forked from Imagelibrary/rtems
98100d275f
made no attempt to divide the comments up and place them with just
the appropriate files. Here is an excerpt from Ralf's email:
Changes including comments on changes I made after cycling through
all the targets:
* Added ranlib support. Now all targets use "ranlib" instead of "ar -s"
to build an index for a library. If ranlib isn't detected during
configuration, check if ar -s is working and try "ar -s" instead of
* Removed $(XXX_FOR_TARGET) from make/target.cfg.in, use $(XXX) instead now.
* gcc-target-default.cfg: LINK_XXXX-defines reworked to solve the -l
problem under posix (cf gcc-target-default.cfg)
* rtems-glom replaced by Makefile-rules inside of the wrapup/Makefile.in
that has been using rtems-glom until now.
* Removed CCC and friends in gcc-target-default.cfg, as they have been
breaking CXX support.
* Removed CONFIG.$(TARGET_ARCH).CC lines from several custom/*.cfg
files, because this is now set in custom/default.cfg.
* Added aclocal/ar-s.m4, check whether "ar -s" is working
* Added aclocal/cygwin.m4 and aclocal/exeext.m4.
* Reworked aclocal/canonicalize-tools.m4: Added ar -s check; fixes for
problems when XXX_FOR_TARGET is given via environment variables (didn't
work for gcc until now), adding cygwin check, improved autoconf-cache
handling.
* Removed -l from make rule dependencies. LINK_LIBS is now allowed to
contain -L and -l. LINK_OBJS and LINK_FILES must not contain -L or -l.
gcc28 make-exe rules now link using $(LINK_OBJS) $(LINK_LIBS) => Almost
all custom/*.cfg are modified. This is very likely to break something
because of typos or having missed to edit a file.
Open problems, known bugs, things I didn't do:
* custom/p4000.cfg seems to be out of date and requires to be reviewed.
(JRS NOTE: It is subordinate p4650 and p4600 -- both of which build ok
after minor changes.)
* custom/psim.cfg needs to be reviewed, I added some changes to it, I am
insecure about.
(JRS NOTE: psim had a minor problem endif/endef swapped but runs fine.)
* rtems-glom.in can now be removed.
* gcc*.cfg files "make depend" rules don't honor language specific flags
(e.g CXXFLAGS is ignored for *.cc) - Nothing to worry about now, but may
cause problems for hosts/targets not using gcc or rtems-add-ons that use
external packages.
* AFAIS, the no_bsp BSP can't be build anymore, i.e. configure refused
to configure for it whatever I tried.
* The toplevel and toplevel+1 README files are quite out-dated
* cygwin.m4 isn't of much use for rtems. In most cases (cf.
aclocal/*.m4) it is worked around by directly using $host_os. I think
I'll remove it soon after the next snapshot
* Before release the cygwin patch needs to be tested under cygwin. I may
have broken/missed something (esp. the sed-pattern to convert \\ into /
may be broken).
* You should try to build/run the posix-BSP under solaris - I don't
expect problems, but I am not 100% sure, esp. with regard to ranlib/ar -s.
* You should consider to convert all make/compilers/*.cfg files into
make/compilers/*.cfg.in files and let autoconf generate the *.cfg. This
may help getting rid of some if/then/else statements and help
hard-coding some defines into those files in future and shouldn't
disturb now.
* Not having installed libc.a/libm.a on a host may still break building
rtems, esp. when using -disable-gcc28 as the gcc27-configuration scheme
directly accesses libc.a and libm.a. The problem should not appear when
using gcc28 because it references libc/libm only through -lc and -lm
which may be static or dynamic (I didn't test this).
* shgen is not yet included (I didn't yet have enough time to integrate it).
* I know about a few more configure-probs (esp. cross-checking
--enable-* flags).
+ warn/refuse to configure when --enable-libcdir and
--enable-gcc28 are given.
+ force --enable-libcdir when --disable-gcc28 is given
* Replaced KSHELL with @KSH@ in some shell scripts generated by configure.in.
* Added a dependency to aclocal/*.m4 in the toplevel Makefile => configure
and aclocal.m4 will now be rebuild when any aclocal/*.m4 file is changed
* Some changes to aclocal/gcc-pipe.m4 and aclocal/gcc-specs.m4
* Replaced i[[3456]]86-unknown-freebsd2.[[12]] with i[[3456]]86-*freebsd2.*
in configure.in, as I suppose there might exist a variety of valid vendors
(2nd field of the name-tripple)
* Disabled override MAKEFLAGS in toplevel Makefile.in - Potential
side-effects are not really clear to me.
* In mvme162.cfg, $(LINK_LIBS) is missing in the CC line in gcc28's make-exe
rule (yet another one I missed to edit). Just append $(LINK_LIBS) to
the "CC" line, like I hopefully did to ALL other custom/*.cfg files.
