forked from Imagelibrary/rtems
106 lines
3.0 KiB
C
106 lines
3.0 KiB
C
/* timer.c
|
|
*
|
|
* NOTE: These routines will not work if the optimizer is enabled
|
|
* for some compilers. The multiple writes to the Z8036
|
|
* may be optimized away.
|
|
*
|
|
* It is important that the timer start/stop overhead be
|
|
* determined when porting or modifying this code.
|
|
*
|
|
* COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
|
|
* On-Line Applications Research Corporation (OAR).
|
|
* All rights assigned to U.S. Government, 1994.
|
|
*
|
|
* This material may be reproduced by or for the U.S. Government pursuant
|
|
* to the copyright license under the clause at DFARS 252.227-7013. This
|
|
* notice must appear in all copies of this file and its derivatives.
|
|
*
|
|
* $Id$
|
|
*/
|
|
|
|
|
|
#include <rtems.h>
|
|
#include <bsp.h>
|
|
|
|
int Ttimer_val;
|
|
rtems_boolean Timer_driver_Find_average_overhead;
|
|
|
|
rtems_isr timerisr();
|
|
|
|
void Timer_initialize()
|
|
{
|
|
rtems_unsigned8 data;
|
|
|
|
(void) set_vector( timerisr, TIMER_VECTOR, 0 ); /* install ISR */
|
|
|
|
Ttimer_val = 0; /* clear timer ISR count */
|
|
Z8x36_READ ( TIMER, MASTER_INTR, data );
|
|
Z8x36_WRITE( TIMER, MASTER_INTR, (data & 0x01) );
|
|
|
|
Z8x36_WRITE( TIMER, MASTER_CFG, 0xd4 );
|
|
Z8x36_READ ( TIMER, MASTER_INTR, data );
|
|
Z8x36_WRITE( TIMER, MASTER_INTR, (data & 0x7E) );
|
|
Z8x36_WRITE( TIMER, CT1_TIME_CONST_MSB, 0x00 );
|
|
Z8x36_WRITE( TIMER, CT1_TIME_CONST_LSB, 0x00 );
|
|
Z8x36_WRITE( TIMER, CT1_MODE_SPEC, 0x87 );
|
|
Z8x36_WRITE( TIMER, CNT_TMR_VECTOR, TIMER_VECTOR );
|
|
Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0x20 );
|
|
Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0x26 );
|
|
Z8x36_READ ( TIMER, MASTER_INTR, data );
|
|
Z8x36_WRITE( TIMER, MASTER_INTR, (data & 0xDA) | 0x80 );
|
|
|
|
Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0xC6 );
|
|
|
|
/*
|
|
* ACC_IC54 - interrupt 5 will be vectored and mapped to level 6
|
|
*/
|
|
|
|
data = (*(rtems_unsigned8 *)0x0D00000B);
|
|
(*(rtems_unsigned8 *)0x0D00000B) = (data & 0x0F) | 0x60;
|
|
|
|
}
|
|
|
|
#define AVG_OVERHEAD 9 /* It typically takes 3.65 microseconds */
|
|
/* (9 countdowns) to start/stop the timer. */
|
|
#define LEAST_VALID 10 /* Don't trust a value lower than this */
|
|
|
|
int Read_timer()
|
|
{
|
|
rtems_unsigned8 data;
|
|
rtems_unsigned8 msb, lsb;
|
|
rtems_unsigned32 remaining, total;
|
|
|
|
Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0xce ); /* read the counter value */
|
|
Z8x36_READ( TIMER, CT1_CUR_CNT_MSB, msb );
|
|
Z8x36_READ( TIMER, CT1_CUR_CNT_LSB, lsb );
|
|
|
|
remaining = 0x10000 - ((msb << 8) + lsb);
|
|
total = (Ttimer_val * 0x10000) + remaining;
|
|
|
|
Z8x36_READ ( TIMER, MASTER_INTR, data );
|
|
Z8x36_WRITE( TIMER, MASTER_INTR, (data & 0x01) );
|
|
|
|
/* do not restore old vector */
|
|
if ( Timer_driver_Find_average_overhead == 1 )
|
|
return total; /* in countdown units */
|
|
|
|
if ( total < LEAST_VALID )
|
|
return 0; /* below timer resolution */
|
|
|
|
/* Clocked at 2.4615 Mhz */
|
|
|
|
return (int)(((float)(total-AVG_OVERHEAD)) / 2.4615 * 2.0);
|
|
}
|
|
|
|
rtems_status_code Empty_function( void )
|
|
{
|
|
return RTEMS_SUCCESSFUL;
|
|
}
|
|
|
|
void Set_find_average_overhead(
|
|
rtems_boolean find_flag
|
|
)
|
|
{
|
|
Timer_driver_Find_average_overhead = find_flag;
|
|
}
|