forked from Imagelibrary/rtems
58507208eb
* bootloader/Makefile.am, console/Makefile.am, pci/Makefile.am: Per PR216, "libbsp/powerpc/shared" BSP has been modified considerably with the goal to make it more flexible and reusable by other BSPs. The main strategies were: - eliminate hardcoded base addresses; devices use offsets and a BSP defined base address. - separate functionality into different files (e.g. reboot from inch.c to reboot.c) which can be overridden by a 'derived' BSP. - separate initialization code into separate files (e.g. PCI bridge detection/initialization was separated from the more generic PCI access routines), also to make it easier for 'derived' BSPs to substitute their own initialization code. There are also a couple of enhancements and fixes: - IRQ handling code now has a hook for attaching a VME bridge. - OpenPIC is now explicitely initialized (polarities, senses). Eliminated the implicit assumption on the presence of an ISA PIC. - UART and console driver now supports more than 1 port. The current maximum of 2 can easily be extended by enlarging a table (it would even be easier if the ISR API was not broken by design). - fixed polled_io.c so it correctly supports console on COM2 - fixed TLB invalidation code (start.S). - exception handler prints a stack backtrace. - added BSP_pciFindDevice() to scan the pci bus for a particular vendor/device/instance.
#
# $Id$
#
This is the top level of the RTEMS directory structure. The following
is a description of the files and directories in this directory:
Makefile.in
The top-level Make command file used to build the C implementation
of RTEMS. [RTEMS assumes the use of GNU make.]
README
This file.
REQUIRES
A list of the other tools which are assumed to be installed
before RTEMS is built.
SUPPORT
Information on third-party support for RTEMS.
build-tools
This directory contains the source for various utilities
needed to build RTEMS.
make
Make command files "included" from those in the source distribution.
[RTEMS assumes the use of GNU make.]
patches
This directory contains patches for this release of RTEMS.
src
This directory contains the source code for the C
implementation of RTEMS as well as the test suites, sample
applications, Board Support Packages, Device Drivers, and
support libraries.