Swap AM_PO_SUBDIRS and ZW_GNU_GETTEXT_SISTER_DIR lines in
*/configure.ac. ZW_GNU_GETTEXT_SISTER_DIR indirectly invokes
AC_REQUIRE(AM_PO_SUBDIRS) so results in AM_PO_SUBDIRS being emitted
before ZW_GNU_GETTEXT_SISTER_DIR if it hasn't already been invoked.
This patch support RISC-V Privileged Architecture 1.13 CSRs 'medelegh' and
'hedelegh'. More details between 1.12 and 1.13 see [1].
[1] https://github.com/riscv/riscv-isa-manual/blob/main/src/priv-preface.adoc
Version log: Remove gas/po changes.
bfd/ChangeLog:
* cpu-riscv.c: New option.
* cpu-riscv.h (enum riscv_spec_class): Ditto.
binutils/ChangeLog:
* doc/binutils.texi: New option.
gas/ChangeLog:
* NEWS: Add priv-1.13 support.
* config/tc-riscv.c: New option.
* configure: Ditto.
* configure.ac: Ditto.
* testsuite/gas/riscv/csr-version-1p10.d: New CSR.
* testsuite/gas/riscv/csr-version-1p10.l: New warning.
* testsuite/gas/riscv/csr-version-1p11.d: New CSR.
* testsuite/gas/riscv/csr-version-1p11.l: New warning.
* testsuite/gas/riscv/csr-version-1p12.d: New CSR.
* testsuite/gas/riscv/csr-version-1p12.l: New warning.
* testsuite/gas/riscv/csr.s: New CSR.
* testsuite/gas/riscv/attribute-15.d: New test.
* testsuite/gas/riscv/attribute-16.d: New test.
* testsuite/gas/riscv/csr-version-1p13.d: New test.
* testsuite/gas/riscv/csr-version-1p13.l: New test.
include/ChangeLog:
* opcode/riscv-opc.h (CSR_MEDELEGH): New CSR.
(CSR_HEDELEGH): Ditto.
(DECLARE_CSR): Ditto.
Fix broken commit 070961b377 ("MIPS: Set r6 as default arch if vendor
is img") that sets up GAS in an inconsistent way where "img" vendor has
been used with a 64-bit configuration, such as `mips64-img-linux-gnu'.
In that case GAS is set up to use a 64-bit ABI by default combined with
the MIPS32r6 CPU, which is 32-bit.
Consequently GAS always fails to assemble even trivial input, producing
a message such as:
Assembler messages:
Error: -march=mips32r6 is not compatible with the selected ABI
.../gas/testsuite/gas/all/nop.s:2: Error: `gp=32' used with a 64-bit ABI
unless the defaults have been suitably overridden either for the ABI or
the CPU.
Set the default CPU to MIPS64r6 for 64-bit "img" vendor configurations
then and adjust the GAS testsuite accordingly, removing 1048 FAIL and 3
ERROR regression test results for the `mips64-img-linux-gnu' and
`mips64el-img-linux-gnu' targets each.
Both ELF and COFF have various sub-flavors, each of which would then
require its own emulation: Right now when configuring a COFF/PE
secondary target (with perhaps an ELF primary one), one gets plain COFF
emulation rather than COFF/PE one.
As such a multitude of emulations would be unwieldy (and likely fragile)
drop gas emulations altogether instead.
Assembler shouldn't accept invalid TLS instructions, TLS relocations
can only be used with specific instructions as specified in TLS psABI
and linker issues an error when TLS relocations are used with wrong
instructions or format. Since it is inconvenient for gcc to rely on
linker to report errors, adding TLS check in the assembler stage so
that gcc can know TLS errors earlier.
gas/ChangeLog:
PR gas/32022
* config.in: Regenerate.
* config/tc-i386.c
*(enum x86_tls_error_type): New.
*(struct _i386_insn): Added has_gotrel to indicate whether TLS
relocations need to be checked.
(x86_check_tls_relocation): Added a new function to check TLS
relocation.
(x86_report_tls_error): Created a new function to report TLS error.
(i386_assemble): Handle x86_check_tls_relocation.
(lex_got): Set i.has_gotrel.
(OPTION_MTLS_CHECK): Added a new option to contrl TLS check.
