Toolchain/binutils-gdb
1
0
Fork 0
forked from Imagelibrary/binutils-gdb
Code Pull Requests Activity

* configure: Update aclocal.m4 and re-run autoconf to get correct

Browse Source 
defs for BFD stuff.
	* remote-wiggler.c (wiggler_error):  Error codes are hex.  Also,
	fix default message generation.
This commit is contained in:
Stu Grossman
1996-09-05 08:33:28 +00:00
parent 0ca4776ee4
commit 5819f35dcf
3 changed files with 166 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
gdb/remote-wiggler.c
View File

@@ -198,19 +198,22 @@ wiggler_error (s, error_code)
switch (error_code)
{
case 1: s = "Unknown fault"; break;
case 2: s = "Power failed"; break;
case 3: s = "Cable disconnected"; break;
case 4: s = "Couldn't enter BDM"; break;
case 5: s = "Target stuck in reset"; break;
case 6: s = "Port not configured"; break;
case 7: s = "Write verify failed"; break;
case 11: s = "Bus error"; break;
case 12: s = "Checksum error"; break;
case 13: s = "Illegal command"; break;
case 14: s = "Parameter error"; break;
case 0x1: s = "Unknown fault"; break;
case 0x2: s = "Power failed"; break;
case 0x3: s = "Cable disconnected"; break;
case 0x4: s = "Couldn't enter BDM"; break;
case 0x5: s = "Target stuck in reset"; break;
case 0x6: s = "Port not configured"; break;
case 0x7: s = "Write verify failed"; break;
case 0x11: s = "Bus error"; break;
case 0x12: s = "Checksum error"; break;
case 0x13: s = "Illegal command"; break;
case 0x14: s = "Parameter error"; break;
case 0x15: s = "Internal error"; break;
case 0x16: s = "Register buffer error"; break;
default:
sprintf (buf, "Unknown error code %d", error_code);
s = buf;
}
error (s);