* the problem with mvme162lx.cfg is a follow-up problem of the
mvme162.cfg-bug.
* mvme162/console and idp/console had variables named Buffer which
conflicted with similarly named variables in some tests.
297 lines
8.0 KiB
INI
297 lines
8.0 KiB
INI
#
|
|
# gcc-no_bsp.cfg,v 1.13 1995/12/19 19:59:57 joel Exp
|
|
#
|
|
# This is for the amd29k portsw board.
|
|
#
|
|
# THIS IS NOT A GNU TOOLS BASED PORT!!!
|
|
#
|
|
|
|
# Prefix on the installed GNU tools
|
|
# Just use the native tools
|
|
GNU_TOOLS_PREFIX=
|
|
|
|
# Additional target names (other than debug, profile)
|
|
TARGET_VARIANTS +=
|
|
|
|
#
|
|
# Pre-processor defines.
|
|
# Local tailoring (on the command line) can be done by setting XCPPFLAGS
|
|
# which is never set in the Makefile's
|
|
#
|
|
# Possible defines include:
|
|
# -DRTEMS_LIBC using libc bundled with RTEMS
|
|
# -DRTEMS_NEWLIB using CYGNUS libc
|
|
# -DMALLOC_PROVIDED must be used for newlib reent struct
|
|
|
|
DEFINES:= $(LIBC_DEFINES)
|
|
|
|
GCC_INCLUDE=.
|
|
|
|
# Note: normally we do not want the standard include files
|
|
# Also we usually include a "libc_include" directory
|
|
CPPFLAGS=$(XCPPFLAGS) $(DEFINES) \
|
|
-I$(RTEMS_LIBC_DIR)/include \
|
|
-I$(PROJECT_INCLUDE) \
|
|
-I/opt/29k/src/inc
|
|
|
|
#
|
|
# Local tailoring (on the command line) can be done by setting XCFLAGS
|
|
# which is never set in the Makefile's
|
|
#
|
|
|
|
#
|
|
# CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V, CFLAGS_PROFILE_V are the values we
|
|
# would want the corresponding macros to be set to.
|
|
#
|
|
# CFLAGS_OPTIMIZE, CFLAGS_DEBUG, CFLAGS_PROFILE are set in the leaf
|
|
# Makefiles by the 'debug:' and 'profile:' targets to their _V values.
|
|
#
|
|
|
|
# default flags
|
|
|
|
CFLAGS_DEFAULT = -NB -bwc -nocrt0 -Ml -m -g -Hansi -Hon=Pointers_compatible -Hon=Pointers_compatible_with_ints -Dinline= -D___AM29K__ -Hnocopyr
|
|
|
|
# optimize flag: typically -0, could use -O4 or -fast
|
|
# -O4 is ok for RTEMS
|
|
# -Os to optimize for size
|
|
CFLAGS_OPTIMIZE_V=-Os
|
|
|
|
# debug flag; typically -g
|
|
CFLAGS_DEBUG_V=-g -O0 -DRTEMS_DEBUG -DSTACK_CHECKER_ON
|
|
|
|
# when debugging, optimize flag: typically empty
|
|
# some compilers do allow optimization with their "-g"
|
|
CFLAGS_DEBUG_OPTIMIZE_V=
|
|
|
|
# profile flag; use gprof(1)
|
|
CFLAGS_PROFILE_V=
|
|
|
|
# default is to optimize
|
|
CFLAGS_OPTIMIZE=$(CFLAGS_OPTIMIZE_V)
|
|
|
|
# dynamic libraries
|
|
CFLAGS_DYNAMIC_V=-fpic
|
|
ASFLAGS_DYNAMIC_V=
|
|
|
|
CFLAGS=$(CFLAGS_DEFAULT) $(CFLAGS_OPTIMIZE) $(CFLAGS_DEBUG) $(CFLAGS_PROFILE)
|
|
|
|
# List of library paths without -L
|
|
LD_PATHS= $(PROJECT_RELEASE)/lib
|
|
|
|
# libraries you want EVERYONE to link with
|
|
LD_LIBS=
|
|
|
|
# ld flag to ensure pure-text
|
|
LDFLAGS_MUST_BE_PURE_V =
|
|
|
|
# ld flag for [un]shared objects
|
|
LDFLAGS_STATIC_LIBRARIES_V =
|
|
LDFLAGS_SHARED_LIBRARIES_V =
|
|
|
|
# ld flag for incomplete link
|
|
LDFLAGS_INCOMPLETE = -i
|
|
|
|
# Special linker options when building lib.so
|
|
LDFLAGS_DYNAMIC_V = ??
