Files
rtems/make/custom/efi332.cfg
Joel Sherrill a902441a25 Patch from John S. Gwynne <jgwynne@mrcday.com> to correct minor
problems that prevented the 19990302 snapshot from running on
the efi332.

    I'm happy to report that rtems-19990302 is running on the efi332
    board. I have enclosed a few minor patches below to the efi332 bsp. All
    patches are within that library but one. make/custom/efi332.cfg has a
    patch to select the right CPU_CFLAGS (at one time -m68332 was a
    problem... -mcpu32 or -m68332 work fine now).
1999-03-16 02:26:50 +00:00

74 lines
2.2 KiB
INI

#
# Config file for the efi332 BSP
#
# $Id$
#
include $(RTEMS_ROOT)/make/custom/default.cfg
RTEMS_CPU=m68k
RTEMS_CPU_MODEL=mcpu32
# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=efi332
# This contains the compiler options necessary to select the CPU model
# and (hopefully) optimize for it.
CPU_CFLAGS = -mcpu32
# optimize flag: typically -0, could use -O4 or -fast, -O4 is ok for RTEMS
CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
# This target does NOT support the TCP/IP stack so ignore requests
# to enable it.
HAS_NETWORKING=no
# Override default start file
START_BASE=start332
# This section makes the target dependent options file.
# NDEBUG (C library)
# if defined asserts do not generate code. This is commonly used
# as a command line option.
#
# RTEMS_TEST_NO_PAUSE (RTEMS tests)
# do not pause between screens of output in the rtems tests
#
# RTEMS_DEBUG (RTEMS)
# If defined, debug checks in RTEMS and support library code are enabled.
define make-target-options
@echo "/* #define NDEBUG 1 */ " >>$@
@echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
@echo "/* #define RTEMS_DEBUG 1 */" >>$@
endef
# The following are definitions of make-exe which will work using ld as
# is currently required. It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.
ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
$(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).nxe \
$(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
$(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
$(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
$(PACKHEX) > $(basename $@).exe
$(NM) -g -n $(basename $@).nxe > $(basename $@).num
$(SIZE) $(basename $@).nxe
endef
else
define make-exe
$(CC) $(CPPFLAGS) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).nxe \
$(LINK_OBJS) $(LINK_LIBS)
$(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
$(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
$(PACKHEX) > $(basename $@).exe
$(NM) -g -n $(basename $@).nxe > $(basename $@).num
$(SIZE) $(basename $@).nxe
endef
endif
# Miscellaneous additions go here