(struct option): Ditto.
(md_parse_option): Ditto.
(md_show_usage): Ditto.
* configure.ac: Added a new option to check TLS relocation by
default.
* configure: Regenerated.
* doc/c-i386.texi: Document -mtls-check=.
* testsuite/gas/i386/i386.exp: Added new tests.
* testsuite/gas/i386/ilp32/ilp32.exp: Ditto.
* testsuite/gas/i386/ilp32/reloc64.d: Disable TLS check for it.
* testsuite/gas/i386/ilp32/x32-tls.d: Ditto.
* testsuite/gas/i386/inval-tls.l: Added more test cases.
* testsuite/gas/i386/inval-tls.s: Ditto.
* testsuite/gas/i386/reloc32.d: Disable TLS check for it.
* testsuite/gas/i386/reloc64.d: Ditto.
* testsuite/gas/i386/x86-64-inval-tls.l: Added more test cases.
* testsuite/gas/i386/x86-64-inval-tls.s: Ditto.
* testsuite/gas/i386/x86-64.exp: Added new tests.
* testsuite/gas/i386/ilp32/x32-inval-tls.l: New test.
* testsuite/gas/i386/ilp32/x32-inval-tls.s: Ditto.
* testsuite/gas/i386/ilp32/x86-64-tls.d: Ditto.
* testsuite/gas/i386/tls.d: Ditto.
* testsuite/gas/i386/tls.s: Ditto.
* testsuite/gas/i386/x86-64-tls.d: Ditto.
* testsuite/gas/i386/x86-64-tls.s: Ditto.
ld/ChangeLog:
PR gas/32022
* testsuite/ld-i386/tlsgdesc1.d: Disable TLS check for it.
* testsuite/ld-i386/tlsgdesc2.d: Ditto.
* testsuite/ld-i386/tlsie2.d: Ditto.
* testsuite/ld-i386/tlsie3.d: Ditto.
* testsuite/ld-i386/tlsie4.d: Ditto.
* testsuite/ld-i386/tlsie5.d: Ditto.
* testsuite/ld-i386/tlsgdesc3.d: Ditto.
* testsuite/ld-x86-64/tlsdesc3.d: Ditto.
* testsuite/ld-x86-64/tlsdesc4.d: Ditto.
* testsuite/ld-x86-64/tlsie2.d: Ditto.
* testsuite/ld-x86-64/tlsie3.d: Ditto.
* testsuite/ld-x86-64/tlsie5.d: Ditto.
* testsuite/ld-x86-64/tlsdesc5.d: Ditto.
the ABI section of the triple explicitly asks for N64,
and in fact GCC also does so.
It can fix the test failure:
FAIL: libdep test: did not get expected output from the linker
with Debian's mipsisa64r6el-linux-gnuabi64 toolchain.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
This behavior is used by downstream toolchain since 2014,
and has been in GCC since the same year.
We don't support mips64*-img* due to GCC doesn't support it,
and we believe that the multilib should be used for this case.
The new Synopsys ARCv3 ISA has a similar instruction format like
the old ARCv1 and ARCv2 ISA. Thus, the ARCv3 addition is using
whatever we have for old ARC processors plus some ARCv3 spcific mods.
To distinguish between various ARC variants, we introduced two new
configure defines named TARGET_ARCv3_32 and TARGET_ARCv3_64 which are
set when we choose either an ARC32 (ARCv3/32) ISA toolchain or an
ARC64 (ARCv3/64) ISA toolchain.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* gas/config/tc-arc.h: Selectively define default target macros.
* gas/configure.ac: Add ARC64 target.
* gas/configure.tgt: Likewise.
* gas/configure: Regenerate
* gas/config.in: Regenerate.
* gas/config/tc-arc.c (DEFAULT_ARCH): New macro.
(default_arch): New variable.
(md_pseudo_table): Add xword.
(md_shortopts): Only a few options are recognized by the new ARC64
assembler.
(md_longopts): Likewise.
(ARC_CPU_TYPE_A64x): New define.
(ARC_CPU_TYPE_A32x): Likewise.
(cpu_type): New arch field.
(selected_cpu): Update fields.
(arc_opcode_hash_entry_iterator_init): Formating.
