When a buffer is modified by both hardware components such as DMA and by
software components, the buffer cache state must be kept in sync so that
data is not accidentally thrown away during future invalidations.
When polling hardware registers in high performance situations, don't
rely on usleep or other standard sleep functions since they will
necessarily rely on kernel ticks to be woken up. This can easily cause
an immense reduction in throughput.
The changes here ensure correct cache maintenance around DMA operations.
One cache flush was missing and two cache invalidations occurred before
the corresponding read that would make them necessary.
Fixes the following Coverity warning:
** CID 1539495: Integer handling issues (CONSTANT_EXPRESSION_RESULT)
/bsps/shared/dev/rtc/mcp7940m.c: 317 in mcp7940m_set_time()
Basically coverity warns that (buf[...] & 0x7) can't be bigger than 7.
Just remove the unnecessary comparison.
The MCP7940M is a I2C RTC chip. The new driver uses the dev/i2c API to
support the RTC. It is written with the intention, that the driver can
be adapted to other RTCs with a similar register layout by just
replacing the initialization function.
The NOR driver was not written with SMP systems and caching in mind.
This makes the IsBusy flag volatile for updates across cores and
introduces cache flushing and invalidation where necessary for data
manipulated by the DMA engine in the QSPI peripheral.
When given the exact bounds of a sector, the current algorithm
calculates that 3 sectors need to be erased. This corrects the
calculation such that only 1 sector needs to be erased for erasures that
exactly match sector boundaries.
This change causes NOR writes to be broken according to page boundaries.
Writes across page boundaries cause the writes beyond the boundary to
fail silently. This also introduces a new function that will explicitly
write pages.
Add <rtems/termiosdevice.h> which does not depend on <rtems/libio.h> to
provide rtems_termios_device_context and rtems_termios_device_handler.
For polled serial device drivers, this removes a header file dependency
to the full file system support.
If a different chip variant is used in the i.mxrt BSP, a different
header would have to be included. Make sure that the fsl-edma driver
uses a header that doesn't have to be adapted.
The library is imported in minimalist version just to support future
amd64efi BSP.
The FreeBSD tree commit id with imported libefi version is:
ce7b20e5129cf0f269951b313d336a9c7d54d790
This adds helper functions for working with NOR flash connected to the
Xilinx GQSPI controller. The helper functions are based on Xilinx's
QSPIPSU flash interrupt example.
This adds Xilinx's driver for the Xilinx GQSPI controller embedded in
the ZynqMP SoC. Within that device alone, it is possible to access this
peripheral from MicroBlaze, ARMv7, and ARMv8 cores. The imported files
are and should be able to remain unmodified. Import information is kept
in bsps/shared/dev/spi/VERSION.
The address of the nandpsu peripheral is specific to the ZynqMP SoC and
not relevant to other devices that might have one or more instances of
this peripheral.
This adds Xilinx's driver for the Xilinx NAND controller embedded in the
ZynqMP SoC. Within that device alone, it is possible to access this
peripheral from MicroBlaze, ARMv7, and ARMv8 cores. This has been added
to the hardware ZynqMP BSPs since QEMU does not support emulation of
this peripheral. This driver supports polled operation only. The
imported files are and should be able to remain unmodified. Import
information is kept in bsps/shared/dev/nand/VERSION.
This support code is necessary for many Xilinx-provided bare metal device
drivers supported on ARM, AArch64, and MicroBlaze platforms. Support for
all of these architectures is kept under bsps/include due to multiple
architecture variants being supported which requires complex logic in
the build system. The imported files are and should be able to remain
unmodified. Import information is kept in bsps/shared/xil/VERSION.
This enables the tracing of interrupt entry/exit events through an
application configuration option. The interrupt processing can be
viewed with Trace Compass using rtems-record-lttng from the RTEMS Tools.
Update #4769.
This patch changes the license to BSD-2 for all source files where the
copyright is held by Aeroflex Gaisler, Cobham Gaisler, or Gaisler Research.
Some files also includes copyright right statements from OAR and/or
embedded Brains in addition to Gaisler.
Updates #3053.
If the bsp is integrated and supported a device tree
blob(dtb) then use dtb instead of using it from
the U-Boot (BSP_START_COPY_FDT_FROM_U_BOOT=False).
