Martin Aberg
6ecad1d526
leon, grspw_pkt: Preserve DMA address enable at start.
...
The EN bit (enable separate node address for this channel) is preserved when
grspw_dma_start is called. This preserves any previous address configuration.
2017-03-06 07:54:55 +01:00
Martin Aberg
a48bfc0ffa
leon, grspw_pkt: Fixed txpkt flag for link error
...
There was a mixup between the transmit descriptor Link error (LE) bit and
Interrupt enable (IE) bit. TXPKT_FLAG_LINKERR now correctly indicates the link
error condition.
2017-03-06 07:54:55 +01:00
Martin Aberg
3395ca9912
leon, grspw_pkt: Fixed parameter check in grspw_dma_open()
2017-03-06 07:54:55 +01:00
Daniel Hellstrom
4431f7d262
leon, gr1553b: RT status words register declarations fix
...
The fix does not affect the driver since the bit definitions
were never used by the GR5133B drivers. However it could affect
and application using the definitions.
2017-03-06 07:54:55 +01:00
Daniel Hellstrom
d7452976e4
leon, gr1553b: comment cleanup
2017-03-06 07:54:55 +01:00
Daniel Hellstrom
be66bbc1e8
leon, grspw: rxPktSize must set DMA RX max length
2017-03-06 07:54:55 +01:00
Sebastian Huber
c0dafd7ba3
bsp/qoriq: Use at most 2GiB of RAM
2017-03-02 16:53:45 +01:00
Sebastian Huber
d3f60afbfe
bsp/qoriq: Adjust workspace according to FDT
2017-03-02 15:25:34 +01:00
Sebastian Huber
35136d3d4e
bsp/qoriq: Use -O2
2017-03-02 15:20:52 +01:00
Sebastian Huber
62f16ad4e3
bsp/qoriq: Enable linker garbage collection
2017-03-02 15:20:19 +01:00
Sebastian Huber
891b834fb5
bsp/qoriq: Do not overwrite configured baud
2017-03-02 15:17:35 +01:00
Sebastian Huber
805d721304
powerpc: Fix warnings
2017-03-02 12:02:49 +01:00
Sebastian Huber
09dab28da0
powerpc: Fix interrupt thread dispatch
...
Update #2751 .
2017-03-02 12:02:49 +01:00
Sebastian Huber
08d8599245
bsps/powerpc: Fix warnings
2017-03-01 11:31:57 +01:00
Sebastian Huber
33986022af
Add rtems_interrupt_server_request_submit()
...
This function may be used to do a two-step interrupt processing. The
first step is done in interrupt context which calls this function. The
second step is then done in the context of the interrupt server.
2017-02-23 07:27:39 +01:00
Sebastian Huber
11f0d528b5
bsp/xilinx-zynq: Add interrupt support to UART
2017-02-22 14:20:33 +01:00
Sebastian Huber
6b2fcc40ac
bsp/xilinx-zynq: Use new Termios device driver
2017-02-21 12:11:44 +01:00
Sebastian Huber
7318e7db91
bsp/lpc24xx: Remove debug output
2017-02-15 13:41:02 +01:00
Sebastian Huber
6afeedaa71
bsps/powerpc: Fix warnings
2017-02-15 13:39:02 +01:00
Sebastian Huber
f6f764c131
bsps/powerpc: Fix warnings
2017-02-15 13:28:02 +01:00
Sebastian Huber
32292d5d7c
bsps/powerpc: Fix warning
2017-02-15 13:14:40 +01:00
Sebastian Huber
bc74461882
bsps/sparc: Fix warnings
2017-02-15 12:57:56 +01:00
Sebastian Huber
444cb5cd23
bsps/arm: Fix prototype
2017-02-15 11:12:57 +01:00
Sebastian Huber
73f8d93847
bsps/powerpc: Fix warnings
2017-02-15 11:09:50 +01:00
Christian Mauderer
180107e971
bsps/arm: Fix Cortex-M DWT CPU counter.
...
