<corsepiu@faw.uni-ulm.de>:
The patch below provides
* automake support for score/cpu/powerpc
* The hack to propagate values from *.cfg to automake configuration
* A fix for librdbg/powerpc/mcp750/Makefile.am (Was completely corrupted
before)
* Fixes some files which apparently where missing in
rtems-rc-19991123-rc-2.diff
* some minor configuration related patches
To apply:
rm -rf ./c/src/exec/score/cpu/powerpc/wrap
patch -p1 < rtems-rc-19991123-rc-3.diff
Attention:
c/src/exec/score/cpu/[configure.in|aclocal.m4|configure] should be
removed after applying the patch.
Modifications had been made to the score/cpu/powerpc directory after
the snapshot this was based on. In particular, the mpc750 and
other_cpu directories had been renamed to new_exception_processing
and old_exception_processing. After this patch was applied, modifications
were made to account for this.
<corsepiu@faw.uni-ulm.de>:
The patch below provides
* automake support for score/cpu/powerpc
* The hack to propagate values from *.cfg to automake configuration
* A fix for librdbg/powerpc/mcp750/Makefile.am (Was completely corrupted
before)
* Fixes some files which apparently where missing in
rtems-rc-19991123-rc-2.diff
* some minor configuration related patches
To apply:
rm -rf ./c/src/exec/score/cpu/powerpc/wrap
patch -p1 < rtems-rc-19991123-rc-3.diff
Attention:
c/src/exec/score/cpu/[configure.in|aclocal.m4|configure] should be
removed after applying the patch.
Modifications had been made to the score/cpu/powerpc directory after
the snapshot this was based on. In particular, the mpc750 and
other_cpu directories had been renamed to new_exception_processing
and old_exception_processing. After this patch was applied, modifications
were made to account for this.
<corsepiu@faw.uni-ulm.de>:
The patch below provides
* automake support for score/cpu/powerpc
* The hack to propagate values from *.cfg to automake configuration
* A fix for librdbg/powerpc/mcp750/Makefile.am (Was completely corrupted
before)
* Fixes some files which apparently where missing in
rtems-rc-19991123-rc-2.diff
* some minor configuration related patches
To apply:
rm -rf ./c/src/exec/score/cpu/powerpc/wrap
patch -p1 < rtems-rc-19991123-rc-3.diff
Attention:
c/src/exec/score/cpu/[configure.in|aclocal.m4|configure] should be
removed after applying the patch.
system table from when the rtems_filesystem_operations_table structure changed
and the initializer in libnetworking/lib/tftpDriver.c did not get
updated.
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/a29k/wrap
rm -rf c/src/exec/score/cpu/hppa1.1/wrap
rm -rf c/src/exec/score/cpu/i386/wrap
rm -rf c/src/exec/score/cpu/mips64orion/wrap
rm -rf c/src/exec/score/cpu/no_cpu/wrap
patch -p1 < rtems-rc-19991123-rc-2.diff.gz
Notes:
* I don't see a possiblity to convert the powerpc subdirectory in its
current layout to automake the time being.
* Besides the fact that this subdirectory is not in single-tree building
layout, the actual showstopper is the ifeq $(RTEMS_CPU_MODEL),mpc750)
gmake-conditional in powerpc/Makefile.in, which automake (correctly)
refuses to handle.
* The problem is *not* specific to the powerpc. Other CPUs basically
have similar problems (SH:sh7032 vs sh7045, SPARC: erc32.h in
score/cpu/sparc), but have been lucky to get around real issues (cf.
configuration files below score/cpu/sh/).
* From a configuration focused POV this problem boils down to a
file/subdirectory selection problem:
ppc: 1 or others
sh: 1 out of 2
sparc: 1 out of 1
Automake's means to implement such behavior is using conditionals to be
evaluated at configuration-time. The old configuration scheme however
used make-time conditionals. The SH port was lucky to get around this
issue because it applies a selection from a limited set of possible
selections, the powerpc however applies a selection from an unlimited
set, based on data not being available at configuration time.
* Currently I only see two general solutions:
1) make RTEMS_CPU_MODEL available at configuration time, ie. replace
make-time configuration by configuration-time configuration
2) Perform the selection at build-time, i.e. always install all files,
but use #ifdef #else #endif in source files. This is what the m68k has
exploited at other locations inside of the source-tree.
=> This directory is the last one remaining not using automake below the
whole exec/ hierarchy.
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/a29k/wrap
rm -rf c/src/exec/score/cpu/hppa1.1/wrap
rm -rf c/src/exec/score/cpu/i386/wrap
rm -rf c/src/exec/score/cpu/mips64orion/wrap
rm -rf c/src/exec/score/cpu/no_cpu/wrap
patch -p1 < rtems-rc-19991123-rc-2.diff.gz
Notes:
* I don't see a possiblity to convert the powerpc subdirectory in its
current layout to automake the time being.
* Besides the fact that this subdirectory is not in single-tree building
layout, the actual showstopper is the ifeq $(RTEMS_CPU_MODEL),mpc750)
gmake-conditional in powerpc/Makefile.in, which automake (correctly)
refuses to handle.
* The problem is *not* specific to the powerpc. Other CPUs basically
have similar problems (SH:sh7032 vs sh7045, SPARC: erc32.h in
score/cpu/sparc), but have been lucky to get around real issues (cf.
configuration files below score/cpu/sh/).
