forked from Imagelibrary/rtems
101 lines
2.3 KiB
C
101 lines
2.3 KiB
C
/**
|
|
* @file
|
|
* @brief S3C2400 Timer driver
|
|
*
|
|
* This uses timer 1 for timing measurments.
|
|
*/
|
|
|
|
/*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://www.rtems.org/license/LICENSE.
|
|
*/
|
|
|
|
#include <bsp.h>
|
|
#include <rtems.h>
|
|
#include <rtems/btimer.h>
|
|
#include <s3c24xx.h>
|
|
|
|
uint32_t g_start;
|
|
uint32_t g_freq;
|
|
|
|
bool benchmark_timer_find_average_overhead;
|
|
|
|
|
|
/*
|
|
* Set up Timer 1
|
|
*/
|
|
void benchmark_timer_initialize( void )
|
|
{
|
|
uint32_t cr;
|
|
|
|
/* stop TIMER1*/
|
|
cr=rTCON & 0xFFFFF0FF;
|
|
rTCON=(cr | (0x0 << 8));
|
|
|
|
/* set MUX for Timer1 to 1/2 */
|
|
cr=rTCFG1 & 0xFFFFFF0F;
|
|
rTCFG1=(cr | (0<<4));
|
|
|
|
/* input freq=PLCK/2 Mhz*/
|
|
g_freq = get_PCLK() / 2000;
|
|
rTCNTB1 = 0xFFFF;
|
|
|
|
/* start TIMER1 with manual reload */
|
|
cr=rTCON & 0xFFFFF0FF;
|
|
rTCON=(cr | (0x1 << 9));
|
|
rTCON=(cr | (0x1 << 8));
|
|
|
|
g_start = rTCNTO1;
|
|
}
|
|
|
|
/*
|
|
* The following controls the behavior of benchmark_timer_read().
|
|
*
|
|
* AVG_OVEREHAD is the overhead for starting and stopping the timer. It
|
|
* is usually deducted from the number returned.
|
|
*
|
|
* LEAST_VALID is the lowest number this routine should trust. Numbers
|
|
* below this are "noise" and zero is returned.
|
|
*/
|
|
|
|
#define AVG_OVERHEAD 0 /* It typically takes X.X microseconds */
|
|
/* (Y countdowns) to start/stop the timer. */
|
|
/* This value is in microseconds. */
|
|
#define LEAST_VALID 1 /* Don't trust a clicks value lower than this */
|
|
|
|
benchmark_timer_t benchmark_timer_read( void )
|
|
{
|
|
uint32_t t;
|
|
unsigned long long total;
|
|
|
|
t = rTCNTO1;
|
|
/*
|
|
* Total is calculated by taking into account the number of timer overflow
|
|
* interrupts since the timer was initialized and clicks since the last
|
|
* interrupts.
|
|
*/
|
|
|
|
total = (g_start - t);
|
|
|
|
/* convert to microseconds */
|
|
total = (total*1000) / g_freq;
|
|
|
|
if ( benchmark_timer_find_average_overhead == 1 ) {
|
|
return (int) total;
|
|
} else if ( total < LEAST_VALID ) {
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Somehow convert total into microseconds
|
|
*/
|
|
return (total - AVG_OVERHEAD);
|
|
}
|
|
|
|
void benchmark_timer_disable_subtracting_average_overhead(bool find_flag)
|
|
{
|
|
benchmark_timer_find_average_overhead = find_flag;
|
|
}
|
|
|