|
|
|
|
# Some dynamic linking systems want the preferred name recorded in the binary
|
|
# ref: src/libxil/Makefile
|
|
LDFLAGS_DYNAMIC_LIBNAME_V = -h $(DYNAMIC_VERSION_LIBNAME)
|
|
|
|
# ld flags for profiling, debugging
|
|
LDFLAGS_PROFILE_V =
|
|
LDFLAGS_DEBUG_V =
|
|
|
|
LDFLAGS=$(LDFLAGS_PROFILE) $(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %)
|
|
|
|
#
|
|
# Stuff to clean and clobber for the compiler and its tools
|
|
#
|
|
|
|
CLEAN_CC = a.out *.o *.BAK
|
|
CLOBBER_CC =
|
|
|
|
#
|
|
# Client compiler and support tools
|
|
#
|
|
|
|
CC=/opt/29k/bin/hc29
|
|
CXX=$(CC)
|
|
CCC=$(CXX)
|
|
|
|
# CPP command to write file to standard output
|
|
CPP=$(CC) -E
|
|
|
|
# flags set by cc when running cpp
|
|
CPP_CC_FLAGS=-D__STDC__
|
|
|
|
AS=/opt/29k/bin/as29
|
|
ASPP=ERROR_NO_ASPP
|
|
|
|
ASFLAGS=-l -fcgimosx
|
|
ASM4FLAGS := -I $(PROJECT_INCLUDE)
|
|
|
|
|
|
# NOTE: should never use full path .. but there is no guarantee ld, etc
|
|
# will be in the same directory as gcc.. so hope they are in the path
|
|
# Don't do this on a real target!!!
|
|
LD=/opt/29k/bin/ld29
|
|
NM=/opt/29k/bin/nm29
|
|
AR=echo making library
|
|
# egrep regexp to ignore symbol table entries in ar archives.
|
|
# Only used to make sure we skip them when coalescing libraries.
|
|
# skip __.SYMDEF and empty names (maybe bug in ranlib??).
|
|
AR_SYMBOL_TABLE="HIGHLY-UNLIKELY-TO-CONFLICT"
|
|
ARFLAGS=ruv
|
|
|
|
# NOTE: see comment on ld, nm, ar
|
|
SIZE=size
|
|
|
|
#
|
|
# Command to convert a normal archive to one searchable by $(LD)
|
|
# Not needed on SVR4
|
|
#
|
|
|
|
MKLIB=/opt/29k/bin/lib29
|
|
|
|
#
|
|
# How to compile stuff into ${ARCH} subdirectory
|
|
#
|
|
# NOTE: we override COMPILE.c
|
|
#
|
|
|
|
COMPILE.c=$(CC) -c $(CFLAGS) $(CPPFLAGS) $(XCFLAGS)
|
|
|
|
${ARCH}/%.o: %.c
|
|
${COMPILE.c} -o $@ $<
|
|
$(CHMOD) -f g+w $@
|
|
|
|
${ARCH}/%.o: %.cc
|
|
${COMPILE.c} -o $@ $<
|
|
$(CHMOD) -f g+w $@
|
|
|
|
${ARCH}/%.o: %.s
|
|
${COMPILE.c} -DASM -o $@ $<
|
|
$(CHMOD) -f g+w $@
|
|
|
|
${ARCH}/%.o: %.S
|
|
$(CP) $*.s $(ARCH)/$*.c
|
|
$(CPP) $(CPPFLAGS) $(ARCH)/$*.c > $(ARCH)/$*.s
|
|
${COMPILE.c} -o $@ $(ARCH)/$*.s
|
|
$(CHMOD) -f g+w $@
|
|
$(RM) $(ARCH)/$*.c
|
|
|
|
# Specify our own default rule for this to prevent having CFLAGS and
|
|
# CPPFLAGS being passed to linker
|
|
${ARCH}/%: ${ARCH}/%.o
|
|
${CC} ${LDFLAGS} -o $@ $@.o ${LD_LIBS}
|
|
$(CHMOD) -f g+w $@
|
|
|
|
# Make foo.rel from foo.o
|
|
${ARCH}/%.rel: ${ARCH}/%.o
|
|
${LD} $(LDFLAGS_INCOMPLETE) -o $@ $^
|
|
$(CHMOD) -f g+w $@
|
|
|
|
# create $(ARCH)/pgm from pgm.sh
|
|
${ARCH}/%: %.sh
|
|
$(RM) $@
|
|
$(CP) $< $@
|
|
$(CHMOD) +x $@
|
|
$(CHMOD) -f g+w $@
|
|
|
|
# Dependency files for use by gmake
|
|
# NOTE: we don't put in $(TARGET_ARCH)
|
|
# so that 'make clean' doesn't blow it away
|
|
|
|
DEPEND=Depends-$(TARGET_ARCH:o-%=%)
|
|
|
|
CLEAN_DEPEND=$(DEPEND).tmp
|
|
CLOBBER_DEPEND=$(DEPEND)
|
|
|
|
# We deliberately don't have anything depend on the
|
|
# $(DEPEND) file; otherwise it will get rebuilt even
|
|
# on 'make clean'
|
|
#
|
|
|
|
depend: $(C_FILES) $(CC_FILES) $(S_FILES)
|
|
ifneq ($(words $(C_FILES) $(CC_FILES) $(S_FILES)), 0)
|
|
# Use gcc -M to generate dependencies
|
|
# Replace foo.o with $(ARCH)/foo.o
|
|
# Replace $(ARCH) value with string $(ARCH)
|
|
# so that it will for debug and profile cases
|
|
$(COMPILE.c) -Hmake $^ | \
|
|
$(SED) -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
|
|
-e 's?$(ARCH)/?$$(ARCH)/?' >$(DEPEND).tmp
|
|
|
|
$(MV) $(DEPEND).tmp $(DEPEND)
|
|
$(CHMOD) -f g+w $(DEPEND)
