PR 1778/bsps
* vme/VMEConfig.h: Used the VME shared IRQ handlers.
* include/bsp.h: Removed BSP_PIC_DO_EOI.
* network/if_100MHz/GT64260eth.c:
Recycle the Rx mbuf if there is any Rx error.
PR 1768/bsps
* shared/irq/irq_asm.S: The nbench benchmark highlighted the fact that
we do not perform a cld before calling C code in the ISR. This was
historically not a problem but gcc 4.3 changed the behavior. From
http://gcc.gnu.org/gcc-4.3/changes.html
PR 1748/bsps
* clock/ckinit.c, include/leon.h: When the clock tick generates an
interrupt WHILE we have interrupts disabled doing a get TOD or
uptime, the get nanoseconds handler was returning a bogusly large
number.
PR 1748/bsps
* clock/ckinit.c: When the clock tick generates an interrupt WHILE we
have interrupts disabled doing a get TOD or uptime, the get
nanoseconds handler was returning a bogusly large number.
PR 1492/bsps
* shared/startup/sbrk.c: When BSP_sbrk_policy had the value (-1)
(-> give all memory to the heap initially) then the computation
of the remaining heap size was wrong.
* Makefile.am, configure.ac, preinstall.am, console/alloc360.c,
console/config.c, console/console.c, console/m68360.h,
console/mc68360_scc.c, console/rsPMCQ1.c, console/rsPMCQ1.h,
include/bsp.h, irq/irq_init.c, irq/openpic_xxx_irq.c, start/start.S,
startup/bspstart.c, startup/linkcmds, vme/VMEConfig.h:
Updated and tested against RTEMS 4.9. Updated README file to latest
source status. Modified to use the shared irq source code. Turned off
debugging, cleaned up warnings, removed unused code. Tested with two
PMCQ1 serial cards. Tested MC68360 serial ports and VME using
external tests.
* README, irq/irq.h, vme/vmeconfig.c: New files.
* configure.ac: Default to having PSC8 mezzanine so code builds
all the time.
* startup/bspstart.c: Calibrated clock using an VMEBus controlled
discrete pulsed at a 20ms rate.
PR 1451/bsps
* network/tsec.c: Fix mbuf leak when watchdog expires. The
re-initialization algorithm failed to release mbuf chains
held in the TX ring.
Also, during initialization the initial link status is determined
and IFF_OACTIVE set if no active link was detected.
PR 1344/bsps:
* clock/ckinit.c: Fix more bugs (applied PR1344/attachment 702):
TSC handler was used when 8254 was requested and vice versa.
Also, nanosecond handler was never installed to RTEMS clock.
* startup/bspstart.c: Added dummy implementation of firmware
syscalls for use with QEMU. Dummy handler is installed if no
pre-existing firmware handler is found.
* network/tsec.c, network/if_tsec_pub.h:
Fixed bugs in multicast support; added reference-count
for hash-table entries which allows for the implementation
of a 'deletion' routine.
NOTE: mcast support largely untested.
Turn on buffered writes to DRAM. As Device Errata SECF124 notes this may cause
double writes, but that's not really a big problem and benchmarking tests have
shown that buffered writes do gain some performance.
