The macro Install_tm27_vector() included an extern for tm27IrqData
inside the scope of the macro. This generated a "nested extern
declaration warning. Moved the extern outside the scope.
The PowerPC has both 32 and 64 bit CPUs within a single architecture
and collection of BSPs. This change set addresses cases where the
format specifier, type, or cast was not correct or portable across
32 and 64 bit environments.
The gen5200, gen83xx, and tqm8xx BSP families have multiple variants
which produced the same stray semi-colon warning from GCC 15 for
using LINKER_SYMBOLS() with a semi-colon at the end of the line.
Closes#5277.
This zlib source is a hacked down version just for the decompression
phase for the bootloader used by this family of BSPs. The proper
fix is to redo the hackery with a new version of zlib. But that
is risky so this is just addressing the warnings.
Updates #5276
Applied suggested formatting changes to the following files which
were modified for technical reasons in the previous commit.
bsps/powerpc/gen5200/include/tm27.h
bsps/powerpc/mvme5500/include/tm27.h
bsps/powerpc/psim/include/tm27.h
The gen5200, mvme5500, and psim BSP families had an implementation of
tm27.h which used stub functions with casts as null handlers to fill
in the IRQ structure. The IRQ structure as also missing a field. The
change was to use a set of appropriately signatured stub functions
and correct the structure initialization.
This code likely has produced warnings for a long time but with
GCC 14, these warnings turned into errors.
Closes#5266
This is an update of many lingering embedded brains GmbH licenses from
the RTEMS License to the 2-BSD license where possible depending on the
joint copyrights.
Updates #3053.
This is an update of IMD (precursor to embedded brains) licenses from
the RTEMS License to the 2-BSD license where possible depending on the
joint copyrights.
Updates #3053.
For example, with edge triggered external interrupts we may see spurious
interrupts. Ignore them instead of issuing a fatal error.
Use eieio to synchronize access to the IACK and EOI registers.
Use a loop to immediately services the next pending interrupt without
having to go through the exception epiloge and prologue.
Close#5172.
Add directives to get and set the priority of an interrupt vector.
Implement the directives for the following BSP families:
* arm/lpc24xx
* arm/lpc32xx
* powerpc/mpc55xxevb
* powerpc/qoriq
Implement the directives for the following interrupt controllers:
* GICv2 and GICv3 (arm and aarch64)
* NVIC (arm)
* PLIC (riscv)
Update #5002.
Move declarations of bsp_interrupt_get_affinity() and
bsp_interrupt_set_affinity() to <bsp/irq-generic.h>. Canonicalize the
<bsp/irq.h> includes.
Implement bsp_interrupt_get_affinity() and bsp_interrupt_set_affinity() only if
needed (usually RTEMS_SMP).
Provide stub implementations for i386 to fix build errors.
Pass the parameter of the clock interrupt handler to
Clock_driver_support_at_tick() and Clock_driver_timecounter_tick(). This makes
it possible to use the interrupt handler argument in clock drivers.
Use the interrupt handler provided by Clock_driver_support_install_isr() to
avoid local delarations of Clock_isr().
Update #4862.