|
|
endif
|
|
|
|
|
|
# spell out all the LINK_FILE's, rather than using -lbsp, so
|
|
# that $(LINK_FILES) can be a dependency
|
|
|
|
# Start file must be one of
|
|
# $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o
|
|
# $(PROJECT_RELEASE)/lib/asmiface$(LIB_VARIANT).o
|
|
# It defaults to start.o, but an app can override it.
|
|
|
|
# Note: Normally RTEMS provides a start file...
|
|
START_FILE= $(PROJECT_RELEASE)/lib/crt0$(LIB_VARIANT).o $(PROJECT_RELEASE)/lib/register$(LIB_VARIANT).o
|
|
|
|
LIBC_LOW= $(PROJECT_RELEASE)/lib/libcsupport$(LIBSUFFIX_VA)
|
|
|
|
LIBGCC = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name $(GCCSED))
|
|
|
|
LIBOSBOOT=/home/src/amd29k/sps2000/netrom.o
|
|
|
|
LINK_FILES= \
|
|
$(START_FILE) \
|
|
$(OBJS) \
|
|
$(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel) \
|
|
$(PROJECT_RELEASE)/lib/libbsp$(LIBSUFFIX_VA) \
|
|
$(LD_LIBS) \
|
|
$(PROJECT_RELEASE)/lib/libtest$(LIBSUFFIX_VA) \
|
|
$(PROJECT_RELEASE)/lib/librtems$(LIBSUFFIX_VA) \
|
|
$(LIBC_LOW) \
|
|
$(PROJECT_RELEASE)/lib/libmisc$(LIBSUFFIX_VA) \
|
|
$(LIBC_LIBC) \
|
|
$(LIBC_EXTRALIBS) \
|
|
$(LIBC_LIBM)
|
|
# /home/craigl/osbdbg.o
|
|
|
|
# Here is the rule to actually build a $(ARCH)/foo.exe
|
|
# It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm
|
|
# Usage ref: src/tests/sptest/sp1/Makefile
|
|
|
|
define make-exe
|
|
if [ $(NO_ROM) ]; then echo "\n\nskipping ROM compile\n"; else \
|
|
$(CC) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink -u _times -u _gettimeofday \
|
|
-u _sleep -o $(basename $@).out $(LIBOSBOOT) $(LINK_FILES); \
|
|
romcoff -r -t -l -b $(basename $@).out raminit.o; \
|
|
rm $(basename $@).out; \
|
|
$(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).romcof $(LIBOSBOOT) \
|
|
$(LINK_FILES) raminit.o -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink > $(basename $@).rommap ; \
|
|
rm raminit.o ; \
|
|
$(CHMOD) -f g+w $(basename $@).romcof; \
|
|
/opt/green/coff2sr -noS5 $(basename $@).romcof -o $(basename $@).srec; \
|
|
$(CHMOD) -f g+w $(basename $@).srec; \
|
|
fi
|
|
if [ $(CREATE_MAP) ]; then \
|
|
$(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink > $(basename $@).rammap; \
|
|
else \
|
|
rm $(basename $@).rommap > /dev/null 2> /dev/null ; \
|
|
$(CC) -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink; \
|
|
fi
|
|
$(CHMOD) -f g+w $(basename $@).exe
|
|
# $(CC) -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd/opt/29k/lib/link030.cmd
|
|
$(NM) -g $(basename $@).exe > $(basename $@).num
|
|
$(CHMOD) -f g+w $(basename $@).num
|
|
# $(SIZE) $(basename $@).exe
|
|
endef
|
|
|
|
define make-rel
|
|
$(LD) $(LDFLAGS_INCOMPLETE) $(XLDFLAGS) -o $@ $(OBJS)
|
|
$(CHMOD) -f g+w $@
|
|
endef
|