forked from Imagelibrary/rtems
95aa5e134e
* configure.ac: Make letting boot_card() handle work area allocation mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
78 lines
2.8 KiB
Plaintext
78 lines
2.8 KiB
Plaintext
## Process this file with autoconf to produce a configure script.
|
|
##
|
|
## $Id$
|
|
|
|
AC_PREREQ(2.60)
|
|
AC_INIT([rtems-c-src-lib-libbsp-powerpc-mpc8260ads],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
|
|
AC_CONFIG_SRCDIR([bsp_specs])
|
|
RTEMS_TOP(../../../../../..)
|
|
|
|
RTEMS_CANONICAL_TARGET_CPU
|
|
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
|
|
RTEMS_BSP_CONFIGURE
|
|
|
|
RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
|
|
RTEMS_CANONICALIZE_TOOLS
|
|
RTEMS_PROG_CCAS
|
|
|
|
RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[*],[0])
|
|
RTEMS_BSPOPTS_HELP([DATA_CACHE_ENABLE],
|
|
[If defined, the data cache will be enabled after address translation
|
|
is turned on.])
|
|
|
|
RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[0])
|
|
RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
|
|
[If defined, the instruction cache will be enabled after address translation
|
|
is turned on.])
|
|
|
|
RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0])
|
|
RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
|
|
[Define to 1 if you want termios support for every port.
|
|
Termios support is independent of the choice of UART I/O mode.])
|
|
|
|
RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCC2_MINOR])
|
|
RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
|
|
[(BSP--console driver) Must be defined to be one of SMC1_MINOR,
|
|
SMC2_MINOR, SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR.
|
|
Determines which device will be registered as /dev/console.])
|
|
|
|
RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0])
|
|
RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
|
|
[(BSP--console driver)
|
|
Define to 0 or 1 if you want polled I/O performed by RTEMS.
|
|
Define to 1 if you want interrupt-driven performed by RTEMS.
|
|
Define to 2 if you want polled I/O performed by EPPCBug.
|
|
There is no provision to have a mix of interrupt-driven and polled I/O
|
|
ports, except that the printk port may use a different mode from the
|
|
other ports. If this is done, do not open the printk port from an RTEMS
|
|
application. With EPPCBug 1.1, if mode 2 is selected, CONSOLE_MINOR
|
|
must be set to SMC1_MINOR. This is a deficiency of the firmware: it
|
|
does not perform serial I/O on any port other than its default debug
|
|
port, which must be SMC1.])
|
|
|
|
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SMC2_MINOR])
|
|
RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
|
|
[(BSP--console driver)
|
|
Must be defined to be one of SMC1_MINOR, SMC2_MINOR, SCC2_MINOR,
|
|
SCC3_MINOR, or SCC4_MINOR. Determines which device is used for output
|
|
by printk(). If the port that printk() uses is also used for other
|
|
I/O (e.g. if PRINTK_MINOR == \$CONSOLE_MINOR), then both ports should
|
|
use the same type of I/O, otherwise the drivers will likely conflict with
|
|
each other.])
|
|
|
|
RTEMS_BSPOPTS_SET([DISPATCH_HANDLER_STAT],[*],[])
|
|
RTEMS_BSPOPTS_HELP([DISPATCH_HANDLER_STAT],
|
|
[used by irq/irq.c])
|
|
|
|
RTEMS_CHECK_NETWORKING
|
|
AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
|
|
|
|
BSP_BOOTCARD_OPTIONS
|
|
|
|
# Explicitly list a Makefile here
|
|
AC_CONFIG_FILES([Makefile])
|
|
|
|
RTEMS_PPC_EXCEPTIONS
|
|
|
|
AC_OUTPUT
|