RTOS/rtems
1
0
Fork 0
forked from Imagelibrary/rtems
Code Pull Requests Activity
Files
2a0923c5280c7d25abc89103651b0465aea6569c
rtems/cpukit/libi2c/libi2c.h
Sebastian Huber a0b1b5edb8 Delete CONFIGURE_USE_IMFS_AS_BASE_FILESYSTEM 
This define was superfluous, undocumented and used inconsistently.
2014-12-16 11:34:38 +01:00

509 lines
17 KiB
C
Raw Blame History

/**
* @file
*
* @ingroup libi2c
*
* @brief I2C Library
*/
#ifndef _RTEMS_LIBI2C_H
#define _RTEMS_LIBI2C_H
/*
* Authorship
* ----------
* This software was created by
* Till Straumann <strauman@slac.stanford.edu>, 2005,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* This software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
#include <rtems.h>
#include <rtems/io.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup libi2c I2C Library
*
* @brief I2C library.
*
*/
/**@{**/
/* Simple I2C driver API */
/* Initialize the libary - may fail if no semaphore or no driver slot is available */
extern int rtems_libi2c_initialize (void);
/* Alternatively to rtems_libi2c_initialize() the library can also be
* initialized by means of a traditional driver table entry containing
* the following entry points:
*/
extern rtems_status_code
rtems_i2c_init (
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg);
extern rtems_status_code
rtems_i2c_open (
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg);
extern rtems_status_code
rtems_i2c_close (
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg);
extern rtems_status_code
rtems_i2c_read (
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg);
extern rtems_status_code
rtems_i2c_write (
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg);
extern rtems_status_code
rtems_i2c_ioctl (
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg);
extern const rtems_driver_address_table rtems_libi2c_io_ops;
/* Unfortunately, if you want to add this driver to
* a RTEMS configuration table then you need all the
* members explicitly :-( (Device_driver_table should
* hold pointers to rtems_driver_address_tables rather
* than full structs).
*
* The difficulty is that adding this driver to the
* configuration table is not enough; you still need
* to populate the framework with low-level bus-driver(s)
* and high-level drivers and/or device-files...
*
* Currently the preferred way is having the BSP
* call 'rtems_libi2c_initialize' followed by
* 'rtems_libi2c_register_bus' and
* 'rtems_libi2c_register_drv' and/or
* 'mknod' (for 'raw' device nodes)
* from the 'pretasking_hook'.
*/
#define RTEMS_LIBI2C_DRIVER_TABLE_ENTRY \
{ \
initialization_entry: rtems_i2c_init, \
open_entry: rtems_i2c_open, \
close_entry: rtems_i2c_close, \
read_entry: rtems_i2c_read, \
write_entry: rtems_i2c_write, \
control_entry: rtems_i2c_ioctl, \
}
/* Bus Driver API
*
* Bus drivers provide access to low-level i2c functions
* such as 'send start', 'send address', 'get bytes' etc.
*/
/* first field must be a pointer to ops; driver
* may add its own fields after this.
* the struct that is registered with the library
* is not copied; a pointer will we passed
* to the callback functions (ops).
*/
typedef struct rtems_libi2c_bus_t_
{
const struct rtems_libi2c_bus_ops_ *ops;
int size; /* size of whole structure */
} rtems_libi2c_bus_t;
/* Access functions a low level driver must provide;
*
* All of these, except read_bytes and write_bytes
* return RTEMS_SUCCESSFUL on success and an error status
* otherwise. The read and write ops return the number
* of chars read/written or -(status code) on error.
*/
typedef struct rtems_libi2c_bus_ops_
{
/* Initialize the bus; might be called again to reset the bus driver */
rtems_status_code (*init) (rtems_libi2c_bus_t * bushdl);
/* Send start condition */
rtems_status_code (*send_start) (rtems_libi2c_bus_t * bushdl);
/* Send stop condition */
rtems_status_code (*send_stop) (rtems_libi2c_bus_t * bushdl);
/* initiate transfer from (rw!=0) or to a device */
rtems_status_code (*send_addr) (rtems_libi2c_bus_t * bushdl,
uint32_t addr, int rw);
/* read a number of bytes */
int (*read_bytes) (rtems_libi2c_bus_t * bushdl, unsigned char *bytes,
int nbytes);
/* write a number of bytes */
int (*write_bytes) (rtems_libi2c_bus_t * bushdl, unsigned char *bytes,
int nbytes);
/* ioctl misc functions */
int (*ioctl) (rtems_libi2c_bus_t * bushdl,
int cmd,
void *buffer
);
} rtems_libi2c_bus_ops_t;
/*
* Register a lowlevel driver
*
* TODO: better description
*
* This allocates a major number identifying *this* driver
* (i.e., libi2c) and the minor number encodes a bus# and a i2c address.
*
* The name will be registered in the filesystem (parent
* directories must exist, also IMFS filesystem must exist). It may be NULL in
* which case the library will pick a default.
*
* RETURNS: bus # (>=0) or -1 on error (errno set).
