forked from Imagelibrary/rtems
53 lines
1.7 KiB
Plaintext
53 lines
1.7 KiB
Plaintext
## Process this file with autoconf to produce a configure script.
|
|
##
|
|
## $Id$
|
|
|
|
AC_PREREQ(2.59)
|
|
AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
|
|
AC_CONFIG_SRCDIR([bsp_specs])
|
|
RTEMS_TOP(../../../../../..)
|
|
|
|
RTEMS_CANONICAL_TARGET_CPU
|
|
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
|
|
RTEMS_BSP_CONFIGURE
|
|
|
|
RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
|
|
RTEMS_CANONICALIZE_TOOLS
|
|
RTEMS_PROG_CCAS
|
|
|
|
RTEMS_CHECK_NETWORKING
|
|
AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
|
|
|
|
RTEMS_BSPOPTS_SET([WATCHDOG_TIMEOUT],[*],[0xFFFF])
|
|
RTEMS_BSPOPTS_HELP([WATCHDOG_TIMEOUT],
|
|
[Define to the desired timeout (in steps of 1/20 msec) to enable the
|
|
watchdog. Default is to disable the watchdog entirely.])
|
|
|
|
RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0])
|
|
RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
|
|
[Define to 1 if you want termios support for every port.
|
|
Termios support is independent of the choice of UART I/O mode.])
|
|
|
|
RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCI2_MINOR])
|
|
RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
|
|
[Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which
|
|
device will be registered as /dev/console.])
|
|
|
|
RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0])
|
|
RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
|
|
[Define to 1 if you want interrupt-driven I/O for the SCI ports.])
|
|
|
|
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SCI2_MINOR])
|
|
RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
|
|
[Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which
|
|
device is used for output by printk(). The printk port always uses polled
|
|
I/O. Don't open the printk port from RTEMS unless also using polled I/O
|
|
for the SCI ports.])
|
|
|
|
# Explicitly list a Makefile here
|
|
AC_CONFIG_FILES([Makefile])
|
|
|
|
RTEMS_PPC_EXCEPTIONS
|
|
|
|
AC_OUTPUT
|