forked from Imagelibrary/rtems
f817b0283c
particular, using bsp.h, or getting information from the BSP which should properly be obtained from RTEMS is forbidden. This is necessary to strengthen the division between the BSP independent parts of RTEMS and the BSPs themselves. This started after comments and analysis by Ralf Corsepius <corsepiu@faw.uni-ulm.de>. The changes primarily eliminated the need to include bsp.h and peeking at BSP_Configuration. The use of Cpu_table in each BSP needs to be eliminated.
#
# COPYRIGHT (c) 1989-1998.
# On-Line Applications Research Corporation (OAR).
# Copyright assigned to U.S. Government, 1994.
#
# The license and distribution terms for this file may be
# found in the file LICENSE in this distribution or at
# http://www.OARcorp.com/rtems/license.html.
#
# $Id$
#
This directory contains the RTEMS Sample Application Suite.
The tests in this directory perform two functions:
+ provide simple examples of applications which can be
used as a starting point for your application.
+ help test a new board support package
The hello and ticker applications are useful when first bringing up
a new board support package. The base_mp test is useful when
performing initial checkout on a new MPCI layer.
The following describes each of the sample applications:
base_mp
This is a very simple two node multiprocessor application. It consists
of a single initialization task on each node which print out
their respective node numbers and task IDs. This test can be
used as a simple test of a new MPCI layer because it minimizes
the number of packets sent by RTEMS.
This is intended as a starting point for custom developed multiprocessor
applications.
base_sp
This is a simple single processor application which consists of
an initialization task which creates another task.
This is intended as a starting point for custom developed single
processor applications.
cdtest
A very simple C++ application which demonstrates that it is
possible to use C++ contructors and destructors in an RTEMS
application. Also does a perfunctory iostream test.
hello
This is the RTEMS version of the classic hello world program.
It consists of single initialization task which prints out
a few messages.
This test does not include a Clock Tick device driver and can
be used to test the startup code of the board support package
as well as console output.
paranoia
A public domain test of the floating point and math library
capabilities of a toolset. It reports discrepancies between
actual and expected results. It is a large test.
ticker
This is a simple test of the user's Clock Tick device driver.
This test has an initialization task create three application
tasks which sleep and periodically wake up and print the time.