The flash configuration is something very board specific. So move the
file to a board specific location. Beneath that, not all controllers and
configurations need the flash config right at the address 0 of the
flash. For example on the i.MXRT11xx, the config has an offset for some
flash types.
This adds support for the STM32H750B-DK discovery kit. This kit includes
a built-in STLINKv3 debugger which provides a USB serial bridge for
USART3. USART1 is routed to the Arduino header and USART2 is routed to
the STMOD connector. This BSP reuses what would otherwise be duplicated
files from the stm32h747i-disco BSP. Note that system_stm32h7xx.c has
been imported from the STM repository with two minor changes wrapped
with #if __rtems__. This hardware has been tested with hello and ticker.
Remove the BSP_POWER_DOWN_AT_FATAL_HALT BSP option. Applications should
do the customization of the system termination with an initial fatal
extension.
QEMU is known to fail certain tests intermittently due to clock tick
delivery issues. This defines those tests as intermittent for BSPs
intended to run on QEMU alone.
Updates #4922
Updates #4072
The number of GPIO devices along with each of their particular
configurations is application-specific. Encoding this information as
build options also introduced a lot of clutter.
The new amd64efi BSP supports:
- multiboot2 boot format. Runs well with GRUB.
- console based on either EFI simple text output or GOP-based framebuffer
- clock based on EFI event/timer API
- early console using either hard-wired PC-AT serial or just memory buffer
- with EFI support disabled the BSP is more or less equivalent to amd64 BSP
with multiboot2 support
Do not warn about excessive shifts in imported Xilinx driver code when
building with the ILP32 ABI. The two instances of this warning produce
the desired effect of setting the upper address bits to 0.
This allows any builds targeting an installed RTEMS BSP to override
headers in the installed BSP reliably, including headers previously
installed by that or other builds. This includes applications, network
stacks, libraries, and any other builds.
Closes#4896
This patch includes the spec/build options for the riscv kendrytek210
BSP variant. It includes options to allow the frdme310arty console
UART to be used on multiple BSPS, device tree options, memory
options, and other required options for the variant.
Updates #4876