*/
extern int rtems_libi2c_register_bus (const char *name, rtems_libi2c_bus_t * bus);
extern rtems_device_major_number rtems_libi2c_major;
#define RTEMS_LIBI2C_MAKE_MINOR(busno, i2caddr) \
((((busno)&((1<<3)-1))<<10) | ((i2caddr)&((1<<10)-1)))
/* After the library is initialized, a major number is available.
* As soon as a low-level bus driver is registered (above routine
* returns a 'busno'), a device node can be created in the filesystem
* with a major/minor number pair of
*
* rtems_libi2c_major / RTEMS_LIBI2C_MAKE_MINOR(busno, i2caddr)
*
* and a 'raw' hi-level driver is then attached to this device
* node.
* This 'raw' driver has very simple semantics:
*
* 'open' sends a start condition
* 'read'/'write' address the device identified by the i2c bus# and address
* encoded in the minor number and read or write, respectively
* a stream of bytes from or to the device. Every time the
* direction is changed, a 're-start' condition followed by
* an 'address' cycle is generated on the i2c bus.
* 'close' sends a stop condition.
*
* Hence, using the 'raw' driver, e.g., 100 bytes at offset 0x200 can be
* read from an EEPROM by the following pseudo-code:
*
* mknod("/dev/i2c-54", mode, MKDEV(rtems_libi2c_major, RTEMS_LIBI2C_MAKE_MINOR(0,0x54)))
*
* int fd;
* char off[2]={0x02,0x00};
*
* fd = open("/dev/i2c-54",O_RDWR);
* write(fd,off,2);
* read(fd,buf,100);
* close(fd);
*
*/
/* Higher Level Driver API
*
* Higher level drivers know how to deal with specific i2c
* devices (independent of the bus interface chip) and provide
* an abstraction, i.e., the usual read/write/ioctl access.
*
* Using the above example, such a high level driver could
* prevent the user from issuing potentially destructive write
* operations (the aforementioned EEPROM interprets any 3rd
* and following byte written to the device as data, i.e., the
* contents could easily be changed!).
* The correct 'read-pointer offset' programming could be
* implemented in 'open' and 'ioctl' of a high-level driver and
* the user would then only have to perform harmless read
* operations, e.g.,
*
* fd = open("/dev/i2c.eeprom",O_RDONLY) / * opens and sets EEPROM read pointer * /
* ioctl(fd, IOCTL_SEEK, 0x200) / * repositions the read pointer * /
* read(fd, buf, 100)
* close(fd)
*
*/
/* struct provided at driver registration. The driver may store
* private data behind the mandatory first fields but the size
* must be set to the size of the entire struct, e.g.,
*
* struct driver_pvt {
* rtems_libi2c_drv_t pub;
* struct { ... } pvt;
* } my_driver = {
* { ops: my_ops,
* size: sizeof(my_driver)
* },
* { ...};
* };
*
* A pointer to this struct is passed to the callback ops.
*/
typedef struct rtems_libi2c_drv_t_
{
const rtems_driver_address_table *ops; /* the driver ops */
int size; /* size of whole structure (including appended private data) */
} rtems_libi2c_drv_t;
/*
* The high level driver must be registered with a particular
* bus number and i2c address.
*
* The registration procedure also creates a filesystem node,
* i.e., the returned minor number is not really needed.
*
* If the 'name' argument is NULL, no filesystem node is
* created (but this can be done 'manually' using rtems_libi2c_major
* and the return value of this routine).
*
* RETURNS minor number (FYI) or -1 on failure
*/
extern int
rtems_libi2c_register_drv (const char *name, rtems_libi2c_drv_t * drvtbl,
unsigned bus, unsigned i2caddr);
/* Operations available to high level drivers */
/* NOTES: The bus a device is attached to is LOCKED from the first send_start
* until send_stop is executed!
*
* Bus tenure MUST NOT span multiple system calls - otherwise, a single
* thread could get into the protected sections (or would deadlock if the
* mutex was not nestable).
* E.g., consider what happens if 'open' sends a 'start' and 'close'
* sends a 'stop' (i.e., the bus mutex would be locked in 'open' and
* released in 'close'. A single thread could try to open two devices
* on the same bus and would either deadlock or nest into the bus mutex
* and potentially mess up the i2c messages.
*
* The correct way is to *always* relinquish the i2c bus (i.e., send 'stop'
* from any driver routine prior to returning control to the caller.
* Consult the implementation of the generic driver routines (open, close, ...)
* below or the examples in i2c-2b-eeprom.c and i2c-2b-ds1621.c
*
* Drivers just pass the minor number on to these routines...
*/
extern rtems_status_code rtems_libi2c_send_start (rtems_device_minor_number minor);
extern rtems_status_code rtems_libi2c_send_stop (rtems_device_minor_number minor);
extern rtems_status_code
rtems_libi2c_send_addr (rtems_device_minor_number minor, int rw);
/* the read/write routines return the number of bytes transferred
* or -(status_code) on error.
