forked from Imagelibrary/rtems
21bfd93aaf
Please find enclosed a patch which enables me to build the bare-bsp for
sh-rtems.
Changes:
1. Add preinstall to libbsp/bare/include/Makefile.in
2. Removed FORCEIT, add preinstall to
libbsp/sh/gensh1/include/Makefile.in
3. Disabled support of set_vector from sh code (shared/setvec.c is still
present but isn't used anymore), set_vector replaced with standard rtems
functions.
Problems still present:
1. Support of spin-delays in bare bsp
2. Proper support of cpu frequency
To configure I used:
<srcdir>/configure \
--target=sh-rtems \
--prefix=<instdir>/sh-bare \
--enable-bare-cpu-model=sh7032 \
--enable-bare-cpu-cflags='-Wall -m1 -DMHZ=20
-DCPU_CONSOLE_DEVNAME="\"/dev/null\""'
--enable-rtemsbsp=bare \
--disable-networking \
--disable-cxx \
--disable-posix \
--disable-tests
IMO, if there are no objections to this patch, a similar approach should
be applied to all CPUs/BSPs (esp. hppa1.1, mips64orion, ppc403, because
they apply set_vector inside of libcpu).
#
# $Id$
#
This is the top level of the RTEMS directory structure. The following
is a description of the files and directories in this directory:
Makefile.in
The top-level Make command file used to build the C implementation
of RTEMS. [RTEMS assumes the use of GNU make.]
README
This file.
REQUIRES
A list of the other tools which are assumed to be installed
before RTEMS is built.
SUPPORT
Information on third-party support for RTEMS.
build-tools
This directory contains the source for various utilities
needed to build RTEMS.
make
Make command files "included" from those in the source distribution.
[RTEMS assumes the use of GNU make.]
patches
This directory contains patches for this release of RTEMS.
src
This directory contains the source code for the C
implementation of RTEMS as well as the test suites, sample
applications, Board Support Packages, Device Drivers, and
support libraries.