* custom/Makefile.am: Modified to reflect addition of files.
* custom/erc32.cfg: Modified to support addition of no-FP ERC32 variant.
* custom/erc32nfp.cfg, custom/leon1.cfg, custom/leon2.cfg: New file.
* custom/p4600.cfg, custom/p4650.cfg: Commented out RTEMS_CPU
definition since this information can be picked up from
autoconf generated files. These BSPs are shared by the
mips and mips64orion "ports."
* custom/mbx860_005b.cfg (make-target-options): Add lines to
define PRINTK_MINOR SMC1_MINOR and PRINTK_IO_MODE. The settings
may be incorrect but the BSP now compiles.
* make/custom/pck6.cfg: New file
* make/custom/pc486.cfg: Use -m486
* make/custom/pc586.cfg: Use -mpentium
* make/custom/pc686.cfg: Use -mmpentiumpro
* make/custom/i386ex.cfg: Use -msoft-float
* mbx8xx.cfg: Support for shared printk and no termios.
2000-08-10 John Cotton <john.cotton@nrc.ca>
* mbx8xx.cfg: Support added for dejagnu test harness.
that does the following:
Changes:
Remove $(SED) and $(CP) from make/custom/*.cfg
Motivation:
* autoconf and automake presuppose sed and cp to be present.
* make/host.cfg.in already contains SED = sed hard-coded into it for
a long time.
* Elimination of make-variables
* Eliminate make/*.cfg files or at least reduce their complexity :)
<valette@crf.canon.fr> and Emmanuel Raguet <raguet@crf.canon.fr>
of Canon CRF - Communication Dept. This port includes a
basic BSP that is sufficient to link hello world.
a BSP (c4xsim) supporting the simulator included with gdb. This port
was done by Joel Sherrill and Jennifer Averett of OAR Corporation.
Also included with this port is a space/time optimization to eliminate
FP context switch management on CPUs without hardware or software FP.
An issue with this port was that sizeof(unsigned32) = sizeof(unsigned8)
on this CPU. This required addressing alignment checks and assumptions
as well as fixing code that assumed sizeof(unsigned32) == 4.
that is yet another multilib-related structual cleanup patch:
Changes:
* Make RTEMS_TEST_NO_PAUSE a tests/ subpackage specific option.
- Remove RTEMS_TEST_NO_PAUSE from custom/*.cfg, targopts.h and
cpuopts.h.
- Add autoconf macros RTEMS_*_RTEMS_TEST_NO_PAUSE
(aclocal/rtems-test-no-pause.m4).
- Add RTEMS_*_RTEMS_TEST_NO_PAUSE support to sptests/configure.ins
and tmtests/configure.in. These are the only subdirectories which
currently apply RTEMS_TEST_NO_PAUSE.
- Add autoconf-DEFS support to all test subpackages' configure.ins
below tests/. I.e. AC_DEFINES now get explicitly propagated as
preprocessor defines into Makefiles, cf. AM_CPPFLAGS in
tests/*/*.am, instead of using a global config-files.
- Remove NDEBUG from custom/*.cfg.
* AC_DEFINE POSIX_API, ITRON_API and MULTIPROCESSING in
exec/configure.in, only.
- All other sources now should relay on the values from cpuopts.h
and should not define them themselves.
- Several related changes to many configure.ins
* Bug-fixes to RTEMS_*_RTEMS_DEBUG macros (Actually workarounds to
quoting bugs in autoconf).
Notes:
* This patch is rather immature and only tested for a small subset
of BSPs (requires the tests to be enabled and therefore takes an
tremendous amount of disc space and time.)
* The patches to *cfg were generated by a script. Expect file
formating changes :)
that is yet another multilib-related structual cleanup patch:
Changes:
* Make RTEMS_DEBUG a global per-cpu configuration option
* Remove RTEMS_DEBUG from targopts.h
* Add a global --enable-rtems-debug option disabled by default.
* Add RTEMS_DEBUG to cpuopts.h
* Remove all references to RTEMS_DEBUG from custom/*.cfg
Notes:
* RTEMS_DEBUG is set in c/src/exec/configure.in only
(RTEMS_CHECK_RTEMS_DEBUG) and should be defined in cpuopts.h only.
BSPs should not redefine it, but use the value being provided by
cpuopts.h.
=> With multilibs, users have to choose: Either enable RTEMS_DEBUG
for all BSPs and CPU_MODELs of a cpu or not.
* Only few BSPs had RTEMS_DEBUG enabled, therefore I set the default
to disabled.
* This patch influences the per-BSP building scheme. Existing BSPs
which set RTEMS_DEBUG in their make-target-options rule might have
problems at runtime.
routines and structures that require CPU model specific information
are now in libcpu. This primarily required moving erc32 specific
information from score/cpu files to libcpu/sparc and the erc32 BSP.
routines and structures that require CPU model specific information
are now in libcpu. This required significant rework of the
score/cpu header files and the creation of multiple header files
and subdirectories in libcpu/i960.
that decouples exec/ for the sh, m68k and i960 from targopts.h.
NOTE: The change to system.h is a hack to enable cpuopts.h
for some targets, but keep using targopts.h for others - I know it
does *not* work for sparc, mips, i386 and ppc. This will have
to be addressed as work continues on multilibing.
<charles.gauthier@iit.nrc.ca>, and Darlene A. Stewart
<Darlene.Stewart@nrc.ca> to add support for a number of very
significant things:
+ BSPs for many variations on the Motorola MBX8xx board series
+ Cache Manager including initial support for m68040
and PowerPC
+ Rework of mpc8xx libcpu code so all mpc8xx CPUs now use
same code base.
+ Rework of eth_comm BSP to utiltize above.
John reports this works on the 821 and 860
<charles.gauthier@iit.nrc.ca>, and Darlene A. Stewart
<Darlene.Stewart@nrc.ca> to add support for a number of very
significant things:
+ BSPs for many variations on the Motorola MBX8xx board series
+ Cache Manager including initial support for m68040
and PowerPC
+ Rework of mpc8xx libcpu code so all mpc8xx CPUs now use
same code base.
+ Rework of eth_comm BSP to utiltize above.
John reports this works on the 821 and 860
