Files
rtems/bsps/arm/atsam/contrib/libraries/libboard/include/mcan_config.h
Sebastian Huber 54aabb70eb bsp/atsam: Move libraries to bsps
This patch is a part of the BSP source reorganization.

Update #3285.
2018-04-23 15:18:42 +02:00

127 lines
6.4 KiB
C

/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) 2015, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
/**
* \file
*
* \section Purpose
*
* Interface for configuring and using Timer Counter (TC) peripherals.
*
* \section Usage
* -# Optionally, use TC_FindMckDivisor() to let the program find the best
* TCCLKS field value automatically.
* -# Configure a Timer Counter in the desired mode using TC_Configure().
* -# Start or stop the timer clock using TC_Start() and TC_Stop().
*/
#ifndef _MCAN_CONFIG_
#define _MCAN_CONFIG_
/*------------------------------------------------------------------------------
* Headers
*------------------------------------------------------------------------------*/
/*------------------------------------------------------------------------------
* Global functions
*------------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif
/* Programmable Clock Source for Baud Rate is Common To Both MCAN Controllers */
#define MCAN_PROG_CLK_PRESCALER 1 /* /1 to /256 */
// select one of the following for the programmable clock source
//#define MCAN_PROG_CLK_SELECT PMC_PCK_CSS_SLOW_CLK
//#define MCAN_PROG_CLK_SELECT PMC_PCK_CSS_MAIN_CLK
//#define MCAN_PROG_CLK_SELECT PMC_PCK_CSS_PLLA_CLK
//#define MCAN_PROG_CLK_SELECT PMC_PCK_CSS_UPLL_CLK
#define MCAN_PROG_CLK_SELECT PMC_PCK_CSS_MCK
#define MCAN_PROG_CLK_FREQ_HZ \
((float) 150000000 / (float) MCAN_PROG_CLK_PRESCALER)
#define MCAN0_BIT_RATE_BPS 500000
#define MCAN0_PROP_SEG 2
#define MCAN0_PHASE_SEG1 11
#define MCAN0_PHASE_SEG2 11
#define MCAN0_SYNC_JUMP 4
#define MCAN0_FAST_BIT_RATE_BPS 2000000
#define MCAN0_FAST_PROP_SEG 2
#define MCAN0_FAST_PHASE_SEG1 4
#define MCAN0_FAST_PHASE_SEG2 4
#define MCAN0_FAST_SYNC_JUMP 2
#define MCAN0_NMBR_STD_FLTS 8 /* 128 max filters */
#define MCAN0_NMBR_EXT_FLTS 8 /* 64 max filters */
#define MCAN0_NMBR_RX_FIFO0_ELMTS 0 /* # of elements, 64 elements max */
#define MCAN0_NMBR_RX_FIFO1_ELMTS 0 /* # of elements, 64 elements max */
#define MCAN0_NMBR_RX_DED_BUF_ELMTS 16 /* # of elements, 64 elements max */
#define MCAN0_NMBR_TX_EVT_FIFO_ELMTS 0 /* # of elements, 32 elements max */
#define MCAN0_NMBR_TX_DED_BUF_ELMTS 4 /* # of elements, 32 elements max */
#define MCAN0_NMBR_TX_FIFO_Q_ELMTS 0 /* # of elements, 32 elements max */
#define MCAN0_RX_FIFO0_ELMT_SZ 8 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#define MCAN0_RX_FIFO1_ELMT_SZ 8 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#define MCAN0_RX_BUF_ELMT_SZ 8 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#define MCAN0_TX_BUF_ELMT_SZ 8 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#define MCAN1_BIT_RATE_BPS 500000
#define MCAN1_PROP_SEG 2
#define MCAN1_PHASE_SEG1 11
#define MCAN1_PHASE_SEG2 11
#define MCAN1_SYNC_JUMP 4
#define MCAN1_FAST_BIT_RATE_BPS 2000000
#define MCAN1_FAST_PROP_SEG 2
#define MCAN1_FAST_PHASE_SEG1 4
#define MCAN1_FAST_PHASE_SEG2 4
#define MCAN1_FAST_SYNC_JUMP 2
#define MCAN1_NMBR_STD_FLTS 8 /* 128 max filters */
#define MCAN1_NMBR_EXT_FLTS 8 /* 64 max filters */
#define MCAN1_NMBR_RX_FIFO0_ELMTS 12 /* # of elements, 64 elements max */
#define MCAN1_NMBR_RX_FIFO1_ELMTS 0 /* # of elements, 64 elements max */
#define MCAN1_NMBR_RX_DED_BUF_ELMTS 4 /* # of elements, 64 elements max */
#define MCAN1_NMBR_TX_EVT_FIFO_ELMTS 0 /* # of elements, 32 elements max */
#define MCAN1_NMBR_TX_DED_BUF_ELMTS 4 /* # of elements, 32 elements max */
#define MCAN1_NMBR_TX_FIFO_Q_ELMTS 4 /* # of elements, 32 elements max */
#define MCAN1_RX_FIFO0_ELMT_SZ 8 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#define MCAN1_RX_FIFO1_ELMT_SZ 8 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#define MCAN1_RX_BUF_ELMT_SZ 64 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#define MCAN1_TX_BUF_ELMT_SZ 32 /* 8, 12, 16, 20, 24, 32, 48, 64 bytes */
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _MCAN_CONFIG_ */