sim: mips: Add simulator support for mips32r6/mips64r6

2022-02-01  Ali Lown  <ali.lown@imgtec.com>
	    Andrew Bennett  <andrew.bennett@imgtec.com>
	    Dragan Mladjenovic  <dragan.mladjenovic@rt-rk.com>
	    Faraz Shahbazker  <fshahbazker@wavecomp.com>

sim/common/ChangeLog:
	* sim-bits.h (EXTEND9, EXTEND18 ,EXTEND19, EXTEND21,
	EXTEND26): New macros.

sim/mips/ChangeLog:
	* Makefile.in (IGEN_INCLUDE): Add mips3264r6.igen.
	* configure: Regenerate.
	* configure.ac: Support mipsisa32r6 and mipsisa64r6.
	(sim_engine_run): Pick simulator model from processor specified
	in e_flags.
	* cp1.c (value_fpr): Handle fmt_dc32.
	(fp_unary, fp_binary): Zero initialize locals.
	(update_fcsr, fp_classify, fp_rint, fp_r6_cmp, inner_fmac,
	fp_fmac, fp_min, fp_max, fp_mina, fp_maxa, fp_fmadd, fp_fmsub):
	New functions.
	(sim_fpu_class_mips_mapping): New.
	* cp1.h (fcsr_ABS2008_mask, fcsr_ABS2008_shift): New define.
	* interp.c (MIPSR6_P): New.
	(load_word): Allow unaligned memory access for MIPSR6.
	* micromips.igen (sc, scd): Adapt to new do_sc* helper signature.
	* mips.igen: Add *r6 models.
	(signal_if_cti, forbiddenslot32): New helpers.
	(delayslot32): Use signal_if_cti.
	(do_sc, do_scd); Add store_ll_bit parameter.
	(sc, scd): Adapt to previous change.
	(nal, beq, bal): New definitions for *r6.
	(sll): Split nop and ssnop cases into ...
	(nop, ssnop): New definitions.
	(loadstore_ea): Use the 32-bit compatibility adressing.
	(cache): Split logic into ...
	(do_cache): New helper.
	(check_fpu): Select IEEE 754-2008 mode for R6.
	(not_word_value, unpredictable, check_mt_hilo, check_mf_hilo,
	check_multi_hilo, check_div_hilo, check_u64, do_dmfc1b, add,
	li, addu, and, andi, bgez, bgtz, blez, bltz, bne, break, dadd,
	daddiu, daddu, dror, dror32, drorv, dsll, dsll32, dsllv, dsra,
	dsra32, dsrav, dsrl, dsrl32, dsub, dsubu, j, jal, jalr,
	jalr.hb, lb, lbu, ld, lh, lhu, lui, lw, lwu, nor, or, ori, ror,
	rorv, sb, sd, sh, sll, sllv, slt, slti, sltiu, sltu, sra, srav,
	srl, srlv, sub, subu, sw, sync, syscall, teq, tge, tgeu, tlt,
	tltu, tne, xor, xori, check_fmt_p, do_load_double,
	do_store_double, abs.FMT, add.FMT, ceil.l.FMT, ceil.w.FMT,
	cfc1, ctc1, cvt.d.FMT, cvt.l.FMT, cvt.w.FMT, div.FMT, dfmc1,
	dmtc1, floor.l.FMT, floor.w.FMT, ldc1, lwc1, mfc1, mov.FMT,
	mtc1, mul.FMT, recip.FMT, round.l.FMT, round.w.FMT, rsqrt.FMT,
	sdc1, sqrt.FMT, sub.FMT, swc1, trunc.l.FMT, trunc.w.FMT, bc0f,
	bc0fl, bc0t, bc0tl, dmfc0, dmtc0, eret, mfc0, mtc0, cop, tlbp,
	tlbr, tlbwi, tlbwr): Enable on *r6 models.
	* mips3264r2.igen (dext, dextm, dextu, di, dins, dinsm, dinsu,
	dsbh, dshd, ei, ext, mfhc1, mthc1, ins, seb, seh, synci, rdhwr,
	wsbh): Likewise.
	* mips3264r6.igen: New file.
	* sim-main.h (FP_formats): Add fmt_dc32.
	(FORBIDDEN_SLOT): New macros.
	(simFORBIDDENSLOT, FP_R6CMP_*, FP_R6CLASS_*): New defines.
	(fp_r6_cmp, fp_classify, fp_rint, fp_min, fp_max, fp_mina,
	fp_maxa, fp_fmadd, fp_fmsub): New declarations.
	(R6Compare, Classify, RoundToIntegralExact, Min, Max, MinA,
	MaxA, FusedMultiplyAdd, FusedMultiplySub): New macros. Wrapping
	previous declarations.

sim/testsuite/mips/ChangeLog:
	* basic.exp: Add r6-*.s tests.
	(run_r6_removed_test): New function.
	(run_endian_tests): New function.
	* hilo-hazard-3.s: Skip for mips*r6.
	* r2-fpu.s: New test.
	* r6-64.s: New test.
	* r6-branch.s: New test.
	* r6-forbidden.s: New test.
	* r6-fpu.s: New test.
	* r6-llsc-dp.s: New test.
	* r6-llsc-wp.s: New test.
	* r6-removed.csv: New test.
	* r6-removed.s: New test.
	* r6.s: New test.
	* utils-r6.inc: New inc.

sim/testsuite/mips/testutils.inc

@@ -148,3 +148,58 @@ _dowrite:
 	checkreg \reg, $1
 	.set pop
 	.endm
+
+
+	# Check hi-lo register pair against data stored at base+o1 and base+o2
+	# Clobbers $1 - $5
+	.macro checkpair lo, hi, base, w, o1, o2
+	move  $2, \lo
+	move  $3, \hi
+	.set noat
+	la   $1, \base
+	l\w	$4, \o1($1)
+	l\w	$5, \o2($1)
+	.set at
+	checkreg  $2, $4
+	checkreg  $3, $5
+	.endm
+
+	.macro checkpair_le_d lo, hi, base
+	checkpair \lo, \hi, \base, w, 0, 4
+	.endm
+
+	.macro checkpair_be_d lo, hi, base
+	checkpair \lo, \hi, \base, w, 4, 0
+	.endm
+
+	.macro checkpair_le_q lo, hi, base
+	checkpair \lo, \hi, \base, d, 0, 8
+	.endm
+
+	.macro checkpair_be_q lo, hi, base
+	checkpair \lo, \hi, \base, d, 8, 0
+	.endm
+
+	# Endian-ness for comparison is determined by reading a word at ec
+	.macro checkpair_xendian lo, hi, base, ec, w
+	.set noat
+	lw   $1, \ec
+	andi $1, $1, 0x1
+	# check endianess
+	beqz  $1, 2f
+	.set at
+1: # big endian
+	checkpair_be_\w \lo, \hi, \base
+	b 3f
+2: # little endian
+	checkpair_le_\w \lo, \hi, \base
+3:
+	.endm
+
+	.macro checkpair_qword lo, hi, base, oe
+	checkpair_xendian \lo, \hi, \base, \oe, q
+	.endm
+
+	.macro checkpair_dword lo, hi, base, oe
+	checkpair_xendian \lo, \hi, \base, \oe, d
+	.endm