_section_from_shdr, elf_fake_sections),
(_bfd_elf_assign_file_positions_for_non_load): Adjust to suit.
* coffgen.c (make_a_section_from_file): Use new inlines here.
The linker merges all the input .sframe sections. When merging, the
linker verifies that all the input .sframe sections have the same
abi/arch.
The linker uses libsframe library to perform key actions on the
.sframe sections - decode, read, and create output data. This
implies buildsystem changes to make and install libsframe before
libbfd.
The linker places the output .sframe section in a new segment of its
own: PT_GNU_SFRAME. A new segment is not added, however, if the
generated .sframe section is empty.
When a section is discarded from the final link, the corresponding
entries in the .sframe section for those functions are also deleted.
The linker sorts the SFrame FDEs on start address by default and sets
the SFRAME_F_FDE_SORTED flag in the .sframe section.
This patch also adds support for generation of SFrame unwind
information for the .plt* sections on x86_64. SFrame unwind info is
generated for IBT enabled PLT, lazy/non-lazy PLT.
The existing linker option --no-ld-generated-unwind-info has been
adapted to include the control of whether .sframe unwind information
will be generated for the linker generated sections like PLT.
Changes to the linker script have been made as necessary.
ChangeLog:
* Makefile.def: Add install dependency on libsframe for libbfd.
* Makefile.in: Regenerated.
* bfd/Makefile.am: Add elf-sframe.c
* bfd/Makefile.in: Regenerated.
* bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated.
* bfd/configure: Regenerate.
* bfd/configure.ac: Add elf-sframe.lo.
* bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct.
(struct sframe_dec_info): Likewise.
(struct sframe_enc_info): Likewise.
(struct elf_link_hash_table): New member for encoded .sframe
object.
(struct output_elf_obj_tdata): New member.
(elf_sframe): New access macro.
(_bfd_elf_set_section_sframe): New declaration.
* bfd/elf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
(bfd_section_from_phdr): Likewise.
(get_program_header_size): Likewise.
(_bfd_elf_map_sections_to_segments): Likewise.
* bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add
contents to the .sframe sections or .plt* entries.
* bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle
SEC_INFO_TYPE_SFRAME.
(_bfd_elf_default_action_discarded): Handle .sframe section.
(elf_link_input_bfd): Merge .sframe section.
(bfd_elf_final_link): Write the output .sframe section.
(bfd_elf_discard_info): Handle discarding .sframe section.
* bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create
.sframe section for .plt and .plt.sec.
(_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from
.plt* sections.
* bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New
definition.
(SFRAME_PLT0_MAX_NUM_FRES): Likewise.
(SFRAME_PLTN_MAX_NUM_FRES): Likewise.
(struct elf_x86_sframe_plt): New structure.
(struct elf_x86_link_hash_table): New member.
(struct elf_x86_init_table): New members for .sframe
creation.
* bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME.
* binutils/readelf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
* ld/ld.texi: Update documentation for
--no-ld-generated-unwind-info.
* ld/scripttempl/elf.sc: Support .sframe sections.
* ld/Makefile.am (TESTSFRAMELIB): Use it.
(check-DEJAGNU): Likewise.
* ld/Makefile.in: Regenerated.
* ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB.
* ld/configure: Regenerated.
* bfd/elf-sframe.c: New file.
include/ChangeLog:
* elf/common.h (PT_GNU_SFRAME): New definition.
* elf/internal.h (struct elf_segment_map): Handle new segment
type PT_GNU_SFRAME.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB.
* ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test
sframe-simple-1.
* ld/testsuite/ld-aarch64/sframe-bar.s: New file.
* ld/testsuite/ld-aarch64/sframe-foo.s: Likewise.
* ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-sframe/sframe-empty.d: New test.
* ld/testsuite/ld-sframe/sframe-empty.s: New file.
* ld/testsuite/ld-sframe/sframe.exp: New testsuite.
* ld/testsuite/ld-x86-64/sframe-bar.s: New file.
* ld/testsuite/ld-x86-64/sframe-foo.s: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/x86-64.exp: Add new tests -
sframe-simple-1, sframe-plt-1.
* ld/testsuite/lib/ld-lib.exp: Add new proc to check if
assembler supports SFrame section.
* ld/testsuite/ld-sframe/discard.d: New file.
* ld/testsuite/ld-sframe/discard.ld: Likewise.
* ld/testsuite/ld-sframe/discard.s: Likewise.
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE.