*/
extern int
rtems_libi2c_read_bytes (rtems_device_minor_number minor,
unsigned char *bytes, int nbytes);
extern int
rtems_libi2c_write_bytes (rtems_device_minor_number minor,
const unsigned char *bytes, int nbytes);
/* Send start, send address and read bytes */
extern int
rtems_libi2c_start_read_bytes (rtems_device_minor_number minor,
unsigned char *bytes,
int nbytes);
/* Send start, send address and write bytes */
extern int
rtems_libi2c_start_write_bytes (rtems_device_minor_number minor,
const unsigned char *bytes,
int nbytes);
/* call misc iocontrol function */
extern int
rtems_libi2c_ioctl (rtems_device_minor_number minor,
int cmd,
...);
/*
* NOTE: any low-level driver ioctl returning a negative
* result for release the bus (perform a STOP condition)
*/
/*******************************
* defined IOCTLs:
*******************************/
#define RTEMS_LIBI2C_IOCTL_READ_WRITE 1
/*
* retval = rtems_libi2c_ioctl(rtems_device_minor_number minor,
* RTEMS_LIBI2C_IOCTL_READ_WRITE,
* rtems_libi2c_read_write_t *arg);
*
* This call performs a simultanous read/write transfer,
* which is possible (and sometimes needed) for SPI devices
*
* arg is a pointer to a rd_wr info data structure
*
* This call is only needed for SPI devices
*/
#define RTEMS_LIBI2C_IOCTL_START_TFM_READ_WRITE 2
/*
* retval = rtems_libi2c_ioctl(rtems_device_minor_number minor,
* RTEMS_LIBI2C_IOCTL_START_READ_WRITE,
* unsigned char *rd_buffer,
* const unsigned char *wr_buffer,
* int byte_cnt,
* const rtems_libi2c_tfr_mode_t *tfr_mode_ptr);
*
* This call addresses a slave and then:
* - sets the proper transfer mode,
* - performs a simultanous read/write transfer,
* (which is possible and sometimes needed for SPI devices)
* NOTE: - if rd_buffer is NULL, receive data will be dropped
* - if wr_buffer is NULL, bytes with content 0 will transmitted
*
* rd_buffer is a pointer to a receive buffer (or NULL)
* wr_buffer is a pointer to the data to be sent (or NULL)
*
* This call is only needed for SPI devices
*/
#define RTEMS_LIBI2C_IOCTL_SET_TFRMODE 3
/*
* retval = rtems_libi2c_ioctl(rtems_device_minor_number minor,
* RTEMS_LIBI2C_IOCTL_SET_TFRMODE,
* const rtems_libi2c_tfr_mode_t *tfr_mode_ptr);
*
* This call sets an SPI device to the transfer mode needed (baudrate etc.)
*
* tfr_mode is a pointer to a structure defining the SPI transfer mode needed
* (see below).
*
* This call is only needed for SPI devices
*/
#define RTEMS_LIBI2C_IOCTL_GET_DRV_T 4
/*
* retval = rtems_libi2c_ioctl(rtems_device_minor_number minor,
* RTEMS_LIBI2C_IOCTL_GET_DRV_T,
* const rtems_libi2c_drv_t *drv_t_ptr);
*
* This call allows the a high-level driver to query its driver table entry,
* including its private data appended to it during creation of the entry
*
*/
/**
* @brief IO control command for asynchronous read and write.
*
* @see rtems_libi2c_read_write_done_t and rtems_libi2c_read_write_async_t.
*
* @warning This is work in progress!
*/
#define RTEMS_LIBI2C_IOCTL_READ_WRITE_ASYNC 5
/*
* argument data structures for IOCTLs defined above
*/
typedef struct {
unsigned char *rd_buf;
const unsigned char *wr_buf;
int byte_cnt;
} rtems_libi2c_read_write_t;
typedef struct {
uint32_t baudrate; /* maximum bits per second */
/* only valid for SPI drivers: */
uint8_t bits_per_char; /* how many bits per byte/word/longword? */
bool lsb_first; /* true: send LSB first */
bool clock_inv; /* true: inverted clock (high active) */
bool clock_phs; /* true: clock starts toggling at start of data tfr */
uint32_t idle_char; /* This character will be continuously transmitted in read only functions */
} rtems_libi2c_tfr_mode_t;
typedef struct {
rtems_libi2c_tfr_mode_t tfr_mode;
rtems_libi2c_read_write_t rd_wr;
} rtems_libi2c_tfm_read_write_t;
/**
* @brief Notification function type for asynchronous read and write.
*
* @see RTEMS_LIBI2C_IOCTL_READ_WRITE_ASYNC and
* rtems_libi2c_read_write_async_t.
*
* @warning This is work in progress!
*/
typedef void (*rtems_libi2c_read_write_done_t) \
( int /* return value */, int /* nbytes */, void * /* arg */);
/**
* @brief IO command data for asynchronous read and write.
*
* @see RTEMS_LIBI2C_IOCTL_READ_WRITE_ASYNC and
* rtems_libi2c_read_write_done_t.
*
* @warning This is work in progress!
*/
typedef struct {
unsigned char *rd_buf;
const unsigned char *wr_buf;
int byte_cnt;
rtems_libi2c_read_write_done_t done;
void *arg;
} rtems_libi2c_read_write_async_t;
/** @} */
#ifdef __cplusplus
}
#endif
#endif
View Git Blame Copy Permalink