* From a configuration focused POV this problem boils down to a
file/subdirectory selection problem:
ppc: 1 or others
sh: 1 out of 2
sparc: 1 out of 1
Automake's means to implement such behavior is using conditionals to be
evaluated at configuration-time. The old configuration scheme however
used make-time conditionals. The SH port was lucky to get around this
issue because it applies a selection from a limited set of possible
selections, the powerpc however applies a selection from an unlimited
set, based on data not being available at configuration time.
* Currently I only see two general solutions:
1) make RTEMS_CPU_MODEL available at configuration time, ie. replace
make-time configuration by configuration-time configuration
2) Perform the selection at build-time, i.e. always install all files,
but use #ifdef #else #endif in source files. This is what the m68k has
exploited at other locations inside of the source-tree.
=> This directory is the last one remaining not using automake below the
whole exec/ hierarchy.
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/a29k/wrap
rm -rf c/src/exec/score/cpu/hppa1.1/wrap
rm -rf c/src/exec/score/cpu/i386/wrap
rm -rf c/src/exec/score/cpu/mips64orion/wrap
rm -rf c/src/exec/score/cpu/no_cpu/wrap
patch -p1 < rtems-rc-19991123-rc-2.diff.gz
Notes:
* I don't see a possiblity to convert the powerpc subdirectory in its
current layout to automake the time being.
* Besides the fact that this subdirectory is not in single-tree building
layout, the actual showstopper is the ifeq $(RTEMS_CPU_MODEL),mpc750)
gmake-conditional in powerpc/Makefile.in, which automake (correctly)
refuses to handle.
* The problem is *not* specific to the powerpc. Other CPUs basically
have similar problems (SH:sh7032 vs sh7045, SPARC: erc32.h in
score/cpu/sparc), but have been lucky to get around real issues (cf.
configuration files below score/cpu/sh/).
* From a configuration focused POV this problem boils down to a
file/subdirectory selection problem:
ppc: 1 or others
sh: 1 out of 2
sparc: 1 out of 1
Automake's means to implement such behavior is using conditionals to be
evaluated at configuration-time. The old configuration scheme however
used make-time conditionals. The SH port was lucky to get around this
issue because it applies a selection from a limited set of possible
selections, the powerpc however applies a selection from an unlimited
set, based on data not being available at configuration time.
* Currently I only see two general solutions:
1) make RTEMS_CPU_MODEL available at configuration time, ie. replace
make-time configuration by configuration-time configuration
2) Perform the selection at build-time, i.e. always install all files,
but use #ifdef #else #endif in source files. This is what the m68k has
exploited at other locations inside of the source-tree.
=> This directory is the last one remaining not using automake below the
whole exec/ hierarchy.
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/i960/wrap
rm -rf c/src/exec/score/cpu/m68k/wrap
rm -rf c/src/exec/score/cpu/sh/wrap
rm -rf c/src/exec/score/cpu/sparc/wrap
rm -rf c/src/exec/score/cpu/unix/wrap
patch -p1 < rtems-rc-19991123-rc-1.diff
./bootstrap
Known bugs:
* "make debug|profile" in c/src/src/score/cpu/<RTEMS_CPU/Makefile does
not handle recursion to subdirectories correctly (recurses too often).
However, this issue is hardly visible and should be tolerable for the
moment.
<corsepiu@faw.uni-ulm.de> which implements automake support for some
score/cpu/<RTEMS_CPU> subdirectories and fixes a few minor configuration
bugs.
To apply:
rm -rf c/src/exec/score/cpu/i960/wrap
rm -rf c/src/exec/score/cpu/m68k/wrap
rm -rf c/src/exec/score/cpu/sh/wrap
rm -rf c/src/exec/score/cpu/sparc/wrap
rm -rf c/src/exec/score/cpu/unix/wrap
patch -p1 < rtems-rc-19991123-rc-1.diff
./bootstrap
Known bugs:
* "make debug|profile" in c/src/src/score/cpu/<RTEMS_CPU/Makefile does
not handle recursion to subdirectories correctly (recurses too often).
However, this issue is hardly visible and should be tolerable for the
moment.
Tomasz only tested this on the mpc823.
The official site for the original source for this PPP implementation is:
ftp://cs.anu.edu.au/pub/software/ppp
NOTE: As of 11/30/1999, the current version of this source is 2.3.10.
which (among other things) converted the mptests to automake.
SUB_DIRS was used instead of SUBDIRS in some Makefile.ins
(apparently a leftover from moving the start* directories)
Addtional major bugs:
* psxtests/include was empty (incomplete psxtests changes).
* bogus handling of *.scn in itrontests (screens/sptests vs.
screens/itrontests installation dirs)
In addition I have added a few more changes (I couldn't resist)
* automake support for itrontests
* OPERATION_COUNT support in tmitrontests/
* automake support for tmitrontests
* automake suppport for mptests
* Some (minor) corrections to several configure.in/Makefile.ams
=> c/src/tests/ is completly under automake control, now.
=> we could start to sort out the structural issues with c/src/tests
(tests/support, stubdr, tools, get "make dist" working)
* the PACKHEX etc problem
* prevents the *.rels being removed inside the build-tree
* a typo which only shows for when MP is activated
* Alters some custom/*cfg files
