* clock/clock.c, startup/bspstart.c: Eliminate PowerPC specific
elements from the CPU Table. They have been replaced with variables
named bsp_XXX as needed.
Add Embedded Planets EP5200 which is the same as the Freescale
5200Lite (a.k.a. IceCube) evaluation board.
* Makefile.am: Add linkcmds.ep5200.
Add -DMPC5200_BAPI_LIBC_HEADERS to remove some warnings in bestcomm.
* preinstall.am: Add linkcmds.ep5200.
* clock/clock.c: Correct math for prescaler/counter when bus speed
is high enough to require multiple passes of loop.
* console/console.c: Use same math for initial baud rate as when it
is changed via ioctl. When HAS_UBOOT is defined, initialize console
to the same baud as it was with U-Boot.
* include/bsp.h: Add EP5200 and console boot baud support.
* include/mpc5200.h: Spacing.
* startup/bspstart.c: If HAS_UBOOT and SHOW_MORE_INIT_SETTINGS are
both defined, dump the U-Boot BD info structure.
* vectors/vectors.S: ep5200 cannot use vectors segment. When loading
it, U-Boot freezes. Besides, U-Boot can automatically start the BSP
so we do not have to run from board reset.
* startup/linkcmds.ep5200: New file.
* clock/clock.c, console/console.c, ide/pcmcia_ide.c, irq/irq.c,
irq/irq.h, irq/irq_asm.S, irq/irq_init.c, nvram/nvram.c,
nvram/nvram.h, slicetimer/slicetimer.c, startup/bspstart.c,
vectors/vectors.h, vectors/vectors_init.c: Correct license URL and/or
fix mistake in copyright notice. Both of these mistakes appear to be
from code submitted after these changes were made previously.