(arc_opcode_hash_entry_iterator_next): Likewise.
(arc_select_cpu): Likewise.
(arc_option): Likewise.
(check_cpu_feature): Likewise.
(debug_exp): Recognize new expression operands.
(parse_reloc_symbol): Parse new signed/unsigend cases.
(parse_opcode_flags): Update for the case when the flags needs
insert/extract functions.
(find_opcode_match): Match new signed/unsigned 32-bit immediates.
(autodetect_attributes): PLT34 only available for ARC64.
(md_assemble): Extend match characters.
(declare_fp_set): New function.
(init_default_arch): Likewise.
(md_begin): Detect and initialize the correct CPU and coresponding
registers.
(md_pcrel_from_section): Add new relocs.
(arc_target_format): New function.
(md_apply_fix): Add new relocs.
(md_parse_option): Update options.
(arc_show_cpu_list): Update with ARC64 cpus.
(md_show_usage): Update messages.
(may_relax_expr): Add PLT34 case.
(assemble_insn): Update for ARC64.
(arc_make_nops): New function.
(arc_handle_align): Refurbish this function, use arc_make_nops.
(tc_arc_fix_adjustable): Update messages.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
Following the arrangement in GCC select a 64-bit ABI by default, either
n32 or n64, rather than o32 for `mipsisa64*-*-linux*' targets, just as
with the corresponding `mips64*-*-linux*' targets.
Make the n64 ABI the default for 64-bit Linux targets specified with
`-gnuabi64' suffix included in the target triplet, for configurations
such as the Debian mips64el and mips64r6el ports. Adjust testsuite
configuration accordingly.
There are the following regressions with the new target triplet:
mips64-linux-gnuabi64 +FAIL: readelf -S bintest
mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
mips64el-linux-gnuabi64 +FAIL: readelf -S bintest
mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
The `readelf' issue comes from a difference in section headers produced
that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template
does not match. While there has been a precedent it does not appear to
me that there is a clear advantage from adding more and more variations
to the template rather than forking the existing template into multiple
ones for a more exact match. So this is best deferred to a separate
discussion.
The MIPS reloc estimation issue is an actual bug in `objdump', which
discards a number of trailing entries from output here for n64 composed
relocations:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
0000000000000000 R_MIPS_NONE *ABS*
0000000000000000 R_MIPS_NONE *ABS*
and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not
match even though ELF output produced is correct according to `readelf':
Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000000000000 R_MIPS_NONE
Type2: R_MIPS_NONE
Type3: R_MIPS_NONE
000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2
Type2: R_MIPS_64
Type3: R_MIPS_NONE
As a genuine bug this has to be handled separately.
Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk>
bfd/
* config.bfd: Add `mips64*el-*-linux*-gnuabi64' and
`mips64*-*-linux*-gnuabi64' targets.
binutils/
* testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64'
targets.
* testsuite/binutils-all/objcopy.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/binutils-all/remove-relocs-01.d: Likewise.
* testsuite/binutils-all/remove-relocs-04.d: Likewise.
* testsuite/binutils-all/remove-relocs-05.d: Likewise.
* testsuite/binutils-all/remove-relocs-06.d: Likewise.
gas/
* configure.ac: Handle `mips64*-linux-gnuabi64' targets.
* configure: Regenerate.
* testsuite/gas/mips/compact-eh-eb-7.d: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/gas/mips/compact-eh-el-7.d: Likewise.
ld/
* configure.tgt: Add `mips64*el-*-linux-gnuabi64' and
`mips64*-*-linux-gnuabi64' targets.
* testsuite/ld-undefined/undefined.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise.
* testsuite/ld-mips-elf/compact-eh6.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64'
targets.
This reverts commit 32f1c80375. It had
two unrelated changes lumped together, one of which changed the meaning
of the `mipsisa64*-*-linux*' target triplets, which was not properly
evaluated.
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
Making target code depend on a host define like _AIX52 is never
correct, so out it goes. Also, sort some config.bfd entries a little
to make it more obvious there is a config difference between aix5.1
and aix5.2. These two changes should make no difference to anything
in binutils. The gas define of AIX_WEAK_SUPPORT on the other hand was
wrong, so fix that. Finally, fix some testsuite fails on aix < 5.2 by
simply not running the tests.
include/
* coff/internal.h (C_WEAKEXT): Don't depend on _AIX52.
bfd/
* coffcode.h (coff_slurp_symbol_table): Don't depend on _AIX52.