It is necessary to enable the DWT using a special initialization
sequence before the CYCCNT can be enabled. See for example the
RESET_CYCLE_COUNTER in libbsp/arm/atsam/utils/utility.h.
Note that this problem only occurs if no debugger is connected. A
debugger most likely already enables the necessary module.
2017-01-30 11:35:31 +01:00
Kevin Kirspel
b43c2e8952
Adding ARM VFP V2 support
2017-01-24 15:42:05 +01:00
Sebastian Huber
2711914f82
Use <sys/endian.h>
...
Update #2803 .
2017-01-24 08:39:22 +01:00
Kevin Kirspel
2f8f951b42
bsp/lpc32xx: Fix interrupt controller suppport
...
Enable/Disable vector routines now check for a valid vector. Without
these guards, the Enable/Disable vector routines will not work with the
interrupt server.
2017-01-24 07:09:55 +01:00
Sebastian Huber
7fbd72cb00
libchip: Really fix high capacity detection
...
Update #2239 .
2017-01-20 15:29:00 +01:00
Sebastian Huber
e8606d5b90
bsp/beatnik: Remove superfluous check
...
Close #2874 .
2017-01-20 14:23:12 +01:00
Gedare Bloom
2126789736
raspberrypi: fix math inside of sizeof
...
Move the subtraction of 1 for terminator outside of
sizeof operator.
Closes #2731 .
2017-01-19 15:37:13 -05:00
Gedare Bloom
70e8abf391
raspberrypi: use signed int for return variable
...
Closes #2873 .
2017-01-19 15:34:18 -05:00
Gedare Bloom
3f09d63548
smdk2410: delete unused variables
...
Closes #2868 .
2017-01-19 12:58:44 -05:00
Joel Sherrill
e397122cf4
m68k/mcf5225x/*/mc525x5-testsuite.tcfg: Add cdtest
2017-01-17 17:59:07 -06:00
Joel Sherrill
900f9857eb
m68k/mcf52235/*/mc52235-testsuite.tcfg: Add cdtest
2017-01-17 17:59:05 -06:00
Joel Sherrill
96ba863df0
arm/lpc32xx/*/lpc32xx_mzx_stage_1-testsuite.tcfg: Add dl05
2017-01-17 17:59:03 -06:00
Joel Sherrill
79ec730e09
powerpc/mpc55xxevb/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:59:02 -06:00
Joel Sherrill
09f6666b21
m68k/mcf5225x/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:59:02 -06:00
Joel Sherrill
dd14b45045
m68k/mrm332/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:59:02 -06:00
Joel Sherrill
ba61311eb7
m68k/mcf52235/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:59:02 -06:00
Joel Sherrill
ddb2812791
arm/stm32f4/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:59:02 -06:00
Joel Sherrill
9c834d1142
arm/lpc24xx/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:59:00 -06:00
Joel Sherrill
ed1dcd28d6
arm/lpc32xx/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:58:58 -06:00
Joel Sherrill
2414497fcb
arm/lpc176x/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:58:55 -06:00
Joel Sherrill
6c420403c8
arm/lm3s69xx/*.tcfg: Add fsjffs2gc01 to excluded tests
2017-01-17 17:58:52 -06:00
Joel Sherrill
1fcdd639ee
powerpc/shared/linkcmds.base: Add .rela.rtemsroset and .rela.rtemsrwset
2017-01-16 10:40:11 -06:00
Sebastian Huber
2a583a0079
atsam: Fix SC16IS752 documentation
2017-01-16 13:13:36 +01:00
Christian Spindeldreier
a1e4e3bf31
GRETH: Interrupt Handler Uses Wrong Events
...
closes #2796 .
2017-01-12 09:36:26 -06:00
Joel Sherrill
48a7fa31f9
Remove texinfo format documentation. Replaced by Sphinx formatted documentation.
...
closes #2812 .
2017-01-11 12:13:21 -06:00
Sebastian Huber
81af80e586
Rename *.s to *.S
...
Consistently use *.S for assembler files.
Close #2701 .
2016-12-20 10:31:06 +01:00