Based on initial work by Jedidiah Thompson
Co-authored-by: Jedidiah Thompson <wej22007@outlook.com>
Co-authored-by: Zac Walker <zac.walker@linaro.org>
So we had a zlib-gabi .debug_info section that increased in size with
zstd, so much so that it was better to leave the section
uncompressed. Things went horribly wrong when the section was read
again later. The section was read again off disk using the
uncompressed size. So you get the zlib section again with some
garbage at the end. Fix that particular problem by setting the
section flag SEC_IN_MEMORY. Any future read will get sec->contents.
Also, if the section is to be left uncompressed, the input
SHF_COMPRESSED flag needs to be reset otherwise objcopy will copy it
to output.
Finally, bfd_convert_section_contents needed a small update to handle
zstd compressed sections, and I've deleted bfd_cache_section_contents.
* bfd.c (bfd_convert_section_contents): Handle zstd.
* compress.c (bfd_compress_section_contents): When section
contents are uncompressed set SEC_IN_MEMORY flag,
compress_status to COMRESS_SECTION_NONE, and clear
SHF_COMPRESSED. Set SEC_IN_MEMORY for compressed contents.
(bfd_get_full_section_contents): Don't check section size
against file size when SEC_IN_MEMORY.
(bfd_cache_section_contents): Delete function.
* elf32-arm.c (elf32_arm_get_synthetic_symtab): Expand
bfd_cache_section_contents here.
* bfd-in2.h: Regenerate.
bfd/ChangeLog:
* bfd-in.h (bfd_hash_set_default_size): Add COMPRESS_UNKNOWN
enum value.
(struct compressed_type_tuple): New.
* bfd-in2.h (bfd_hash_set_default_size): Regenerate.
(struct compressed_type_tuple): Likewise.
* libbfd.c (ARRAY_SIZE): New macro.
(bfd_get_compression_algorithm): New function.
(bfd_get_compression_algorithm_name): Likewise.
gas/ChangeLog:
* as.c: Do not special-case, use the new functions.
ld/ChangeLog:
* emultempl/elf.em: Do not special-case, use the new functions.
* lexsup.c (elf_static_list_options): Likewise.
Commit 2cac01e3ff lacked support for objcopy changing compression
style. Add that support, which meant a rewrite of
bfd_compress_section_contents. In the process I've fixed some memory
leaks.
* compress.c (bfd_is_section_compressed_info): Rename from
bfd_is_section_compressed_with_header and add ch_type param
to return compression header ch_type field.
Update all callers.
(decompress_section_contents): Remove buffer and size params.
Rewrite. Update callers.
(bfd_init_section_compress_status): Free contents on failure.
(bfd_compress_section): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Support objcopy
changing between any of the three compression schemes. Report
"unable to compress/decompress" rather than "unable to
initialize compress/decompress status" on compress/decompress
failures.
* bfd-in2.h: Regenerate.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
bfd_find_nearest_line_with_alt functions like bfd_find_nearest_line with
the addition of a parameter for specifying the filename of a supplementary
debug file such as one referenced by .gnu_debugaltlink or .debug_sup.
This patch focuses on implementing bfd_find_nearest_line_with_alt
support for ELF/DWARF2 .gnu_debugaltlink. For other targets this
function simply sets the invalid_operation bfd_error.
Don't overload bfd_reloc_outofrange with what is really a domain error
(target at odd address), or an overflow.
PR 11290
* reloc.c (bfd_reloc_other): Correct comment.
* elf32-avr.c (avr_final_link_relocate): Return bfd_reloc_other
for unaligned reloc target values. Return bfd_reloc_overflow
when stubs are too far away and when R_AVR_LDS_STS_16,
R_AVR_PORT6, or R_AVR_PORT5 overflow.
(elf32_avr_relocate_section): Report more descriptive relocation
errors.
* bfd-in2.h: Regenerate.
bfd_set_section_alignment currently always returns true. This patch
changes it to return false on silly alignment values, avoiding yet
another way to trigger ubsan errors like coffcode.h:3192:12: runtime
error: shift exponent 299 is too large for 32-bit type 'int'. We'll
catch that one in objcopy.c:setup_sections. However, setup_sections
gives up on other setup operations that are necessary even after an
error of some sort. Change that to keep going, which might change the
error message but that shouldn't matter in the least.
bfd/
* section.c (bfd_set_section_alignment): Return false and
don't set alignment_power for stupidly large alignments.
* bfd-in2.h: Regenerate.
* coffcode.h (coff_compute_section_file_positions): Don't use
an int constant when calculating alignment.
binutils/
* objcopy.c (setup_section): Keep on going after hitting
non-fatal errors.