(coff_classify_symbol): Likewise.
* config.bfd: Sort some entries.
gas/
* configure.ac (AIX_WEAK_SUPPORT): Don't set for aix5.[01].
* configure: Regenerate.
* testsuite/gas/ppc/aix.exp (xcoff-visibility-1*) Don't run
for aix < 5.2.
This behavior is used by downstream toolchain since 2014.
We also set the default ABI for mips*-img-elf to O32.
The previous value is NO_ABI, which is not good default ABI.
We don't support mips64*-img* due to GCC doesn't support it,
and We believe that the multilib should be used for this case.
If the triple is mipsisa32r6* or mipsisa64r6*, ld/as should output
r6 objects by default.
The triples with vendor `img` should do same.
The examples include:
as xx.s -o xx.o
ld -r -b binary xx.dat -o xx.o
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is
used as the cpu name in triple.
Let's recognize them by `mips*64*(el)`.
For 64bit Ports, like Debian's mips64el and mips64r6el ports,
`gnuabi64` is used as the abi section.
Let's use N64 abi by default for the triple with gnuabi64.
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
After commit d8af286fff ("RISC-V: Drop the privileged spec v1.9
support.") has removed support for privileged spec v1.9, this removes
it from the documentation.
References: d8af286fff ("RISC-V: Drop the privileged spec v1.9 support.")
gas/ChangeLog:
* configure: Regenerate.
* configure.ac: Remove reference to priv spec 1.9.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
While support for the privileged spec was added in a63375ac33
("RISC-V: Hypervisor ext: support Privileged Spec 1.12"), the
documentation has not been updated. Add 1.12 to the relevant
documentation.
References: a63375ac33 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12")
gas/ChangeLog:
* config/tc-riscv.c: Add 1.12 to the usage message.
* configure: Regenerate.
* configure.ac: Add 1.12 to the help/usage message.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
Since gcc commit, 3c70b3ca1ef58f302bf8c16d9e7c7bb8626408bf, we now enable
elf attributes for all riscv targets by default in gcc. Therefore, I
think binutils should have the same behavior, in case users are writing
assembly files. If --enable-default-riscv-attribute isn't set, then we
enable the elf attributes for all riscv targets by default.
ChangLog:
binutils/
* testsuite/binutils-all/readelf.s: Add comments for riscv.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/readelf.s-64-unused: Likewise.
* testsuite/binutils-all/readelf.ss: Likewise.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
gas/
* configure.ac: If --enable-default-riscv-attribute isn't set,
then we enable the elf attributes for all riscv targets by
default.
* configure: Regenerated.
A number of targets, bfin, rl78, rx, can show odd failures when
bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a
build dir with existing objects. The problem is caused by
bfin-parse.o and similar not being recompiled and so using stale
BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on
bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have
been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c
BFD_RELOC_* values change, but that wasn't happening. The problem is
that automake generates a makefile that loads gas/config/.deps/
dependency file for objects with corresponding sources mentioned in
EXTRA_as_new_SOURCES. Unless we want to mess around generating
explicit dependencies, I think that mean moving some object files to
the build gas/config/. This patch does that, removing some hacks for
m68k-parse.c that should no longer be necessary, and removes some
rules that catered to old bison producing code that triggers compiler
warnings.
PR 23691
* Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c..
(TARGET_CPU_HFILES): ..and config/xtensa-relax.h..
(TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c,
and use alongside TARGET_CPU_CFILES.
(EXTRA_DIST): Update location of generated .c files.
(config/m68k-parse.c): New rule replacing m68k-parse.c rule.
(config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c),
(config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly.
(itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed
dependencies.
(itbl-parse.@OBJEXT@): Delete rule using NO_WERROR.
(itbl-parse.c, itbl-parse.h): Tidy.
* config/bfin-lex-wrapper.c: Include config/bfin-lex.c.
* config/bfin-lex.l: Include config/bfin-parse.h.
* configure.ac (extra_objects): Move object files corresponding
to .y and .l files now in config/ to config/.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
